feat(sysvars): persist Ortho, running OSNAP and Isolate in the drawing

Ortho and the running object-snap set were app-global (settings.txt only) and
Isolate/Hide was a session-only view state, so none survived save/reopen and
none were per-drawing. Bind all three to the file like AutoCAD:

- Ortho -> header.ortho_mode ($ORTHOMODE); running OSNAP <-> header
  .object_snap_mode ($OSMODE bitmask) via a new SnapType<->bit map in settings
  (osmode_from_snaps / snaps_from_osmode, round-trip tested). The header is the
  per-drawing store, live state mirrors the active drawing: adopt header->live
  on open and tab-switch, stamp live->header on save and when leaving a tab, a
  fresh drawing inherits the current values, and SETVAR ORTHOMODE/OSMODE now
  also update the live state. settings.txt stays as the boot/new-drawing
  default; the per-file header overrides it on open.
- Isolate/Hide now set each entity's persisted invisible flag (DXF code 60,
  which acadrust round-trips in DXF and DWG) in addition to the session set;
  End Isolation clears it. The set is reseeded from invisible entities on load
  and after undo/redo, the commands are undoable and mark the tab dirty. The
  renderer already skipped invisible entities, so no render change was needed.

Co-Authored-By: Claude Opus 4.8 <[email protected]>

src/app/update/file.rs

@@ -116,6 +116,45 @@ impl OpenCADStudio {
         self.rebuild_ribbon_modules();
     }
 
+    /// Adopt the per-drawing sysvars stored in tab `i`'s document header —
+    /// Ortho (`$ORTHOMODE`) and the running object-snap set (`$OSMODE`) — into
+    /// the live app state, so each drawing keeps its own. Called when a drawing
+    /// becomes active (open, tab switch). The app-settings values seed the boot
+    /// default; the per-file header overrides it here.
+    pub(in crate::app) fn adopt_header_sysvars(&mut self, i: usize) {
+        if self.tabs[i].is_start {
+            return;
+        }
+        let (ortho, osmode) = {
+            let h = &self.tabs[i].scene.document.header;
+            (h.ortho_mode, h.object_snap_mode)
+        };
+        self.ortho_mode = ortho;
+        // Ortho and Polar are mutually exclusive (ToggleOrtho clears Polar).
+        if ortho {
+            self.polar_mode = false;
+        }
+        let (modes, snap_enabled) = crate::app::settings::snaps_from_osmode(osmode);
+        self.snapper.enabled = modes.into_iter().collect();
+        self.snapper.snap_enabled = snap_enabled;
+    }
+
+    /// Stamp the live per-drawing sysvars (Ortho, running OSNAP) onto tab `i`'s
+    /// document header just before it is written to disk (or before switching
+    /// away from it), so they persist with the drawing.
+    pub(in crate::app) fn stamp_header_sysvars(&mut self, i: usize) {
+        if self.tabs[i].is_start {
+            return;
+        }
+        let osmode = crate::app::settings::osmode_from_snaps(
+            self.snapper.enabled.iter(),
+            self.snapper.snap_enabled,
+        );
+        let h = &mut self.tabs[i].scene.document.header;
+        h.ortho_mode = self.ortho_mode;
+        h.object_snap_mode = osmode;
+    }
+
     /// Apply the persisted default background(s) to tab `idx`. No-op for the
     /// start tab or when no default is set. Refreshes the tab's cached wires
     /// and meshes so background-adaptive colours pick up the change.
@@ -311,6 +350,9 @@ pub(super) fn on_open_file(&mut self) -> Task<Message> {
                 self.tabs[i].scene.document = doc;
                 // Follow the file's saved current UCS from the moment it opens.
                 self.tabs[i].adopt_active_ucs_from_header();
+                // Adopt the drawing's own Ortho ($ORTHOMODE) and running OSNAP
+                // ($OSMODE) so each file keeps its state, like AutoCAD.
+                self.adopt_header_sysvars(i);
                 // Route shared CJK ideographs to the language matching this
                 // drawing's code page (web per-language font split). Drop the
                 // glyph cache if it changed so Han re-resolves to the new
@@ -406,6 +448,10 @@ pub(super) fn on_open_file(&mut self) -> Task<Message> {
                 self.tabs[i].scene.selected = rustc_hash::FxHashSet::default();
                 self.tabs[i].scene.preview_wires = vec![];
                 self.tabs[i].scene.current_layout = "Model".to_string();
+                // Rebuild the Isolate/Hide set from the entities the file itself
+                // marks invisible (DXF code 60), so hidden objects stay hidden on
+                // reopen and End Isolation can bring them back.
+                self.tabs[i].scene.sync_hidden_from_invisible();
                 crate::io::linetypes::populate_document(&mut self.tabs[i].scene.document);
                 self.tabs[i].properties = PropertiesPanel::empty();
                 // Seed the current table / multileader style from the file's
@@ -594,6 +640,9 @@ pub(super) fn on_open_file(&mut self) -> Task<Message> {
                 // reflects them even if they came from settings with no
                 // in-session toggle (#121).
                 self.sync_vport_display(i);
+                // Persist Ortho ($ORTHOMODE) + running OSNAP ($OSMODE) into the
+                // drawing header so they survive save/reopen (per-drawing).
+                self.stamp_header_sysvars(i);
                 // Native: save straight to the known path. Web has no path
                 // (downloads instead), so always go through the Save dialog.
                 #[cfg(not(target_arch = "wasm32"))]
@@ -662,6 +711,8 @@ pub(super) fn on_open_file(&mut self) -> Task<Message> {
                 let close = self.close_save_dialog_window();
                 let i = self.active_tab;
                 sync_annotation_scale_header(&mut self.tabs[i].scene);
+                // Persist Ortho / running OSNAP into the header (Save-As path).
+                self.stamp_header_sysvars(i);
                 self.sync_truck_solids_to_acis(i);
 
                 // Native: write to the chosen path. Web: download the bytes

src/app/update/mod.rs

@@ -664,11 +664,17 @@ impl OpenCADStudio {
 
             // ── Document tabs ─────────────────────────────────────────────
             Message::TabNew => {
+                // Preserve the outgoing drawing's Ortho / running OSNAP.
+                self.stamp_header_sysvars(self.active_tab);
                 self.tab_counter += 1;
                 let new_tab = super::document::DocumentTab::new_drawing(self.tab_counter);
                 self.tabs.push(new_tab);
                 self.active_tab = self.tabs.len() - 1;
                 let idx = self.active_tab;
+                // A fresh drawing inherits the app's current Ortho / OSNAP so
+                // creating one doesn't silently reset them (its header default is
+                // 0 = no snaps); saving then persists them into the file.
+                self.stamp_header_sysvars(idx);
                 self.apply_bg_default(idx);
                 self.sync_ribbon_layers();
                 self.sync_ribbon_styles();
@@ -687,6 +693,10 @@ impl OpenCADStudio {
                         // The attribute editor is tab-scoped; leaving its tab
                         // drops it (its handle is that document's, not this one's).
                         self.cancel_attr_editor();
+                        // Persist the outgoing drawing's Ortho / running OSNAP
+                        // before leaving it, so switching back restores them.
+                        let prev = self.active_tab;
+                        self.stamp_header_sysvars(prev);
                     }
                     self.active_tab = idx;
                     self.sync_ribbon_layers();
@@ -698,6 +708,8 @@ impl OpenCADStudio {
                     self.sync_ribbon_from_selection();
                     // Grid/snap follow the newly active drawing's viewport.
                     self.adopt_view_display(idx);
+                    // Ortho / running OSNAP follow the newly active drawing.
+                    self.adopt_header_sysvars(idx);
                     // Shared CJK ideographs follow the newly active drawing's
                     // language; re-tessellate if it differs from the last. (#141)
                     if crate::scene::text::web_font::set_cjk_lang_from_codepage(