fix(point): preserve relative marker sizing

Keep rendering, picking, block transforms, and plotted output on the
same viewport-relative PDSIZE geometry without overloading wire width
fields.

src/modules/annotate/aligned_dim.rs

@@ -220,6 +220,7 @@ impl CadCommand for AlignedDimensionCommand {
         let p1 = p1.as_vec3();
         let p2 = p2.as_vec3();
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,
@@ -278,6 +279,7 @@ fn preview_aligned(p1: DVec3, p2: DVec3, dim_pt: DVec3) -> WireModel {
     let d1 = d1.as_vec3();
     let d2 = d2.as_vec3();
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/angular_dim.rs

@@ -161,6 +161,7 @@ fn v3(pt: DVec3) -> Vector3 {
 
 fn preview_wire(points: Vec<Vec3>) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/diameter_dim.rs

@@ -192,6 +192,7 @@ fn v3(p: DVec3) -> Vector3 {
 
 fn preview_line(a: Vec3, b: Vec3) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/dim_baseline.rs

@@ -180,6 +180,7 @@ impl CadCommand for DimBaselineCommand {
         let dim_line_pt2 = dim_line_pt2.as_vec3();
         let pt = pt.as_vec3();
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/annotate/dim_continue.rs

@@ -160,6 +160,7 @@ impl CadCommand for DimContinueCommand {
         let dim_line_pt = p1 + perp * (dim_line_perp - p1.dot(perp));
         let dim_line_pt2 = pt + perp * (dim_line_perp - pt.dot(perp));
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/annotate/dimjogline.rs

@@ -86,6 +86,7 @@ impl CadCommand for DimJogLineCommand {
         }
         let d = 0.3_f32;
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/annotate/dimtedit.rs

@@ -103,6 +103,7 @@ impl CadCommand for DimTeditCommand {
         }
         let d = 0.2_f32;
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/annotate/leader_cmd.rs

@@ -300,6 +300,7 @@ fn preview_wire(pts: &[Vec3], arrow_size: f32) -> WireModel {
         points.push([w2.x, w2.y, w2.z]);
     }
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/linear_dim.rs

@@ -237,6 +237,7 @@ fn v3(pt: DVec3) -> Vector3 {
 
 fn preview_wire(points: Vec<DVec3>) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/mleader_cmd.rs

@@ -227,6 +227,7 @@ fn preview_wire(pts: &[Vec3], arrow_size: f32) -> WireModel {
         points.push([w2.x, w2.y, w2.z]);
     }
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/mleader_edit.rs

@@ -462,6 +462,7 @@ impl CadCommand for MLeaderCollectCommand {
 
 fn preview_wire(pts: &[Vec3]) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/ordinate_dim.rs

@@ -137,6 +137,7 @@ fn ordinate_elbow(feature: DVec3, leader: DVec3, is_x: bool) -> DVec3 {
 
 fn preview_wire(points: Vec<Vec3>) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/qdim.rs

@@ -93,6 +93,7 @@ impl CadCommand for QdimCommand {
         }
         let d = 0.5_f32;
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/annotate/radius_dim.rs

@@ -197,6 +197,7 @@ fn v3(pt: DVec3) -> Vector3 {
 
 fn preview_wire(points: Vec<Vec3>) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/annotate/table_cmd.rs

@@ -199,6 +199,7 @@ impl CadCommand for TableCommand {
             .map(|corner| self.plane.to_world(corner).as_vec3().to_array());
             let [p0, p1, p2, p3] = corners;
             Some(WireModel {
+                point_marker: None,
                 taper_widths: Vec::new(),
                 world_width: 0.0,
                 depth_override: None,

src/modules/annotate/tolerance_cmd.rs

@@ -103,6 +103,7 @@ impl CadCommand for ToleranceCommand {
             pt + self.plane.y * d,
         ];
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/draw/attdef.rs

@@ -201,6 +201,7 @@ impl CadCommand for AttdefCommand {
             pt + self.plane.y * d,
         ];
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/draw/mline.rs

@@ -181,6 +181,7 @@ impl CadCommand for MlineCommand {
             .collect();
         pts.push([pt.x, pt.y, pt.z]);
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/draw/raster_image.rs

@@ -123,6 +123,7 @@ impl CadCommand for ImageCommand {
         let [p0, p1, p2, p3] = corners;
 
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/draw/ray.rs

@@ -85,6 +85,7 @@ impl CadCommand for RayCommand {
         let dir = (pt - base).normalize_or_zero();
         let far = base + dir * DISPLAY_EXTENT;
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,
@@ -187,6 +188,7 @@ impl CadCommand for XLineCommand {
         let far_pos = base + dir * DISPLAY_EXTENT;
         let far_neg = base - dir * DISPLAY_EXTENT;
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/inquiry/area.rs

@@ -362,6 +362,7 @@ impl CadCommand for AreaCommand {
         points.push(to_render(point));
         points.push(to_render(self.points[0]));
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/inquiry/dist.rs

@@ -85,6 +85,7 @@ impl CadCommand for DistCommand {
         let p1 = self.first?;
         // The preview wire is purely visual, so f32 vertices are fine here.
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/inquiry/measuregeom.rs

@@ -70,6 +70,7 @@ impl MeasureGeomCommand {
     /// Build a cyan preview wire connecting the picked points and the cursor.
     fn preview_wire(name: &str, pts: Vec<[f32; 3]>) -> WireModel {
         WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/draw/modify/trim.rs

@@ -3719,6 +3719,7 @@ fn collect_runs(pts: &[[f64; 2]], take: &dyn Fn([f64; 2]) -> bool, out: &mut Vec
 /// Build a preview wire from a NaN-break point list.
 fn preview_wire(points: Vec<[f32; 3]>, color: [f32; 4], name: &str) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/model/primitive_cmd.rs

@@ -511,6 +511,7 @@ inventory::submit!(crate::command::CommandRegistration {
 
 fn wire(name: &str, points: Vec<[f32; 3]>) -> WireModel {
     WireModel {
+        point_marker: None,
         taper_widths: Vec::new(),
         world_width: 0.0,
         depth_override: None,

src/modules/view/plot_window.rs

@@ -54,6 +54,7 @@ impl CadCommand for PlotWindowCommand {
         let p1 = self.p1?.as_vec3();
         // Draw the selection rectangle.
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,

src/modules/view/zoom_window.rs

@@ -136,6 +136,7 @@ impl CadCommand for ZoomWindowCommand {
         let max = p1.max(pt);
         // Draw a rectangle preview
         Some(WireModel {
+            point_marker: None,
             taper_widths: Vec::new(),
             world_width: 0.0,
             depth_override: None,