Tessellation and DIMBASELINE pick up the few DimStyle fields that were
still hard-coded or ignored:
- DIMTMOVE = 1 draws a connector segment from the dim-line anchor to the
saved text_middle_point when the text has been moved
- Leader arrows are resolved via the leader's DIMSTYLE → DIMLDRBLK; the
shape (closed-filled / open / dot / tick / …) is drawn through the same
arrow emitter the dim path uses, including fill_tris for filled blocks
- DIMBASELINE picks up DIMDLI from the active DimStyle instead of the
hard-coded 1.5 increment
- DIMTOFL / DIMTIX / DIMATFIT / DIMUPT / DIMTXTDIRECTION are read so the
fields round-trip on save; their effect is at dim creation, not render,
so they're acknowledged with a no-op block
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Adds a one-shot update check that runs on app boot and pops up a small
"Update Available" window when the GitHub releases API reports a newer
tag than this build's `CARGO_PKG_VERSION`.
- `src/update_check.rs` — async wrapper around a blocking `ureq` GET to
`api.github.com/repos/HakanSeven12/H7CAD/releases/latest`, returns
`Some(version)` when a newer release exists, `None` otherwise (silent
on network / parse failure so a missing connection never blocks
launch).
- `H7CAD::boot` chains a `Task::perform` next to the main-window open
so the check runs in parallel with first-paint.
- New window plumbed like the other floating panels (page setup, about,
etc.): `update_notice_window`/`update_notice_version` state, title
entry, `OsWindowClosed` cleanup, and a `ui::update_notice::view_window`
modal that shows installed vs. latest version plus "Later" /
"Open Release Page" buttons. Open routes through `open::that` to the
releases URL and dismisses the modal.
Dependency: adds `ureq = { version = "2", default-features = false,
features = ["tls"] }` — the smallest blocking HTTP client + TLS combo
that doesn't drag in an async runtime.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Two related click bugs:
1. `point_in_polygon` treated NaN points (the path separators used by
multi-path hatches with islands / holes) as regular vertices,
producing spurious closing edges between sub-paths. The cursor
inside a real hatch failed the test → the click iterator moved on
to the NEXT hatch in HashMap order and silently returned the wrong
one. Rewrite the ray-cast to reset the previous-vertex / path-start
state at every NaN, so each sub-path closes against its own first
vertex and contributes its parity flip correctly.
2. Clicking on a hatch *inside* a block was either missing entirely
(after the visible_hatches_for_click filter) or returning the
block-defn source hatch handle (misleading — that handle isn't the
thing the user sees). AutoCAD selects the parent Insert when a
sub-entity of a block is clicked. Add `Scene::insert_hatches_for_click`
which walks the same explode path `synced_hatch_models` uses and
tags every exploded sub-hatch with its parent Insert handle, plus
`hit_test::click_hit_insert_hatch` which iterates that list. The
click resolver now tries wire → MSPACE hatch → insert-internal hatch
in order, so clicking on a block-internal hatch selects the Insert.
Box / lasso select paths are unchanged — wire hit-test already picks
up Inserts, and dragging a box over block-internal hatches is rare
enough not to need its own resolution path yet.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
* io/xref.rs — replaced the 7-line "BlockRecord::is_loaded turned out to
be unreliable" rationale with a one-liner. The reverted experiment
lives in git history (e88a946, 0996b75).
* refedit::RefEditSession.insert_handle — set at construction but never
read; the "kept for future REFCLOSE DISCARD" TODO can come back via
git history when that feature lands.
* scene::mod — dropped the placeholder MeshModel re-export; nothing
outside `mesh_model` consumes the bare name and MeshLodSet is the
pipeline-facing type now.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
* helpers::wcs_to_ucs — UCS inverse transform with zero call sites.
* scene::Scene::compute_and_set_world_offset — never called; the load
path uses the free function `compute_world_offset` directly.
* tessellate::tessellate_mesh — never called; mesh tessellation goes
through `solid3d_tess`, not the truck Shell/Solid path.
* truck_tess::tess_to_mesh_model — orphaned with tessellate_mesh's
removal.
* MeshModel::WHITE / MeshModel::SELECTED — only used by the removed
tessellate_mesh.
* xattach::Step::FilePath variant — never constructed; XATTACH always
enters through `with_path` after the file picker. Replaced the Step
enum + prefilled_path field with flat `path` / `block_name` fields
and dropped the unreachable text-input flow.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
ACIS SAT entities (Solid3D / Region / Body) were tessellated at one
fixed sampling density (CIRC_SEGS=48, GRID_U=32, GRID_V=16) regardless
of how far they were from the camera. Distant solids paid the full
triangle bill for fragments that mostly resolved to sub-pixel size.
Generate three pre-built LODs per entity at load time:
* LOD 0 (HIGH) — 48/32/16 segments. Use above 200 px projected diag.
* LOD 1 (MID) — 24/16/8. Use 50–200 px.
* LOD 2 (LOW) — 12/8/4. Use below 50 px.
Tessellation cost is paid 3× on load (cheap — typical files have few
solids). Render picks per-frame via `compute_mesh_lod` from each mesh's
`world_aabb` projected diagonal. When a level is missing (e.g. a solid
entity that only emits LOD 0), the selector walks down to the nearest
available slot.
API ripples:
* New `LodConfig` (HIGH/MID/LOW) drives `tess_sat`, `tess_cone_face`,
`tess_sphere_face`, `tess_torus_face`.
* `tessellate_solid3d / _region / _body` now return `MeshLodSet`.
* `MeshLodSet { lods: Vec<MeshModel>, world_aabb }` + `from_single`
constructor so interactive truck-based commands (BOX/CYLINDER/etc.)
that only generate one tessellation stay one-line.
* GPU side gets `MeshLodGpu { lods: Vec<MeshGpu>, world_aabb }` and
a `mesh_lod_levels` per-frame index vector.
* STL/STEP export pulls slot 0 explicitly so the on-disk geometry
isn't downgraded by the view-dependent ladder.
Background-thread lazy generation (per the roadmap) is deferred — the
synchronous eager build is fine for typical CAD files. Switch to a
queue + background tessellator when files with hundreds of solids
become a load-time bottleneck.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
When the host DWG marks an xref as Unloaded (via XREF→Unload in
AutoCAD), the user explicitly chose NOT to load that reference. We
were ignoring that and pulling the external file in anyway, which
on large drawings could push GPU memory past the device budget.
Bump the acadrust dep to the branch that exposes
`BlockRecord::is_loaded`, then short-circuit `resolve_xrefs` for
any entry with `is_loaded == Some(false)`. New `XrefStatus::Unloaded`
surfaces this in the command-line log so the user can see which
references were skipped (and can re-load them via the XREF dialog).
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Tessellates each block_record once into local-coord LocalWires; Insert
references transform-copy + ByBlock-resolve the cache rather than
explode+re-tessellate per reference. Same-style wires inside one Insert
are NaN-batched into a single WireModel to keep wgpu buffer counts
sane — large blocks that previously bailed to a marker now render in
a handful of buffers each.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
A real DWG with an xref containing ~74k sub-entities froze on the first
render: Insert tessellation exploded the block, style-resolved every sub
serially, and one bad sub could hang the loop forever.
- Insert short-circuits to an insertion marker when the referenced block
has more than INSERT_SUB_LIMIT (5_000) sub-entities. Documented as
temporary in RENDERING_OPTIMIZATION.md.
- Re-run purge_corrupt_entities after resolve_xrefs so parser-garbage
inside xref content is caught (initial purge runs before xref load).
- build_derived_caches: single pass over entities collecting handles
per kind; tessellation reads via doc.get_entity instead of cloning
every EntityType. Image decode now parallel too.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
acadrust's DWG reader occasionally desynchronises on certain files
(observed on render.dwg: 1519 of 1763 LwPolylines arrived with non-unit
normals in the 1e200+ range and 100k phantom vertices). Tessellating
those entities allocates gigabytes and produces NaN-laden wires,
freezing the UI.
Add a pre-tessellation guard that scans freshly loaded documents and
drops any entity failing a cheap sanity check: non-unit normal,
non-finite or absurd coordinate, or vertex count above 100k. Count of
dropped entities is threaded through DerivedCaches and surfaced as a
warning in the command line so the user knows the file was patched up
on the way in.
Same file in DXF form parses cleanly (0 corrupt), so this is strictly
a DWG-path workaround until the upstream parser bug is fixed.
The new examples/inspect_polyline.rs is a one-off diagnostic that dumps
LwPolyline/Polyline2D/Polyline3D fields plus a corrupt-entity count;
useful for narrowing down the acadrust bug.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Big DWG/DXF files block the UI for seconds during parse + cache build,
leaving the user wondering whether the app froze. Split the file-open
flow into pick → load and show a modal overlay during the load: file
name, size, phase label (Reading / Parsing / Building caches /
Finalizing), animated indeterminate bar, and Cancel button.
Phase is tracked via a shared AtomicU8 written by the loader thread
and read by the overlay each frame. Cancel hides the overlay and
discards the result; the parser thread runs to completion in the
background since acadrust has no interrupt hook.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Parsing + DerivedCaches construction now runs entirely in a dedicated
OS thread inside open_path(). FileOpened handler only assigns the
pre-built caches, keeping the UI thread free during file load.
- Add build_derived_caches(): parallel hatch + mesh tessellation via rayon
- Extend Message::FileOpened / open_path return type with DerivedCaches
- Drop populate_*_from_document() calls from FileOpened handler
- Scale popup dropdown replaces cycle behavior; paper-space viewport scale
editable when a viewport is active/selected
- CANNOSCALE persisted via DXF $USERR1 (read on open, write on save)
- PSLTSCALE: linetype dash lengths scaled by viewport anno_scale so dashes
appear uniform physical size in paper space
- MultiLeader: arrow size, dogleg length, and text height scale with
anno_scale; leader line paths (world coords) stay fixed
- Leader: arrow size and hookline length scale with anno_scale; also
corrects world_offset subtraction that was previously deferred to the
TruckObject::Lines path
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Viewport-projected wires now clip at pixel level to their viewport boundary.
- WireModel.vp_scissor: Option<[f32; 4]> — paper-space bbox set on projection
- WireGpu.vp_scissor carries it through to the draw loop
- Pipeline.compute_wire_scissors() converts paper→NDC→pixel each frame
- render() calls set_scissor_rect() per wire, reset after viewport group
- INTEGRATION_GAPS.md: Viewport ⚠️ → ✅, all 51 gaps resolved
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
GripApply::Absolute adds world_offset to convert local-space coordinates
back to DXF space for model-space entities. Paper-space entities (viewports,
etc.) use sheet mm coordinates with no world_offset, but the grip drag code
was unconditionally adding scene.world_offset — causing grips to jump by the
full model-space centroid offset (potentially hundreds of km for UTM drawings).
Now world_offset is only applied when current_layout == "Model".
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Commands receive click coordinates in local space (DXF coords minus
world_offset) for camera precision. Without correction, entities were
placed world_offset away from the clicked position in existing drawings
that have a non-zero centroid (e.g. UTM-coordinate drawings).
Re-add world_offset via acadrust::Transform::from_translation (f64
precision) in commit_entity before the entity is inserted into the
DXF document. Paper-space entities are exempt as they use sheet coords.
Fixes#11
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Implements a full in-app file browser window for Save As, replacing the
rfd dialog that could not expose the selected filter index on Linux.
The new chooser includes directory navigation, a scrollable file list,
filename input, and a format drop-down (DWG/DXF × 2018/2013/2010/2007/2004/2000/R14).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
rfd does not expose the selected filter index, so the old DWG/DXF version
filters had no effect — every file was always saved as AC1032 (R2018).
Replace with a single custom iced Save As window that shows:
- File name text input
- Save-in folder input + Browse button (rfd folder picker)
- Format dropdown: DWG/DXF × 2018/2013/2010/2007/2004/2000/R14
- Save / Cancel buttons
The selected format is passed to save_as_version() which temporarily sets
doc.version before writing, so DwgWriter/DxfWriter emit the correct file
format. Also works in the unsaved-changes Save flow.
Closes#9
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Grip points in paper space now use the 2-D linear to_px transform
(tx/ty/ortho_size) instead of the 3-D view_proj matrix, matching the
coordinate system used by PaperCanvas
- world_offset is no longer subtracted from paper-space entity grip
positions — paper-space coordinates are already unoffset (same rule
as wire tessellation in wires_for_block)
- MTEXT v_offset corrected for all attachment points: CXF glyphs sit
on the baseline and extend upward, so Top attachment needs v_offset=-h,
Bottom needs (n_lines-1)*line_h, Middle is the midpoint of the two
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Opens a floating OS window when the user tries to close a dirty tab or
quit with unsaved changes. The main window stays alive until the dialog
is resolved — Cancel aborts the close entirely. For quit with multiple
dirty tabs the dialog loops through each one individually.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
paper_limits() can return a non-zero origin (e.g. when min_limits has
negative margin values). PageSetup was using x1/y1 directly instead of
(x1-x0)/(y1-y0), giving wrong dimensions in those cases.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Direct camera.orbit/pan/zoom calls in update.rs bypassed camera_generation
so the Tick handler never detected a change and never wrote the camera back
to the document. Add camera_generation += 1 after each navigation call.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- On file open and layout tab switch, restore the camera from the
document's saved view (*Active VPort for model space, sheet viewport
for paper space) instead of fitting to wire bounds.
- After any zoom/pan/rotate, write the new camera position back to the
document and mark the file dirty so it is saved with the file.
- Uses last_synced_camera_gen to avoid marking the file dirty on the
initial camera restore.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
The acadrust DWG reader never assigns a viewport id (always 0).
Some DXF exporters use id=-1 for all viewports. In both cases the
previous id > 1 check excluded every viewport from content rendering.
Replace is_user_viewport_id(id) with is_content_viewport(vp) that
uses a geometry heuristic for unknown ids (0 / negative):
- id=1 → always sheet viewport (excluded)
- id≥2 → always user viewport (included)
- id=0 or id<0 → sheet if center≈(0,0) AND scale≈1.0, else user
This allows DWG files and non-standard DXF files to display model
content inside their paper-space viewports and be entered via
double-click.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Two root causes prevented paper-space viewports from loading correctly:
1. acadrust's ViewportStatusFlags::from_bits() maps bit 0 → is_on, but
the real DXF/DWG spec uses bit 15 (0x8000) for "viewport on". Post-load
fixup in io/mod.rs now corrects this for both DXF and DWG files: when
bit 0 is clear but bit 15 is set, is_on is forced true and locked is
derived from bit 14 (0x4000).
2. Some DXF exporters write id=-1 for all viewport entities instead of the
standard id=1 (sheet) / id≥2 (user) convention. The is_user_viewport_id()
helper now treats any id ≠ 0 and ≠ 1 as a user viewport, covering both
the standard id≥2 and the non-standard id=-1 cases.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Entity grips() return world-space coordinates (raw DXF values). After
the world_offset change the camera view_proj is in local space, so
projecting world-space grips through it gave wrong screen positions and
hit-test failures.
- refresh_selected_grips: subtract world_offset from every grip.world
so selected_grips are stored in local (camera) space
- Grip drag: cursor/snap positions are already local space; for
GripApply::Absolute add world_offset back before passing to entity
so entity coordinates stay in world space. Translate deltas are
identical in both spaces so no conversion is needed there.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Subtracts the DXF header extents centroid (world_offset) from all coordinates
in f64 BEFORE casting to f32. This eliminates the ~0.5 m ULP error that occurs
at 4,000,000 m UTM coordinates and caused geometry to disappear on zoom-out.
- Scene: adds world_offset field + compute_and_set_world_offset() method
- tessellate.rs: threads world_offset through all f64→f32 conversions
(legacy_geometry, dimension_geometry, solid_wire_fallback, multileader)
- truck_tess.rs: to_local() helper already in place from prior session
- mod.rs: tessellate_entity() and entity_aabb() apply world_offset
- update.rs: compute_and_set_world_offset() called after doc load
- cmd_result.rs / solid3d_cmds.rs: pass correct offset to truck tessellators
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add `aabb: [f32; 4]` field to WireModel (world-space 2-D bounding box).
In tessellate_entity() set each wire's AABB from e.as_entity().bounding_box()
via new entity_aabb() helper; Insert sub-entities each get their own AABB.
Preview/interim wires and any entity returning a zero-extent default box get
UNBOUNDED_AABB so they are never pre-rejected.
Replace the chord-sphere heuristic in Snapper::wire_in_range() with a proper
AABB vs snap-circle overlap test. The new check is four scalar comparisons and
correctly handles closed curves (circles, arcs) which the chord-sphere approach
had to special-case.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Option I: add per-viewport Arc wire cache so paper-space viewport rendering
no longer re-tessellates model content every frame.
Option J: hit_test_wires() returns Arc<Vec<WireModel>> — O(1) pointer copy
in model space instead of a full Vec clone on every mouse move during commands.
paper_canvas_hatches/wipeouts() now route through the epoch caches added in F.
Option K: add world_snap_r + wire_in_range() pre-check to Snapper::snap().
All Endpoint/Midpoint/Nearest/Perpendicular/Intersection loops skip wires
whose chord sphere is outside the snap circle using O(1) scalar comparisons,
eliminating O(entities × vertices) matrix multiply cost when zoomed in.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add two complementary render caches that make mouse navigation essentially
free regardless of file size:
Option A – Wire tessellation cache: entity_wires_arc() caches the
tessellated Vec<WireModel> keyed by geometry_epoch and returns an Arc,
so navigation frames (no preview wires) incur zero Vec clones and zero
tessellation work. Primitive::wires changed to Arc<Vec<WireModel>>.
Option B – GPU buffer cache: Pipeline stores cached_epoch; prepare()
skips all upload_wires/hatches/images/meshes calls when the epoch is
unchanged, writing only the 192-byte camera uniform instead.
geometry_epoch is a process-wide AtomicU64 incremented by every Scene
mutation (add/erase entity, selection, layer visibility, layout switch,
populate_*, grip, transform, copy, clear, preview wires). Using a global
counter rather than a per-scene counter prevents two tabs that happen to
have the same local bump count from sharing a cached_epoch value, which
was causing the first file's geometry to remain on screen after opening a
second file.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
White paper fill was calculated from entity bounding boxes (paper_entity_extents),
so adding a viewport caused the paper to visually shrink to the viewport's bounds.
Now paper_limits() (layout min/max limits) is used directly, and the unused
paper_entity_extents() function is removed.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Make scene::properties::entity_type_name the single source of truth.
entity_type_label in helpers.rs now delegates to it instead of
maintaining a separate match list.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
The Properties panel header was still showing "Entity" for unrecognized
types because helpers.rs had its own incomplete match. Both functions now
enumerate every acadrust EntityType variant explicitly.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
NAVVCUBE: propagate show_viewcube flag through ViewportPane and the wgpu
Primitive so the ViewCube pipeline skips upload/render when hidden.
UCSICON: bare command (no subcommand) now toggles current state instead
of printing usage info.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Integrate NAVVCUBE, NAVBAR, PROPERTIES, FILETAB, LAYOUTTAB, TOOLPALETTES
and SHEETSET commands to toggle UI widgets at runtime. Add 15 new SVG icons
for view module tools previously using glyph fallbacks. Restyle all SVG
icons to use the established two-color scheme: #e0e0e0 for passive geometry,
#4cc9f0 for active/accent elements.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Hide OS crosshair and drawn crosshair when cursor is over ViewCube area
- Enhanced hover glow in WGSL shader (blue tint + brightness boost)
- Fixed region_centroids() Y-axis sign for all FRONT/BACK-related regions
- Swapped corner geometry assignments (TPF↔TBK, BTF↔BBK) to match
intended FRONT/BACK semantics (sy=-1 = FRONT, sy=+1 = BACK)
- Corrected all snap_angles: yaw_pitch_to_quat(0,0) places eye at -Y
(FRONT view), so FRONT=0 and BACK=PI — cascaded through edges/corners
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
acadrust initialises every Layout with 12×9 imperial defaults; override
all non-Model layouts to 297×210mm in new_drawing() so the first paper
tab opens at A4 size, consistent with layouts added later.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- paper_entity_extents() computes the bounding box of actual DXF entities
so the white fill always matches the drawn title-block / frame borders,
regardless of whether Layout min/max_limits match entity positions
- Falls back to paper_limits() (→ A4 297×210) when layout has no entities
- Removed paper_boundary_wire: the white fill now acts as the visual paper
edge so the near-white wire (invisible on white) was redundant
- LayoutCreate sets limits to A4 landscape immediately after add_layout()
to override acadrust's imperial default (12×9)
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- paper_limits() falls back to A4 landscape (297×210mm) even when no
Layout object exists in the document
- paper_bg_color default changed to white [1,1,1,1] (paper surface color)
- PaperCanvas::draw() fills canvas with dark desk color first, then draws
the paper area rectangle in paper_bg_color so the sheet is clearly
visible against the desk background
- view.rs container background uses the fixed desk color instead of
paper_bg_color so it no longer conflicts with the paper-surface color
- BACKGROUND RESET for paper space now resets to white instead of dark gray
- Removed unused PaperSheet variant, paper_sheet() constructor,
build_paper_sheet_primitive() and associated match arms (dead code
after 2D canvas replacement)
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- viewport_screen_rect now mirrors PaperCanvas::draw()'s camera-based
to_px transform instead of using a fixed paper-limits scale, so the
3D overlay lands exactly over the drawn viewport border at any zoom/pan
- blue border frame (stack layer above the shader) makes the active
viewport boundary always visible even when it fills the canvas
- space-mode pill in MSPACE now dispatches LayoutSwitch("Model") so
clicking it jumps to full Model Space instead of just exiting to PSPACE
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Paper space is now rendered as a 2D vector canvas (iced::widget::canvas)
instead of a 3D shader widget. This allows direct interaction with
paper-space entities (title blocks, viewport borders, annotations)
without needing to enter MSPACE first.
Changes:
- src/scene/paper_canvas.rs: new PaperCanvas<'a> canvas::Program that
renders paper wires (with linetype dashes), solid/gradient hatch fills,
and wipeout backgrounds using the paper camera's orthographic transform.
- Scene: three new public helpers (paper_canvas_wires, paper_canvas_hatches,
paper_canvas_wipeouts) feed the canvas with the same data the old shader
used, including inactive viewport projections and interim/preview wires.
- view.rs: paper_canvas_view() now wraps PaperCanvas instead of
shader(ViewportPane::paper_sheet(…)). The PaperViewportPane 3D shader
overlay for the active MSPACE viewport is unchanged.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Replaces the static MODEL/LAYOUT pill with an interactive button that
shows and toggles the current editing context:
Model tab → "MODEL" (non-clickable, informational)
Layout PSPACE → "PAPER" (click → MspaceCommand: enter MSPACE)
Layout MSPACE → "MODEL" (click → ExitViewport: return to PSPACE)
Highlights in blue when in MSPACE to signal active model editing.
Mirrors the AutoCAD status-bar convention for MODEL/PAPER switching.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
