diff --git a/src/app/command_driver.rs b/src/app/command_driver.rs
index 1661853a3..8658ec9e1 100644
--- a/src/app/command_driver.rs
+++ b/src/app/command_driver.rs
@@ -1148,8 +1148,19 @@ impl OpenCADStudio {
                 use acadrust::objects::{ObjectType, PlotSettings};
                 let layout_name = self.tabs[i].scene.current_layout.clone();
                 if layout_name == "Model" {
-                    self.command_line
-                        .push_error("PLOTWINDOW: switch to a paper space layout first.");
+                    // Model space: remember the window (world X/Y) for the plot dialog.
+                    let x0 = p1.x.min(p2.x);
+                    let y0 = p1.y.min(p2.y);
+                    let x1 = p1.x.max(p2.x);
+                    let y1 = p1.y.max(p2.y);
+                    self.plot_window = Some((x0, y0, x1, y1));
+                    self.command_line.push_output(&format!(
+                        "Plot window: {x0:.2},{y0:.2} to {x1:.2},{y1:.2}"
+                    ));
+                    // Pick window closed Page Setup so the viewport could
+                    // receive the two clicks — bring it back for scale
+                    // review and the "Plot window → PDF" button.
+                    self.active_modal = Some(super::ModalKind::PageSetup);
                 } else {
                     let block_handle = self.tabs[i].scene.current_layout_block_handle_pub();
                     let doc = &mut self.tabs[i].scene.document;
diff --git a/src/app/commands/display.rs b/src/app/commands/display.rs
index 2023a59fb..7a0dd3e51 100644
--- a/src/app/commands/display.rs
+++ b/src/app/commands/display.rs
@@ -509,13 +509,11 @@ impl OpenCADStudio {
                 }
             }
 
+            // Model space now has its own dialog section (window-plot format /
+            // orientation / pick), so PAGESETUP opens there too, not just on
+            // paper-space layouts.
             "PAGESETUP" => {
-                if self.tabs[i].scene.current_layout == "Model" {
-                    self.command_line
-                        .push_error("PAGESETUP: switch to a paper space layout first.");
-                } else {
-                    return Some(Task::done(Message::PageSetupOpen));
-                }
+                return Some(Task::done(Message::PageSetupOpen));
             }
 
             // ── Recognized commands whose full implementation is pending ─────────
diff --git a/src/app/mod.rs b/src/app/mod.rs
index a143b732f..7e9bd3f90 100644
--- a/src/app/mod.rs
+++ b/src/app/mod.rs
@@ -520,6 +520,10 @@ pub(super) struct OpenCADStudio {
     page_setup_rotation: String,
     /// Plot scale: "Fit" | "1:1" | "1:2" | "1:4" | "1:5" | "1:10" | "1:20" | "1:50" | "1:100" | "2:1".
     page_setup_scale: String,
+    /// Pending model-space plot window (x0, y0, x1, y1) in world XY, or None.
+    plot_window: Option<(f64, f64, f64, f64)>,
+    plot_format: crate::io::paper_sizes::PaperSize,
+    plot_orientation: crate::io::paper_sizes::Orientation,
 
     // ── Plot Style Table ──────────────────────────────────────────────────
     /// Currently loaded CTB/STB table (None = no override).
@@ -1745,6 +1749,14 @@ pub enum Message {
     PlotExport,
     /// Callback after the user picks (or cancels) the export path.
     PlotExportPath(Option<std::path::PathBuf>),
+    /// User picked a paper size for the model-space window plot.
+    PlotFormat(crate::io::paper_sizes::PaperSize),
+    /// User picked a sheet orientation for the model-space window plot.
+    PlotOrientation(crate::io::paper_sizes::Orientation),
+    /// Export the pending model-space plot window (from PLOTWINDOW) to PDF.
+    PlotWindowExport,
+    /// Callback after the user picks (or cancels) the window-export path.
+    PlotWindowExportPath(Option<std::path::PathBuf>),
     /// Send current layout to the system printer (via lp / lpr).
     PrintToPrinter,
     /// Callback from the async printer job.
@@ -2089,6 +2101,9 @@ impl OpenCADStudio {
             page_setup_offset_y: "0.0".to_string(),
             page_setup_rotation: "0".to_string(),
             page_setup_scale: "Fit".to_string(),
+            plot_window: None,
+            plot_format: crate::io::paper_sizes::PaperSize::A4,
+            plot_orientation: crate::io::paper_sizes::Orientation::Landscape,
             opening: None,
             pending_close: None,
             save_dialog_format: "DWG 2018".to_string(),
diff --git a/src/app/update/file.rs b/src/app/update/file.rs
index a7b4c1428..89fd79a98 100644
--- a/src/app/update/file.rs
+++ b/src/app/update/file.rs
@@ -1026,6 +1026,8 @@ pub(super) fn on_open_file(&mut self) -> Task<Message> {
                     draw_ox as f32,
                     draw_oy as f32,
                     rotation_deg,
+                    1.0,
+                    None,
                     &path,
                     self.active_plot_style.as_ref(),
                 ) {
@@ -1038,6 +1040,93 @@ pub(super) fn on_open_file(&mut self) -> Task<Message> {
                 Task::none()
     }
 
+    /// Export the pending model-space plot window (set by PLOTWINDOW while on
+    /// the Model tab) to PDF, using the chosen paper size/orientation/scale.
+    pub(super) fn on_plot_window_export_path_some(&mut self, path: std::path::PathBuf) -> Task<Message> {
+                use crate::io::paper_sizes::{sheet_mm, window_to_sheet, PlotScale};
+                let i = self.active_tab;
+                if self.tabs[i].scene.current_layout != "Model" {
+                    self.command_line
+                        .push_error("Plot window export is for model space.");
+                    return Task::none();
+                }
+                let Some((x0, y0, x1, y1)) = self.plot_window else {
+                    self.command_line.push_error("No plot window. Pick one first.");
+                    return Task::none();
+                };
+                if (x1 - x0) < 1e-6 || (y1 - y0) < 1e-6 {
+                    self.command_line
+                        .push_error("Plot window is empty. Pick a larger window.");
+                    return Task::none();
+                }
+                let (sheet_w, sheet_h) = sheet_mm(self.plot_format, self.plot_orientation);
+                let win_w = (x1 - x0).max(1e-9);
+                let win_h = (y1 - y0).max(1e-9);
+                let scale_sel = if self.page_setup_scale.trim().eq_ignore_ascii_case("fit") {
+                    PlotScale::Fit
+                } else {
+                    let (num, den) = parse_plot_scale(&self.page_setup_scale);
+                    if num > 0.0 && den > 0.0 {
+                        PlotScale::Ratio(num / den)
+                    } else {
+                        PlotScale::Fit
+                    }
+                };
+                let (scale, ox, oy) =
+                    window_to_sheet((win_w, win_h), (x0, y0), (sheet_w, sheet_h), scale_sel);
+
+                let scene = &self.tabs[i].scene;
+                // Cull to the window so a small-area plot doesn't write the whole
+                // drawing into the PDF; the clip below trims the partial crossers.
+                // aabb is world X/Y [minx, miny, maxx, maxy].
+                let (wx0, wy0, wx1, wy1) = (x0 as f32, y0 as f32, x1 as f32, y1 as f32);
+                let wires: Vec<_> = scene
+                    .entity_wires()
+                    .into_iter()
+                    .filter(|w| {
+                        w.aabb[0] <= wx1 && w.aabb[2] >= wx0 && w.aabb[1] <= wy1 && w.aabb[3] >= wy0
+                    })
+                    .collect();
+                let hatches = scene.paper_canvas_hatches();
+                let wipeouts = scene.paper_canvas_wipeouts();
+
+                // build_pdf maps a wire coordinate to sheet mm as (coord + offset) *
+                // scale (rotation_deg == 0 adds no further CTM translation).
+                // window_to_sheet's (ox, oy) is the sheet-mm target for the window's
+                // min corner, so: scale * (x0 + offset_x) = ox  =>  offset_x = ox/scale - x0.
+                let offset_x = ((ox / scale) - x0) as f32;
+                let offset_y = ((oy / scale) - y0) as f32;
+                // Clip rect in pre-scale space (build_pdf's CTM applies `scale` to it,
+                // same as the wires) so the final sheet-mm rect lands at (ox, oy).
+                let clip = Some(((ox / scale) as f32, (oy / scale) as f32, win_w as f32, win_h as f32));
+
+                let res = crate::io::pdf_export::export_pdf(
+                    &wires,
+                    hatches.as_slice(),
+                    wipeouts.as_slice(),
+                    sheet_w,
+                    sheet_h,
+                    offset_x,
+                    offset_y,
+                    0,
+                    scale as f32,
+                    clip,
+                    &path,
+                    self.active_plot_style.as_ref(),
+                );
+                match res {
+                    Ok(()) => {
+                        self.command_line.push_info(&format!(
+                            "Plotted window to {}",
+                            path.file_name().unwrap_or_default().to_string_lossy()
+                        ));
+                        self.close_active_modal();
+                    }
+                    Err(e) => self.command_line.push_error(&format!("Plot failed: {e}")),
+                }
+                Task::none()
+    }
+
     pub(super) fn on_print_to_printer(&mut self) -> Task<Message> {
                 let i = self.active_tab;
                 let scene = &self.tabs[i].scene;
diff --git a/src/app/update/mod.rs b/src/app/update/mod.rs
index af3eecdaa..ccac95819 100644
--- a/src/app/update/mod.rs
+++ b/src/app/update/mod.rs
@@ -831,6 +831,14 @@ impl OpenCADStudio {
                 self.tabs[i].scene.selection.borrow_mut().context_menu = None;
                 // Any command also dismisses the Isolate action menu.
                 self.isolate_popup_open = false;
+                // "Pick window" (PLOTWINDOW) from Page Setup needs the backdrop
+                // gone so the viewport pick lands; every other command leaves an
+                // open modal (and its staged edits) untouched.
+                if cmd.trim().eq_ignore_ascii_case("PLOTWINDOW")
+                    || cmd.trim().eq_ignore_ascii_case("PW")
+                {
+                    self.close_active_modal();
+                }
                 self.dispatch_command(&cmd)
             }
 
@@ -2987,6 +2995,30 @@ impl OpenCADStudio {
             Message::PlotExportPath(None) => Task::none(),
             Message::PlotExportPath(Some(path)) => self.on_plot_export_path_some(path),
 
+            Message::PlotFormat(f) => {
+                self.plot_format = f;
+                Task::none()
+            }
+            Message::PlotOrientation(o) => {
+                self.plot_orientation = o;
+                Task::none()
+            }
+            Message::PlotWindowExport => {
+                let i = self.active_tab;
+                let stem = self.tabs[i]
+                    .current_path
+                    .as_deref()
+                    .and_then(|p: &std::path::Path| p.file_stem())
+                    .map(|s: &std::ffi::OsStr| s.to_string_lossy().into_owned())
+                    .unwrap_or_else(|| "drawing".into());
+                Task::perform(
+                    crate::io::pdf_export::pick_pdf_path_owned(stem),
+                    Message::PlotWindowExportPath,
+                )
+            }
+            Message::PlotWindowExportPath(None) => Task::none(),
+            Message::PlotWindowExportPath(Some(path)) => self.on_plot_window_export_path_some(path),
+
             // ── Print to system printer ───────────────────────────────────────
             Message::PrintToPrinter => self.on_print_to_printer(),
             Message::PrintResult(Ok(printer)) => {
diff --git a/src/app/view/modal.rs b/src/app/view/modal.rs
index f20d83785..cbbc5d65f 100644
--- a/src/app/view/modal.rs
+++ b/src/app/view/modal.rs
@@ -57,6 +57,8 @@ impl OpenCADStudio {
                     &self.page_setup_offset_y,
                     &self.page_setup_rotation,
                     &self.page_setup_scale,
+                    self.plot_format,
+                    self.plot_orientation,
                 ),
                 520,
                 460,
diff --git a/src/io/mod.rs b/src/io/mod.rs
index bba939ae8..b9471168c 100644
--- a/src/io/mod.rs
+++ b/src/io/mod.rs
@@ -14,6 +14,7 @@ pub mod xref;
 pub mod linetypes;
 pub mod patterns;
 pub mod update_check;
+pub mod paper_sizes;
 
 use crate::scene::DerivedCaches;
 use acadrust::entities::EntityType;
diff --git a/src/io/paper_sizes.rs b/src/io/paper_sizes.rs
new file mode 100644
index 000000000..dcc7e8a82
--- /dev/null
+++ b/src/io/paper_sizes.rs
@@ -0,0 +1,130 @@
+//! ISO paper sizes and sheet orientation for window plotting.
+
+#[derive(Copy, Clone, PartialEq, Eq, Debug)]
+pub enum PaperSize {
+    A4,
+    A3,
+    A2,
+    A1,
+    A0,
+}
+
+impl PaperSize {
+    pub const ALL: [PaperSize; 5] = [
+        PaperSize::A4,
+        PaperSize::A3,
+        PaperSize::A2,
+        PaperSize::A1,
+        PaperSize::A0,
+    ];
+
+    pub fn label(self) -> &'static str {
+        match self {
+            PaperSize::A4 => "A4",
+            PaperSize::A3 => "A3",
+            PaperSize::A2 => "A2",
+            PaperSize::A1 => "A1",
+            PaperSize::A0 => "A0",
+        }
+    }
+
+    /// Portrait dimensions in mm (width, height); width < height.
+    pub fn dimensions_mm(self) -> (f64, f64) {
+        match self {
+            PaperSize::A4 => (210.0, 297.0),
+            PaperSize::A3 => (297.0, 420.0),
+            PaperSize::A2 => (420.0, 594.0),
+            PaperSize::A1 => (594.0, 841.0),
+            PaperSize::A0 => (841.0, 1189.0),
+        }
+    }
+}
+
+#[derive(Copy, Clone, PartialEq, Eq, Debug)]
+pub enum Orientation {
+    Portrait,
+    Landscape,
+}
+
+/// Sheet dimensions in mm for the given size and orientation.
+pub fn sheet_mm(size: PaperSize, o: Orientation) -> (f64, f64) {
+    let (w, h) = size.dimensions_mm();
+    match o {
+        Orientation::Portrait => (w, h),
+        Orientation::Landscape => (h, w),
+    }
+}
+
+#[derive(Copy, Clone, PartialEq, Debug)]
+pub enum PlotScale {
+    /// Scale so the window fills the sheet minus a 5% margin.
+    Fit,
+    /// Exact scale factor (mm per drawing unit).
+    Ratio(f64),
+}
+
+/// Map a world-space window onto a sheet. Returns (scale, offset_x, offset_y):
+/// world (x, y) -> sheet mm ((x - window_min.0) * scale + offset_x, (y - window_min.1) * scale + offset_y).
+/// The scaled window is centered on the sheet.
+pub fn window_to_sheet(
+    window_wh: (f64, f64),
+    window_min: (f64, f64),
+    sheet_mm: (f64, f64),
+    scale: PlotScale,
+) -> (f64, f64, f64) {
+    let (ww, wh) = (window_wh.0.max(1e-9), window_wh.1.max(1e-9));
+    let scale = match scale {
+        PlotScale::Ratio(r) => r.max(1e-9),
+        PlotScale::Fit => {
+            const MARGIN: f64 = 1.05;
+            let sx = (sheet_mm.0 / MARGIN) / ww;
+            let sy = (sheet_mm.1 / MARGIN) / wh;
+            sx.min(sy)
+        }
+    };
+    let scaled_w = ww * scale;
+    let scaled_h = wh * scale;
+    let offset_x = (sheet_mm.0 - scaled_w) / 2.0;
+    let offset_y = (sheet_mm.1 - scaled_h) / 2.0;
+    let _ = window_min; // offset already places the window min at (offset_x, offset_y)
+    (scale, offset_x, offset_y)
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn iso_dimensions_and_orientation() {
+        assert_eq!(PaperSize::A4.dimensions_mm(), (210.0, 297.0));
+        assert_eq!(PaperSize::A0.dimensions_mm(), (841.0, 1189.0));
+        assert_eq!(PaperSize::ALL.len(), 5);
+        assert_eq!(PaperSize::A3.label(), "A3");
+        // Portrait keeps (w,h); landscape swaps.
+        assert_eq!(sheet_mm(PaperSize::A4, Orientation::Portrait), (210.0, 297.0));
+        assert_eq!(sheet_mm(PaperSize::A4, Orientation::Landscape), (297.0, 210.0));
+    }
+
+    #[test]
+    fn fit_centers_and_scales_within_margin() {
+        // 100×100 window onto a 210×297 sheet, Fit. Limiting axis is width:
+        // usable = 210/1.05 = 200; scale = 200/100 = 2.0.
+        let (s, ox, oy) = window_to_sheet((100.0, 100.0), (0.0, 0.0), (210.0, 297.0), PlotScale::Fit);
+        assert!((s - 2.0).abs() < 1e-9, "scale {s}");
+        // Window is 100*2 = 200 wide/tall; centered on 210×297.
+        assert!((ox - (210.0 - 200.0) / 2.0).abs() < 1e-9, "ox {ox}");
+        assert!((oy - (297.0 - 200.0) / 2.0).abs() < 1e-9, "oy {oy}");
+    }
+
+    #[test]
+    fn ratio_applies_exact_scale_and_offsets_window_min() {
+        // Ratio(0.5): scale is exactly 0.5; a window starting at (10,20)
+        // maps its min corner to the offset so (10,20) -> (ox,oy).
+        let (s, ox, oy) = window_to_sheet((100.0, 80.0), (10.0, 20.0), (210.0, 297.0), PlotScale::Ratio(0.5));
+        assert!((s - 0.5).abs() < 1e-9);
+        // Centered: sheet_center - scaled_window_center, then min maps to offset.
+        // scaled window = 50×40; centered box origin = ((210-50)/2,(297-40)/2).
+        assert!((ox - (210.0 - 50.0) / 2.0).abs() < 1e-9, "ox {ox}");
+        assert!((oy - (297.0 - 40.0) / 2.0).abs() < 1e-9, "oy {oy}");
+    }
+}
diff --git a/src/io/pdf_export.rs b/src/io/pdf_export.rs
index 646e4e233..9fc7def9b 100644
--- a/src/io/pdf_export.rs
+++ b/src/io/pdf_export.rs
@@ -35,6 +35,8 @@ pub fn export_pdf(
     _offset_x: f32,
     _offset_y: f32,
     _rotation_deg: i32,
+    _scale: f32,
+    _clip: Option<(f32, f32, f32, f32)>,
     _path: &Path,
     _plot_style: Option<&PlotStyleTable>,
 ) -> Result<(), String> {
@@ -64,6 +66,8 @@ pub fn export_pdf(
     offset_x: f32,
     offset_y: f32,
     rotation_deg: i32,
+    scale: f32,
+    clip: Option<(f32, f32, f32, f32)>,
     path: &Path,
     plot_style: Option<&PlotStyleTable>,
 ) -> Result<(), String> {
@@ -76,6 +80,8 @@ pub fn export_pdf(
         offset_x,
         offset_y,
         rotation_deg,
+        scale,
+        clip,
         plot_style,
     );
     let mut file = std::fs::File::create(path).map_err(|e| e.to_string())?;
@@ -107,6 +113,8 @@ fn build_pdf(
     ox: f32,
     oy: f32,
     rotation_deg: i32,
+    scale: f32,
+    clip: Option<(f32, f32, f32, f32)>,
     plot_style: Option<&PlotStyleTable>,
 ) -> Vec<u8> {
     let mut doc = PdfDocument::new("Open CAD Studio Export");
@@ -133,32 +141,67 @@ fn build_pdf(
         join: LineJoinStyle::Round,
     });
 
-    // Apply rotation transform if needed.
+    // Apply rotation/scale/clip transform if needed.
     // PDF uses mm-based coordinate system with origin at bottom-left.
-    // We save state, apply a CTM, then restore it after drawing.
-    let needs_rotation = rotation_deg != 0;
-    if needs_rotation {
+    // We save state, apply a CTM (+ optional clip path), then restore after drawing.
+    let needs_state = rotation_deg != 0 || (scale - 1.0).abs() > 1e-6 || clip.is_some();
+    if needs_state {
         let (cos_a, sin_a, tx, ty) = match rotation_deg {
             90 => (0.0_f64, 1.0_f64, 0.0, paper_h as f64),
             180 => (-1.0_f64, 0.0_f64, paper_w as f64, paper_h as f64),
             270 => (0.0_f64, -1.0_f64, paper_w as f64, 0.0),
             _ => (1.0_f64, 0.0_f64, 0.0, 0.0),
         };
-        // PDF CTM: [a b c d e f] = [cos sin -sin cos tx ty]
+        let s = scale as f64;
+        // PDF CTM: [a b c d e f] = [cos*s sin*s -sin*s cos*s tx ty]
         ops.push(Op::SaveGraphicsState);
         // Convert mm translation to points (1 mm = 2.834645 pt).
         let tx_pt = (tx * 2.834645) as f32;
         let ty_pt = (ty * 2.834645) as f32;
         ops.push(Op::SetTransformationMatrix {
             matrix: printpdf::CurTransMat::Raw([
-                cos_a as f32,
-                sin_a as f32,
-                -(sin_a as f32),
-                cos_a as f32,
+                (cos_a * s) as f32,
+                (sin_a * s) as f32,
+                (-(sin_a) * s) as f32,
+                (cos_a * s) as f32,
                 tx_pt,
                 ty_pt,
             ]),
         });
+        // Clip rectangle (mm), applied in the pre-scale coordinate space so it
+        // matches the wires drawn under the same CTM.
+        if let Some((cx, cy, cw, ch)) = clip {
+            const MM_TO_PT: f32 = 2.834645;
+            ops.push(Op::DrawPolygon {
+                polygon: Polygon {
+                    rings: vec![PolygonRing {
+                        points: vec![
+                            LinePoint {
+                                p: Point { x: Pt(cx * MM_TO_PT), y: Pt(cy * MM_TO_PT) },
+                                bezier: false,
+                            },
+                            LinePoint {
+                                p: Point { x: Pt((cx + cw) * MM_TO_PT), y: Pt(cy * MM_TO_PT) },
+                                bezier: false,
+                            },
+                            LinePoint {
+                                p: Point {
+                                    x: Pt((cx + cw) * MM_TO_PT),
+                                    y: Pt((cy + ch) * MM_TO_PT),
+                                },
+                                bezier: false,
+                            },
+                            LinePoint {
+                                p: Point { x: Pt(cx * MM_TO_PT), y: Pt((cy + ch) * MM_TO_PT) },
+                                bezier: false,
+                            },
+                        ],
+                    }],
+                    mode: PaintMode::Clip,
+                    winding_order: WindingOrder::NonZero,
+                },
+            });
+        }
     }
 
     // mm to PDF points (1 mm = 2.834645 pt).
@@ -203,7 +246,7 @@ fn build_pdf(
                 }
                 lw_override = ctb
                     .resolve_lineweight(wire.aci)
-                    .map(|mm| (mm * MM_TO_PT).max(0.1));
+                    .map(|mm| (mm * MM_TO_PT).max(0.1) / scale.max(1e-6));
             }
         }
         // Near-white and near-yellow (viewport active border) → dark grey for print
@@ -239,8 +282,13 @@ fn build_pdf(
             last_color = Some([r, g, b]);
         }
 
-        // Line weight: CTB override (in pt) or screen px → points.
-        let lw_pt = lw_override.unwrap_or_else(|| (wire.line_weight_px * LW_PX_TO_PT).max(0.1));
+        // Line weight: CTB override (in pt) or screen px → points. Divided by
+        // `scale` in both branches so pen widths stay absolute under the
+        // scaled CTM above (AutoCAD keeps lineweights independent of plot
+        // scale) — without this a Fit plot of a large window renders
+        // near-invisible hairlines.
+        let lw_pt = lw_override
+            .unwrap_or_else(|| (wire.line_weight_px * LW_PX_TO_PT).max(0.1) / scale.max(1e-6));
         if last_lw.map(|l| (l - lw_pt).abs() > 0.01).unwrap_or(true) {
             ops.push(Op::SetOutlineThickness { pt: Pt(lw_pt) });
             last_lw = Some(lw_pt);
@@ -275,7 +323,7 @@ fn build_pdf(
         flush_line(&mut ops, &segment);
     }
 
-    if needs_rotation {
+    if needs_state {
         ops.push(Op::RestoreGraphicsState);
     }
 
@@ -440,3 +488,34 @@ fn emit_hatch(ops: &mut Vec<Op>, hatch: &HatchModel, ox: f32, oy: f32) {
         },
     });
 }
+
+#[cfg(all(test, not(target_arch = "wasm32")))]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn clip_and_scale_emit_pdf_bytes() {
+        let w = WireModel::solid(
+            "test".into(),
+            vec![[0.0, 0.0, 0.0], [50.0, 50.0, 0.0]],
+            WireModel::WHITE,
+            false,
+        );
+        let bytes = build_pdf(
+            &[w],
+            &[],
+            &[],
+            210.0,
+            297.0,
+            0.0,
+            0.0,
+            0,
+            2.0,
+            Some((10.0, 10.0, 100.0, 100.0)),
+            None,
+        );
+        // A valid PDF is produced (starts with the PDF header) and is non-trivial.
+        assert!(bytes.starts_with(b"%PDF"), "not a PDF");
+        assert!(bytes.len() > 200, "suspiciously small: {}", bytes.len());
+    }
+}
diff --git a/src/io/print_to_printer.rs b/src/io/print_to_printer.rs
index 2e0f95242..c175edd05 100644
--- a/src/io/print_to_printer.rs
+++ b/src/io/print_to_printer.rs
@@ -57,6 +57,8 @@ pub async fn print_wires(
         offset_x,
         offset_y,
         rotation_deg,
+        1.0,
+        None,
         &tmp_path,
         plot_style.as_ref(),
     )?;
diff --git a/src/modules/view/mod.rs b/src/modules/view/mod.rs
index 234924a02..e3fdb5beb 100644
--- a/src/modules/view/mod.rs
+++ b/src/modules/view/mod.rs
@@ -33,7 +33,7 @@ mod zoom_in;
 mod zoom_out;
 pub mod zoom_window;
 
-use crate::modules::{CadModule, RibbonGroup, RibbonItem};
+use crate::modules::{CadModule, IconKind, ModuleEvent, RibbonGroup, RibbonItem, ToolDef};
 
 pub struct ViewModule;
 
@@ -137,6 +137,19 @@ impl CadModule for ViewModule {
                         RibbonItem::Tool(cascade::tool()),
                     ],
                 },
+                // ── Plot ──────────────────────────────────────────────────────────
+                // Model space has no paper-space side toolbar, so Page Setup
+                // (format/orientation/pick window for PLOTWINDOW) needs an
+                // entry here too.
+                RibbonGroup {
+                    title: "Plot",
+                    tools: vec![RibbonItem::Tool(ToolDef {
+                        id: "PAGESETUP",
+                        label: "Page Setup",
+                        icon: IconKind::Svg(include_bytes!("../../../assets/icons/pagesetup.svg")),
+                        event: ModuleEvent::Command("PAGESETUP".to_string()),
+                    })],
+                },
             ]
         })
     }
diff --git a/src/modules/view/plot_window.rs b/src/modules/view/plot_window.rs
index 5445ebc77..5582329cf 100644
--- a/src/modules/view/plot_window.rs
+++ b/src/modules/view/plot_window.rs
@@ -1,7 +1,7 @@
 // PLOTWINDOW command — pick two corners to define the plot window area.
 //
-// Works only in paper space layouts. After picking P1 and P2, writes the
-// window to the layout's PlotSettings (PlotType::Window).
+// In paper space it writes the layout's PlotSettings (PlotType::Window); in
+// model space the host stores the window for the plot dialog.
 
 use crate::command::{CadCommand, CmdResult};
 use crate::scene::model::wire_model::WireModel;
diff --git a/src/ui/window/page_setup.rs b/src/ui/window/page_setup.rs
index 1ebc4b69b..f4f83950c 100644
--- a/src/ui/window/page_setup.rs
+++ b/src/ui/window/page_setup.rs
@@ -1,6 +1,7 @@
 //! Page Setup window — fills the entire OS window.
 
 use crate::app::Message;
+use crate::io::paper_sizes::{Orientation, PaperSize};
 use iced::widget::{button, column, container, row, scrollable, text, text_input, Space};
 use iced::{Background, Border, Color, Element, Fill, Theme};
 
@@ -154,6 +155,8 @@ pub fn view_window<'a>(
     offset_y: &'a str,
     rotation: &'a str,
     scale: &'a str,
+    plot_format: PaperSize,
+    plot_orientation: Orientation,
 ) -> Element<'a, Message> {
     // ── Toolbar ───────────────────────────────────────────────────────────
     let toolbar = container(
@@ -286,6 +289,46 @@ pub fn view_window<'a>(
     ]
     .spacing(4);
 
+    // ── Model-space window plot ───────────────────────────────────────────
+    // Sheet size/orientation for PLOTWINDOW's clipped export; the scale
+    // pills above (`scale_row1`/`scale_row2`) double as its plot scale.
+    let format_row = {
+        let mut r = row![lbl("Format")].spacing(4).align_y(iced::Center);
+        for size in PaperSize::ALL {
+            r = r.push(
+                button(text(size.label()).size(10))
+                    .on_press(Message::PlotFormat(size))
+                    .style(pill(plot_format == size))
+                    .padding([3, 8]),
+            );
+        }
+        r
+    };
+    let orient_row = row![
+        lbl("Orientation"),
+        button(text("Portrait").size(10))
+            .on_press(Message::PlotOrientation(Orientation::Portrait))
+            .style(pill(plot_orientation == Orientation::Portrait))
+            .padding([3, 8]),
+        button(text("Landscape").size(10))
+            .on_press(Message::PlotOrientation(Orientation::Landscape))
+            .style(pill(plot_orientation == Orientation::Landscape))
+            .padding([3, 8]),
+    ]
+    .spacing(4)
+    .align_y(iced::Center);
+    let window_row = row![
+        button(text("Pick window").size(10))
+            .on_press(Message::Command("PLOTWINDOW".into()))
+            .style(btn(false))
+            .padding([4, 10]),
+        button(text("Plot window → PDF").size(10))
+            .on_press(Message::PlotWindowExport)
+            .style(btn(true))
+            .padding([4, 10]),
+    ]
+    .spacing(6);
+
     // ── Main scrollable form ──────────────────────────────────────────────
     let form = column![
         section_label("Paper Size"),
@@ -366,6 +409,11 @@ pub fn view_window<'a>(
         section_label("Plot Scale"),
         scale_row1,
         scale_row2,
+        hdivider(),
+        section_label("Model-Space Window Plot"),
+        format_row,
+        orient_row,
+        window_row,
     ]
     .spacing(10)
     .padding(16)