StyleKey::TableStyle only updated the ribbon mirror, so inserts kept using the header value and resync re-seeded from the mirror. The arm now writes current_table_style_name plus dirty when the style exists, and sync_ribbon_styles seeds from the document like Text/Dim. Tests: tablestyle_ribbon_pick_writes_header_and_dirties plus pick_flows_into_table_insert covering pick-to-dialog (both RED first). Full suite: 1996 passed / 0 failed / 25 ignored.
The Properties palette reads the layer names when it is built, and a
layer rename only refreshed the layer panel and the ribbon, so the
palette's layer list kept the old name beside the new one. The layer
panel refresh now rebuilds the palette whenever the set of layer names
changed: rename, new, delete and purge all pass through it. A layer
toggle that leaves the names alone does not rebuild it, as the rebuild is
costly for a large selection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
ensure_layer had started trimming the name, so an entity on " A" got a
table entry "A" it never resolves to. Register the name as given again
and drop the unused return value. The five copies of the dirty-flag check
become sync_registered_layers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Point & line and 2Lines take a text baseline or an ellipse axis as the
line; a zero value folds the points onto the first one; 2Lines turns the
second line about its start. The Properties Constraint section edits
Constraint Form (Dynamic on the *ADSK_CONSTRAINTS layer, Annotational on
the current layer), Reference (driven constraint in parentheses whose
parameter follows the measurement) and Description (stored with the
parameter and the native variable). Dynamic dimensions keep a 12 px text
and 8 px arrows at any zoom, drop trailing zeros and show formulas as
`fx: len=d1*2`; the hidden constraints layer stays out of the layer lists.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Relocate three root-level modules into io/, where they belong by concern:
- update_check.rs -> io/update_check.rs (its own doc-comment notes it
mirrors how crate::io wraps blocking calls in async).
- patterns.rs, linetypes.rs -> io/ (standard resource catalogs parsed
from asset files and populated into the document — IO-shaped work).
Fix the moved files' include_str! paths (one level deeper), add the
mod declarations to io/mod.rs, drop them from lib.rs/main.rs, and
re-point all crate:: references to crate::io::. No behavior change.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Annotate style dropdowns (text / dimension / multileader / table) and
the layer dropdown were hard-coded to "Standard" / "0" and never synced
from the opened document, so they showed placeholder values even with no
file open and stale values after closing one.
- Start the ribbon's style and layer lists empty instead of with a
placeholder entry.
- Sync the style dropdowns from the document on file open and on tab
new/switch/close (the layer sync already ran there).
- Guard sync_ribbon_layers / sync_ribbon_styles / sync_ribbon_from_selection
for the Start (welcome) tab so all three dropdowns stay empty there.
- When a style family is absent (e.g. no table/multileader styles), fall
back to empty rather than a non-existent "Standard".
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Bump acadrust to pick up the new $CTABLESTYLE / $CMLEADERSTYLE header
variables, then on load seed the ribbon's active table style and the
tab's active multileader style from the document header so the ✓ marks
the style the file actually declares (DXF). Set Current writes the header
field as the round-trip source of truth, and the style-manager staging
snapshot now covers it. sync_ribbon_styles honours the active table style
instead of always falling back to the first one.
DWG still leaves these at "Standard" until acadrust parses them from the
binary header.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
LAYOFF / LAYFRZ / LAYLCK / LAYON / LAYTHW / LAYULK / LAYISO /
LAYUNISO mutated the document's layer table (\`turn_off\` /
\`freeze\` / \`lock\` / …) and then called \`sync_ribbon_layers\`,
which feeds the ribbon dropdown from \`self.tabs[i].layers.layers\`
— the \`LayerPanel\` cache. That cache was never refreshed from
the document for these commands, so the dropdown stayed wrong and
the Layers Properties Manager kept showing the old visibility /
lock / freeze icons.
Add \`OpenCADStudio::refresh_layer_panel\` that runs
\`LayerPanel::sync_with_viewports\` from the live document before
calling \`sync_ribbon_layers\`. Replace every direct
\`sync_ribbon_layers\` in \`commands.rs\` (all of them sit inside
LAY* arms) with the new helper.
Closes#39
Joining the OpenAEC Foundation (open-aec.com). Crate/struct become
OpenCADStudio, user-facing strings use the spaced "Open CAD Studio"
form, repo URLs point to HakanSeven12/open-cad-studio. Logo (window
icon + assets/logo.svg) redrawn with OCS initials. Drop examples/
binaries — unused.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
New StyleComboGroup RibbonItem renders a dropdown combobox for selecting
text style, dimension style, multileader style, or table style. Ribbon
groups in the Annotate tab now match the reference layout: each group
has a large tool on the left and a style combobox with tool rows on the
right.
Each combobox shows the active style name, opens a scrollable item list
on click, and has an optional "Manage…" row that fires the style manager
command (STYLE / DIMSTYLE / MLEADERSTYLE / TABLESTYLE).
Style state is synced from the document on every layer refresh via
sync_ribbon_styles(). RibbonStyleChanged message propagates selections
back to the acadrust document header and the active_mleader_style field.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Karim Jerbi