Merge remote-tracking branch 'origin/main' into codex/attdef-parity

# Conflicts:
#	Cargo.lock
#	src/modules/draw/draw/attdef.rs

src/modules/annotate/aligned_dim.rs

@@ -366,7 +366,9 @@ impl CadCommand for AlignedDimensionCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 
     fn dyn_spec(&self) -> Option<crate::command::DynSpec> {
@@ -482,7 +484,9 @@ fn preview_aligned(p1: DVec3, p2: DVec3, dim_pt: DVec3) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 

src/modules/annotate/angular_dim.rs

@@ -1275,7 +1275,9 @@ fn preview_wire(points: Vec<DVec3>) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 inventory::submit!(crate::command::CommandRegistration { names: &["DIMANGULAR"] });

src/modules/annotate/data_link.rs

@@ -134,7 +134,9 @@ impl DataLinkPlaceCommand {
             plinegen: true,
             fill_tris: Vec::new(),
             fill_tris_low: Vec::new(),
-        }
+        
+            ..Default::default()
+}
     }
 }
 
@@ -160,7 +162,7 @@ impl CadCommand for DataLinkPlaceCommand {
         self.table.insertion_point = codec::types::Vector3::new(point.x, point.y, point.z);
         CmdResult::CommitAndExit(
             self.plane
-                .place_entity(EntityType::Table(self.table.clone())),
+                .place_entity(EntityType::Table(Box::new(self.table.clone()))),
         )
     }
 

src/modules/annotate/diameter_dim.rs

@@ -364,7 +364,9 @@ fn preview_line(far_chord: Vec3, chord: Vec3, text: Vec3) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 inventory::submit!(crate::command::CommandRegistration { names: &["DIMDIAMETER"] });

src/modules/annotate/dim_baseline.rs

@@ -755,7 +755,9 @@ fn preview_for_dimension(dimension: &Dimension) -> WireModel {
         plinegen: true,
         fill_tris: Vec::new(),
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 fn linear_preview(

src/modules/annotate/jogged_radius_dim.rs

@@ -506,7 +506,9 @@ fn preview_wire(points: Vec<Vec3>) -> WireModel {
         plinegen: true,
         fill_tris: Vec::new(),
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 inventory::submit!(crate::command::CommandRegistration {

src/modules/annotate/leader_cmd.rs

@@ -470,7 +470,9 @@ fn preview_wire(pts: &[Vec3], arrow_size: f32) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+            ..Default::default()
+}
 }
 
 pub fn arrowhead_wings(tip: Vec3, next: Vec3, size: f32) -> [Vec3; 2] {

src/modules/annotate/linear_dim.rs

@@ -590,7 +590,9 @@ fn preview_wire(points: Vec<DVec3>) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+            ..Default::default()
+}
 }
 
 /// Project the two extension origins onto the dimension line, which passes

src/modules/annotate/mleader_cmd.rs

@@ -269,7 +269,7 @@ impl MLeaderCommand {
             ml.text_style_handle = style_handle;
             ml.context.text_style_handle = style_handle;
         }
-        let entity = self.plane.place_entity(EntityType::MultiLeader(ml));
+        let entity = self.plane.place_entity(EntityType::MultiLeader(Box::new(ml)));
         if self.content_type == LeaderContentType::MText && self.text.is_empty() {
             CmdResult::CommitAndEditText(entity)
         } else {
@@ -799,7 +799,9 @@ fn preview_wire(pts: &[Vec3], arrow_size: f32) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+            ..Default::default()
+}
 }
 
 fn arrowhead_wings(tip: Vec3, next: Vec3, size: f32) -> [Vec3; 2] {

src/modules/annotate/mleader_edit.rs

@@ -523,7 +523,9 @@ fn preview_wire(pts: &[Vec3]) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+            ..Default::default()
+}
 }
 
 fn point_segment_distance_xy(point: Vector3, start: Vector3, end: Vector3) -> f64 {

src/modules/annotate/ordinate_dim.rs

@@ -315,7 +315,9 @@ fn preview_wire(points: Vec<Vec3>) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 

src/modules/annotate/radius_dim.rs

@@ -376,7 +376,9 @@ fn preview_wire(points: Vec<Vec3>) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 inventory::submit!(crate::command::CommandRegistration { names: &["DIMRADIUS"] });

src/modules/annotate/table_cmd.rs

@@ -271,7 +271,7 @@ impl TableCommand {
                 row.style = Some(styles[row_index.min(2)].clone());
             }
         }
-        self.plane.place_entity(EntityType::Table(table))
+        self.plane.place_entity(EntityType::Table(Box::new(table)))
     }
 
     fn preview_grid(
@@ -341,7 +341,9 @@ impl TableCommand {
             plinegen: true,
             fill_tris: Vec::new(),
             fill_tris_low: Vec::new(),
-        }
+        
+            ..Default::default()
+}
     }
 }
 
@@ -795,7 +797,7 @@ impl CadCommand for TableCellEditCommand {
         cell.set_text(&formatted);
         self.table.block_record_handle = None;
         Some(CmdResult::ReplaceMany(
-            vec![(self.handle, vec![EntityType::Table(self.table.clone())])],
+            vec![(self.handle, vec![EntityType::Table(Box::new(self.table.clone()))])],
             Vec::new(),
         ))
     }

src/modules/annotate/tolerance_cmd.rs

@@ -114,7 +114,9 @@ impl CadCommand for ToleranceCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 }
 

src/modules/draw/draw/helix.rs

@@ -139,7 +139,7 @@ impl HelixCommand {
         helix.turn_height = if curve.turns == 0.0 { 0.0 } else { height / curve.turns };
         helix.handedness = self.counter_clockwise;
         helix.constraint = self.constraint;
-        Some(EntityType::Helix(helix))
+        Some(EntityType::Helix(Box::new(helix)))
     }
 
     fn commit(&mut self, height: f64, axis: DVec3) -> CmdResult {

src/modules/draw/draw/mline.rs

@@ -213,7 +213,9 @@ impl MlineCommand {
             plinegen: true,
             fill_tris,
             fill_tris_low,
-        })
+        
+            ..Default::default()
+})
     }
 }
 

src/modules/draw/draw/raster_image.rs

@@ -202,7 +202,9 @@ impl CadCommand for ImageCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 }
 

src/modules/draw/draw/ray.rs

@@ -119,7 +119,9 @@ impl CadCommand for RayCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 }
 
@@ -408,7 +410,9 @@ impl CadCommand for XLineCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 }
 

src/modules/draw/inquiry/area.rs

@@ -401,7 +401,9 @@ impl CadCommand for AreaCommand {
             plinegen: true,
             fill_tris: Vec::new(),
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 
     fn area_preview_regions(&self) -> Option<Vec<AreaPreviewRegion>> {

src/modules/draw/inquiry/dist.rs

@@ -124,7 +124,9 @@ impl CadCommand for DistCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 }
 

src/modules/draw/inquiry/measuregeom.rs

@@ -103,7 +103,9 @@ impl MeasureGeomCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        }
+        
+            ..Default::default()
+}
     }
 
     /// Extract (radius) from a Circle or Arc; `None` for anything else.

src/modules/draw/modify/reverse.rs

@@ -75,7 +75,8 @@ impl ReverseCommand {
             }
             EntityType::Spline(sp) => Some(EntityType::Spline(reverse_spline(sp))),
             EntityType::Helix(helix) => {
-                crate::entities::helix::reversed(helix).map(EntityType::Helix)
+                crate::entities::helix::reversed(helix)
+                    .map(|helix| EntityType::Helix(Box::new(helix)))
             }
             _ => None,
         }

src/modules/draw/modify/trim.rs

@@ -4870,7 +4870,9 @@ fn preview_wire(points: Vec<[f32; 3]>, color: [f32; 4], name: &str) -> WireModel
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }
 
 /// Insert the exact boundary crossings between consecutive samples so a

src/modules/insert/pc_crop.rs

@@ -117,7 +117,10 @@ impl PointCloudCropCommand {
         if let ExtendedEntityData::PointCloudEx(data) = &mut cloud.data {
             change(data);
         }
-        CmdResult::UpdateEntityAndFinish { handle: self.handle, entity: EntityType::Extended(cloud) }
+        CmdResult::UpdateEntityAndFinish {
+            handle: self.handle,
+            entity: EntityType::Extended(Box::new(cloud)),
+        }
     }
 
     fn axes(data: &PointCloudExData) -> glam::DMat3 {
@@ -296,7 +299,7 @@ impl CadCommand for PointCloudCropCommand {
         match self.picked.take() {
             Some(EntityType::Extended(cloud)) if matches!(cloud.data, ExtendedEntityData::PointCloudEx(_)) => {
                 self.handle = handle;
-                self.cloud = Some(cloud);
+                self.cloud = Some(*cloud);
                 if self.uncrop {
                     return self.finish(|data| data.croppings.clear());
                 }

src/modules/insert/solid3d_cmds.rs

@@ -2793,7 +2793,7 @@ pub fn empty_extruded_surface(direction: DVec3, taper_angle: f64) -> EntityType
         options.is_solid = false;
         *sweep_vector = Vector3::new(direction.x, direction.y, direction.z);
     }
-    EntityType::Surface(surface)
+    EntityType::Surface(Box::new(surface))
 }
 
 pub fn empty_revolved_surface(
@@ -2832,7 +2832,7 @@ pub fn empty_revolved_surface(
         *stored_start = start_angle;
         *solid = false;
     }
-    EntityType::Surface(surface)
+    EntityType::Surface(Box::new(surface))
 }
 
 // ── Autocomplete registry ─────────────────────────────────
@@ -2909,7 +2909,7 @@ mod thicken_command_tests {
         let handle = Handle::new(42);
         let mut command = ThickenCommand::new(vec![
             (Handle::new(1), EntityType::Line(codec::entities::Line::default())),
-            (handle, EntityType::Surface(codec::entities::Surface::new(codec::entities::SurfaceKind::Plane))),
+            (handle, EntityType::Surface(Box::new(codec::entities::Surface::new(codec::entities::SurfaceKind::Plane)))),
         ]);
         assert!(!command.is_selection_gathering());
         assert_eq!(command.handles, vec![handle]);

src/modules/model/primitive_cmd.rs

@@ -3710,5 +3710,7 @@ fn wire(name: &str, points: Vec<[f32; 3]>) -> WireModel {
         plinegen: true,
         fill_tris: vec![],
         fill_tris_low: Vec::new(),
-    }
+    
+        ..Default::default()
+}
 }

src/modules/model/sectionplane_cmd.rs

@@ -172,7 +172,7 @@ impl SectionPlaneCommand {
             self.kind == SectionKind::Slice,
             depth,
         );
-        EntityType::Extended(entity)
+        EntityType::Extended(Box::new(entity))
     }
 
     fn line_at(&self, point: DVec3, viewing: DVec3, vertical_hint: DVec3) -> (Vec<DVec3>, DVec3) {

src/modules/view/plot_window.rs

@@ -96,7 +96,9 @@ impl CadCommand for PlotWindowCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 }
 

src/modules/view/zoom_window.rs

@@ -175,6 +175,8 @@ impl CadCommand for ZoomWindowCommand {
             plinegen: true,
             fill_tris: vec![],
             fill_tris_low: Vec::new(),
-        })
+        
+            ..Default::default()
+})
     }
 }