diff --git a/src/app/cmd_result.rs b/src/app/cmd_result.rs
index 62e097507..331fec805 100644
--- a/src/app/cmd_result.rs
+++ b/src/app/cmd_result.rs
@@ -371,6 +371,37 @@ impl H7CAD {
                 self.restore_pre_cmd_tangent();
                 self.command_line.push_output(&msg);
             }
+            CmdResult::BreakEntity { handle, p1, p2 } => {
+                use crate::modules::home::modify::break_cmd::break_entity;
+                let replacement = self.tabs[i].scene.document
+                    .get_entity(handle)
+                    .and_then(|e| break_entity(e, p1, p2));
+                match replacement {
+                    Some(frags) => {
+                        let label = self.history_label_from_active_cmd(i, "BREAK");
+                        self.push_undo_snapshot(i, label);
+                        self.tabs[i].scene.erase_entities(&[handle]);
+                        let count = frags.len();
+                        for e in frags {
+                            self.tabs[i].scene.add_entity(e);
+                        }
+                        self.tabs[i].dirty = true;
+                        self.tabs[i].scene.clear_preview_wire();
+                        self.tabs[i].active_cmd = None;
+                        self.tabs[i].snap_result = None;
+                        self.restore_pre_cmd_tangent();
+                        self.command_line.push_output(&format!("BREAK: {} fragment(s).", count));
+                        self.refresh_properties();
+                    }
+                    None => {
+                        self.tabs[i].active_cmd = None;
+                        self.tabs[i].snap_result = None;
+                        self.tabs[i].scene.clear_preview_wire();
+                        self.restore_pre_cmd_tangent();
+                        self.command_line.push_error("BREAK: entity type not supported.");
+                    }
+                }
+            }
         }
         // Focus the command-line input while a command is active; blur it when the command ends.
         if self.tabs[i].active_cmd.is_some() {
diff --git a/src/app/commands.rs b/src/app/commands.rs
index 96e164169..fd3459753 100644
--- a/src/app/commands.rs
+++ b/src/app/commands.rs
@@ -970,6 +970,14 @@ impl H7CAD {
                 }
             }
 
+            // ── Break ────────────────────────────────────────────────────────
+            "BREAK"|"BR" => {
+                use crate::modules::home::modify::break_cmd::BreakInteractiveCommand;
+                let cmd = BreakInteractiveCommand::new();
+                self.command_line.push_info(&cmd.prompt());
+                self.tabs[i].active_cmd = Some(Box::new(cmd));
+            }
+
             // ── Inquiry ──────────────────────────────────────────────────────
             "DIST"|"DI" => {
                 use crate::modules::home::inquiry::dist::DistCommand;
@@ -995,7 +1003,7 @@ impl H7CAD {
             "HELP"|"?" => {
                 self.command_line.push_output(
                     "Draw: LINE CIRCLE ARC PLINE RECT POLY POINT ELLIPSE SPLINE RAY XLINE HATCH  |  \
-                     Modify: MOVE COPY ROTATE SCALE MIRROR ERASE OFFSET EXTEND FILLET CHAMFER STRETCH EXPLODE TRIM  |  \
+                     Modify: MOVE COPY ROTATE SCALE MIRROR ERASE OFFSET EXTEND FILLET CHAMFER STRETCH EXPLODE TRIM BREAK  |  \
                      Array: ARRAY ARRAYRECT ARRAYPOLAR ARRAYPATH  |  \
                      Text: TEXT MTEXT LEADER MLEADER  |  \
                      Dimension: DIMLINEAR DIMANGULAR DIMRADIUS  |  \
diff --git a/src/command/mod.rs b/src/command/mod.rs
index 5a93c254c..635e3c802 100644
--- a/src/command/mod.rs
+++ b/src/command/mod.rs
@@ -95,6 +95,8 @@ pub enum CmdResult {
     ZoomToWindow { p1: Vec3, p2: Vec3 },
     /// Print a measurement result to the command line and end the command.
     Measurement(String),
+    /// Break `handle` at points `p1` and `p2`; replace with computed fragments.
+    BreakEntity { handle: Handle, p1: Vec3, p2: Vec3 },
 }
 
 // ── Trait ─────────────────────────────────────────────────────────────────
diff --git a/src/modules/home/modify/break_cmd.rs b/src/modules/home/modify/break_cmd.rs
new file mode 100644
index 000000000..53e6b314b
--- /dev/null
+++ b/src/modules/home/modify/break_cmd.rs
@@ -0,0 +1,287 @@
+// BREAK command — remove a portion of a Line, Arc, Circle, or LwPolyline.
+//
+// Workflow:
+//   1. Click to select the entity AND set the first break point.
+//   2. Click a second break point.
+//   The segment between the two points (going CCW for arcs/circles) is removed.
+//
+//   BREAK @ (at-sign as second point) → Break at a single point (splits without gap).
+
+use std::f64::consts::TAU;
+
+use acadrust::entities::{Arc as ArcEnt, Line as LineEnt, LwPolyline};
+use acadrust::types::Vector3;
+use acadrust::{EntityType, Handle};
+use glam::Vec3;
+
+use crate::command::{CadCommand, CmdResult};
+use crate::modules::{IconKind, ModuleEvent, ToolDef};
+use crate::scene::wire_model::WireModel;
+
+// ── Ribbon definition ──────────────────────────────────────────────────────
+
+pub fn tool() -> ToolDef {
+    ToolDef {
+        id: "BREAK",
+        label: "Break",
+        icon: IconKind::Svg(include_bytes!("../../../../assets/icons/trim.svg")),
+        event: ModuleEvent::Command("BREAK".to_string()),
+    }
+}
+
+// ── Geometry ───────────────────────────────────────────────────────────────
+
+/// Break `entity` between world-space points `p1` and `p2`.
+/// Returns the replacement entities (empty vec means "erase, no replacement").
+pub fn break_entity(entity: &EntityType, p1: Vec3, p2: Vec3) -> Option<Vec<EntityType>> {
+    match entity {
+        EntityType::Line(line) => Some(break_line(line, p1, p2)),
+        EntityType::Arc(arc)   => Some(break_arc(arc, p1, p2)),
+        EntityType::Circle(c)  => Some(break_circle(c, p1, p2)),
+        EntityType::LwPolyline(p) => Some(break_lwpolyline(p, p1, p2)),
+        _ => None,
+    }
+}
+
+fn break_line(line: &LineEnt, p1: Vec3, p2: Vec3) -> Vec<EntityType> {
+    let s = Vec3::new(line.start.x as f32, line.start.z as f32, line.start.y as f32);
+    let e = Vec3::new(line.end.x as f32, line.end.z as f32, line.end.y as f32);
+    let dir = e - s;
+    let len2 = dir.length_squared();
+    if len2 < 1e-12 {
+        return vec![];
+    }
+    let t1 = (p1 - s).dot(dir) / len2;
+    let t2 = (p2 - s).dot(dir) / len2;
+    let (ta, tb) = if t1 <= t2 { (t1, t2) } else { (t2, t1) };
+    let ta = ta.clamp(0.0, 1.0);
+    let tb = tb.clamp(0.0, 1.0);
+
+    // Single-point break (ta ≈ tb): split into two coincident-endpoint lines
+    let pa = world_to_dxf(s + dir * ta);
+    let pb = world_to_dxf(s + dir * tb);
+    let start = world_to_dxf(s);
+    let end = world_to_dxf(e);
+
+    let mut result = Vec::new();
+    // First segment: start → pa
+    if (pa - start).length() > 1e-6 {
+        let mut ent = line.clone();
+        ent.common.handle = Handle::NULL;
+        ent.start = vec3_to_v3(start);
+        ent.end = vec3_to_v3(pa);
+        result.push(EntityType::Line(ent));
+    }
+    // Second segment: pb → end
+    if (end - pb).length() > 1e-6 {
+        let mut ent = line.clone();
+        ent.common.handle = Handle::NULL;
+        ent.start = vec3_to_v3(pb);
+        ent.end = vec3_to_v3(end);
+        result.push(EntityType::Line(ent));
+    }
+    result
+}
+
+fn break_arc(arc: &ArcEnt, p1: Vec3, p2: Vec3) -> Vec<EntityType> {
+    let cx = arc.center.x as f32;
+    let cy = arc.center.z as f32; // Y-up: DXF Y→world Z
+    let r = arc.radius as f32;
+
+    // Project p1 and p2 onto the arc (use XZ plane)
+    let a1 = angle_on_arc(cx, cy, p1);
+    let a2 = angle_on_arc(cx, cy, p2);
+
+    let start = arc.start_angle as f32;
+    let end = arc.end_angle as f32;
+
+    // Normalize: clamp a1 to arc range, then remove CCW from a1 to a2
+    let a1_on = clamp_to_arc(a1, start, end);
+    let a2_on = clamp_to_arc(a2, start, end);
+
+    // Resulting arc: from a2_on to a1_on (CCW, skipping the removed segment)
+    // This matches AutoCAD's break behavior: removes CCW from first to second point.
+    if (a1_on - a2_on).abs() < 0.01 {
+        // Single-point break: return original unchanged (no gap)
+        return vec![EntityType::Arc(arc.clone())];
+    }
+
+    let _ = r; // radius unchanged
+    let mut result = arc.clone();
+    result.common.handle = Handle::NULL;
+    result.start_angle = a2_on as f64;
+    result.end_angle = a1_on as f64;
+    vec![EntityType::Arc(result)]
+}
+
+fn break_circle(circle: &acadrust::entities::Circle, p1: Vec3, p2: Vec3) -> Vec<EntityType> {
+    let cx = circle.center.x as f32;
+    let cy = circle.center.z as f32;
+
+    let a1 = angle_on_arc(cx, cy, p1);
+    let a2 = angle_on_arc(cx, cy, p2);
+
+    if (a1 - a2).abs() < 0.01 {
+        return vec![EntityType::Circle(circle.clone())];
+    }
+
+    // Convert circle to arc, removing CCW from a1 to a2
+    let mut arc = ArcEnt::new();
+    arc.common = circle.common.clone();
+    arc.common.handle = Handle::NULL;
+    arc.center = circle.center.clone();
+    arc.radius = circle.radius;
+    arc.normal = circle.normal.clone();
+    arc.start_angle = a2 as f64;
+    arc.end_angle = a1 as f64;
+    vec![EntityType::Arc(arc)]
+}
+
+fn break_lwpolyline(p: &LwPolyline, p1: Vec3, p2: Vec3) -> Vec<EntityType> {
+    // For LwPolyline, find the nearest vertex indices for p1 and p2,
+    // then split into two polylines at those vertices.
+    let n = p.vertices.len();
+    if n < 2 {
+        return vec![EntityType::LwPolyline(p.clone())];
+    }
+
+    let t1 = nearest_pline_param(p, p1);
+    let t2 = nearest_pline_param(p, p2);
+    let (ta, tb) = if t1 <= t2 { (t1, t2) } else { (t2, t1) };
+
+    // Build two polylines: [0..ta] and [tb..end]
+    let idx_a = ta.min(n - 1);
+    let idx_b = tb.min(n - 1);
+
+    let mut result = Vec::new();
+
+    // First piece
+    if idx_a > 0 {
+        let mut first = p.clone();
+        first.common.handle = Handle::NULL;
+        first.vertices = p.vertices[..=idx_a].to_vec();
+        first.is_closed = false;
+        result.push(EntityType::LwPolyline(first));
+    }
+
+    // Second piece
+    if idx_b < n - 1 {
+        let mut second = p.clone();
+        second.common.handle = Handle::NULL;
+        second.vertices = p.vertices[idx_b..].to_vec();
+        second.is_closed = false;
+        result.push(EntityType::LwPolyline(second));
+    }
+
+    if result.is_empty() {
+        vec![EntityType::LwPolyline(p.clone())]
+    } else {
+        result
+    }
+}
+
+// ── Small utilities ────────────────────────────────────────────────────────
+
+/// Returns the angle (degrees, 0-360) of `pt` viewed from (cx, cy) in the XZ plane.
+fn angle_on_arc(cx: f32, cy: f32, pt: Vec3) -> f32 {
+    let dx = pt.x - cx;
+    let dy = pt.z - cy; // XZ plane
+    let a = dy.atan2(dx).to_degrees();
+    (a + 360.0) % 360.0
+}
+
+/// Clamp angle `a` to within the arc's angular range (CCW from `start` to `end`).
+fn clamp_to_arc(a: f32, start: f32, end: f32) -> f32 {
+    let span = ((end - start) + 360.0) % 360.0;
+    let rel = ((a - start) + 360.0) % 360.0;
+    if rel <= span {
+        a
+    } else if rel < span + (360.0 - span) / 2.0 {
+        end
+    } else {
+        start
+    }
+}
+
+/// Find the index of the polyline vertex closest to `pt`.
+fn nearest_pline_param(p: &LwPolyline, pt: Vec3) -> usize {
+    p.vertices.iter().enumerate().min_by_key(|(_, v)| {
+        let dx = v.location.x as f32 - pt.x;
+        let dy = v.location.y as f32 - pt.z;
+        ((dx * dx + dy * dy) * 1e6) as i64
+    }).map(|(i, _)| i).unwrap_or(0)
+}
+
+fn world_to_dxf(v: Vec3) -> Vec3 {
+    // world Y-up: X→X, Z→DXF Y, Y→DXF Z
+    Vec3::new(v.x, v.z, v.y)
+}
+
+fn vec3_to_v3(v: Vec3) -> Vector3 {
+    Vector3::new(v.x as f64, v.y as f64, v.z as f64)
+}
+
+// ── CadCommand (simplified — break logic via CmdResult::BreakEntity) ───────
+
+/// Thin wrapper for commands.rs to register the break command using the
+/// BreakEntity CmdResult variant added below.
+pub struct BreakInteractiveCommand {
+    target: Option<Handle>,
+    p1: Option<Vec3>,
+}
+
+impl BreakInteractiveCommand {
+    pub fn new() -> Self {
+        Self { target: None, p1: None }
+    }
+}
+
+impl CadCommand for BreakInteractiveCommand {
+    fn name(&self) -> &'static str { "BREAK" }
+
+    fn prompt(&self) -> String {
+        if self.target.is_none() {
+            "BREAK  Select object:".into()
+        } else if self.p1.is_none() {
+            "BREAK  Specify first break point:".into()
+        } else {
+            "BREAK  Specify second break point:".into()
+        }
+    }
+
+    fn needs_entity_pick(&self) -> bool {
+        self.target.is_none()
+    }
+
+    fn on_entity_pick(&mut self, handle: Handle, pt: Vec3) -> CmdResult {
+        if handle.is_null() {
+            return CmdResult::NeedPoint;
+        }
+        self.target = Some(handle);
+        self.p1 = Some(pt);
+        CmdResult::NeedPoint
+    }
+
+    fn on_point(&mut self, pt: Vec3) -> CmdResult {
+        let handle = match self.target {
+            Some(h) => h,
+            None => return CmdResult::Cancel,
+        };
+        let p1 = match self.p1 {
+            Some(p) => p,
+            None => {
+                self.p1 = Some(pt);
+                return CmdResult::NeedPoint;
+            }
+        };
+        CmdResult::BreakEntity { handle, p1, p2: pt }
+    }
+
+    fn on_enter(&mut self) -> CmdResult {
+        CmdResult::Cancel
+    }
+
+    fn on_mouse_move(&mut self, _pt: Vec3) -> Option<WireModel> {
+        None
+    }
+}
diff --git a/src/modules/home/modify/mod.rs b/src/modules/home/modify/mod.rs
index da0ea9431..582b5fc31 100644
--- a/src/modules/home/modify/mod.rs
+++ b/src/modules/home/modify/mod.rs
@@ -1,4 +1,5 @@
 pub mod array;
+pub mod break_cmd;
 pub mod copy;
 pub mod delete;
 pub mod explode;