feat: restore-all session recovery, ?file= deep links, offline PWA

Session recovery: more than one pending snapshot adds a 'Restore all'
button to the Recover Drawing modal — every snapshot goes through the
exact same guarded path as a single restore (deleted only after its
own open succeeds). The open-tab list and active tab persist to
localStorage on web (open/save/close) and the remembered tab is
re-selected once a restore batch settles; the modal notes how many
drawings the session had. Nothing is auto-opened.

Deep links: ?file=<url|name> opens a drawing at boot. http(s) URLs
must end in .dwg/.dxf and are fetched with the same streaming,
64 MB-capped, 8 s-deadline reader the remote images use, then go
through the guarded open queue; cross-origin opens announce the
origin first. Bare names resolve from the browser's recent storage,
with a hint when absent. Everything else (file:, javascript:, drive
letters, non-drawing tails) is refused with a console note.

Offline PWA: the app was installable (manifest) but downloaded its
55 MB bundle on every visit. A cache-first service worker now serves
the whole bundle from Cache Storage after one online visit —
navigations network-first so updates land, hashed assets
stale-while-revalidate, non-GET/cross-origin passthrough, old caches
cleaned on activate, and the waiting-worker update flow documented.
The build wrapper stamps the cache version from the bundle hash and
hard-fails if sw.js is missing or unstamped.

Also fixes a locale group mismatch on the DATALINK pick notice
(catalog said a display group that does not exist in the ftl
sources).

locales/ar-SA/opencadstudio.ftl

@@ -2010,6 +2010,9 @@ file =
     .drawing-not-loaded-in-the-browser = رسم غير محمّل في المتصفح: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" بأبعاد __ocs_fmt_1__×__ocs_fmt_2__ بكسل ويتطلب فك ترميزه __ocs_fmt_3__ ميغابايت، وهو فوق حد __ocs_fmt_4__ ميغابايت للصور في هذا الإصدار — لا يمكن إرفاقه. تُرفَق الصور ضمن الحد تلقائيًا بدقة عرض مخفَّضة عند الحاجة.
     .image-refusal-unknown-size = تعذّر قياس أبعاد "__ocs_fmt_0__" من ترويسته وسيتجاوز فك ترميزه حد الصور __ocs_fmt_1__ ميغابايت في هذا الإصدار — لا يمكن إرفاقه.
+    .restore-all = استعادة الكل
+    .restoring-drawing-s = جارٍ استعادة __ocs_fmt_0__ رسم…
+    .session-had-open-drawing-s = كانت الجلسة تضم __ocs_fmt_0__ رسمًا مفتوحًا.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  حدد الكائنات (__ocs_arg_count__ محدد، Enter للتطبيق):
@@ -3590,8 +3593,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: مقياس التعليق التوضيحي النشط غير متاح.
     .opening-ocs-discussions-for-help-and-questions = يجري فتح مناقشات OCS للمساعدة والأسئلة...
     .opening-ocs-web = يجري فتح OCS Web...
-    .opening-the-command-reference = فتح مرجع الأوامر...
     .browser-cannot-open-typed-path = لا يستطيع المتصفح فتح مسار مكتوب؛ اختر الملف بدلاً من ذلك.
+    .opening-the-command-reference = فتح مرجع الأوامر...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" محمّل بالفعل بمحتوى مختلف؛ تم الاحتفاظ بالملف الموجود.
     .opening-patreon-page = يجري فتح صفحة Patreon...
     .opening-feedback-page = يجري فتح صفحة الملاحظات...

locales/bg-BG/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = Чертежът не е зареден в браузъра: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" е __ocs_fmt_1__×__ocs_fmt_2__ px и при декодиране би заемала __ocs_fmt_3__ MB — над __ocs_fmt_4__ MB лимита за изображения на тази версия, затова не може да бъде прикачена. Изображенията в рамките на лимита се прикачват автоматично с намалена разделителна способност при нужда.
     .image-refusal-unknown-size = Размерът на „__ocs_fmt_0__“ не можа да се измери от заглавната му част, а декодирането му би надвишило __ocs_fmt_1__ MB лимита на тази сборка — не може да се прикачи.
+    .restore-all = Възстанови всички
+    .restoring-drawing-s = Възстановяване на __ocs_fmt_0__ чертеж(а)…
+    .session-had-open-drawing-s = Сесията е имала __ocs_fmt_0__ отворени чертежа.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  Избери обекти (__ocs_arg_count__ избрани, Enter за прилагане):
@@ -3577,8 +3580,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: активният анотационен мащаб не е наличен.
     .opening-ocs-discussions-for-help-and-questions = Отваряне на OCS дискусии за помощ и въпроси...
     .opening-ocs-web = Отваряне на OCS уебсайта...
-    .opening-the-command-reference = Отваряне на справочника за команди...
     .browser-cannot-open-typed-path = Браузърът не може да отвори въведен път; изберете файла.
+    .opening-the-command-reference = Отваряне на справочника за команди...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" вече е зареден с различно съдържание; съществуващият файл е запазен.
     .opening-patreon-page = Отваряне на страницата в Patreon...
     .opening-feedback-page = Отваряне на страницата за обратна връзка...

locales/cs-CZ/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = Výkres není v prohlížeči načten: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" má __ocs_fmt_1__×__ocs_fmt_2__ px a při dekódování by zabrala __ocs_fmt_3__ MB, přes limit __ocs_fmt_4__ MB pro obrázky v této verzi — nelze ji připojit. Obrázky v rámci limitu se podle potřeby připojují automaticky se sníženým rozlišením zobrazení.
     .image-refusal-unknown-size = „__ocs_fmt_0__“ nešlo změřit ze záhlaví a jeho dekódování by překročilo limit __ocs_fmt_1__ MB tohoto sestavení — nelze připojit.
+    .restore-all = Obnovit vše
+    .restoring-drawing-s = Obnovování __ocs_fmt_0__ výkres(ů)…
+    .session-had-open-drawing-s = Relace měla otevřeno __ocs_fmt_0__ výkres(ů).
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Vyberte objekty (vybráno __ocs_arg_count__, použít Enter):
@@ -3575,8 +3578,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: aktivní měřítko anotací není k dispozici.
     .opening-ocs-discussions-for-help-and-questions = Otevírání diskuzí OCS pro nápovědu a dotazy...
     .opening-ocs-web = Otevírání webu OCS...
-    .opening-the-command-reference = Otevírání referenční příručky příkazů...
     .browser-cannot-open-typed-path = Prohlížeč nemůže otevřít zadanou cestu; vyberte soubor.
+    .opening-the-command-reference = Otevírání referenční příručky příkazů...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" je již načten s jiným obsahem; existující soubor byl zachován.
     .opening-patreon-page = Otevírání stránky Patreon...
     .opening-feedback-page = Otevírá se stránka zpětné vazby...

locales/de-DE/opencadstudio.ftl

@@ -1998,6 +1998,9 @@ file =
     .drawing-not-loaded-in-the-browser = Zeichnung ist nicht im Browser geladen: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" hat __ocs_fmt_1__×__ocs_fmt_2__ px und würde beim Dekodieren __ocs_fmt_3__ MB belegen, über dem __ocs_fmt_4__ MB Bildlimit dieses Builds — es kann nicht angehängt werden. Bilder innerhalb des Limits werden bei Bedarf automatisch mit reduzierter Anzeigeanflösung angehängt.
     .image-refusal-unknown-size = „__ocs_fmt_0__“ konnte anhand des Headers nicht vermessen werden, und das Dekodieren überschreitet das __ocs_fmt_1__-MB-Limit dieses Builds — kann nicht angehängt werden.
+    .restore-all = Alle wiederherstellen
+    .restoring-drawing-s = __ocs_fmt_0__ Zeichnung(en) werden wiederhergestellt…
+    .session-had-open-drawing-s = Die Sitzung hatte __ocs_fmt_0__ geöffnete Zeichnung(en).
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Objekte auswählen (__ocs_arg_count__ ausgewählt, Eingabe zum Anwenden):
@@ -3576,8 +3579,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: Die aktive Annotationsskala ist nicht verfügbar.
     .opening-ocs-discussions-for-help-and-questions = Eröffnung OCS Diskussionen für Hilfe und Fragen...
     .opening-ocs-web = Öffnen OCS Web...
-    .opening-the-command-reference = Öffnen der Befehlsreferenz...
     .browser-cannot-open-typed-path = Der Browser kann einen eingegebenen Pfad nicht öffnen; wähle die Datei.
+    .opening-the-command-reference = Öffnen der Befehlsreferenz...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" ist bereits mit anderem Inhalt geladen; die vorhandene Datei wurde behalten.
     .opening-patreon-page = Eröffnungsseite Patreon...
     .opening-feedback-page = Feedbackseite öffnen...

locales/el-GR/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = Το σχέδιο δεν έχει φορτωθεί στο πρόγραμμα περιήγησης: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = Το "__ocs_fmt_0__" είναι __ocs_fmt_1__×__ocs_fmt_2__ px και η αποκωδικοποίησή του θα απαιτούσε __ocs_fmt_3__ MB, πάνω από το όριο __ocs_fmt_4__ MB για εικόνες σε αυτή την έκδοση — δεν μπορεί να επισυναφθεί. Οι εικόνες εντός του ορίου επισυνάπτονται κατά ανάγκη αυτόματα σε μειωμένη ανάλυση εμφάνισης.
     .image-refusal-unknown-size = Το "__ocs_fmt_0__" δεν μπόρεσε να μετρηθεί από την κεφαλίδα του και η αποκωδικοποίησή του θα ξεπερνούσε το όριο __ocs_fmt_1__ MB αυτής της build — δεν μπορεί να επισυναφθεί.
+    .restore-all = Επαναφορά όλων
+    .restoring-drawing-s = Επαναφορά __ocs_fmt_0__ σχέδιο(α)…
+    .session-had-open-drawing-s = Η συνεδρία είχε __ocs_fmt_0__ ανοιχτά σχέδια.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  Επιλέξτε αντικείμενα (__ocs_arg_count__ επιλεγμένα, Enter για εφαρμογή):
@@ -3572,8 +3575,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: η ενεργή κλίμακα επισημείωσης δεν είναι διαθέσιμη.
     .opening-ocs-discussions-for-help-and-questions = Άνοιγμα των συζητήσεων OCS για βοήθεια και ερωτήσεις...
     .opening-ocs-web = Άνοιγμα του OCS Web...
-    .opening-the-command-reference = Άνοιγμα της αναφοράς εντολών...
     .browser-cannot-open-typed-path = Ο browser δεν μπορεί να ανοίξει πληκτρολογημένη διαδρομή· διάλεξε το αρχείο.
+    .opening-the-command-reference = Άνοιγμα της αναφοράς εντολών...
     .already-loaded-different-contents-kept = Το "__ocs_fmt_0__" είναι ήδη φορτωμένο με διαφορετικό περιεχόμενο· διατηρήθηκε το υπάρχον αρχείο.
     .opening-patreon-page = Άνοιγμα της σελίδας Patreon...
     .opening-feedback-page = Άνοιγμα της σελίδας σχολίων...

locales/en-US/opencadstudio.ftl

@@ -1998,6 +1998,9 @@ file =
     .drawing-not-loaded-in-the-browser = Drawing not loaded in the browser: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" is __ocs_fmt_1__×__ocs_fmt_2__ px and would decode to __ocs_fmt_3__ MB, over the __ocs_fmt_4__ MB image limit of this build — it cannot be attached. Images within the limit are attached at a reduced display resolution when needed.
     .image-refusal-unknown-size = "__ocs_fmt_0__" could not be sized from its header and decoding it exceeded the __ocs_fmt_1__ MB image limit of this build — it cannot be attached.
+    .restore-all = Restore all
+    .restoring-drawing-s = Restoring __ocs_fmt_0__ drawing(s)…
+    .session-had-open-drawing-s = Session had __ocs_fmt_0__ open drawing(s).
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  Select objects (__ocs_arg_count__ selected, Enter to apply):
@@ -3573,8 +3576,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: the active annotation scale is unavailable.
     .opening-ocs-discussions-for-help-and-questions = Opening OCS Discussions for help and questions...
     .opening-ocs-web = Opening OCS Web...
-    .opening-the-command-reference = Opening the command reference...
     .browser-cannot-open-typed-path = The browser cannot open a typed path; pick the file instead.
+    .opening-the-command-reference = Opening the command reference...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" is already loaded with different contents; the existing file was kept.
     .opening-patreon-page = Opening Patreon page...
     .opening-feedback-page = Opening feedback page...

locales/es-ES/opencadstudio.ftl

@@ -1998,6 +1998,9 @@ file =
     .drawing-not-loaded-in-the-browser = Dibujo no cargado en el navegador: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" tiene __ocs_fmt_1__×__ocs_fmt_2__ px y al decodificarse ocuparía __ocs_fmt_3__ MB, por encima del límite de __ocs_fmt_4__ MB por imagen de esta versión; no se puede adjuntar. Las imágenes dentro del límite se adjuntan automáticamente con una resolución de visualización reducida cuando es necesario.
     .image-refusal-unknown-size = "__ocs_fmt_0__" no pudo medirse por su cabecera y decodificarlo excedería el límite de __ocs_fmt_1__ MB de esta build — no se puede adjuntar.
+    .restore-all = Restaurar todo
+    .restoring-drawing-s = Restaurando __ocs_fmt_0__ dibujos…
+    .session-had-open-drawing-s = La sesión tenía __ocs_fmt_0__ dibujos abiertos.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  Seleccione objetos (__ocs_arg_count__ seleccionados, Enter para aplicar):
@@ -3578,8 +3581,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: la escala de anotación activa no está disponible.
     .opening-ocs-discussions-for-help-and-questions = Abriendo Debates de OCS para obtener ayuda y hacer preguntas...
     .opening-ocs-web = Abriendo OCS Web...
-    .opening-the-command-reference = Abriendo la referencia de comandos...
     .browser-cannot-open-typed-path = El navegador no puede abrir una ruta escrita; elige el archivo.
+    .opening-the-command-reference = Abriendo la referencia de comandos...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" ya está cargado con contenido diferente; se conservó el archivo existente.
     .opening-patreon-page = Abriendo la página de Patreon...
     .opening-feedback-page = Abriendo la página de comentarios...

locales/fi-FI/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = Piirustusta ei ole ladattu selaimeen: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" on __ocs_fmt_1__×__ocs_fmt_2__ px ja sen purkaminen veisi __ocs_fmt_3__ MB, yli tämän version __ocs_fmt_4__ MB:n kuvarajan — sitä ei voi liittää. Rajan sisällä olevat kuvat liitetään tarvittaessa automaattisesti pienemmällä näyttötarkkuudella.
     .image-refusal-unknown-size = Kohteen "__ocs_fmt_0__" kokoa ei voitu mitata otsakkeesta ja sen purkaminen ylittäisi tämän käännöksen __ocs_fmt_1__ MB kuvarajan — sitä ei voi liittää.
+    .restore-all = Palauta kaikki
+    .restoring-drawing-s = Palautetaan __ocs_fmt_0__ piirustusta…
+    .session-had-open-drawing-s = Istunnossa oli __ocs_fmt_0__ avointa piirustusta.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Valitse objektit (__ocs_arg_count__ valittu, Enter käytettäväksi):
@@ -3577,8 +3580,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: aktiivinen huomautusasteikko ei ole käytettävissä.
     .opening-ocs-discussions-for-help-and-questions = OCS-keskustelujen avaaminen apua ja kysymyksiä varten...
     .opening-ocs-web = Avataan OCS Web...
-    .opening-the-command-reference = Avataan komentoviittausta...
     .browser-cannot-open-typed-path = Selain ei voi avata kirjoitettua polkua; valitse tiedosto.
+    .opening-the-command-reference = Avataan komentoviittausta...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" on jo ladattu eri sisällöllä; olemassa oleva tiedosto säilytettiin.
     .opening-patreon-page = Avataan Patreon-sivua...
     .opening-feedback-page = Palautesivua avataan...

locales/fr-FR/opencadstudio.ftl

@@ -1998,6 +1998,9 @@ file =
     .drawing-not-loaded-in-the-browser = Dessin non chargé dans le navigateur : __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" fait __ocs_fmt_1__×__ocs_fmt_2__ px et son décodage nécessiterait __ocs_fmt_3__ Mo, au-delà de la limite de __ocs_fmt_4__ Mo par image de cette version — elle ne peut pas être jointe. Les images dans la limite sont jointes automatiquement à une résolution d'affichage réduite si nécessaire.
     .image-refusal-unknown-size = "__ocs_fmt_0__" n’a pas pu être mesuré par son en-tête et son décodage dépasserait la limite de __ocs_fmt_1__ Mo de cette version — impossible de l’attacher.
+    .restore-all = Tout restaurer
+    .restoring-drawing-s = Restauration de __ocs_fmt_0__ dessin(s)…
+    .session-had-open-drawing-s = La session avait __ocs_fmt_0__ dessin(s) ouvert(s).
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Sélectionner les objets (__ocs_arg_count__ sélectionnés, Entrez pour appliquer) :
@@ -3578,8 +3581,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE : l'échelle d'annotation active n'est pas disponible.
     .opening-ocs-discussions-for-help-and-questions = Ouverture OCS Discussions pour l'aide et les questions...
     .opening-ocs-web = Ouverture du site Web OCS...
-    .opening-the-command-reference = Ouverture de la référence des commandes...
     .browser-cannot-open-typed-path = Le navigateur ne peut pas ouvrir un chemin saisi ; choisissez le fichier.
+    .opening-the-command-reference = Ouverture de la référence des commandes...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" est déjà chargé avec un contenu différent ; le fichier existant a été conservé.
     .opening-patreon-page = Ouverture de la page Patreon...
     .opening-feedback-page = Ouverture de la page de rétroaction...

locales/hi-IN/opencadstudio.ftl

@@ -1986,6 +1986,9 @@ file =
     .drawing-not-loaded-in-the-browser = ड्रॉइंग ब्राउज़र में लोड नहीं है: __ocs_fmt_0__।
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" __ocs_fmt_1__×__ocs_fmt_2__ px है और इसे डिकोड करने पर __ocs_fmt_3__ MB लगेगा, जो इस बिल्ड की __ocs_fmt_4__ MB छवि सीमा से अधिक है — इसे संलग्न नहीं किया जा सकता। सीमा के भीतर की छवियाँ आवश्यकता पड़ने पर स्वचालित रूप से घटी हुई डिस्प्ले रिज़ॉल्यूशन पर संलग्न की जाती हैं।
     .image-refusal-unknown-size = "__ocs_fmt_0__" को उसके हेडर से मापा नहीं जा सका और उसे डिकोड करना इस बिल्ड की __ocs_fmt_1__ MB छवि सीमा पार कर देगा — जोड़ा नहीं जा सकता।
+    .restore-all = सभी पुनर्स्थापित करें
+    .restoring-drawing-s = __ocs_fmt_0__ ड्रॉइंग पुनर्स्थापित की जा रही हैं…
+    .session-had-open-drawing-s = सत्र में __ocs_fmt_0__ ड्रॉइंग खुली थीं।
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ ऑब्जेक्ट चुनें (__ocs_arg_count__ चयनित, लागू करने के लिए Enter दबाएँ):
@@ -3566,8 +3569,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: सक्रिय एनोटेशन स्केल अनुपलब्ध है।
     .opening-ocs-discussions-for-help-and-questions = OCS मदद और प्रश्नों के लिए चर्चा खोलना।
     .opening-ocs-web = OCS वेब खोलना ...
-    .opening-the-command-reference = कमांड संदर्भ खोला जा रहा है...
     .browser-cannot-open-typed-path = ब्राउज़र टाइप किए गए पथ को नहीं खोल सकता; इसके बजाय फ़ाइल चुनें।
+    .opening-the-command-reference = कमांड संदर्भ खोला जा रहा है...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" अलग सामग्री के साथ पहले से लोड है; मौजूदा फ़ाइल रखी गई।
     .opening-patreon-page = Patreon पृष्ठ खोला जा रहा है…
     .opening-feedback-page = प्रतिक्रिया पृष्ठ खोलना

locales/hu-HU/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = A raj nincs betöltve a böngészőben: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = A(z) "__ocs_fmt_0__" __ocs_fmt_1__×__ocs_fmt_2__ px felbontású, és a dekódolása __ocs_fmt_3__ MB-ot igényelne — ez meghaladja e build __ocs_fmt_4__ MB-os képhatárát, ezért nem csatolható. A határon belüli képek szükség esetén automatikusan csökkentett megjelenítési felbontással csatolódnak.
     .image-refusal-unknown-size = A(z) "__ocs_fmt_0__" nem mérhető a fejlécéből, és dekódolása meghaladná ezen build __ocs_fmt_1__ MB-os képhatárát — nem csatolható.
+    .restore-all = Összes visszaállítása
+    .restoring-drawing-s = __ocs_fmt_0__ rajz(ok) visszaállítása…
+    .session-had-open-drawing-s = A munkamenetben __ocs_fmt_0__ rajz volt megnyitva.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Objektumok kiválasztása (__ocs_arg_count__ kiválasztva, Enter alkalmazni):
@@ -3577,8 +3580,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: az aktív annotációs skála nem érhető el.
     .opening-ocs-discussions-for-help-and-questions = A OCS beszélgetések megnyitása segítségért és kérdésekért...
     .opening-ocs-web = A OCS web megnyitása...
-    .opening-the-command-reference = A parancsreferencia megnyitása...
     .browser-cannot-open-typed-path = A böngésző nem nyithat meg beírt útvonalat; válaszd a fájlt.
+    .opening-the-command-reference = A parancsreferencia megnyitása...
     .already-loaded-different-contents-kept = A(z) "__ocs_fmt_0__" már betöltve eltérő tartalommal; a meglévő fájl megőrizve.
     .opening-patreon-page = Patreon oldal megnyitása...
     .opening-feedback-page = Visszajelzési oldal megnyitása...

locales/it-IT/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = Disegno non caricato nel browser: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" è di __ocs_fmt_1__×__ocs_fmt_2__ px e la decodifica richiederebbe __ocs_fmt_3__ MB, oltre il limite di __ocs_fmt_4__ MB per immagine di questa build: non può essere allegata. Le immagini entro il limite vengono allegate automaticamente a risoluzione di visualizzazione ridotta quando necessario.
     .image-refusal-unknown-size = "__ocs_fmt_0__" non è stato misurabile dall’intestazione e decodificarlo supererebbe il limite di __ocs_fmt_1__ MB di questa build — impossibile allegarlo.
+    .restore-all = Ripristina tutto
+    .restoring-drawing-s = Ripristino di __ocs_fmt_0__ disegno/i…
+    .session-had-open-drawing-s = La sessione aveva __ocs_fmt_0__ disegni aperti.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Seleziona oggetti (__ocs_arg_count__ selezionato, Enter da applicare):
@@ -3577,8 +3580,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: la scala di annotazione attiva non è disponibile.
     .opening-ocs-discussions-for-help-and-questions = Apertura delle discussioni OCS per assistenza e domande...
     .opening-ocs-web = Apertura del Web OCS...
-    .opening-the-command-reference = Apertura del riferimento dei comandi...
     .browser-cannot-open-typed-path = Il browser non può aprire un percorso digitato; scegli il file.
+    .opening-the-command-reference = Apertura del riferimento dei comandi...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" è già caricato con contenuti diversi; il file esistente è stato mantenuto.
     .opening-patreon-page = Apertura della pagina Patreon...
     .opening-feedback-page = Apertura della pagina di feedback...

locales/ja-JP/opencadstudio.ftl

@@ -1988,6 +1988,9 @@ file =
     .drawing-not-loaded-in-the-browser = 図面がブラウザーに読み込まれていません: __ocs_fmt_0__。
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" は __ocs_fmt_1__×__ocs_fmt_2__ px で、デコードすると __ocs_fmt_3__ MB 必要となり、このビルドの __ocs_fmt_4__ MB の画像上限を超えるため添付できません。上限内の画像は、必要に応じて自動的に低下させた表示解像度で添付されます。
     .image-refusal-unknown-size = "__ocs_fmt_0__" のサイズをヘッダーから測定できず、デコードするとこのビルドの __ocs_fmt_1__ MB 画像制限を超えます — 添付できません。
+    .restore-all = すべて復元
+    .restoring-drawing-s = __ocs_fmt_0__ 件の図面を復元しています…
+    .session-had-open-drawing-s = セッションでは __ocs_fmt_0__ 件の図面が開いていました。
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  オブジェクトを選択（__ocs_arg_count__ 個選択、Enter で適用）:
@@ -3566,8 +3569,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: 現在の注釈尺度は利用できません。
     .opening-ocs-discussions-for-help-and-questions = ヘルプと質問のため OCS ディスカッションを開いています...
     .opening-ocs-web = OCS Web を開いています...
-    .opening-the-command-reference = コマンドリファレンスを開いています...
     .browser-cannot-open-typed-path = ブラウザは入力されたパスを開けません。ファイルを選択してください。
+    .opening-the-command-reference = コマンドリファレンスを開いています...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" は既に別の内容で読み込まれています。既存のファイルを保持しました。
     .opening-patreon-page = Patreon ページを開いています...
     .opening-feedback-page = フィードバックページを開いています...

locales/ko-KR/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = 도면이 브라우저에 로드되지 않았습니다: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__"은(는) __ocs_fmt_1__×__ocs_fmt_2__ px이며 디코딩 시 __ocs_fmt_3__ MB가 필요해 이 빌드의 __ocs_fmt_4__ MB 이미지 한도를 초과하므로 첨부할 수 없습니다. 한도 이내의 이미지는 필요할 때 자동으로 낮춘 표시 해상도로 첨부됩니다.
     .image-refusal-unknown-size = "__ocs_fmt_0__"의 크기를 헤더에서 측정할 수 없고 디코딩 시 이 빌드의 __ocs_fmt_1__ MB 이미지 한도를 초과합니다 — 첨부할 수 없습니다.
+    .restore-all = 모두 복원
+    .restoring-drawing-s = __ocs_fmt_0__ 도면을 복원하는 중…
+    .session-had-open-drawing-s = 세션에서 __ocs_fmt_0__ 도면이 열려 있었습니다.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ 객체 선택(__ocs_arg_count__ 선택, Enter 적용):
@@ -3577,8 +3580,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: 활성 주석 축척을 사용할 수 없습니다.
     .opening-ocs-discussions-for-help-and-questions = OCS 열기 도움말 및 질문에 대한 토론...
     .opening-ocs-web = OCS 웹을 여는 중...
-    .opening-the-command-reference = 명령 참조 열기...
     .browser-cannot-open-typed-path = 브라우저는 입력한 경로를 열 수 없습니다. 파일을 선택하세요.
+    .opening-the-command-reference = 명령 참조 열기...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__"이(가) 이미 다른 내용으로 로드되었습니다. 기존 파일을 유지했습니다.
     .opening-patreon-page = Patreon 페이지를 여는 중...
     .opening-feedback-page = 피드백 페이지를 여는 중...

locales/nl-NL/opencadstudio.ftl

@@ -1998,6 +1998,9 @@ file =
     .drawing-not-loaded-in-the-browser = Tekening is niet geladen in de browser: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" is __ocs_fmt_1__×__ocs_fmt_2__ px en zou bij het decoderen __ocs_fmt_3__ MB nodig hebben, boven de __ocs_fmt_4__ MB afbeeldingslimiet van deze build — het kan niet worden bijgevoegd. Afbeeldingen binnen de limiet worden zo nodig automatisch met een verlaagde weergaveresolutie bijgevoegd.
     .image-refusal-unknown-size = "__ocs_fmt_0__" kon niet via de header gemeten worden en decoderen overschrijdt de __ocs_fmt_1__ MB-limiet van deze build — kan niet worden toegevoegd.
+    .restore-all = Alles herstellen
+    .restoring-drawing-s = __ocs_fmt_0__ tekening(en) worden hersteld…
+    .session-had-open-drawing-s = De sessie had __ocs_fmt_0__ tekening(en) open.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Selecteer objecten (__ocs_arg_count__ geselecteerd, Voer in om toe te passen):
@@ -3576,8 +3579,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: de actieve annotatieschaal is niet beschikbaar.
     .opening-ocs-discussions-for-help-and-questions = Openen OCS Discussie voor hulp en vragen...
     .opening-ocs-web = Openen OCS Web...
-    .opening-the-command-reference = Commandoreferentie openen...
     .browser-cannot-open-typed-path = De browser kan een getypt pad niet openen; kies het bestand.
+    .opening-the-command-reference = Commandoreferentie openen...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" is al geladen met andere inhoud; het bestaande bestand is bewaard.
     .opening-patreon-page = Patreon pagina openen...
     .opening-feedback-page = Herinneringspagina openen...

locales/pl-PL/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = Rysunek nie został załadowany w przeglądarce: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" ma __ocs_fmt_1__×__ocs_fmt_2__ px, a jej dekodowanie wymagałoby __ocs_fmt_3__ MB — ponad __ocs_fmt_4__ MB limit obrazu w tej wersji — więc nie może być dołączona. Obrazy w ramach limitu są w razie potrzeby dołączane automatycznie w obniżonej rozdzielczości wyświetlania.
     .image-refusal-unknown-size = „__ocs_fmt_0__” nie dał się zmierzyć z nagłówka, a jego dekodowanie przekroczy limit __ocs_fmt_1__ MB tej kompilacji — nie można go dołączyć.
+    .restore-all = Przywróć wszystkie
+    .restoring-drawing-s = Przywracanie __ocs_fmt_0__ rysunków…
+    .session-had-open-drawing-s = Sesja miała __ocs_fmt_0__ otwartych rysunków.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Wybierz obiekty (wybrano __ocs_arg_count__, zastosowano Enter):
@@ -3577,8 +3580,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: aktywna skala adnotacji jest niedostępna.
     .opening-ocs-discussions-for-help-and-questions = Otwieranie dyskusji OCS w celu uzyskania pomocy i pytań...
     .opening-ocs-web = Otwieranie OCS Web...
-    .opening-the-command-reference = Otwieranie dokumentacji poleceń...
     .browser-cannot-open-typed-path = Przeglądarka nie otworzy wpisanej ścieżki; wybierz plik.
+    .opening-the-command-reference = Otwieranie dokumentacji poleceń...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" jest już wczytany z inną zawartością; zachowano istniejący plik.
     .opening-patreon-page = Otwieranie strony Patreon...
     .opening-feedback-page = Otwieram stronę z opiniami...

locales/pt-BR/opencadstudio.ftl

@@ -1998,6 +1998,9 @@ file =
     .drawing-not-loaded-in-the-browser = Desenho não carregado no navegador: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" tem __ocs_fmt_1__×__ocs_fmt_2__ px e a decodificação exigiria __ocs_fmt_3__ MB, acima do limite de __ocs_fmt_4__ MB por imagem desta versão — não é possível anexá-la. Imagens dentro do limite são anexadas automaticamente com resolução de exibição reduzida quando necessário.
     .image-refusal-unknown-size = "__ocs_fmt_0__" não pôde ser medido pelo cabeçalho e a sua descodificação excedeu o limite de __ocs_fmt_1__ MB desta build — não pode ser anexado.
+    .restore-all = Restaurar tudo
+    .restoring-drawing-s = Restaurando __ocs_fmt_0__ desenhos…
+    .session-had-open-drawing-s = A sessão tinha __ocs_fmt_0__ desenhos abertos.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  Selecione objetos (__ocs_arg_count__ selecionados, Enter para aplicar):
@@ -3578,8 +3581,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: a escala de anotação ativa não está disponível.
     .opening-ocs-discussions-for-help-and-questions = Abrindo Discussões do OCS para ajuda e perguntas...
     .opening-ocs-web = Abrindo OCS Web...
-    .opening-the-command-reference = Abrindo a referência de comandos...
     .browser-cannot-open-typed-path = O navegador não pode abrir um caminho digitado; escolha o ficheiro.
+    .opening-the-command-reference = Abrindo a referência de comandos...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" já está carregado com conteúdo diferente; o ficheiro existente foi mantido.
     .opening-patreon-page = Abrindo página do Patreon...
     .opening-feedback-page = Abrindo página de comentários...

locales/ru-RU/opencadstudio.ftl

@@ -2001,6 +2001,9 @@ file =
     .drawing-not-loaded-in-the-browser = Чертёж не загружен в браузере: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" — __ocs_fmt_1__×__ocs_fmt_2__ px; для декодирования потребовалось бы __ocs_fmt_3__ МБ, что превышает ограничение __ocs_fmt_4__ МБ на изображение в этой сборке, поэтому вложить его нельзя. Изображения в пределах ограничения при необходимости вкладываются автоматически с пониженным разрешением отображения.
     .image-refusal-unknown-size = «__ocs_fmt_0__» не удалось измерить по заголовку, а его декодирование превысит лимит __ocs_fmt_1__ МБ этой сборки — вложить нельзя.
+    .restore-all = Восстановить все
+    .restoring-drawing-s = Восстановление __ocs_fmt_0__ чертежа(ей)…
+    .session-had-open-drawing-s = В сессии было открыто __ocs_fmt_0__ чертежа(ей).
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__ Выберите объекты (__ocs_arg_count__ Выберите, Введите для применения):
@@ -3579,8 +3582,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: активный масштаб аннотаций недоступен.
     .opening-ocs-discussions-for-help-and-questions = Открытие OCS Дискуссии о помощи и вопросах
     .opening-ocs-web = Открытие OCS Веб-сайт
-    .opening-the-command-reference = Открытие справочника команд...
     .browser-cannot-open-typed-path = Браузер не может открыть введённый путь; выберите файл.
+    .opening-the-command-reference = Открытие справочника команд...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" уже загружен с другим содержимым; существующий файл сохранён.
     .opening-patreon-page = Открытие страницы Patreon...
     .opening-feedback-page = Открываем страницу обратной связи...

locales/tr-TR/opencadstudio.ftl

@@ -1981,6 +1981,9 @@ file =
     .drawing-not-loaded-in-the-browser = Çizim tarayıcıya yüklenmedi: __ocs_fmt_0__.
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__" __ocs_fmt_1__×__ocs_fmt_2__ px boyutunda ve çözümlendiğinde __ocs_fmt_3__ MB gerektirir; bu sürümün __ocs_fmt_4__ MB görsel sınırını aştığından eklenemez. Sınır içindeki görseller gerektiğinde otomatik olarak düşürülmüş görüntü çözünürlüğüyle eklenir.
     .image-refusal-unknown-size = "__ocs_fmt_0__" başlığından ölçülemedi ve kodu çözülürse bu sürümün __ocs_fmt_1__ MB görüntü limiti aşılır — eklenemez.
+    .restore-all = Tümünü geri yükle
+    .restoring-drawing-s = __ocs_fmt_0__ çizim geri yükleniyor…
+    .session-had-open-drawing-s = Oturumda __ocs_fmt_0__ açık çizim vardı.
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  Nesneleri seçin (__ocs_arg_count__ seçili, uygulamak için Enter):
@@ -3528,8 +3531,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: Etkin açıklama ölçeği kullanılamıyor.
     .opening-ocs-discussions-for-help-and-questions = Yardım ve sorular için OCS Tartışmaları açılıyor...
     .opening-ocs-web = OCS Web açılıyor...
-    .opening-the-command-reference = Komut başvurusu açılıyor...
     .browser-cannot-open-typed-path = Tarayıcı yazılan bir yolu açamaz; dosyayı seçin.
+    .opening-the-command-reference = Komut başvurusu açılıyor...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__" zaten farklı içerikle yüklü; mevcut dosya tutuldu.
     .opening-patreon-page = Patreon sayfası açılıyor...
     .opening-feedback-page = Geri bildirim sayfası açılıyor...

locales/zh-CN/opencadstudio.ftl

@@ -1985,6 +1985,9 @@ file =
     .drawing-not-loaded-in-the-browser = 图形未加载到浏览器中：__ocs_fmt_0__。
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__"为 __ocs_fmt_1__×__ocs_fmt_2__ 像素，解码需要 __ocs_fmt_3__ MB，超过此版本的 __ocs_fmt_4__ MB 图像上限，因此无法附着。上限内的图像在需要时会自动以降低的显示分辨率附着。
     .image-refusal-unknown-size = 无法从文件头测得“__ocs_fmt_0__”的尺寸，解码将超过本版本 __ocs_fmt_1__ MB 的图像上限——无法附着。
+    .restore-all = 全部恢复
+    .restoring-drawing-s = 正在恢复 __ocs_fmt_0__ 绘图…
+    .session-had-open-drawing-s = 会话中有 __ocs_fmt_0__ 个打开的绘图。
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  选择对象（已选择 __ocs_arg_count__ 个，按 Enter 应用）：
@@ -3561,8 +3564,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: 活动注释表没有可用 。
     .opening-ocs-discussions-for-help-and-questions = 开幕OCS 讨论帮助和问题...
     .opening-ocs-web = 打开OCS网络...
-    .opening-the-command-reference = 正在打开命令参考...
     .browser-cannot-open-typed-path = 浏览器无法打开键入的路径；请改为选择文件。
+    .opening-the-command-reference = 正在打开命令参考...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__"已以不同内容加载；保留了现有文件。
     .opening-patreon-page = 打开帕特伦的页面...
     .opening-feedback-page = 打开反馈页面...

locales/zh-TW/opencadstudio.ftl

@@ -1997,6 +1997,9 @@ file =
     .drawing-not-loaded-in-the-browser = 圖面未載入瀏覽器：__ocs_fmt_0__。
     .image-over-the-decode-limit-cannot-be-attached = "__ocs_fmt_0__"為 __ocs_fmt_1__×__ocs_fmt_2__ 像素，解碼需要 __ocs_fmt_3__ MB，超過此組建的 __ocs_fmt_4__ MB 影像上限，因此無法貼附。上限內的影像會在需要時自動以降低的顯示解析度貼附。
     .image-refusal-unknown-size = 無法從檔頭測得「__ocs_fmt_0__」的尺寸，解碼將超過本版本 __ocs_fmt_1__ MB 的影像上限——無法附加。
+    .restore-all = 全部恢復
+    .restoring-drawing-s = 正在恢復 __ocs_fmt_0__ 繪圖…
+    .session-had-open-drawing-s = 工作階段中有 __ocs_fmt_0__ 個開啟的繪圖。
 
 selection =
     .cmd-select-objects-count-selected-enter-to-app = __ocs_arg_cmd__  選擇物件（已選擇 __ocs_arg_count__ 個，按 Enter 套用）：
@@ -3573,8 +3576,8 @@ view =
     .objectscale-the-active-annotation-scale-is-una = OBJECTSCALE: 活動註解表沒有可用 。
     .opening-ocs-discussions-for-help-and-questions = 開幕OCS 討論幫助和問題...
     .opening-ocs-web = 開啟OCS網路...
-    .opening-the-command-reference = 正在開啟命令參考...
     .browser-cannot-open-typed-path = 瀏覽器無法開啟輸入的路徑；請改為選擇檔案。
+    .opening-the-command-reference = 正在開啟命令參考...
     .already-loaded-different-contents-kept = "__ocs_fmt_0__"已以不同內容載入；保留了現有檔案。
     .opening-patreon-page = 開啟帕特倫的頁面...
     .opening-feedback-page = 開啟反饋頁面...