The status-bar units button wrote INSUNITS, which nothing on screen reads.
INSUNITS only tells the drawing how to scale content arriving from
elsewhere, so picking a unit relabelled the drawing and changed nothing
visible — the selector looked broken because the variable it moved was
invisible.
Point the button at LUNITS instead, the setting that decides how every
coordinate and distance is written, and give the three questions the word
"units" runs together a place each:
- The button offers the five length formats, each shown beside a sample of
itself, so Engineering and Architectural are told apart by sight.
- UNITS / DDUNITS opens a real dialog: length and angle format and
precision, the direction angle zero points, whether positive angles run
clockwise, and the insertion unit. Its sample comes from the same
formatters the drawing uses, so it cannot drift from the readout.
- DWGUNITS converts. Model geometry, viewport framing, the header's length
defaults and each dimension style's scale all move together in one undo
step; paper space is left alone, since the sheet is still the same sheet.
Locked layers are converted too — a half-converted drawing would be at
two scales at once.
The coordinate readout formatted at four decimal places whatever the
drawing asked for; it now goes through the same format_length the
properties panel uses. That made the angle formats reachable in turn, so
degrees-minutes-seconds now carries the d/'/" marks that say which
convention it is, and surveyor's units are written at all.
Typed input is still plain decimal: a length the readout writes as
5'-6 1/2" cannot yet be typed back. ANGBASE and ANGDIR are stored but not
yet applied to displayed directions.
Closes#668
Co-Authored-By: Claude Opus 5 <[email protected]>
Registering as the .dwg/.dxf handler was reachable only by typing
FILEASSOC, which is also the only thing that installs the icons the
desktop shows — so a user with no reason to know the command had no way
to arrive at either.
The checkbox makes the same two calls the command does, so the stored
setting and the actual registration cannot drift apart. A registration
the system refuses puts the checkbox back rather than leaving it showing
a state that is not true.
The line under it says the icons come with it, since that is what sends
people looking for this in the first place.
Co-Authored-By: Claude Opus 5 <[email protected]>
Drawings arrive from elsewhere carrying someone else's layer names, and
folding them into a set of house layers meant renaming and merging by
hand, one layer at a time.
LAYTRANS reads a layer set out of another drawing and moves this one onto
it. Given a file it maps every name the two already share and translates
at once, which is all most incoming drawings need. Bare, it opens a
translator: the drawing's layers on one side, the loaded set on the
other, mappings built up between them and applied only on Translate, so a
mapping can be reconsidered and the whole translation is a single undo
step. Mappings can be saved and read back, objects can be forced to
ByLayer so the target layer's properties are what actually shows, and the
result can be written out as a log.
The move itself is the one LAYMRG already made for a single pair, so
LAYMRG now goes through it too rather than keeping its own copy.
Three things fell out for free or nearly so. A standards file is a
drawing, so .dws and .dwt need nothing but a place in the file filter.
The entity list is flat and holds block definitions, so objects inside
blocks travel with everything else instead of being stranded on a layer
that no longer exists. And a target layer that this drawing already has
is left alone: the drawing has an opinion about it, and restyling it
would reach past what was asked for -- only newly created targets take
the standard's properties.
Mappings are saved beside the drawing rather than inside a DWS. That is
where AutoCAD keeps them, but putting them there would mean inventing a
place in the drawing that nothing else reads back.
Closes#624
Co-Authored-By: Claude Opus 5 <[email protected]>
- preserve command history colors after reopening
- remove collapsed command bar residue and split the unsaved prompt
- read system text when the drawing clipboard is empty
Refs #467
Refs #468
Refs #470
Pin Iced 0.15 so dialogs can measure content before distributing the resolved frame across child panels. Keep the web plugin notice compact and non-resizable.\n\nCloses #582
Use the operating system trust store and Windows proxy settings while keeping TLS verification enabled. Add retryable registry errors with copyable diagnostics.\n\nRefs #563
Replace the raw sentinel input with typed CAD lineweight options so special
values display correctly and unsupported values cannot be entered.
Refs #522
Hold edit leases and compare disk fingerprints before replacement so another editor cannot be silently overwritten.
Offer retry, reload, Save As, or explicit overwrite recovery.
Closes#498
A thin divider after the Name header resizes the column by drag
(60-640 px, session-persistent), riding the shared modal drag flow.
The name elide budget follows the column width, so widening the
column reveals long layer names; the hover tooltip stays for overflow.
Co-Authored-By: Claude Fable 5 <[email protected]>
Deleting/renaming Standard was already blocked in the five style
managers, but a file saved without the built-ins (foreign or damaged)
opened with broken style dropdowns and nothing to reference — re-seed
missing Standard text/dim/table/mleader/mline styles on every open.
Every modal dialog now shows its name in the title bar: centred at
15px across the dialog width, with the move grip and close button
overlaid at the right edge. The bar takes an explicit width from the
caller — a Fill child inside the Shrink frame would blow the dialog
out to the full screen.
Co-Authored-By: Claude Fable 5 <[email protected]>
Route the MTEXT editor through the shared in-canvas modal frame with an
Apply-at-top toolbar (style-manager style): Apply commits and keeps the
editor open (creates on first apply, updates in place after), the ✕
cancels. Give every modal a bottom-right corner resize grip driven by a
shared grow-only `modal_resize` delta that resets with `modal_offset` on
open/close, so each dialog opens at its natural size and can be dragged
larger — style managers included.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
On native the button opens the OS save dialog (folder + name + overwrite)
and on web it starts the download, so it does not itself save — "Continue"
reads truer than "Save".
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Make objects genuinely annotative — carrying real per-scale
representations that interoperate with other CAD apps — rather than just
a native flag. `create_annotation_context` synthesizes the extension-dict
chain (AcDbContextDataManager -> ACDB_ANNOTATIONSCALES -> per-scale leaf)
from the entity's placement; the editable Annotative toggle now covers
Text and block references as well as MText/MLeader; and a new
"Annotation Object Scale" dialog (OBJECTSCALE) adds/removes an object's
per-scale memberships. Requires the acadrust ObjectContextData encoder
(Cargo.lock bump).
Also fixes a render bug where objects carrying an *empty*
ACDB_ANNOTATIONSCALES (a single-representation marker with no per-scale
reps) were treated as annotative and (mis)scaled by the annotation factor
in scaled paper viewports, ballooning the text: an object is now
annotative-by-context only when its scale collection is non-empty, so
such objects render at their base geometry.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Double-click rename did nothing and ratio edits were lost when switching
scales — and on drawings saved by other programs nothing could be edited
at all.
- Fallback scales were virtual (no Scale objects), so edit/rename no-oped;
materialize the standard set into real staged objects when the manager
opens, reverted on close unless applied.
- On third-party DWGs the mutators walked the root named-objects dict ->
ACAD_SCALELIST, which can be unreachable, and matched dictionary keys
that are internal ids (*A1, A0) rather than scale names. Locate the
scale-list dict robustly and match scales by object name + handle.
- Rename rows inline via double-click; repair a dangling current-scale
header pointer on staged rollback.
- Stage text/mleader style-manager edits on switch so they persist like
the scale manager.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the scale popup's inline delete/add affordances with a single
"Manage scales..." row that opens a proper manager, matching the style
managers: it reuses the shared style-manager palette and chrome (toolbar +
list + editor frame), so it looks and behaves like the Text / Dim / MLeader
managers.
The manager lists the drawing's annotation scales (name + ratio, the current
one checked) and edits them through a Name / Paper units / Drawing units
editor: New adds a scale from the fields, Apply renames / re-ratios the
selected one, Delete removes it (never the current scale), and Set Current
makes the selected scale the model-space annotation scale. Backed by
Scene::add_scale / remove_scale / edit_scale on ACAD_SCALELIST.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the custom in-app file-browser save dialog with the native OS
save dialog for choosing the destination path — folder browsing and
overwrite confirmation now come from the OS. A compact in-app modal
still selects the DWG/DXF format and version (a native dialog cannot
carry the version year) and appears only for Save As. Plain Save on an
unsaved drawing defaults to DWG 2018 with no picker. The file-name field
is shown only on web, where there is no native dialog.
Remove the hand-rolled directory listing, folder navigation, and
overwrite modal.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Restructure the plot dialog into a style-manager-style master/detail: a
left list of page setups plus a right settings editor. The list shows
<none> (defaults + PDF) and <previous> (the settings the dialog opened
with), then the drawing's layouts (*Model*, *Layout1*, …) and its
standalone named page setups.
- Named page setups live in the ACAD_PLOTSETTINGS dictionary
(src/scene/page_setup.rs: names/get/save/delete/rename, creating the
dictionary if absent); DWG round-trip verified.
- Toolbar New / Copy / Delete | Set current / Preview / Print. Selecting
a row loads it into the editor; Set current writes to the active
layout. Copy duplicates a layout or a setup into a new named setup;
Delete/Rename apply only to named setups.
- Scene::plot_settings_for(name) generalizes effective_plot_settings so
any layout's settings can be loaded; on open the settings are
snapshotted for <previous>.
- Default selection: model space → <none>; a layout → its own setup.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the old Page Setup panel with a single OCS-styled plot/print
dialog (dropdowns for printer, paper, orientation, rotation, plot area,
scale, quality, shaded plot; checkboxes for plot options). PLOT / PRINT
/ PAGESETUP all open it.
- Printer output via lp: -d printer, -n copies, -o ColorModel=Gray,
print-quality, Resolution; Windows printto verb; list_printers via
lpstat. Preview opens a temp PDF in the OS viewer (never a save
dialog). PDF export reuses the tested pipeline.
- Window pick returns to the new dialog (was the old Page Setup) and the
clipped window plot drives PDF / printer / preview.
- Remember the user's print preferences across sessions in
config/plot.txt (printer, copies, quality, output options, area,
scale); drawing-specific fields (offset/center/rotation) seed from the
layout. Default plot area Window, scale Fit.
- Delete src/ui/window/page_setup.rs and its ModalKind / Message /
buffer state; fold on_page_setup_commit into apply_plot_page_settings.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Pick a rectangular window in model space with the existing PLOTWINDOW command (now enabled in model space, previously paper-space only) and export it to a PDF at a chosen ISO paper size (A4-A0), orientation and scale (fit or ratio). The window is a hard clip boundary. Adds paper-size presets, a window-to-sheet transform, scale + clip support in the PDF exporter, and Page Setup controls (format/orientation/pick window).
The Layer Manager only allowed one layer at a time. Now:
- Ctrl/Cmd-click toggles a layer in the selection; Shift-click selects
the range from the anchor; a plain click selects just one.
- Colour, linetype and lineweight changes apply to every selected layer.
- Delete removes all selected layers at once (reusing the #237 non-empty
warning, now pluralised); layer "0" and the current layer are skipped.
Selection is stored as row indices but re-resolved by name across sorts
and layer-table rebuilds, so it never points at the wrong rows. Modifier
state is tracked via a new SetModifiers message (shift + ctrl/cmd).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Deleting a layer only dropped the layer record, leaving its objects in the
file still tagged with the (now-gone) layer name. Now:
- Empty layer → deleted straight away.
- Non-empty layer → a warning modal ("Layer X is not empty — N objects;
deleting also removes them. Continue?") with Delete Objects / Cancel.
Confirming erases every object on the layer, then removes the layer, as
one undo step. The layer record is dropped before the erase so the
locked-layer guard can't keep its objects.
- Layer "0" and the current layer can't be deleted (reported on the
command line) instead of silently leaving a broken state.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Grow the attribute editor into a three-tab enhanced editor:
- Attribute: the tag/prompt/value list; click a row to select it, edit
its value below.
- Text Options: the selected attribute's Text Style, Justification,
Height, Rotation, Width Factor, Oblique Angle, Backwards, Upside down.
- Properties: the selected attribute's Layer, Linetype, Color,
Lineweight (the colour list also surfaces a non-standard current
colour so it displays and round-trips).
Applying writes value, text-formatting and common-property edits back to
each attribute positionally (guarded on block name + count), with undo
and a repaint. OK/Cancel are replaced by a single Apply button in a top
toolbar that commits but keeps the dialog open, matching the other modal
windows — the frame ✕ closes and discards un-applied edits. The frame
adopts the shared style-window palette, tab styling and sizing.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Double-clicking a block reference that has attributes, or running ATTEDIT
on one, now opens an editor dialog listing every attribute (tag + editable
value) with OK / Cancel. OK writes the values back to the block, with undo
and a repaint; Cancel discards. A block with no attributes still enters
in-place block edit (REFEDIT) on double-click as before. (#192)
ATTEDIT opens the dialog directly when a suitable block is already
selected; otherwise it runs the pick command and the dialog opens once a
block is chosen. This replaces the earlier command-line, per-attribute
prompt flow, which is removed along with its __ATTEDIT__ sentinel path and
the now-unused attedit_set_attrs trait hook; the ATTEDIT command is reduced
to a plain block picker.
The dialog is a tab-scoped in-canvas modal (Plan B): its working copy holds
a document-local handle, so closing that tab or switching away dismisses the
editor rather than risk applying edits to another tab's document.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Two in-canvas confirmations on the Save-As path:
- AEC/Civil drop warning: when the drawing carries unsupported AEC/Civil
(application) objects that survive only as verbatim source-version bytes,
saving to a different version or to DXF would silently drop them. The
dialog reports the count and offers "Save in source version" (keep) vs
"Save anyway" (drop). Same-version DWG saves are lossless and skip it.
- Overwrite confirmation: when the chosen filename already exists in the
target folder, "Replace" / "Cancel" before clobbering it.
The two chain (AEC first, then overwrite) via per-flow acknowledgement flags
reset whenever the Save dialog opens or closes. Detection is a new
io::dropped_on_save_count over the document's Unknown (raw-passthrough)
objects/entities.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Continue tidying the flat ui/ root:
- ui/statusbar/: statusbar.rs becomes statusbar/mod.rs (its
crate::ui::statusbar::* paths are preserved) and absorbs
statusbar_config.rs + statusbar_menu.rs.
- ui/window/: the standalone manager/dialog windows move here —
about, layout_manager, page_setup, plugin_manager, shortcuts,
layers, update_notice, open_progress. The crate::ui::LayerPanel
re-export is repointed so callers are unchanged.
Call sites repointed to the new paths; no compat re-exports beyond the
existing LayerPanel one. ui/ root drops from 21 to 10 flat files with
five subdirs (ribbon, style, popup, statusbar, window).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- Group the flat src/ui/ dir: move the 9 style editors into ui/style/
(dimstyle, mleaderstyle, mlstyle, plotstyle, textstyle, tablestyle,
point_style, style_list, style_manager) and the 6 popups into
ui/popup/ (cycle, isolate, scale, selection_filter, snap, units).
Call sites repointed to crate::ui::style::/crate::ui::popup::; no
compat re-exports. ui/ root drops from 36 to 21 files.
- Rename app/cmd_result.rs -> app/command_driver.rs: the file is the
StepInput->feed_command driver, not the CmdResult type (which lives
in command.rs). Name now matches contents.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Hakan Seven