The ViewCube, the UCS icon, its at-origin placement and selection cycling all
have commands and status-bar pills, and all four kept their value only on the
app struct. Turn the ViewCube off with NAVVCUBE, restart, and it is back.
Nothing failed — the setting evaporated — so a checkbox for any of them would
have been a checkbox that forgets. They are persisted first, with a
round-trip test, and only then given controls.
The new 3D Modeling page carries the three view tools plus the drawing
variables that decide how solids are tessellated: ISOLINES, DISPSILH, SURFU,
SURFV, SURFTYPE, SOLIDHIST and SHOWHIST. Those are saved in the DWG rather
than in preferences, so the page says so beside each group and hides them
entirely when no drawing is open.
Changing them also rebuilds the geometry. The SETVAR path never did, which is
why the comment beside LTSCALE's invalidation exists — the same reasoning
applies here, and without it a new isoline count does not appear until some
unrelated edit rebuilds the solid.
Selection cycling joins the Selection page next to the other two selection
modes, since that is what it is.
Co-Authored-By: Claude Opus 5 <[email protected]>
Two drafting preferences had no proper home. The Drafting Settings dialog
displays the drafting rotation and offers only a Reset button — there was no
way to type an angle short of `SETVAR SNAPANG`. The polar tracking increment
existed in exactly one place: a pop-up hanging off the status-bar pill.
The rotation is a text field over an edit buffer rather than the value
itself, so clearing it to retype does not snap the crosshair to zero on the
way through; the buffer is reseeded whenever the value is restored from
behind it. Angles render without a trailing `.0`, matching how the polar
pop-up has always shown them — same kind of number, same reader.
Snap modes, grid spacing and object snap stay in Drafting Settings, where
they belong; the page links to it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Zoom direction and factor, whether TEXTEDIT ends after one object, whether
continued dimensions inherit the base dimension's style, which points QDIM
measures from, and which annotative objects pick up a newly set scale. All
six work today; none had a control.
Two of them needed their meaning worked out rather than copied.
ANNOAUTOSCALE stores the mode in the magnitude and on/off in the sign, and
the four modes are not documented anywhere in the app — the command prompt
just says `[-4..4]`. Reading `add_annotation_scale_to_objects` gives them:
1 skips layers that are off, frozen, locked or frozen in the viewport, 2
keeps the locked ones, 3 skips only locked, 4 takes everything. The dropdown
names them instead of showing bare numbers, and choosing Off negates rather
than zeroing, so the mode survives being switched off and back on — which is
the convention the status-bar pill already follows.
The QDIM origin priority had no system variable at all; it could only be
reached through a keyword inside the running command.
Drawing units stay in their own dialog; this page links to it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Three settings that work, persist, and could only be reached by typing their
name: TEXTFILL, CLIPROMPTLINES and COMMANDLINEFADETIME. The last two govern
how much of the command window is prompt and how long its history lingers —
the kind of thing people fiddle with once and then leave, which is exactly
what a settings dialog is for.
One fix rides along. TEXTFILL is a process-global, so changing it invalidates
the text in every open drawing; the SETVAR path rebuilt only the active tab,
leaving the others rendering the previous setting until an unrelated edit
happened to rebuild them. Both paths now go through
`invalidate_text_everywhere`, so the checkbox and the command cannot disagree.
Co-Authored-By: Claude Opus 5 <[email protected]>
General had become three unrelated controls: a language picker, a save format
and a file association. The last two move to an Open and Save page, where
they join the two saving preferences that have never had a widget.
Automatic save has worked since the SAVETIME command was added and is
persisted; the only way to change the interval was to type it. Same for the
`.bak` copy from #205 and its ISAVEBAK command. Both are settings people
expect to find in a dialog, and neither was in one.
The page also carries a button through to the Plot dialog. Options holds the
preferences; the plot device, paper and plot styles stay where they already
work well. Note that the modal stack shows one dialog at a time, so the
button replaces Options rather than stacking on it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <[email protected]>
Add the typed document facade and plugin IPC adapter. Prepare bulk edits
before mutation, preserve undo and dirty state, keep profile elevations,
validate numeric inputs and session bindings, and generate Python constructors
with typed results.
Reuse existing entity transforms and profile conversion. Compute mass
properties and closed-surface bounds in cadkernel; pin its main revision
6a5e6fc2822f6af6b2611cd605b44437b35158f0. Keep plugin API metadata at version 6.
Validation: 646 native application tests, 597 kernel tests, 12 document API
tests, 91 plugin API tests, 3 Python tests, default/IPC feature builds and
wasm32 check passed.
Delete the thin re-export file; src/app/doc_api.rs now uses ocs_doc_api::convert
directly (use ocs_doc_api::convert + convert::* call sites). Remove the
mod doc_api_convert registration from src/app/mod.rs.
The conversion logic already lives in the crate (src/convert.rs) from the prior
move; the shim was redundant. 623 host lib + 38 doc_api tests green.
Switching to a Layout stops the main thread long enough that the
compositor decides the application has stopped responding and offers to
kill it. The switch itself is not the problem — `layout-switch` reports
about 10 ms — it is the frame after it, which rebuilds the whole wire set.
That frame now has a cheap one in front of it. `layout_settling` is set
when the switch takes, and while it holds, the viewport is replaced by a
centered "Preparing layout…" on the canvas background. No shader widget
means no scene primitive, so `prepare` has nothing to do and the frame
costs nothing. A `window::frames` subscription clears the flag, which is
the guarantee this needs: that callback runs once a frame has actually
been presented, so the notice is on screen and the compositor has been
answered before the expensive frame starts.
The deferral is of the *frame*, not the switch. Two callers depend on the
switch having completed when it returns — one calls `fit_all` immediately
after, another compares `current_layout` — so deferring the switch itself
would have broken both.
This restarts the compositor's timer immediately before the slow frame and
replaces a stale window with something that says what is happening. It
does not make the slow frame fast: if the rebuild still exceeds the
compositor's timeout the dialog can return, and the durable fix is the
2 s `memo_miss` behind it, which is a separate change.
Only `en-US` is validated against at build time; Greek is filled in too
since it is in use here, and the rest fall back until translated.
Co-Authored-By: Claude Opus 5 <[email protected]>
Reuse the application library from the binary entry point instead of compiling the module tree twice. Keep desktop-only transports and caches out of web builds, remove unused test code, and check executable targets in CI.
Model space appearance now follows the active UI theme instead of a
hardcoded dark background. Canvas mode is user-selectable (Match Theme /
Classic CAD Dark / Custom RGB), with matching controls for the paper
sheet and desk surround backgrounds and grid opacity.
Implements industry-standard CAD system variables, all settable via
command name, SETVAR, and the Options dialog:
- COLORTHEME (0/1 dark/light UI scheme, preserves custom palettes)
- COLORSCHEME (interactive named-theme selection)
- BACKGROUND (THEME/CLASSIC/DEFAULT/DESK presets, RGB triplets)
- SELECTIONAREA, SELECTIONAREAOPACITY (translucent marquee fill)
- WINDOWSAREACOLOR/WINDOWAREACOLOR, CROSSINGAREACOLOR (ACI or theme)
- SELECTIONEFFECT, SELECTIONEFFECTCOLOR (GPU highlight pass, driven by
selection_generation invalidation — no retessellation)
- SELECTIONPREVIEW (bit 0 = idle rollover, bit 1 = in-command hover)
- GRIPSIZE, GRIPCOLOR, GRIPHOT, GRIPHOVER (grip overlay styling)
- Implement `TABLEDIT` command supporting viewport point-picking on cell interiors
- Support overlapping table hit testing with selection cycling and top-table resolution
- Support `/n` and `\n` multiline paragraph breaks (`\P`) in table cell text editing
- Unify text input modes via `InputKind` (`Point`, `SingleToken`, `FreeText`) on `CadCommand`
- Migrate 15+ commands across annotate, draw, insert, layout, and view modules
- Preserve text casing, literal spaces, and bypass arithmetic eval during FreeText input
- Add dedicated `tabledit_tests` and `free_text_entry_tests` test suites
Replace manual key entry with per-row capture cells: clicking + Add
inserts a draft row at the top with its key cell armed, and the next
key combination is recorded and normalized (Ctrl+Shift+S →
CTRL+SHIFT+S). While armed, a dedicated keyboard listener swallows all
input so recorded shortcuts do not execute in the drawing.
Draft rows are transient and confirmed only through an explicit accept
button, so the table never retains empty rows. Duplicate keys and
unrunnable commands are flagged in danger styling with a persistent
warning naming the conflicting command. Added reset-to-defaults with
confirmation, apply-and-exit, a shortcut count, and an unsaved-changes
guard on close.
Keep hidden pre-drag geometry out of snap candidates and avoid empty
scene invalidations. Require stable OTRACK dwell observations and cache
planar-solid visibility during live previews.
Refs #930
Sync current main and companion codec changes before preserving unsupported frame rows, rendering in the entity plane, and sharing final layout metrics with placement preview.
