Sync current main and companion codec changes before preserving unsupported frame rows, rendering in the entity plane, and sharing final layout metrics with placement preview.
INSERT enumerated all block names in a single prompt string, causing unbounded overlay growth and full-screen occlusion in drawings with many blocks. Replace prompt enumeration with a ranked, incrementally filtered suggestion model: BlockPicker maintains precomputed lower/upper caches and usage ranks (MRU/frequency), filters via O(n) substring scan and partial sorting (select_nth_unstable) to O(k), bounded to CLIPROMPTLINES.
Introduce CLIPROMPTLINES (Integer 0-50, Registry, default 3) for the number of temporary prompt lines above the command window; persist in UserSettings, expose via SETVAR and direct entry, enforce in CommandLine::view. Suggestion count is in direct relation to CLIPROMPTLINES (limit = clip, capped to 50).
Make search live without requiring Enter: add CadCommand::on_live_input, implement for INSERT/MINSERT via picker.set_needle, and wire to command-line input paths (Message::CommandInput, on_command_append_char, on_command_backspace). Updates use upper/lower caches and partial sort for <0.2ms per keystroke on 10k blocks, with debounced block-usage persistence (MRU cap 20, freq cap 200) to avoid I/O thrash. Correct tri_count test helper to use display_from_solid.
Persist camera, render state, and solid fallback geometry across saves. Generate previews from a clean live viewport and refresh recent-file thumbnails immediately.
Affected Chromium adapters fail after selecting WebGPU even when packed renderer paths are forced. Use WebGL2 for the web app and let device limits select renderer tiers.\n\nRefs #788
The MText editor paints its own caret and is not a focusable widget, so
the command input keeps widget focus behind the dialog. It captures the
arrow itself, which routes the key through CommandLineArrowProbe instead
of ArrowKeyPressed — and that path only asked whether the command input
was focused, never whether an editor was open. Up and Down therefore
walked command history while the user was typing in MText.
Give the probe the same rule ArrowKeyPressed already applies: while the
editor is open the arrow moves its caret. The probe now carries the shift
state so a held Shift still extends the selection on this path.
Fixes#655
Clicking an editable property value field now selects its entire value instead
of only placing the caret, so typing immediately replaces it. The click is
observed through a global left-press subscription (PropPointerPressed); a focus
sweep reports which widget took focus and PropSyncActive maps it back to the
active property row, then issues a select-all operation only when focus landed
on a different field.
The active row stays highlighted while its text input holds keyboard focus and
clears when focus moves elsewhere.
The status-bar units button wrote INSUNITS, which nothing on screen reads.
INSUNITS only tells the drawing how to scale content arriving from
elsewhere, so picking a unit relabelled the drawing and changed nothing
visible — the selector looked broken because the variable it moved was
invisible.
Point the button at LUNITS instead, the setting that decides how every
coordinate and distance is written, and give the three questions the word
"units" runs together a place each:
- The button offers the five length formats, each shown beside a sample of
itself, so Engineering and Architectural are told apart by sight.
- UNITS / DDUNITS opens a real dialog: length and angle format and
precision, the direction angle zero points, whether positive angles run
clockwise, and the insertion unit. Its sample comes from the same
formatters the drawing uses, so it cannot drift from the readout.
- DWGUNITS converts. Model geometry, viewport framing, the header's length
defaults and each dimension style's scale all move together in one undo
step; paper space is left alone, since the sheet is still the same sheet.
Locked layers are converted too — a half-converted drawing would be at
two scales at once.
The coordinate readout formatted at four decimal places whatever the
drawing asked for; it now goes through the same format_length the
properties panel uses. That made the angle formats reachable in turn, so
degrees-minutes-seconds now carries the d/'/" marks that say which
convention it is, and surveyor's units are written at all.
Typed input is still plain decimal: a length the readout writes as
5'-6 1/2" cannot yet be typed back. ANGBASE and ANGDIR are stored but not
yet applied to displayed directions.
Closes#668
Co-Authored-By: Claude Opus 5 <[email protected]>
Registering as the .dwg/.dxf handler was reachable only by typing
FILEASSOC, which is also the only thing that installs the icons the
desktop shows — so a user with no reason to know the command had no way
to arrive at either.
The checkbox makes the same two calls the command does, so the stored
setting and the actual registration cannot drift apart. A registration
the system refuses puts the checkbox back rather than leaving it showing
a state that is not true.
The line under it says the icons come with it, since that is what sends
people looking for this in the first place.
Co-Authored-By: Claude Opus 5 <[email protected]>
Two places still showed the old mark after the logo was redrawn.
The window icon was built by drawing the letterforms stroke by stroke in
code, background colour and all, which made it the one icon in the
application not coming from assets/logo.svg. It now rasterises that file,
fitted to the square without distorting whatever aspect the logo has. It
returns nothing when the logo cannot be rendered, so the window falls back
to the platform default instead of to something invented here -- which is
how it ended up stale in the first place.
The icon installed into the icon theme was only ever written from inside
the desktop-entry write, behind that write's own "nothing changed" early
return. The entry's text does not change when the logo does, so once it
had been written the icon was never refreshed again. The two change for
different reasons; the icon is now checked first and on its own terms. It
already compares bytes, so an unchanged logo still costs only a read.
Worth knowing on Wayland: the compositor ignores the window icon entirely
and takes the dock icon from the desktop entry, so there the installed
theme file is the only one that matters -- and it refreshes when the file
associations are next set up, not at launch.
Co-Authored-By: Claude Opus 5 <[email protected]>
Drawings arrive from elsewhere carrying someone else's layer names, and
folding them into a set of house layers meant renaming and merging by
hand, one layer at a time.
LAYTRANS reads a layer set out of another drawing and moves this one onto
it. Given a file it maps every name the two already share and translates
at once, which is all most incoming drawings need. Bare, it opens a
translator: the drawing's layers on one side, the loaded set on the
other, mappings built up between them and applied only on Translate, so a
mapping can be reconsidered and the whole translation is a single undo
step. Mappings can be saved and read back, objects can be forced to
ByLayer so the target layer's properties are what actually shows, and the
result can be written out as a log.
The move itself is the one LAYMRG already made for a single pair, so
LAYMRG now goes through it too rather than keeping its own copy.
Three things fell out for free or nearly so. A standards file is a
drawing, so .dws and .dwt need nothing but a place in the file filter.
The entity list is flat and holds block definitions, so objects inside
blocks travel with everything else instead of being stranded on a layer
that no longer exists. And a target layer that this drawing already has
is left alone: the drawing has an opinion about it, and restyling it
would reach past what was asked for -- only newly created targets take
the standard's properties.
Mappings are saved beside the drawing rather than inside a DWS. That is
where AutoCAD keeps them, but putting them there would mean inventing a
place in the drawing that nothing else reads back.
Closes#624
Co-Authored-By: Claude Opus 5 <[email protected]>
The ribbon offered four styles and dispatched each one's id as a command.
Two of those ids were not visual-style commands: "Shaded" carried SOLID,
which draws a 2D filled polygon, so choosing it started a draw command;
"Hidden" carried HIDDEN, which matched nothing at all, so it did nothing.
The intent had been for the button to fire its tool's event, but the
dropdown never reads one -- it dispatches the id.
Behind that sat two generations of the same feature. The render-mode
picker offered the seven styles a viewport can actually be drawn in;
everything else -- the ribbon, VSCURRENT, SHADEMODE, VISUALSTYLES and a
handful of bare verbs -- went through a binary wireframe-or-shaded flag
that could only approximate them, reporting "Hidden (shown shaded)" and
"X-Ray (shown as wireframe)" when asked for something it had no way to
draw. Four descriptions of one choice, each drifting on its own.
There is one list now. Each style names itself once -- mode, label, icon,
and the command that applies it -- and the ribbon, the picker, the
VISUALSTYLES verb and the interactive prompt all read from it, down to
the line that lists the choices, so what is offered cannot disagree with
what works. Keywords are the render modes' own names, since there is one
set of styles left to name.
The binary path is gone rather than kept alongside: its message, its
module event, the tool definitions that produced it, the ribbon's
special-cased highlight arms, the bare style verbs and the older keyword
spellings. X-Ray goes with it -- no render mode draws one, and it was
already coming out as a plain wireframe. Three files that had been left
holding a single icon constant each fold into the list.
Note: ModuleEvent::SetWireframe leaves the plugin API with it.
Closes#621
Co-Authored-By: Claude Opus 5 <[email protected]>
Only Previous and Last were on offer, so Window, Crossing, Fence, the two
polygons and All could not be reached at all -- and with no keyboard to
type them into, the buttons were the only way in.
Window and Crossing fix the sense of the next box. Dragging derives that
from the direction the corner travels and would overwrite it the moment
the corner moved, so the derivation stands down while a keyword holds it.
Add and Remove decide what a pick does for the rest of the round: Remove
subtracts the way Shift already does, rather than through PICKADD, which
decides whether a pick *replaces* the set and so would have wiped
everything gathered so far. Both are dropped when the next command
starts, since neither outlives the selection that asked for them.
Fence and the polygons are picked point by point, which TRIM and EXTEND
already ask for. That gesture -- the points, the rubber-banded dashed
preview, whether the path closes -- moves into one place both bind to,
and the two preview builders duplicated in trim.rs go with it.
A fence is not the polygon test with crossing set: that closes the point
list and counts whatever lies inside, so a line drawn past a row of
objects would take everything behind it too. It gets a hit test that only
counts a real intersection, and skips the area-based geometry entirely.
The lasso gathered its hits from wires, hatches, block hatches, meshes and
block meshes inline; the new modes need the same list, and a second copy
would drift. Both now come through `Scene::path_hit_handles`.
Closes#596
Co-Authored-By: Claude Opus 5 <[email protected]>
Add a searchable block palette with previews, file import, collision-safe nested definitions, and dependency/table-record import. Keep palette thumbnails current across drawing switches and block-definition edits.
- preserve command history colors after reopening
- remove collapsed command bar residue and split the unsaved prompt
- read system text when the drawing clipboard is empty
Refs #467
Refs #468
Refs #470
- Keep the floating panel near the selection and inside the viewport
- Persist the toggle and hide the panel without a selection
- Show only Material in 3D Visualization
Hakan Seven