The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Keep Layout output on the selected physical sheet and preserve hatch lineweights and plot styles through paper, viewport, and nested block paths.\n\nRefs #607
Use the same area pipeline as model space while keeping Layout bound to the physical sheet and printable margins. Share scale, rotation, clipping, and viewport fills across preview, PDF, and printer output.
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Paper content viewports with a circle / spline / ellipse clip boundary
drew their model content to the full bounding rectangle instead of the
shape. Each paper content viewport is its own render into its own screen
rectangle, so clipping is done per viewport: the boundary polygon is
projected into that viewport's render-target NDC (paper shape mapped
through the same visible-sub-rect crop as the content, so it stays fixed
to the viewport frame) and stamped into the stencil buffer with an
even-odd Invert, which marks the interior of any shape, convex or not,
without triangulation. Every content pass then draws only where the
stencil is set, so hatch, wire, mesh, 3DFACE, text, image, wipeout and
selection are all clipped uniformly.
Because Invert turns the cleared 0x00 into 0xFF, clipped content draws
with stencil reference 0xFF (unclipped content keeps reference 0). The
shared depth buffer moves to Depth24PlusStencil8 across every pipeline.
Rectangular viewports keep clipping via their own render rectangle and
XCLIP keeps its existing CPU wire clip; neither needs the stencil path.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Review follow-ups to #390, which fixed PDF/print text for model space but
left the layout-plot path — the one issue #385 was filed from — broken.
viewport_content_wires rewrote points/snap_pts/key_vertices/aabb and then
cloned text_verts through untouched, so paper-space viewport text stayed at
model (UTM) coordinates: a dimension at model (25000, 12000) plotted its
lines onto the sheet and its glyphs kilometres off the page. A text-only
wire fared worse — TEXT/MTEXT carry no stroke points since text went
SDF-only, so it was dropped outright by the empty-clip and AABB rejections.
Project the glyphs through the same proj_abs the snap points use (via the
existing map_text_verts helper), cull per glyph on the quad centroid, count
them towards the paper AABB, and dim them like the wire colour.
Also in emit_text, which diverged from the wire pass it mirrors:
- divide the pen by `scale`, or a Fit/windowed plot prints text as
near-invisible hairlines while its own lines stay correct;
- apply the CTB plot style, or a monochrome.ctb plot renders the lines
black and leaves the text on its screen colour;
- reset the dash pattern, which is persistent PDF state the wire pass
leaves set — a HIDDEN-linetype last wire printed glyph outlines dashed.
export_table's doc claimed it honoured TEXTFILL and widened the bold pen
itself; it did neither. Gate fill_tris on textfill() so hollow-on-screen
text exports hollow, carry the bold flag and widen the pen by the 1.7x the
bake uses, and resolve Face once per family instead of once per glyph (the
atlas mutex is held for that whole walk).
uv_key identifies a glyph by its tile's uv_min, but grow_height rescales
every entry's V and reset rewinds the packer, leaving already-built quads
addressing the wrong tile — garbage on screen and a silent miss in the
export table, i.e. #385 again under #347's grow-the-atlas conditions. Bump
an atlas generation on both and fold it into the tessellation memo guard so
the text re-lays-out instead. Quads built earlier in the same pass that
grows are still stale for that pass; the guard heals them on the next one.
Tests: the integration test's "some wire has text_verts" assert passed on
pre-fix code too (the exporter ignored them; the scene always carried
them), and its dimension half was satisfied by the TEXT alone — assert per
entity handle instead, and stop colliding on fixed names in the shared temp
root. The unit test's bbox came from the same quads the mapping reads, so
it held by construction; pin the run's own world box instead. That still
cannot catch a mirrored corner assignment — verified by mirroring it — so
say so rather than claim coverage the assert doesn't have.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Break up the four giant files (~29k lines total) into focused submodule
directories, one concern per file. Pure mechanical moves — behavior is
unchanged.
- app/update.rs (9650) -> app/update/{mod,viewport,command,style,file,
dynamic,dialog,util}. The 384-arm update_inner match stays in mod.rs
with thin delegating arms; the 66 fattest arm bodies move to topic
methods. Arm set preserved exactly (384 -> 384).
- scene/mod.rs (9017) -> scene/{mod,entity,tess,hittest,layout,paper,
mspace,project,selection,modify,group_layer,preview}. The impl Scene
body is split across files via inherent-impl-per-file; struct, ctor,
fields and load-time helpers stay in the root. fn count 123 -> 123.
- app/commands.rs (6082) -> app/commands/* grouped by command family.
The 233-arm dispatch match becomes source-ordered per-family
dispatch_* handlers, preserving first-match precedence (233 -> 233).
- app/view.rs (4686) -> app/view/{mod,overlay,modal,viewcube,controls}.
Largest file drops from 9650 to 3343. Builds clean; app launches and
loads plugins with no panic.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
gianlucafiore