Multiple now follows the reference flow: every pick after the first is
made equal right away under `Select object to make equal to first:` and
Enter ends the command with `Length of objects made equal` (or `Radius
…`). A typed coordinate at one of the command's object prompts picks the
object under that point instead of being refused as a point.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Equal was applied through a generic gather-then-apply flow and, with the
default size-retaining solve mode, never changed anything: the solver
held both sizes and the relation could not be met. Now:
- GCEQUAL joins ECONSTRAINT and GEOMCONSTRAINT Equal; both objects are
picked inside the command (`Select first object or [Multiple]:`,
`Select second object:`; Multiple gathers `Select objects to make equal
to the first:`), a selection made beforehand is not used, a miss says
`No object found.` and re-asks, an unsupported object or the same object
twice is reported and re-asked, a repeat is refused.
- The follower is resized in place before the relation is added: a line or
straight polyline segment keeps its start and direction and its end
moves to the first object's length; a circle or arc keeps its center and
takes the radius.
- During edits the side that is not being edited follows the same rule:
its size is not retained, its start (or center) and other vertices are
held and its direction kept, so only its length or radius changes; a
chain of Equal relations follows along.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
The first empty-space click of the 2Points flow was only resolved against
the document together with the second one, so "No valid constraint point
found." appeared one pick late. The command now hands the first pick to
the host (`CmdResult::CheckHorizontalPoint`), which resolves it right away:
a miss reports and re-asks for the first point, a hit moves on to the
second point.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
Follow-up to #1341:
- interactive UCS offers Face / OBject; bare UCS OBJECT starts an entity pick
- one UcsPickCommand serves both FACE and OBJECT
- ucs_from_normal calls the existing arbitrary-axis helper instead of a copy
- prompt catalogue key and en-US text follow the new option list
Co-Authored-By: Claude Fable 5.1 <[email protected]>
1) VCONSTRAINT (and the new GCVERTICAL name) uses the axis constraint flow:
"Select an object or [2Points] <2Points>:", 2Points mode with the
reference's re-prompts and messages, and the same object types as
Horizontal — line, polyline segment, text, MText, ellipse axis.
2) Object mode turns the object about its first vertex; a two-point relation
across two objects slides the second object rigidly onto the axis.
3) Re-applying an axis constraint reports that the constraint already
exists; Vertical follows the UCS Y direction.
4) The constraint bar draws Vertical as the reference's axis mark, with the
point marker for a two-point relation.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
1) FXCONSTRAINT (and the new GCFIX name) prompts "Select point or [Object]
<Object>:" — a pick fixes that constraint point; Enter or O asks for one
line, polyline segment, circle, arc, ellipse or spline; misses and
unsupported objects report the reference messages and re-prompt.
2) Point, block, text, MText, attribute and table insertion points are
addressable constraint points.
3) Re-applying Fixed to the same point or object reports that the constraint
already exists instead of adding a duplicate.
4) A persistent Fixed holds its pre-edit geometry through MOVE, ROTATE,
SCALE, STRETCH, grip and Properties edits: fixed points stay, free points
of a partly fixed entity follow the edit, and size retention skips fixed
entities.
5) Object mode on a polyline fixes the picked segment (natively persisted)
instead of the whole polyline; arc segments pin endpoints, center and
radius.
6) Ribbon label "Fix" with a padlock icon.
Co-Authored-By: Claude Fable 5.1 <[email protected]>
- ARRAYRECT, ARRAYPOLAR, ARRAYPATH, ARRAY3D and COPY Array reject item
counts above 100,000 (checked as a product of every dimension) and keep
the prompt open. Unbounded counts allocated one transform per item and
aborted on allocation failure. Stored defaults are clamped as well.
- EXPLODE leaves a MINSERT above the same limit intact instead of
materializing every cell.
- Typed lengths and angles reject non-finite values and magnitudes above
1e15; SCALE rejects a non-finite factor.
- Zero-radius FILLET compares candidate intersections with total_cmp and
rejects non-finite results; partial_cmp().unwrap() panicked on NaN.
- SOLID falls back to a minimal kernel tolerance when its corners' extent
overflows, since Tolerance::new panics on infinity.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Right-to-left line reordering walked each atom's byte range and sliced the
line at every byte, panicking when a neutral multi-byte character such as a
guillemet preceded the first strong character. Walk characters instead.
FIND/FINDALL located the REPLACE keyword in a Unicode-uppercased copy and
sliced the original with that offset; uppercasing can change byte length
(dotless i, ligatures). Uppercase ASCII only, which keeps offsets aligned.
FILLET and CHAMFER inline R/D shorthands now test the original text before
slicing past the first character.
Co-Authored-By: Claude Opus 5 (1M context) <[email protected]>
Comments and the Options help text describe the behaviour of commercial
solutions without naming any product. The command menu puts the command's
keywords directly under Enter / Cancel, with Recent Input and Snap
Overrides below them, so the choices that change from step to step are the
closest to the pointer.
Co-Authored-By: Claude Opus 5 <[email protected]>
The command menu now follows the commercial solutions' layout row for row: Enter, Cancel,
Recent Input ▸, the command's keywords, Snap Overrides ▸ (every object snap
with its glyph, Mid Between 2 Points, None, Osnap Settings…), then Pan and
Zoom. Pan / Zoom run transparently while a command is active ('PAN,
'ZOOM …): navigation modes leave the command untouched and an interactive
ZOOM Window parks it and resumes it afterwards. Rows carry an icon gutter
so labels align; the Enter row shows a default value ("<0.5000>") as its
hint instead of a second finish row.
ARC gets the commercial solutions' prompt flow with all keywords: start [Center], second
point [Center/End], end; after Center: end [Angle/chord Length]; after
End: center [Angle/Direction/Radius]; Enter continues tangent. The
previous default (Center/Start/End with method codes) stays as ARC_CSE.
Object snaps gain a one-shot "None" override. New strings in all locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
Every new UI string (menu rows, Options → Right-click Customization, the
PLINE sub-prompts and keyword labels, MOVE/COPY/OFFSET prompts) gets its
Fluent attribute in all 21 locales plus the source → attribute rows in
locale_catalog.rs; the SETVAR help line lists SHORTCUTMENU and
SHORTCUTMENUDURATION. Tests that compared prompt text now check command
state so they pass under any UI language.
Co-Authored-By: Claude Opus 5 <[email protected]>
MOVE: Displacement, Enter at the second point uses the base as the vector.
COPY: Displacement, mOde (Single/Multiple), Undo of the last copy.
FILLET: Undo of the last fillet (the command refreshes its entity cache
through the new CadCommand::on_document_undone hook after the host undoes
the document step). CHAMFER: Multiple and Undo. OFFSET: Erase (the offset
replaces its source), Layer (Current/Source), Undo, Exit.
POLY3D, TRACE, MIRROR and MEASUREGEOM expose the keywords they already
accepted as options, so the context menu and option buttons list them.
The pinned prompt now keeps informational bracket groups such as
"[3 objects]" and only drops real option listings when the buttons take over.
Co-Authored-By: Claude Opus 5 <[email protected]>
PLINE now offers the commercial solutions' full option set: Arc/Close/Halfwidth/Length/
Undo/Width in line mode and Angle/CEnter/CLose/Direction/Halfwidth/Line/
Radius/Second pt/Undo/Width in arc mode, including the nested prompts
(Angle → CEnter/Radius, CEnter → Angle/Length, Radius → Angle → chord
direction). Widths land in the LwPolyline vertices (start/end per segment,
the end width carrying into the next segment) and PLINEWID persists per
session. Undo / Escape inside a sub-prompt only back out of it; every
sub-step previews its arc at the cursor.
Co-Authored-By: Claude Opus 5 <[email protected]>
The viewport context menu is now built from a pure model
(ui::popup::context_menu) rendered by the overlay: while a command runs it
offers Enter / Cancel / every keyword of the command's options() with the
keyword shown as a hint, a Recent Input submenu and M2P; when idle it offers
Repeat, Recent Input, Clipboard, Undo/Redo with history labels, the edit
block (Erase/Move/Copy/Scale/Rotate/Mirror/Draw Order), Isolate, Pan/Zoom,
selection tools, Properties and Options. The default row is anchored under
the pointer and the menu is keyboard-navigable (arrows, Enter, mnemonic
letters; any other key closes it and types into the command line).
Right-click behaviour is a user preference (Options → User Preferences,
SHORTCUTMENU / SHORTCUTMENUDURATION): shortcut menu (commercial solutions default),
time-sensitive, or the previous Enter-first cycle.
LINE gains options() (Close/Undo/eXit).
Co-Authored-By: Claude Opus 5 <[email protected]>
ExtrudeCommand never opted into dyn_commit_as_text(), so a typed
Enter fell through to generic point-resolution instead of
on_text_input, producing a near-zero height that silently failed
to commit. Mirror PresspullCommand's pattern, gated to the Height
step.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Show the styled dimension and its value while placing a dimension, using
the same builder the command commits with. Each creation command
(DIMLINEAR, DIMALIGNED, DIMANGULAR, DIMRADIUS, DIMDIAMETER, DIMARC,
DIMJOGGED, DIMORDINATE, DIMCONTINUE, DIMBASELINE, QDIM) reports the
dimensions it would commit at the current stage through
`CadCommand::dimension_preview`. The application applies the current
creation style, or the base dimension's style for DIMCONTINUEMODE=1,
and the same viewport measurement scale as commit, then tessellates the
transient entity through the normal dimension renderer.
While the second definition point is being acquired, a hovered model
snap supplies a provisional viewport scale; once both points are fixed,
hovering another viewport does not change the value. Angular dimensions
never receive length compensation. Degenerate geometry, an invalid
scale, or conflicting viewports fall back to the plain rubber-band
preview so no misleading value is shown.
Hakan Seven