- ARC: per-step DynSpec for the typed-value modes — included-angle (SCA,
CSA), chord length (SCL, CSL) and radius (SER) show their box and route
the typed value through on_text_input via a new dyn_commit_as_text()
hook; the angle box previews the live span. Point/3P/SCE steps stay on
the legacy polar path.
- ARC + ellipse-arc: derive the previewed sweep direction from the swept
angle with a ~10° tolerance and advance the reference only on a clear
move, so small cursor jitter no longer flips the arc. Ellipse uses the
parametric angle so a flat ellipse isn't sticky.
- Ellipse arc: the start-angle step now shows a line from the centre to
the cursor (it only picks the start angle) instead of a misleading arc.
- Ellipse arc: use the same minor-axis direction (Z x major) as the
rendered entity so the committed arc matches the preview instead of
mirroring across the major axis.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Extend the DynSpec coverage and add the guides those commands need:
- Rectangle: two-corner enters width/height as unsigned magnitudes (the
sign follows the cursor side, like the angle entry), drawn with the
rectangle as the guide; rotated rectangle's height is a single distance
measured square to the base edge (dimension line offset off the edge
with extension lines); centre rectangle shows half-width/half-height.
- Polygon: inscribed/circumscribed vertex step shows radius + rotation.
- Ellipse: minor-axis step (all three modes) measures the half-length
perpendicular to the major axis and draws that semi-axis from the
centre; angle steps anchor their arc at the centre.
Adds DynGuide::Perp / PerpDim (perpendicular measure to a reference line)
and DynSpec::ref_point, plus Width/Height role handling (unsigned display,
cursor-signed commit) and diameter value scaling.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Introduce a per-command, per-step dynamic-input description so each step
shows the value boxes and guide geometry that make sense for it, instead
of a one-size-fits-all distance/angle pair.
- command: add DynSpec{anchor, fields(role+label), guide}, DynRole
(X/Y/Z/Distance/Angle/Radius/Diameter/Width/Height/Factor/Count with
label + value scaling), DynGuide(None/Polar/AxisDelta/Radius/RectSides)
and DynAnchor. New dyn_spec() trait method defaults to None so commands
on the legacy dyn_field() path are unchanged.
- overlay: redraw the dynamic-input layer by guide — polar reference line
+ angle arc, single radius line, dotted axis legs, or a cursor row —
and place each box by its role. Angle reads as the unsigned magnitude
of the short arc; a typed polar angle takes the sign of the cursor side.
- app: route fields/guide/anchor through the tab; resolve points from the
step anchor and de-scale typed values by role (typed diameter -> radius).
- circle: CR shows a radius value on one line to the cursor; CD shows the
diameter (twice the cursor radius). No angle arc on radius steps.
- pline/mline: keep polar dynamic input on vertex steps that also accept
keyword letters via point_step_accepts_keywords().
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Text-input steps (OFFSET distance, POLYGON sides, radii, counts) were
swallowed by the dynamic-input overlay: typed digits landed in the field
buffer and Enter committed a point pick, so the value never reached
on_text_input (issue #61). Now each text step shows one scalar box whose
value routes to on_text_input on commit; non-numeric prompts (names,
keywords) keep going to the command line so mixed text like "Bolt12"
isn't split.
OFFSET reworked: object first, then through-mode by default — the offset
follows the cursor at the perpendicular distance to the object. Typing a
number locks the magnitude (cursor then only picks the side); a value
typed and clicked without Enter is applied before the point pick.
The dynamic-input overlay and the command line now show the active
step's prompt and hold it until the step completes.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The drawing plane is world XY, but break, join, rectangular array, the
stretch/window move, the spline preview wire and several doc comments
still used the stale "Y-up XZ" mapping (world Z = DXF Y). That made
those commands operate against a constant-elevation axis: arc/circle/
line/spline break and join picked the wrong points, rectangular array
stepped rows along the Z (elevation) axis, window-stretch tested the
wrong window bound, and the spline wire drew in the wrong plane.
Map every drawing-plane coordinate through .y (elevation on .z),
matching the entity builders, the inquiry commands and the central
transform. Stale Y-up comments updated to avoid future confusion.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rename the Home tab to "Draw" and add a Model tab beside it with two
groups:
- Model: BOX / CYLINDER / CONE / SPHERE / WEDGE / TORUS, placed with a
footprint + height. Each is built as a real ACIS Solid3D (acadrust
primitive builders) plus a truck B-rep, tessellated into the shaded
mesh pipeline, with edge wires for picking + wireframe.
- Design: UNION / SUBTRACT / INTERSECT via truck-shapeops.
A session-only Scene.model_solids cache holds each solid's truck B-rep
so the boolean tools can combine and chain them. Supersedes the old
command-line BOX/SPHERE/CYLINDER (insert::solid3d_cmds keeps EXTRUDE/
REVOLVE/SWEEP/LOFT).
Known limitations: booleans need solids created this session; curved
ACIS primitives render in-session but not after reload (the SAT
tessellator handles only planar caps); geometry assumes world_offset 0.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Route every text-bearing entity to an in-place editor instead of the
command line: a plain text box for single-line text (Text, attributes,
dimension override, tolerance) and the rich MText editor for MText /
MultiLeader. A Leader resolves to the entity it annotates.
- TEXT places a plain text box at the click; double-click edits in place.
- DDEDIT and double-click on any text entity open the matching editor.
- MLEADER places the leader then opens the MText editor on its content.
- LEADER follows the classic flow: points, Enter, then a linked empty
MText annotation opens in the editor; the leader's annotation_handle
links the pair so they edit/erase as a unit.
Adds shared field read/write helpers and a begin_text_edit router, plus
CommitAndEditText / CommitManyAndEditText results that commit an entity
and open its editor (commit_entity now returns the new handle).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- Added SVG icons for text formatting options (bold, italic, underline, overline, strike, uppercase, lowercase).
- Introduced a new `MTextEditorState` struct to manage the state of the MText editor.
- Implemented functionality to open the MText editor from the command line and edit existing MText entities.
- Added message handling for various MText editor actions (formatting, height, style, font, justification, alignment, line spacing).
- Created a dedicated preview area for MText rendering within the editor.
- Updated the command structure to support opening the MText editor and handling text input.
- Refactored existing MText command logic to integrate with the new editor.
DYN overlay artık ekran-yukarı için world Y'yi (w.y) gösteriyor; eskiden
w.z kullanıldığı için Z-up sahnede top/3D görünümde Y hep 0 görünüyordu
(#27).
Ayrıca overlay etiketi aktif komutun o anki sorusuna göre biçimleniyor:
yeni DynField (Point / Distance / Angle) trait metodu eklendi. CIRCLE
yarıçap adımında 'd=...', ROTATE açı adımında '<...°', diğer nokta
adımlarında koordinat / polar (d + açı) gösteriliyor.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Type-as-you-go suggestion popup above the input that filters known
command names by substring (so `LEADER` surfaces both LEADER and
MLEADER). Up / Down navigates the list, Enter dispatches the
highlighted entry, clicking a row dispatches directly. Esc on a
non-empty input clears the buffer instead of escalating to
command-cancel.
The name corpus comes from `inventory::submit!` blocks placed next
to each `CadCommand` impl rather than a hand-maintained static list.
Adding a new interactive command means dropping one `inventory::submit!`
line in its own module file — the autocomplete picks it up at the
next compile. 98 submissions seeded across 60 module files;
`command::all_registered_command_names()` flattens them at runtime.
One-shot dispatch arms in `app/commands.rs` (NEW, OPEN, SAVE, UNDO,
…) don't have a `CadCommand` impl and are therefore absent from
autocomplete by design.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Two behaviour changes that bring the command line in line with
established CAD workflow:
1. **Always-on keyboard capture.** The input was blurred whenever no
command was running, so typed letters went nowhere until the user
clicked into the field. Replace the blur with a re-focus on every
command lifecycle transition (cmd_result.rs) and on viewport / tab
/ ribbon clicks (update.rs), focus the input at startup, and add
a global key subscription that catches any unhandled character key
or backspace and routes it into the buffer via two new messages
(CommandAppendChar / CommandBackspace) — so the command line keeps
accumulating keystrokes even if focus parks somewhere not
focusable. Removes the unused blur_cmd_input helper.
2. **Space submits.** Typing a space at the end of the input now
submits the buffer the same way Enter does. Only exception: an
active command that's currently collecting free-form prose
(TEXT / MTEXT / DDEDIT body, ATTDEF prompt / default value,
INSERT attribute value, ATTEDIT cell). Those advertise the new
`CadCommand::wants_text_with_spaces()` flag so the Space character
reaches the buffer as a literal.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
New dimension commands: QDIM, DIMEDIT, DIMTEDIT, DIMBREAK, DIMSPACE,
DIMJOGLINE with full command workflows and SVG icons.
New multileader commands: MLEADERADD, MLEADERREMOVE, MLEADERALIGN,
MLEADERCOLLECT with entity injection pattern for in-place editing.
Updated annotate ribbon: all tools exposed across Text, Dimensions,
Leaders, Tables, Markup, and Annotation Scaling groups. Added STYLE,
FIND, DIMSTYLE shortcut buttons.
Added `inject_picked_entity` to the CadCommand trait for commands that
need a cloned copy of the picked entity to modify (DIMTEDIT, MLEADERADD,
MLEADERREMOVE). Sentinel-based dispatch in cmd_result.rs handles
DIMBREAK, DIMSPACE, DIMJOGLINE, MLEADERALIGN, and MLEADERCOLLECT.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Picks 2+ profile entities (closed or open wires), builds ruled shells
between consecutive pairs via builder::try_wire_homotopy, caps closed
ends with planar faces, and tessellates the result into a Solid3D mesh.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Picks a profile (closed or open 2D entity) then a path entity
(Line or LwPolyline). For Line paths uses tsweep along the line
vector; for Polyline paths uses start→end as translation direction.
Closed profiles produce a capped Solid; open profiles a Shell.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
BOX, SPHERE, and CYLINDER build truck topology solids and tessellate
them into MeshModels stored alongside a Solid3D placeholder entity so
the GPU mesh pipeline renders them immediately.
EXTRUDE picks any closed 2D profile (Circle, LwPolyline, etc.),
attaches a planar face via try_attach_plane, and translational-sweeps
it (tsweep Face → Solid) along Z by the given height.
REVOLVE picks a profile, two axis points, and an angle (default 360°),
then rotational-sweeps the wire (rsweep) around the axis.
Three new CmdResult variants drive the operations:
CommitSolid3D, ExtrudeEntity, RevolveEntity.
Scene::layer_color() added to retrieve the active layer's RGBA color.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
When inserting a block that contains AttributeDefinition entities,
the INSERT command now enters an attribute-filling phase: each attdef
is prompted tag-by-tag (showing its prompt text and default value).
Pressing Enter accepts the default. The completed AttributeEntity list
is embedded in the Insert before committing.
Blocks without attdefs continue to insert immediately as before.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- attedit.rs: AtteditCommand picks an INSERT entity then iterates through
each attribute tag prompting for a new value (Enter keeps existing)
- attedit_pending_handle() / attedit_set_attrs() trait methods inject
attribute data into the command after entity-pick (avoids document access
in the command itself)
- cmd_result.rs: NeedPoint handler injects attr data; ReplaceEntity detects
the __ATTEDIT__ sentinel and calls apply_attedit() on the document
- apply_attedit() encodes tag/value pairs as __ATTEDIT__tag\x01val\x02...
- ROADMAP.md: ATTEDIT marked ✅
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Replaced the simplified MOVE-based STRETCH with a real crossing-window
implementation. Workflow: pick two crossing-window corners, then base+target
points. Only vertices/endpoints inside the window are translated:
- Line: moves start/end independently
- LwPolyline/Polyline: moves individual vertices inside window
- Arc/Circle/Ellipse: moves whole entity if center is inside
- Insert/Text/MText: moves if insertion point is inside
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add HATCHEDIT (HE alias) command. Works on pre-selected hatch or via
entity pick. Accepts text options: P <pattern>, S <scale>, A <angle>.
Enter applies changes; rebuilds hatch entity and GPU model via add_hatch.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add DDEDIT (ED alias) command that edits Text/MText/Attribute entities
in-place via the command line. Double-clicking a text entity in model space
now auto-launches DDEDIT for that entity. Supports Text, MText,
AttributeDefinition, and AttributeEntity types.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Entity pick → text input subcommands:
C / CLOSE → set closed flag
O / OPEN → clear closed flag
W <value> → set uniform width on LwPolyline vertices
X / EXIT → cancel
Command stays active after each op (CmdResult::PeditOp) for multiple edits.
Supports LwPolyline and Polyline2D.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Options via text input after entity pick:
DE <delta> — extend by delta (negative trims)
TO <total> — set absolute total length / arc length
P <percent> — scale by percentage
<number> — plain number treated as DE delta
Closest end to pick point is modified. Uses CmdResult::LengthenEntity.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Selection-gathering mode: select objects, press Enter to apply.
- Lines: checks collinearity + no-gap, merges into single line span
- Arcs: checks same center/radius + contiguous angles, merges to Arc or Circle
- Uses CmdResult::JoinEntities; geometry computed in cmd_result from document
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
3-step interactive flow:
1. Entity pick (first break point recorded at click location)
2. Optional first point refinement
3. Second break point → CmdResult::BreakEntity applied in cmd_result
Geometry:
- Line: project p1/p2 onto line parameter space → two line fragments
- Arc: project p1/p2 to arc angles → trim CCW from p1 to p2
- Circle: same as Arc, converts Circle → Arc
- LwPolyline: nearest-vertex split → two polyline fragments
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add three classic CAD measurement commands:
- DIST (DI): two-point pick → distance, angle, delta XYZ
- ID: one-point pick → coordinates
- AREA: multi-point polygon pick (Enter to close) → area + perimeter
New CmdResult::Measurement(String) variant ends active command and
prints result to command line without modifying the document.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Enforce status.locked in pan_active_viewport and zoom_active_viewport:
locked viewports now reject pan/zoom inputs entirely
- Add perspective, render_mode, shade_plot_mode, hide_plot, ucs_icon_visible
fields to the viewport property panel with appropriate pickers/toggles
- Add VPORTS command: lists all user viewports in the current layout
(id, size, position, scale, on/locked state) in the command line
- Add VPLAYER command: per-viewport layer freeze/thaw from the command line
(F <layer> to freeze, T <layer> to thaw, Enter to exit)
- Add CmdResult::VpLayerUpdate variant and its handler in apply_cmd_result
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Each command implementation is now in the same file as its ribbon
tool definition. Groups moved to a dedicated groups/ toolbar folder.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
