feat(statusbar): customizable pills with coordinates and clean screen

Add a customization menu (far-right handle) that lists every status-bar
pill with a check mark; toggling a row shows or hides that pill, and the
choice persists across sessions in the config dir.

New pills:
- Coordinates: live cursor readout (re-adds the model-space world offset
  so it shows true drawing coordinates), updated on every move rather
  than only while a command is active.
- Clean Screen: hide the ribbon and side panels for a full canvas.

Co-Authored-By: Claude Opus 4.8 <[email protected]>

src/app/mod.rs

@@ -171,6 +171,12 @@ pub(super) struct OpenCADStudio {
     snapper: Snapper,
     snap_popup_open: bool,
     scale_popup_open: bool,
+    /// True while the status-bar customization menu is open.
+    statusbar_menu_open: bool,
+    /// Clean-screen mode: hide ribbon and side panels for a full canvas.
+    clean_screen: bool,
+    /// Which status-bar pills the user has chosen to show (persisted).
+    statusbar_config: crate::ui::statusbar_config::StatusBarConfig,
     /// Whether Tangent snap was enabled before a tangent-pick command started.
     pre_cmd_tangent: Option<bool>,
     /// Orthogonal drawing constraint (F8): constrains picks to 0°/90°/180°/270°.
@@ -732,6 +738,14 @@ pub enum Message {
     ToggleScalePopup,
     /// Close the scale picker popup.
     CloseScalePopup,
+    /// Toggle the status-bar customization menu open/closed.
+    ToggleStatusBarMenu,
+    /// Close the status-bar customization menu.
+    CloseStatusBarMenu,
+    /// Show/hide a single status-bar pill.
+    ToggleStatusPill(crate::ui::statusbar_config::StatusPill),
+    /// Toggle clean-screen mode (hide ribbon + side panels).
+    ToggleCleanScreen,
     /// Toggle dynamic input overlay (F12).
     ToggleDynInput,
     /// Toggle object snap tracking (F11).
@@ -1188,6 +1202,9 @@ impl OpenCADStudio {
             snapper: Snapper::default(),
             snap_popup_open: false,
             scale_popup_open: false,
+            statusbar_menu_open: false,
+            statusbar_config: crate::ui::statusbar_config::StatusBarConfig::load(),
+            clean_screen: false,
             pre_cmd_tangent: None,
             ortho_mode: false,
             polar_mode: false,

src/app/update.rs

@@ -2130,6 +2130,39 @@ impl OpenCADStudio {
                     return Task::none();
                 }
 
+                // Keep the coordinate readout live on every move, even with no
+                // active command. When a command is running the snap path below
+                // overwrites this with the snapped point.
+                {
+                    let bounds = iced::Rectangle {
+                        x: 0.0,
+                        y: 0.0,
+                        width: vp_size.0,
+                        height: vp_size.1,
+                    };
+                    let paper = if let Some(ref ucs) = self.tabs[i].active_ucs {
+                        let origin = glam::Vec3::new(
+                            ucs.origin.x as f32,
+                            ucs.origin.y as f32,
+                            ucs.origin.z as f32,
+                        );
+                        let normal = ucs_z_axis(ucs);
+                        self.tabs[i]
+                            .scene
+                            .camera
+                            .borrow()
+                            .pick_on_plane(p, bounds, normal, origin)
+                    } else {
+                        self.tabs[i]
+                            .scene
+                            .camera
+                            .borrow()
+                            .pick_on_target_plane(p, bounds)
+                    };
+                    let world = self.tabs[i].scene.paper_to_model(paper);
+                    self.tabs[i].last_cursor_world = world;
+                }
+
                 if self.tabs[i].active_cmd.is_some() {
                     let (vw, vh) = vp_size;
                     let bounds = iced::Rectangle {
@@ -3530,6 +3563,23 @@ impl OpenCADStudio {
                 self.scale_popup_open = false;
                 Task::none()
             }
+            Message::ToggleStatusBarMenu => {
+                self.statusbar_menu_open ^= true;
+                Task::none()
+            }
+            Message::CloseStatusBarMenu => {
+                self.statusbar_menu_open = false;
+                Task::none()
+            }
+            Message::ToggleStatusPill(pill) => {
+                // Keep the menu open so several pills can be toggled in a row.
+                self.statusbar_config.toggle(pill);
+                Task::none()
+            }
+            Message::ToggleCleanScreen => {
+                self.clean_screen ^= true;
+                Task::none()
+            }
             Message::ToggleSnap(t) => {
                 self.snapper.toggle(t);
                 Task::none()

src/app/view.rs

@@ -1057,7 +1057,7 @@ impl OpenCADStudio {
         // Replace the properties panel with a Recent Documents list there.
         let properties_el: Element<'_, Message> = if tab.is_start {
             recent_files_panel(&self.app_menu.recent)
-        } else if self.show_properties {
+        } else if self.show_properties && !self.clean_screen {
             tab.properties.view()
         } else {
             Space::new().into()
@@ -1100,11 +1100,16 @@ impl OpenCADStudio {
         .height(Fill);
 
         let main_ui = container({
-            let mut col = column![self.ribbon.view(
-                is_paper,
-                self.tabs[self.active_tab].history.undo_stack.len(),
-                self.tabs[self.active_tab].history.redo_stack.len(),
-            )];
+            // Clean-screen mode drops the ribbon for a full-canvas view; the
+            // status bar stays so the mode can be toggled back off.
+            let mut col = column![];
+            if !self.clean_screen {
+                col = col.push(self.ribbon.view(
+                    is_paper,
+                    self.tabs[self.active_tab].history.undo_stack.len(),
+                    self.tabs[self.active_tab].history.redo_stack.len(),
+                ));
+            }
             if self.show_file_tabs {
                 col = col.push(doc_tab_bar(&self.tabs, self.active_tab));
             }
@@ -1114,6 +1119,22 @@ impl OpenCADStudio {
                     let scale_pill_enabled = is_model
                         || tab.scene.active_viewport.is_some()
                         || tab.scene.has_selected_viewport();
+                    // The cursor is tracked in local render space; re-add the
+                    // model-space world offset so the readout shows true
+                    // drawing coordinates (paper space carries no offset).
+                    let cursor_coord = {
+                        let lc = tab.last_cursor_world;
+                        if is_model {
+                            let wo = tab.scene.world_offset;
+                            glam::Vec3::new(
+                                lc.x + wo[0] as f32,
+                                lc.y + wo[1] as f32,
+                                lc.z + wo[2] as f32,
+                            )
+                        } else {
+                            lc
+                        }
+                    };
                     self.status_bar.view(
                         &self.snapper,
                         self.snap_popup_open,
@@ -1134,6 +1155,9 @@ impl OpenCADStudio {
                         self.scale_popup_open,
                         scale_pill_enabled,
                         tab.scene.document.header.lineweight_display,
+                        cursor_coord,
+                        self.clean_screen,
+                        &self.statusbar_config,
                     )
                 })
                 .width(Fill)
@@ -1169,6 +1193,12 @@ impl OpenCADStudio {
             iced::widget::Space::new().width(0).height(0).into()
         };
 
+        let statusbar_menu_layer: Element<'_, Message> = if self.statusbar_menu_open {
+            crate::ui::statusbar_menu::statusbar_menu_overlay(&self.statusbar_config)
+        } else {
+            iced::widget::Space::new().width(0).height(0).into()
+        };
+
         let dropdown_layer: Element<'_, Message> = self
             .ribbon
             .dropdown_overlay(
@@ -1204,6 +1234,7 @@ impl OpenCADStudio {
             self.app_menu.view(),
             snap_layer,
             scale_layer,
+            statusbar_menu_layer,
             dropdown_layer,
             layout_ctx_layer,
             qselect_layer,