Remove accidental dead code (unused imports, the superseded paste tool()
helper, a never-read TORIENT handles field, a duplicate let binding, an
unneeded mut) and mark intentional-but-unwired scaffolding with
allow(dead_code): the web-only save_to_bytes, the plugin loadable() probe,
the planned PICK_HIGHLIGHT colours, the DynFieldSpec label, and the layout
ribbon helpers. Native build is now warning-clean apart from the upstream
nom/quick-xml future-incompat notices.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The web save path discarded the chosen format version (`let _ = version`)
and `save_to_bytes` never applied it, so every browser download was
written at the document's default version (AC1032 / DWG 2018) regardless
of the format picked in the Save dialog. (#122)
Thread `version` into `save_to_bytes` and set `doc.version` there, the
byte-buffer counterpart to `save_as_version`. Saving as DWG 2013 now
writes an AC1027 file.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
On the web, Save and Save As now open the in-app Save dialog (filename +
format) like the desktop, and the unsaved-changes prompt's Save routes
through it too — instead of an immediate rfd download. Confirm serializes
to bytes and downloads directly via a Blob + hidden `<a download>` click
(a user gesture), so there is no intermediate "click to download" link.
Replaces the rfd-based download_web / WebSaveResult round-trip with a
synchronous sys::download_bytes. Native save is unchanged.
Native + web build; 75 tests pass.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Wire up save for the web build:
- `io::save_to_bytes`: serialize a document to a byte buffer (DXF via
write_to_vec, DWG via write_to_writer over a Cursor).
- `io::download_web`: browser save dialog → write bytes (triggers a
download).
- Save and Save As on wasm both go through a new `web_save` helper:
serialize the active tab and offer a download (no persistent path or
in-app save dialog on the web). Format follows the tab name's
extension, defaulting to DWG. Result reported via `WebSaveResult`.
Native build + 75 tests unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Wire up file open for the web build:
- `io::pick_and_load_web`: browser file picker → read bytes → parse via
`load_bytes` → build caches, returning the same payload as the native
loader so it feeds the shared `Message::FileOpened` handler.
- `Message::OpenFile` cfg-dispatches: native picks a path then loads on a
worker thread; web picks + parses in one async step. The web branch also
sets `opening` (the handler drops results when no open is in progress).
- Disable the cosmic-text shaping / fallback paths on wasm: the web has no
system fonts, so cosmic-text panics with "no default font found". LFF
stroke fonts (embedded) still render; LFF-missing glyphs are skipped.
Native build + 75 tests unchanged. Hatches still don't draw on the web.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
With the wasm bundle building, get it rendering in a browser:
- Enable iced `webgl` so wgpu uses WebGL2 where WebGPU is absent
(e.g. Firefox by default), and `fira-sans` so UI text has an
embedded font (the web has no system fonts) — without it every
label was blank.
- Replace `std::time::Instant` with `iced::time::Instant` (web-safe);
`Instant::now()` panics ("time not implemented") on wasm and crashed
at boot via the command line.
- Skip the batched-hatch pipeline on wasm: its bind group needs
vertex-stage storage buffers, which WebGL2 lacks (validation error
on "New drawing"). Fields become Option; upload/draw guard on them.
Hatches don't draw on the web for now; everything else does.
- Fix the trunk feature flag (`data-cargo-no-default-features`) and
ignore the `dist/` build output.
Native build + 75 tests unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Add a cross-platform `io::load_bytes(name, bytes)` that parses DWG/DXF
from an in-memory buffer via acadrust's stream readers (Cursor), picking
the format from the name's extension. This is the foundation for opening
files on the web, where the browser delivers bytes rather than a path.
Native keeps the streaming `load_file` (lower memory on large drawings);
both share the post-load fixups. Builds on native and wasm.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
wasm32 has no threads, so rayon's global pool would panic at runtime.
Add `crate::par::prelude`: native re-exports `rayon::prelude`, wasm
provides sequential `std`-iterator equivalents (par_iter / into_par_iter
/ flat_map_iter over slices, Vec, HashMap, HashSet). All call sites now
`use crate::par::prelude::*;` instead of rayon directly.
- wire_gpu's rayon `reduce` (2-arg, no std equivalent) is cfg-split to
a sequential flat_map concat on wasm.
- rayon moves to a non-wasm target dependency.
Native still runs in parallel; all 75 tests pass. wasm bin compiles.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
First step toward a web build: the library now compiles for
wasm32-unknown-unknown with --no-default-features.
- Add a `solid3d` feature (default on) gating truck-meshalgo /
truck-shapeops / lzma-sys. These pull vtkio → xz2 → lzma-sys (C),
which cannot cross-compile to wasm. Without the feature the 3-D
solid path (tessellation, booleans, ACIS import) becomes no-ops;
2-D CAD is unaffected. Native builds keep the feature by default.
- Move native-only crates (ureq, open) to non-wasm target deps and
add cfg shims: update-check is a no-op on wasm, and a new `sys`
module provides open_url + handle_path (rfd FileHandle → PathBuf;
synthesizes a name-based path on the web).
Native build + all 75 tests unchanged. Browser runtime wiring
(entry point, trunk, real file I/O) is a follow-up.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A RasterImage stores its path on the linked ImageDefinition, usually as the
original author's absolute path (e.g. a Windows/VMware share) that doesn't
exist locally, so the image silently failed to load. On open, resolve each
raster image: use the stored path if it exists, else fall back to the same
file name next to the drawing, and write the resolved path onto the entity.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
On the first launch that hasn't answered it yet, the app shows a small
dialog offering to become the default handler for .dwg and .dxf files.
The choice is persisted (default_assoc_prompted) so the prompt never
reappears.
The platform plumbing lives in io/file_association.rs:
* Windows — opens the OS's own per-app default-programs dialog via
IApplicationAssociationRegistrationUI::LaunchAdvancedAssociationUI,
passing the "Open CAD Studio" RegisteredApplications name the MSI
registers. Modern Windows guards the actual default behind a
UserChoice hash, so this is the supported consent path.
* Linux — xdg-mime default against the installed .desktop file, whose
MimeType entries already cover image/vnd.dwg and image/vnd.dxf.
* macOS — LSSetDefaultRoleHandlerForContentType binds the DWG/DXF UTIs
declared in Info.plist to the app bundle id.
The work runs on a dedicated thread (the Windows dialog is modal) with
the result delivered back through a oneshot channel and surfaced in the
command line.
https://claude.ai/code/session_01DFVSKgViFaxEjZD2KsTdtt
A 35-unit arc sweeping 6.5e-7 rad has arc length 2.3e-5 — past the
arc-length floor — yet start/mid/end bow off the chord by only ~2e-12.
truck's 3-point circle_arc fit then returns a near-infinite radius and
parameter_division subdivides without bound, hanging the load. Gate on
the sagitta (r·(1−cos(sweep/2))), the true measure of the fit's
conditioning, so long thin arcs survive and sub-precision ones drop.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
sample_layout_03/04.dwg would not open: a periodic 9-control-point spline
with every control point pinned at the origin (zero extent) reaches truck's
parameter_division, which never converges on a zero-length curve and hangs
the first-frame tessellation. The spline passed every existing guard
(finite points, no knots, degree 3). Reject splines whose control-point
extent is sub-precision (< 1e-6 on all axes).
Verified: all five sample_layout DWGs now load + tessellate (03/04 went
from a hang to ~356 ms; 01/02/05 unchanged, no valid spline dropped).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DWG stores the current text/dim/multiline style as a header handle; the
writer keeps a valid stored handle and otherwise falls back to Standard,
so a Set Current change (which only updates the name) was lost on DWG
save. Treat the current-style names as the source of truth and re-resolve
the header handles from them at save time, alongside the table/multileader
variable-dictionary sync. Now every current-style choice round-trips
through DWG, not just DXF.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
On save, mirror the current table/multileader style from the header into
the variable dictionary (CTABLESTYLE / CMLEADERSTYLE DICTIONARYVAR
entries) so a Set Current choice round-trips through DWG, which stores
them there rather than in the header. Done once in save_as_version (the
shared clone point), so every save path and both formats stay in sync.
No-op when the document has no variable dictionary (fresh files).
Verified: mutate the entry, write+read a real DWG, value survives.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DWG has no header field for the current table / multileader style — they
live in the variable dictionary as DICTIONARYVAR entries keyed CTABLESTYLE
/ CMLEADERSTYLE. Resolve them on load via the document's dictionaries and
set the header names, so the green ✓ marks the right style for DWG files
as well (DXF already worked via the header vars). A missing entry leaves
the value untouched, so there is no risk to the binary header parse.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- The current-style marker is now a green ✓ in its own fixed-width column
so names stay aligned; rendered as a separate coloured glyph rather than
baked into the label string.
- Resolve the current text / dimension / multiline style from the handle
the DWG header stores into the name the app reads (fix_current_style_names
on load). DXF already provides these as names ($TEXTSTYLE / $DIMSTYLE /
$CMLSTYLE); DWG only stores handles, so the marker previously always fell
back to "Standard". Only overrides when the handle resolves.
Note: table and multileader current styles are not surfaced by the file
reader (no header name/handle exposed), so those markers still default to
the app's active selection until acadrust exposes them.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Large survey drawings (105k entities, multi-million unit extents) could
exhaust all RAM + swap on one core during load and get OOM-killed before
display. Two parser-garbage entities slipped past the corrupt-entity
purge and blew up truck's parameter_division tessellation:
- Near-zero-sweep arcs: the zero-sweep guard only caught sweep < 1e-9,
but a tiny non-zero sweep (e.g. 1.6e-6 rad) still places start/mid/end
within truck's coincidence tolerance and recurses unboundedly. Gate on
arc length (radius x sweep) instead so large-radius small-sweep arcs
(still visible curves) survive while sub-precision arcs drop.
- Desync splines with 100k control points and an invalid knot vector had
no guard at all. Add a Spline arm rejecting the 100k desync signature,
non-finite control points, degree < 1, and bad knot vectors.
Also cap complex-linetype dash expansion (complex_lt::apply_along) at
1e6 pattern repeats, falling back to a solid stroke — a latent OOM of
the same class on map-scale entities carrying a finely-scaled pattern.
Adds regression tests for the arc-length and spline guards.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
New layers were added to the table with a NULL handle, and the first
patch used the non-advancing `next_handle()` getter, so two new layers
(or a layer and the next allocated object) shared one handle. The DWG
format is handle-based, so the collision dropped the layer on save;
DXF is name-based and survived, which is why a rename appeared to fix
it.
Allocate a unique advancing handle via `allocate_handle()` in LAYER NEW
(panel + command line) and on rename when the source handle is invalid.
Rename now also clones the whole record so colour/linetype/lineweight
are kept, not just the flags.
Adds DWG/DXF round-trip tests covering one and multiple new layers.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The purge scan tests every entity with is_entity_corrupt, whose
per-vertex finite/extent checks on large polylines dominate. Detection
is pure and read-only, so gather entity refs in one pass and test across
cores with rayon; removal stays serial (remove_entity needs &mut doc).
Cuts the "purge" span in the open-time breakdown on polyline-heavy files.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Phase 5.2. Time each open phase — parse, purge, derived-cache build on
the loader thread, plus xref resolve on the UI thread — and emit a
breakdown line on open completion:
parse 1240ms · purge 80ms · caches 340ms · xref 60ms · total 1820ms
Makes open-time regressions (and the wins from 1.1 / 2.4) visible at a
glance. Timings ride back on DerivedCaches; total is wall time from the
Open click to post-xref.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Phase 1.1: resolve_xrefs now purges corrupt entities inline as it
merges each xref and returns the dropped count, removing the second
full-document purge_corrupt_entities walk in the FileOpened handler.
Every xref-bearing open saves one O(N) entities() pass.
Phase 2.4: split compute_world_offset into offset_prep / offset_centroid
/ world_offset_from_centers; centroid accumulation now rides the existing
cache-handle walk in build_derived_caches. Two O(N) entity walks collapse
into one, with identical MSPACE-membership filtering preserved.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Adds vertex-coordinate, thickness, and dimension-validity checks to
`is_entity_corrupt`. Sample files with degenerate Arcs (radius ~5e-14
and zero sweep) or 100k-vertex LwPolylines at coords ~1e244 used to
pass the previous check, then crash inside truck's parameter_division
with a 3 GB allocation.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
acadrust's DWG reader occasionally desynchronises on certain files
(observed on render.dwg: 1519 of 1763 LwPolylines arrived with non-unit
normals in the 1e200+ range and 100k phantom vertices). Tessellating
those entities allocates gigabytes and produces NaN-laden wires,
freezing the UI.
Add a pre-tessellation guard that scans freshly loaded documents and
drops any entity failing a cheap sanity check: non-unit normal,
non-finite or absurd coordinate, or vertex count above 100k. Count of
dropped entities is threaded through DerivedCaches and surfaced as a
warning in the command line so the user knows the file was patched up
on the way in.
Same file in DXF form parses cleanly (0 corrupt), so this is strictly
a DWG-path workaround until the upstream parser bug is fixed.
The new examples/inspect_polyline.rs is a one-off diagnostic that dumps
LwPolyline/Polyline2D/Polyline3D fields plus a corrupt-entity count;
useful for narrowing down the acadrust bug.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Big DWG/DXF files block the UI for seconds during parse + cache build,
leaving the user wondering whether the app froze. Split the file-open
flow into pick → load and show a modal overlay during the load: file
name, size, phase label (Reading / Parsing / Building caches /
Finalizing), animated indeterminate bar, and Cancel button.
Phase is tracked via a shared AtomicU8 written by the loader thread
and read by the overlay each frame. Cancel hides the overlay and
discards the result; the parser thread runs to completion in the
background since acadrust has no interrupt hook.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Parsing + DerivedCaches construction now runs entirely in a dedicated
OS thread inside open_path(). FileOpened handler only assigns the
pre-built caches, keeping the UI thread free during file load.
- Add build_derived_caches(): parallel hatch + mesh tessellation via rayon
- Extend Message::FileOpened / open_path return type with DerivedCaches
- Drop populate_*_from_document() calls from FileOpened handler
OLE2Frame: full TruckConvertible/Grippable/PropertyEditable/Transformable
impls in src/entities/ole2frame.rs — grips on corners + center, properties
panel, translate/scale transforms.
Shape: rotation (DXF code 50) now converted degrees→radians on load in
fix_dxf_dimension_rotations(), matching Dimension and Attribute behaviour.
All ❌ gaps resolved. Remaining: Viewport GPU scissor, LWPolyline plinegen.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Implements a full in-app file browser window for Save As, replacing the
rfd dialog that could not expose the selected filter index on Linux.
The new chooser includes directory navigation, a scrollable file list,
filename input, and a format drop-down (DWG/DXF × 2018/2013/2010/2007/2004/2000/R14).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
rfd does not expose the selected filter index, so the old DWG/DXF version
filters had no effect — every file was always saved as AC1032 (R2018).
Replace with a single custom iced Save As window that shows:
- File name text input
- Save-in folder input + Browse button (rfd folder picker)
- Format dropdown: DWG/DXF × 2018/2013/2010/2007/2004/2000/R14
- Save / Cancel buttons
The selected format is passed to save_as_version() which temporarily sets
doc.version before writing, so DwgWriter/DxfWriter emit the correct file
format. Also works in the unsaved-changes Save flow.
Closes#9
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Two root causes prevented paper-space viewports from loading correctly:
1. acadrust's ViewportStatusFlags::from_bits() maps bit 0 → is_on, but
the real DXF/DWG spec uses bit 15 (0x8000) for "viewport on". Post-load
fixup in io/mod.rs now corrects this for both DXF and DWG files: when
bit 0 is clear but bit 15 is set, is_on is forced true and locked is
derived from bit 14 (0x4000).
2. Some DXF exporters write id=-1 for all viewport entities instead of the
standard id=1 (sheet) / id≥2 (user) convention. The is_user_viewport_id()
helper now treats any id ≠ 0 and ≠ 1 as a user viewport, covering both
the standard id≥2 and the non-standard id=-1 cases.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Polyline3D tessellation now separates spline-fit curve vertices (flag 8)
from frame control points (flag 16): the curve vertices form the rendered
wire while control points are exposed as key_vertices for snap. Polylines
without spline flags are unchanged.
DXF post-load fixup now also converts AttributeEntity and AttributeDefinition
rotation from degrees to radians (group code 50 bug), matching the existing
LinearDimension fix. Attribute text rendered from DXF files now has correct
orientation.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
append_linear_dimension() applied the same perp offset to both d1 and d2,
but only d2 is guaranteed to be at the definition_point level; d1 must be
projected independently onto the dimension line, otherwise non-collinear
first/second points produce a parallelogram instead of a rectangle.
Fix: compute dim_line_pos = def.dot(perp) and project each endpoint
separately so the dimension line is always parallel to axis.
Additionally, the acadrust DXF reader stores LinearDimension.rotation from
group code 50 (degrees) without converting to radians, while DWG and our
own annotation commands store it in radians. Add a post-load fixup in
load_file() that converts the rotation to radians for DXF files so
tessellation can call cos/sin uniformly.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Adds STEPOUT / STPOUT / EXPORTSTEP command that exports all tessellated
Solid3D / Region / Body meshes to an ISO 10303-21 (STEP AP203) file.
Each triangle is encoded as a minimal ADVANCED_FACE with a PLANE surface
and CLOSED_SHELL topology — sufficient for import into all major CAD systems.
A file-save dialog picks the output path; the command line reports success or
errors. Requires at least one tessellated solid in the drawing.
Closes ROADMAP 14.10.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
The PRINT command renders the current layout to a temporary PDF (reusing
the existing PDF export pipeline) and dispatches it to the OS default
printer:
- Linux/macOS: `lp` (CUPS) with `lpr` as fallback.
- Windows: ShellExecute "print" verb (compiled-in, unused on Linux).
PLOT and EXPORT still open the save-file dialog as before.
Status messages are shown in the command line during the async job.
Closes ROADMAP 1.8.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Parses Wavefront OBJ files (v/vn/f, fan-triangulation, face normals
fallback) and inserts the result as a Solid3D placeholder + MeshModel
visible in the 3D viewport.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Exports all tessellated 3D mesh models in the current drawing to a
binary STL file via a save-file dialog. Normals are taken from the
MeshModel where available, otherwise computed from triangle vertices.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- src/io/plot_style.rs: PlotStyleTable and PlotStyleEntry data structures;
CTB reader (deflate/zlib decompressed text format) with ACI→RGB and
ACI→lineweight lookup; CTB writer (zlib compressed); LW_TABLE constant
- src/io/pdf_export.rs: accept optional PlotStyleTable; apply ACI color
and lineweight overrides during PDF rendering
- src/scene/wire_model.rs: add `aci: u8` field to carry ACI index
- src/scene/render.rs: render_style() now returns ACI alongside RGBA
- src/scene/mod.rs + tessellate.rs: propagate aci through wire building
- app: PlotStyleLoad/Loaded/Clear messages and handlers;
PLOTSTYLE LOAD | CLEAR | STATUS command; active_plot_style state on H7CAD
- flate2 added as dependency
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Add printpdf 0.9.1 dependency for native PDF generation.
- New src/io/pdf_export.rs: converts paper-space WireModels to a PDF
page (per-wire stroke color, line weight in Pt, NaN-split segments).
White/near-white colors are inverted to black for print output.
- Add PlotExport / PlotExportPath messages: opens a save-file dialog
and writes a .pdf next to the drawing file.
- Add PageSetupOpen/Close/WidthEdit/HeightEdit/Commit messages: a
centered modal panel lets the user enter paper width and height (mm);
on commit the Layout object's min/max_limits are updated in-place.
- Register PRINT / PLOT / EXPORT and PAGESETUP (PS) commands in
dispatch_command; fix MVIEW error message to English.
- Layout ribbon gains a "Plot" group with Page Setup and Export PDF
ribbon buttons.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
