Arcs are now full constraint participants (center/radius via the existing
Circle-shaped solver path, plus real endpoints kept consistent by arc-rules
CurveValue constraints); adds Diameter/DistanceX/DistanceY/ArcLength/Normal
constraint kinds and initial Ellipse entity support (center-based
constraints only). DWG-native class mappings and gaps (ArcLength, Ellipse)
are grounded against real ObjectARX headers rather than guessed, so files
saved with DWG-native constraints stay honest about what AutoCAD can
actually represent.
Also fixes a case-sensitivity bug where a lowercase named-parameter
reference typed at a dimensional constraint's value prompt was rejected
(the command line uppercases SingleToken input before the parameter-name
lookup), and adds a "Used by" column to the Named Parameters panel.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Brings in 54 commits from origin/main: a selection-performance overhaul,
surface thickening, GPU-native wide/tapered stroke rendering, continued
ocs_doc_api evolution, and assorted fixes/polish (block double-click
editing, DWG hatch/database repair, clipboard, collapsible Properties
sections).
Six real conflicts, all where this branch had independently re-applied
a fix upstream later revised or already carried natively:
- src/app/automation.rs, src/app/command_driver.rs: combined both
sides — kept this branch's sketch-constraint/named-parameter loading
on "new"/"open", adopted main's Scene::clear()/material_base_dir and
its newer rebuild_derived_caches() over the older bump_geometry().
Scene::clear() (src/scene/entity.rs) now also resets
sketch_constraints/named_parameters, so every caller gets this for
free instead of each call site repeating it.
- src/io/mod.rs, src/scene/render_graph.rs: adopted main's design
outright (commit 973af87d, authored by Hakan directly) — a large
MINSERT is no longer purged as "corrupt" at load, only its rendering
is bounded, preserving the source data. This branch's own earlier
design (reject at load) predates that revision.
- src/scene/pipeline/mesh_gpu.rs: adopted main's valid_rgba_size()
guard (a real robustness improvement over this branch's version).
- src/snap.rs: replaced wholesale with main's version — this branch's
copy was an explicit verbatim snapshot from an earlier upstream PR
(commit 4c264b8c) with zero constraint-system-specific content, and
main has since evolved it considerably further.
Also removed two now-dead duplicates the merge surfaced without a
conflict marker (both branches had independently fixed the same
things): the OPTIONS/OP command dispatch/autocomplete entries, and
automation.rs's open_finalizes_and_purges_like_the_ui_open_path test
(kept main's version, which covers strictly more: solid_models/
material_base_dir reset on "new").
Full workspace suite passes (812 lib tests + this branch's own 24
constraint/persistence integration tests) except the one pre-existing,
unrelated font-test failure already present on main. Zero clippy
findings in the hand-written merge resolution itself; the ~1,171
warnings clippy reports are pre-existing in the 54 absorbed commits,
not introduced here.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
New ConstraintKind variants — Concentric, CenterPoint, Colinear, Midpoint,
Fixed, PointOnCurve, EqualDistance, Symmetric — each built entirely from
existing ocs_gcs (FreeCAD planegcs) primitives, no new solver math needed.
build_constraint now returns Vec<Rc<dyn Constraint>> instead of
Option<Rc<...>>, generalizing the old Coincident-only "needs a second
system-level constraint" special case to every kind that needs one.
Wired into the ribbon (7 new buttons), a new point+pre-selected-entity
command for CenterPoint/Midpoint/PointOnCurve, a new 4-point command for
EqualDistance, and the existing DWG-native class-name mapping (all 8 reuse
the same generic "plain Geometrical node" path already built for
Coincident/Horizontal/etc.). Deliberately not modeled: Normal and
EqualCurvature, which for this app's Line/Circle-only entity model would
just be Perpendicular and Equal wearing different DWG class names.
Also makes DWG-native constraint persistence opt-in (Options > General,
off by default) rather than unconditional: a scope that doesn't yet have
the native graph is only given one when the setting is on, but a scope
that already has one — from an earlier save, or a file that came from
real AutoCAD — keeps getting it resynced regardless of the setting, so
toggling it off never freezes a stale graph in place.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Named parameters (docs/named_parameters_design.md, stages 3-4):
- ParameterTable (src/scene/named_parameters.rs): a document-wide table of
named formulas, each resolved through a shared expression evaluator with
cross-parameter references, cycle detection, and division-by-zero/parse
error reporting. SketchConstraint::driving_param becomes DrivingValue
(Literal | Named) instead of a bare f64, resolved at solve time by
sketch_solve::build_constraint via Scene::named_parameters.
- Persistence (src/scene/named_parameters_persist.rs): same lazy XRecord
model sketch_persist.rs already established, synced around open/save.
Bumps the sketch-constraint XRecord's own format version (1 -> 2) since
DrivingValue's shape doesn't line up with a version-1 blob's bytes.
- PARAMETERS command and its editor (src/ui/window/named_parameters.rs):
add/remove/edit rows, live validation, duplicate-name detection: Apply
defines the table and re-solves every constraint scope with a
named-parameter-driven constraint (command_driver.rs). Distance/Angle
constraint prompts (modules/draw/constrain/value.rs) now accept either a
literal or an existing parameter's name, mirroring how the constraint's
own value prompt already worked.
- Undo scope-down carried over from this project's own established pattern
(constraint-system stage 9): the geometry an Apply moves is one undo
step, but the parameter table edit itself has no undo entry yet — a
documented follow-up, not a silent gap.
UI scale setting (src/app/settings.rs, app/mod.rs, ui/window/options.rs):
a whole-interface scale percentage (50-200%), wired directly into iced's
own per-window scale_factor hook rather than per-panel font-size
plumbing, so it applies immediately to every panel, dialog, and the
ribbon at once. Persisted alongside the existing lineweight-display-scale
setting.
OPTIONS/OP command dispatch (app/commands/view.rs, app/commands/mod.rs):
OPTIONS was registered for autocomplete but had no dispatch arm — the
Start-tab welcome screen's own button was the only way to reach it.
Found live-testing the UI-scale setting, unrelated to that feature
itself. "OP" is AutoCAD's own short alias.
help/: a new self-contained static user-help manual (manual.md as the
authored source, tools/build_help.py splits it into the committed static
HTML pages plus search index) — not yet wired into the application.
64 new/updated tests across the named-parameters and constraint-prompt
changes.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <[email protected]>
Resolve curve intersections through cadkernel, retain empty exact results, gather analytic candidates independently of tessellation, and bound material uploads. Preserve large MINSERT data while limiting rendering work; remove obsolete review narratives.
Ports FreeCAD's planegcs 2D geometric constraint solver to Rust as a new
crates/ocs_gcs workspace member, and wires it into the document/scene model
as a persistent SketchConstraintSet: Coincident, Horizontal/Vertical,
Parallel/Perpendicular, Equal, Tangent, Distance, Angle and Radius
constraints that re-solve live (including mid-drag, not just on release),
render glyphs and a DOF badge, flag conflicts with a one-click resolver
pill, and round-trip through save/load via an XRecord blob.
Also includes docs/command_reference.md (a statically generated reference
of every registered command and its prompt sequence) and
docs/named_parameters_design.md + docs/backlog.md, which hand off the next
queued feature (a named-parameter/expression table) and consolidate every
deliberate scope-down and open gap found along the way, so a fresh session
has a complete starting point.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Model space appearance now follows the active UI theme instead of a
hardcoded dark background. Canvas mode is user-selectable (Match Theme /
Classic CAD Dark / Custom RGB), with matching controls for the paper
sheet and desk surround backgrounds and grid opacity.
Implements industry-standard CAD system variables, all settable via
command name, SETVAR, and the Options dialog:
- COLORTHEME (0/1 dark/light UI scheme, preserves custom palettes)
- COLORSCHEME (interactive named-theme selection)
- BACKGROUND (THEME/CLASSIC/DEFAULT/DESK presets, RGB triplets)
- SELECTIONAREA, SELECTIONAREAOPACITY (translucent marquee fill)
- WINDOWSAREACOLOR/WINDOWAREACOLOR, CROSSINGAREACOLOR (ACI or theme)
- SELECTIONEFFECT, SELECTIONEFFECTCOLOR (GPU highlight pass, driven by
selection_generation invalidation — no retessellation)
- SELECTIONPREVIEW (bit 0 = idle rollover, bit 1 = in-command hover)
- GRIPSIZE, GRIPCOLOR, GRIPHOT, GRIPHOVER (grip overlay styling)
Replace manual key entry with per-row capture cells: clicking + Add
inserts a draft row at the top with its key cell armed, and the next
key combination is recorded and normalized (Ctrl+Shift+S →
CTRL+SHIFT+S). While armed, a dedicated keyboard listener swallows all
input so recorded shortcuts do not execute in the drawing.
Draft rows are transient and confirmed only through an explicit accept
button, so the table never retains empty rows. Duplicate keys and
unrunnable commands are flagged in danger styling with a persistent
warning naming the conflicting command. Added reset-to-defaults with
confirmation, apply-and-exit, a shortcut count, and an unsaved-changes
guard on close.
OpenCADStudio/plugins#901
- Record the host's rustc --version output in the embedded version_info.json.
- Add rustc_version/rustc_declared/rustc_compatible to plugin manifests and
release metadata, mirroring the existing acadrust gate.
- Reject API v4+ plugins whose declared rustc differs from the host, with a
clear one-line error message.
- Propagate the rustc gate through the marketplace, install flow, and UI.
- Update plugin architecture docs to describe the new ABI metadata.
Sync current main and companion codec changes before preserving unsupported frame rows, rendering in the entity plane, and sharing final layout metrics with placement preview.
- Add host_acadrust_source and source-hash comparison helpers to ocs_plugin_api.
- Track acadrust_source and acadrust_declared in ExternalPlugin/ReleaseInfo.
- Apply repo-level policy: if any release in a repo declares acadrust_source, undeclared v4+ releases from that repo are incompatible.
- Preserve API v2/v3 backwards compatibility: legacy undeclared releases stay installable.
- Update Plugin Manager UI to only offer compatible releases and show 'acadrust mismatch' status.
- Drop acadrust_version from gate logic; only acadrust_source is required.
The readout learned to write lengths as 5'-6 1/2" and angles as
N 45d0'0" E, but typed input was still a bare parse::<f64>() — a
coordinate could be displayed and not entered. Give the formatters
their inverses.
parse_length takes feet and inches separated by a dash, a space, or
nothing, with the closing quote optional, and whole-plus-fraction in
any of those forms: 5', 60", 5'-9", 5'9-1/2, 9-1/2, 1/2. A leading
minus is a sign; the one inside 5'-9" is a separator, since after feet
there is nothing left to subtract from.
parse_angle reads the mark that says which convention an angle is in —
g for grads, r for radians, d/'/" for degrees-minutes-seconds, compass
letters for a surveyor's bearing — and reads a bare number in whichever
convention the drawing is set to.
ANGBASE and ANGDIR now apply, but only where they mean something. Which
way a thing points is measured from the drawing's zero and runs the way
it says; how wide an arc opens is the same number whatever zero is
counted from. format_direction and parse_direction are the pair for
directions, and the polar readout and polar input both go through them,
so the bearing shown is the bearing accepted. format_angle stays for
sizes, where applying a base angle would corrupt the value.
The command prompts follow the same rule, each classified rather than
swept: OFFSET distance, FILLET radius, CHAMFER distances, ARRAY and
MINSERT spacing, TRACE width, HELIX, and EXTRUDE height read lengths;
the four dimension text-rotation prompts, ARRAY's total angle and
INSERT's rotation read angles. MLINE's scale and INSERT's scale factor
are left alone — a multiplier has no unit to be written in. INSERT read
both through one parse; they are now separate.
The typed variants also take a decimal comma, which a single-value
prompt has no other use for. parse_length itself does not: inside a
coordinate the comma separates the axes.
Co-Authored-By: Claude Opus 5 <[email protected]>
The status-bar units button wrote INSUNITS, which nothing on screen reads.
INSUNITS only tells the drawing how to scale content arriving from
elsewhere, so picking a unit relabelled the drawing and changed nothing
visible — the selector looked broken because the variable it moved was
invisible.
Point the button at LUNITS instead, the setting that decides how every
coordinate and distance is written, and give the three questions the word
"units" runs together a place each:
- The button offers the five length formats, each shown beside a sample of
itself, so Engineering and Architectural are told apart by sight.
- UNITS / DDUNITS opens a real dialog: length and angle format and
precision, the direction angle zero points, whether positive angles run
clockwise, and the insertion unit. Its sample comes from the same
formatters the drawing uses, so it cannot drift from the readout.
- DWGUNITS converts. Model geometry, viewport framing, the header's length
defaults and each dimension style's scale all move together in one undo
step; paper space is left alone, since the sheet is still the same sheet.
Locked layers are converted too — a half-converted drawing would be at
two scales at once.
The coordinate readout formatted at four decimal places whatever the
drawing asked for; it now goes through the same format_length the
properties panel uses. That made the angle formats reachable in turn, so
degrees-minutes-seconds now carries the d/'/" marks that say which
convention it is, and surveyor's units are written at all.
Typed input is still plain decimal: a length the readout writes as
5'-6 1/2" cannot yet be typed back. ANGBASE and ANGDIR are stored but not
yet applied to displayed directions.
Closes#668
Co-Authored-By: Claude Opus 5 <[email protected]>
Registering as the .dwg/.dxf handler was reachable only by typing
FILEASSOC, which is also the only thing that installs the icons the
desktop shows — so a user with no reason to know the command had no way
to arrive at either.
The checkbox makes the same two calls the command does, so the stored
setting and the actual registration cannot drift apart. A registration
the system refuses puts the checkbox back rather than leaving it showing
a state that is not true.
The line under it says the icons come with it, since that is what sends
people looking for this in the first place.
Co-Authored-By: Claude Opus 5 <[email protected]>
Drawings arrive from elsewhere carrying someone else's layer names, and
folding them into a set of house layers meant renaming and merging by
hand, one layer at a time.
LAYTRANS reads a layer set out of another drawing and moves this one onto
it. Given a file it maps every name the two already share and translates
at once, which is all most incoming drawings need. Bare, it opens a
translator: the drawing's layers on one side, the loaded set on the
other, mappings built up between them and applied only on Translate, so a
mapping can be reconsidered and the whole translation is a single undo
step. Mappings can be saved and read back, objects can be forced to
ByLayer so the target layer's properties are what actually shows, and the
result can be written out as a log.
The move itself is the one LAYMRG already made for a single pair, so
LAYMRG now goes through it too rather than keeping its own copy.
Three things fell out for free or nearly so. A standards file is a
drawing, so .dws and .dwt need nothing but a place in the file filter.
The entity list is flat and holds block definitions, so objects inside
blocks travel with everything else instead of being stranded on a layer
that no longer exists. And a target layer that this drawing already has
is left alone: the drawing has an opinion about it, and restyling it
would reach past what was asked for -- only newly created targets take
the standard's properties.
Mappings are saved beside the drawing rather than inside a DWS. That is
where AutoCAD keeps them, but putting them there would mean inventing a
place in the drawing that nothing else reads back.
Closes#624
Co-Authored-By: Claude Opus 5 <[email protected]>
Add a searchable block palette with previews, file import, collision-safe nested definitions, and dependency/table-record import. Keep palette thumbnails current across drawing switches and block-definition edits.
Keep OFFSET picks current across newly created entities and preserve the command after pick-first offsets.
Use palette-provided contrast colors for active status controls and Alias Editor removal buttons.
Refs #653
Refs #658
Refs #659
