StyleKey::TableStyle only updated the ribbon mirror, so inserts kept using the header value and resync re-seeded from the mirror. The arm now writes current_table_style_name plus dirty when the style exists, and sync_ribbon_styles seeds from the document like Text/Dim. Tests: tablestyle_ribbon_pick_writes_header_and_dirties plus pick_flows_into_table_insert covering pick-to-dialog (both RED first). Full suite: 1996 passed / 0 failed / 25 ignored.
- Auto-hide is a setting of the left / right edge rather than of each
pallet: the pin on any docked pallet turns it on for its whole edge,
which then shows only its icon strip until an icon is hovered. A
floating pallet keeps its own auto-hide.
- Hovering the strip icons only shows a group while the edge auto-hides;
otherwise groups switch on click.
- The + menu checks only the pallets open on that edge. Picking one that
is open elsewhere (the other edge, floating) moves it to this edge;
unchecking a checked one hides it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A group is now a set of pallets shown together, stacked top to bottom,
and an edge shows one group at a time. The icon strip lists every group
(grip bar over its pallets' icons, the shown group on a grey
background); clicking any icon of a group shows that whole group.
- Dropping a pallet on the top / bottom half of a pallet in the shown
group stacks it above / below; dropping on the strip's icons places it
in that group at that spot, and on a grip or below the last group
starts a new group (which is then shown).
- Splitters set the heights of the pallets within a group; double-click
makes them equal again.
- Each group keeps its own width; the divider sizes only the group it
belongs to, and switching groups switches width.
- A group whose pallets all auto-hide shows only while hovered.
- Layouts saved by older builds load with their stacked pallets as one
group.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Each dock edge now has a vertical icon strip along the window edge in
place of the horizontal tab row and the auto-hide rail.
- Every shown group gets a grip bar with its pallets' icons below it;
the shown pallet's icon has a grey background. Clicking an icon shows
that pallet in its group; hovering the icons of an auto-hiding group
opens it.
- Dragging an icon within the strip reorders it or moves it into
another group; dropping it on a grip or below the last group makes it
a new group there. On the pallet area, the top / bottom bands still
start a new group above / below and the middle joins the group.
- Dragging a grip moves the whole group to another position or edge.
- A + button under the groups opens the pallet menu (icon, name, check
mark). Opening a pallet from it docks it on that edge as a new group,
or in its existing group there; a checked pallet is hidden.
- Groups keep their width when moved; the divider against the viewport
sizes the whole edge column.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- The tab row shows only when at least two pallets share a slot.
- Tab icons are larger (18 px). The shown tab gets the grey background
without a border; other tabs have no background.
- The pallet menu was drawn by a dropdown that squeezed it to one icon
wide. It is now its own overlay hanging under the menu button, laid
out like the right-click menu: pallet icon, name, and a check mark on
the right for the pallets shown in this slot. Any click outside closes
it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- LAYERS opens the Layer Manager as a dockable pallet instead of a modal
dialog with a darkened backdrop. It floats over the middle of the
drawing the first time and keeps its place after that; LAYERS again
(or its close button) hides it. The table keeps its natural width and
scrolls sideways when the pallet is narrower, and the Name column
divider now drags through the dock's pointer capture. Ctrl+A selects
all layers while a layer row is selected in the open pallet.
- The Layer Manager is listed in the tab-row pallet menu like the others.
- Double-clicking a docked title bar floats the panel beside its edge;
double-clicking a floating title bar docks the panel on the side its
title bar faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Dropping on a docked pallet now stacks it above or below over the top
and bottom 35 % of the slot; only the middle 30 % makes it a tab.
- Tabs show the pallet icon (title as tooltip), aligned to the left.
Every docked slot has the tab row, so its menu is always reachable.
- A menu button at the right of the tab row lists every pallet with a
check mark for those shown in this slot. Checking one opens it as a
tab here (moving it from wherever it was docked); unchecking hides it
and keeps its tab for next time.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Dragging a tab along its slot's tab strip moves it to the gap under the
pointer; the drop preview shows the new tab order. A panel dragged from
elsewhere onto a tab strip lands at that position too. A drop in the
middle of the slot still appends a newcomer and leaves a member where
it is.
- All tabs of a slot share one width: a joining panel takes the slot's
width, resizing or resetting one tab sizes them all, and slots sized
apart by older configs render at their widest tab. Switching tabs no
longer changes the column width.
- Hovering an auto-hide rail raises its slot without turning the rail
blue.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Docked title bars show the pin and close only while the pointer is
over the bar; the bar keeps a fixed height so nothing jumps.
- Auto-hide on is drawn as a 30° tilted pin (new pin_active.svg)
instead of a coloured button background, on docked and floating bars.
- A floating panel's resize grip sits in the bottom corner away from its
title bar. With the bar on the right it is bottom-left (new mirrored
resize_left.svg) and resizing from there keeps the right edge fixed.
The bar stays on its side while resizing.
- While a floating panel is dragged, only the drop preview shows it; the
panel no longer stays drawn at its old place.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Every docked panel now shows its title bar flush along the top, like the
Properties panel: dock::frame takes the title bar separately and pads
only the content below it.
A floating panel drops its horizontal title bar for a vertical one on
the side facing the nearer workspace edge. Close and the auto-hide pin
sit at the top; the panel's icon sits at the bottom with the title
reading upward above it. The free part of the bar drags the panel. With
auto-hide on, a floating panel shrinks to its title bar until hovered.
Panel views take a dock::Chrome (auto-collapse plus floating) in place
of the bare auto-collapse flag, so the shared title bar knows when to
step aside.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Island cuts stay inside the face; MASSPROP falls back to a coarser mesh
when the finest leaves a face untriangulated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Pins: codec 8189f83, kernel a82f17d, graph d3558bb (all manifests and
the python plugin lock).
- MASSPROP reports volume, centroid, inertia, products, radii of
gyration and principal moments of 3D solids and bodies from their
B-rep (exact where analytic, else from a fine mesh).
- OFFSET of ellipses and splines through the kernel's curve offset.
- FILLET between circles, ellipses and splines through the kernel's
curve-curve fillet, trimming arcs and open splines to the tangents.
The kernel bump brings the DWG ACIS audit fixes: slices, booleans and
press/pull on cones, slanted cylinder sections, survey coordinates,
spline walls and touching parts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Panels can now float over the workspace, share a docked slot as tabs,
and split an edge at heights the user picks.
- Dropping a panel away from the edges floats it at the pointer. Floating
panels move by their title bar, resize from a corner grip, and come to
the front when clicked.
- Dropping in the top or bottom quarter of a docked slot docks the panel
above or below it, as before. Dropping in the middle adds the panel as
a tab of that slot. Pressing a tab shows that panel; dragging a tab
pulls the panel out again.
- While dragging, a blue ghost previews the result: the new slot, the
slot with its future tab row, or the floating window.
- A splitter between stacked slots sets their heights; double-click it
to make the slots equal again. Heights persist.
- A press only becomes a drag after 5 px of movement, so clicking a title
bar or tab never moves the panel.
The persisted layout now stores each edge as tab groups with a height
weight, plus a list of floating panels. Configs with the old
bare-panel-id stacks still load as single-panel slots.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- refresh_associative_sweeps runs on every edit and scanned the xdata of
every entity; it now returns at once when no associative swept surface
exists (its application is not registered) and looks at surfaces only.
- An arc's end angle was raised by TAU in a loop, which never ends on a
huge angle from a damaged file; the sweep is taken with rem_euclid.
- The sweep DELOBJ test expected surface sweeps to delete their sources,
which #1663 changed on purpose: an associative surface keeps them.
- codec c9ffcac (opencadcodec #103) adds an explicit viewport-off bit: the
viewport on state is read with is_on() and set with turn_on()/turn_off()
everywhere, so a viewport the file marks off shows off and can be turned
back on from Properties.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
SWEEP: base point from the path; kernel sweep validity fixes
The fork pin the PR carried ([patch] to ramox81/cadkernel 30b3810) is
resolved to upstream instead: kernel 99b6b48 (opencadkernel #78-#83),
codec c9ffcac (opencadcodec #102, #103), graph 7f6aae7, in every manifest.
The Properties palette reads the layer names when it is built, and a
layer rename only refreshed the layer panel and the ribbon, so the
palette's layer list kept the old name beside the new one. The layer
panel refresh now rebuilds the palette whenever the set of layer names
changed: rename, new, delete and purge all pass through it. A layer
toggle that leaves the names alone does not rebuild it, as the rebuild is
costly for a large selection.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Idle and object selection drew the same cursor, crosshair arms with the
pickbox, so the cursor did not tell a pick from a free move. While a
command gathers a selection or waits for an object pick the arms now go
and the pickbox stays: idle keeps arms and box, point input arms and dot.
Fixes#1661
Co-Authored-By: Claude Opus 5.5 <[email protected]>
On a non-Retina screen macOS draws the interface at 1x, which reads small
on a Full HD monitor, and there was no way to enlarge it. Options >
Display now offers an interface scale of 75–200 % in 25 % steps, applied
through the window's scale factor on top of the display's own and kept
with the user settings. It is a list rather than a slider because the
dialog rescales under the pointer as the value changes.
Fixes#1655
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PURGE repeats until a pass removes nothing. A drawing whose complex
linetypes use shape files carries unnamed STYLE records for them; the
table holds those under keys the empty name does not reach, so every pass
listed them again and removed nothing, and the loop never ended.
- Unnamed and shape-file styles, and styles a complex linetype reaches by
handle, are never listed for purging.
- In-use checks compare names case-insensitively, as the tables do, so a
layer, style or linetype referenced as WALL is not purged as Wall.
- Counts are what the tables actually removed, and a pass that removes
nothing ends the loop.
Fixes#1662
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Swept surfaces made with SURFACEASSOCIATIVITY on keep their profile and
path and are written as a swept-surface action of the drawing's
associative network, reading the profile and path and their scale and
twist expressions. They follow edits of their sources.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Add Section 19 benchmarks covering camera pan viewport uniform updates,
spatial hover candidate search, and viewport data assembly scaling
- Add navigation telemetry probes in src/perf.rs (active only when
PERF=1) to track frame interval, batched input moves, and layout-draw gap
underlay_resolution_stale() was requesting continuous redraw frames at
display refresh rate even when no raster underlays were present in the
drawing. Cache has_underlays conservatively on Scene and early-return
false when no underlays exist, eliminating the idle tick leak.
A single profile's base point comes from the path it is swept along: a
path leaving the profile's plane from inside the profile sweeps it where
it stands. Kernel 30b3810: pcurves in the edge's parameterisation (valid
spline-faced sweeps), corner crossings fitted to the modeller's
resolution, run faces through stations evenly spaced along the run.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Language gains lo-LA, labelled ລາວ in every catalog, so the new
translation can be chosen.
- Two Lao keys under stale names now use the catalog's names, and the
touchpad option added since gets its Lao label.
- The web build gets a Lao font (Noto Sans Lao, generated like Thai) and
routes Lao and Thai drawing text to their fonts; Thai had a font but
was never routed to it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Outside macOS a touchpad's two-finger drag arrives as wheel scrolls that
nothing tells from a wheel. A new option (Options, off by default) makes
every scroll pan and Ctrl+scroll — what a pinch sends there — zoom.
Fixes#1560
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DWG layout owners and the overall paper-space viewport read back as
written (opencadcodec#78, opencadcodec#80).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
select takes window [x1, y1, x2, y2] in world XY, with crossing to also
take what the box crosses. It runs the viewport's own box test, now one
helper (box_selection_handles) that the drag and click-move-click
gestures share; the drag gesture applies the selection filter as the
click one already did.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The closed combo is at least 250 px wide (about 25 characters of name)
and its dropdown 300 px.
Fixes#1648
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The text was placed by its alignment rather than its attachment point,
so text on the left of the landing ran over the leader. It now attaches
by the attachment point, and putting the text on a side (on creation or
by a grip) turns left- or right-justified text to read away from the
leader.
Fixes#1646
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Circle and ellipse shaders scaled the pattern length by the linetype
scale (PSLTSCALE in a viewport, annotation scale in model) but not the
dash and gap elements, so a dashed arc broke into dots.
Fixes#1644
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The paste kernel added every entity to model space. It now takes the
space a new entity goes to: the block being edited, a layout's paper
space when no viewport is active, or model space.
Fixes#1652
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Karim Jerbi