Finish Ramox edge and slice integration

locales/ru-RU/opencadstudio.ftl

@@ -768,7 +768,20 @@ common =
     .slice-could-not-determine-the-solid-s-extent = SLICE: не может определить степень твердого тела.
     .slice-cut-at-ax-value-kept-the-half = SLICE: вырезать на __ocs_fmt_0__=__ocs_fmt_1__, сохранить __ocs_fmt_2__ половину.
     .slice-select-exactly-one-solid-created-this-se = SLICE: выберите один твердотельный, созданный на этом сеансе.
-    .slice-the-plane-does-not-cross-the-solid-on-th = SLICE: плоскость не пересекает твердую часть на удерживаемой стороне.
+   .slice-the-plane-does-not-cross-the-solid-on-th = SLICE: плоскость не пересекает твердую часть на удерживаемой стороне.
+    .both = Both
+    .slice-select-at-least-one-target = SLICE: select at least one solid or surface.
+    .slice-invalid-plane = SLICE: the cutting plane is invalid.
+    .slice-side-point-on-plane = SLICE: choose a point away from the cutting plane.
+    .slice-plane-misses-target = SLICE: the cutting plane does not cross every selected object; no object was changed.
+    .slice-unsupported-intersection = SLICE: the selected geometry has an unsupported surface intersection; no object was changed.
+    .slice-coincident-plane = SLICE: the cutting plane is coincident with source geometry; no object was changed.
+    .slice-topology-refused = SLICE: the selected topology could not be split safely; no object was changed.
+    .slice-result-encode-failed = SLICE: a result could not be encoded; no object was changed.
+    .slice-result-display-failed = SLICE: a result could not be displayed completely; no object was changed.
+    .slice-result-commit-failed = SLICE: a result could not be committed; all source objects were retained.
+    .slice-retained-update-failed = SLICE: a retained result could not be updated.
+    .slice-created-results = SLICE: created __ocs_fmt_0__ result object(s).
     .splinefit-fit-a-spline-through-n-points = SPLINEFIT: проведите сплин через точки __ocs_fmt_0__.
     .splinefit-need-at-least-3-points = SPLINEFIT: необходимо не менее 3 баллов.
     .splinefit-select-a-polyline-to-fit-a-spline-th = SPLINEFIT: выберите полилин, чтобы соответствовать сплину.
@@ -2198,7 +2211,27 @@ draw =
     .slice-cutting-plane-axis-x-y-z-add-top-bottom = SLICE  ось режущей плоскости [X/Y/Z] (добавить TOP/BOTTOM путем набора текста):
     .slice-offset-along-x = SLICE  Смещение вдоль X:
     .slice-offset-along-y = SLICE  смещение вдоль Y:
-    .slice-offset-along-z = SLICE  Смещение вдоль Z:
+   .slice-offset-along-z = SLICE  Смещение вдоль Z:
+    .slice-select-targets = SLICE  Select solids or surfaces to slice, then press Enter:
+    .slice-first-point-or-method = SLICE  Specify first point on slicing plane or [planar Object/Surface/Zaxis/View/XY/YZ/ZX/3points] <3points>:
+    .slice-first-plane-point = SLICE  Specify first point on slicing plane:
+    .slice-second-plane-point = SLICE  Specify second point on slicing plane:
+    .slice-third-plane-point = SLICE  Specify third point on slicing plane:
+    .slice-point-on-plane = SLICE  Specify a point on the slicing plane:
+    .slice-point-on-normal-axis = SLICE  Specify a point on the plane's normal axis:
+    .slice-point-on-view-plane = SLICE  Specify a point on the current view plane:
+    .slice-point-on-ucs-plane = SLICE  Specify a point on the current UCS plane:
+    .slice-select-planar-object = SLICE  Select a planar curve object:
+    .slice-select-planar-surface = SLICE  Select a planar surface:
+    .slice-select-cutting-surface = SLICE  Select a cutting surface:
+    .slice-select-side-or-both = SLICE  Specify a point on the desired side or [Both] <Both>:
+    .slice-select-object-or-both = SLICE  Select a sliced object to keep or [Both] <Both>:
+    .slice-surface-not-planar = SLICE  The selected surface is not planar. Select a planar surface:
+    .slice-surface-not-supported = SLICE  The selected surface does not define one supported cutting sheet. Select another surface:
+    .slice-object-not-planar = SLICE  The selected object does not define a plane. Select a planar curve object:
+    .slice-planar-object = planar Object
+    .slice-zaxis = Zaxis
+    .slice-three-points = 3points
     .solid-specify-first-point = SOLID Укажите первую точку:
     .solid-specify-fourth-point = SOLID Укажите четвертую точку:
     .solid-specify-second-point = SOLID Укажите вторую точку:
@@ -3186,7 +3219,18 @@ model =
     .cylinder-specify-second-point-for-height = CYLINDER  { common.specify }: { common.height } · { model.second-point }:
     .cylinder-specify-axis-endpoint = CYLINDER  { common.specify }: { draw.axis-endpoint }:
     .elliptical = Эллиптический
-    .select-a-solid-edge = { draw.select }: { properties.solid } · { common.edge }:
+   .select-a-solid-edge = { draw.select }: { properties.solid } · { common.edge }:
+    .filletedge-select-edge-or-chain-loop-radius = Select an edge or [Chain/Loop/Radius]:
+    .filletedge-select-edge-chain-or-edge-radius = Select an edge chain or [Edge/Radius]:
+    .filletedge-select-loop-edge-or-edge-chain-radius = Select edge of loop or [Edge/Chain/Radius]:
+    .filletedge-enter-option-accept-next = Enter an option [Accept/Next] <Accept>:
+    .filletedge-accept-or-radius = Press Enter to accept the fillet or [Radius]:
+    .filletedge-enter-radius-or-expression = Enter fillet radius or [Expression] <__ocs_fmt_0__>:
+    .filletedge-specify-radius-or-expression = Specify Radius or [Expression] <__ocs_fmt_0__>:
+    .filletedge-enter-expression = Enter expression:
+    .filletedge-stale-edge = A selected edge no longer belongs to the solid.
+    .filletedge-history-create-failed = The solid history could not be created.
+    .filletedge-history-append-failed = The fillet history could not be recorded.
     .specify-fillet-radius = { common.specify }: { common.fillet } · { common.radius } <__ocs_fmt_0__>:
     .specify-chamfer-distance = { common.specify }: { common.chamfer } · { common.distance } <__ocs_fmt_0__>:
     .polysolid-height-width-justification = POLYSOLID  { common.height } = __ocs_fmt_0__, { common.width } = __ocs_fmt_1__, { ui.justification } = __ocs_fmt_2__