MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Typed values were quantized to the f32 grid before reaching the
entity (e.g. a length of 2000.8 committed as 2000.8020), worsening
with magnitude. The interaction point layer was all glam::Vec3 (f32).
Two-layer fix:
1. Coordinate backbone -> f64. last_point, last_cursor_world,
dyn_anchor, dyn_ref become DVec3; UcsXform transforms, parse_coord,
the ucs helper fns, dyn_resolve_point, the OTRACK typed-distance
paths, command-line coordinate entry and the coordinate readout all
compute in f64. Screen/GPU/alignment stays f32 (snap engine, render
geometry, projection, UCS-icon/viewcube drawing) with casts only at
those boundaries.
2. Per-command committed storage -> DVec3. on_point already received a
DVec3, but many command impls narrowed it back to f32 (let pt =
pt.as_vec3(); Vec<Vec3> fields) and re-widened at build, quantizing
the committed coordinate. Migrated PLINE, SPLINE, MLINE, LENGTHEN,
INSERT, 3D primitives, every dimension/leader/mleader, ray, revcloud,
wipeout, attdef, table, tolerance, array center, mview, plot_window,
plus the QDIM_PLACE handler and qdim_collect_points. Preview,
hit-test and rubber-band paths keep f32 at the boundary.
Hatch manual boundaries are left for a follow-up: HatchModel.boundary
is structurally Arc<Vec<[f32;2]>> and needs a model-level widen.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Batch 1-3 of the dimension audit (19 issues). The dominant class was the
baked *D block diverging from the live render: a reloaded dimension renders
from that block, so on save+reopen it silently changed.
Bake now matches the live render:
- text value/format via the shared style-resolved path (DIMDEC/DIMLFAC/
DIMPOST/units/<>), correct height + rotation ladder, suppression
- angular dims bake their swept arc (no longer collapse to a V)
- diameter draws edge-to-edge through the centre (live + bake), centre mark
- radius/linear/aligned bake arrowheads
- group-10 (base.definition_point) synced from the edited geometry so an
edited dim no longer shifts on reload
Editing / properties:
- aligned no longer corrupts ext_line_rotation when a coordinate is edited
- DIMTEDIT pins the moved text (text_user_positioned)
- angle properties shown/edited in degrees
- non-linear text respects the user-positioned gate
Commands / geometry:
- DIMBASELINE stacks outward (not toward the points) and its preview no
longer tilts over non-level points
- DIMCONTINUE/DIMBASELINE inherit the base dim's text rotation (UCS chains)
- angular extension lines reach the arc (no gap)
- text grip sits on the text for auto-placed dims instead of the origin
Refs #181. (acadrust DXF round-trip + QDIM/DIMBREAK/DIMJOGLINE/DIMSPACE/
DIMEDIT to follow.)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The continued dimension line was positioned with an offset measured from
the base dimension's *first* extension origin, then re-applied to each new
chain point (the previous dim's second origin). When the two extension
origins sat at different perpendicular positions — i.e. the extension
lines had different lengths — that offset placed the new dim line at
`D + (p2 - p1)·perp` instead of the base line's `D`, so the chain drifted
off the base line. Equal-length extension lines have `(p2 - p1)·perp = 0`,
which is why it only misbehaved sometimes.
Store the base dim line's absolute perpendicular coordinate and project
each extension origin onto it, so the whole chain stays collinear
regardless of extension-line lengths. The preview uses the same
projection.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Whole command/snap/grip/cursor chain now builds on f64 DVec3 end to end,
so picked points, snaps and grip drags stay precise at UTM-scale
coordinates instead of quantizing to ~0.5 m through f32.
- All ~80 command files migrated: draw (line/circle/arc/ellipse/shapes
in full f64; others via point methods), modify, annotate, insert, view,
inquiry, layers, groups, clipboard, layout.
- Entity apply_grip impls updated for GripApply::{Absolute,Translate}(DVec3).
- Construction sites (EntityTransform/CmdResult/DynAnchor) emit DVec3;
wire-preview boundaries cast to f32 only at the GPU edge.
- Modify/annotate commands keep internal Vec3 geometry where precision is
non-critical, casting at the DVec3 boundary; key draw commands store f64.
Builds clean (no warnings). Visual verification of crosshair/snap/grip at
extreme UTM zoom pending.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
New annotations now place their text and reading geometry along the
active UCS X axis (identity = world), so they read square to the user's
coordinate system instead of world-horizontal:
- TEXT / MTEXT: rotation defaults to the UCS X angle
(DocumentTab::ucs_rotation_angle, model space only).
- Linear dimensions: measure along the UCS axis the span is nearest, and
bake the UCS X angle as the text rotation so the value reads square
even under a style that forces horizontal text. DIMCONTINUE / DIMBASELINE
derive their axis from the base dim's rotation (any angle), not a
world H/V test.
- LEADER: the MText annotation rotates to the UCS, and the hookline runs
along the leader's horizontal_direction (set to UCS X), used by the
renderer instead of world horizontal.
- MLEADER: context.text_direction = UCS X drives both the text rotation
and, in the renderer, the text side and dogleg/landing direction.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Type-as-you-go suggestion popup above the input that filters known
command names by substring (so `LEADER` surfaces both LEADER and
MLEADER). Up / Down navigates the list, Enter dispatches the
highlighted entry, clicking a row dispatches directly. Esc on a
non-empty input clears the buffer instead of escalating to
command-cancel.
The name corpus comes from `inventory::submit!` blocks placed next
to each `CadCommand` impl rather than a hand-maintained static list.
Adding a new interactive command means dropping one `inventory::submit!`
line in its own module file — the autocomplete picks it up at the
next compile. 98 submissions seeded across 60 module files;
`command::all_registered_command_names()` flattens them at runtime.
One-shot dispatch arms in `app/commands.rs` (NEW, OPEN, SAVE, UNDO,
…) don't have a `CadCommand` impl and are therefore absent from
autocomplete by design.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Viewport-projected wires now clip at pixel level to their viewport boundary.
- WireModel.vp_scissor: Option<[f32; 4]> — paper-space bbox set on projection
- WireGpu.vp_scissor carries it through to the draw loop
- Pipeline.compute_wire_scissors() converts paper→NDC→pixel each frame
- render() calls set_scissor_rect() per wire, reset after viewport group
- INTEGRATION_GAPS.md: Viewport ⚠️ → ✅, all 51 gaps resolved
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add `aabb: [f32; 4]` field to WireModel (world-space 2-D bounding box).
In tessellate_entity() set each wire's AABB from e.as_entity().bounding_box()
via new entity_aabb() helper; Insert sub-entities each get their own AABB.
Preview/interim wires and any entity returning a zero-extent default box get
UNBOUNDED_AABB so they are never pre-rejected.
Replace the chord-sphere heuristic in Snapper::wire_in_range() with a proper
AABB vs snap-circle overlap test. The new check is four scalar comparisons and
correctly handles closed curves (circles, arcs) which the chord-sphere approach
had to special-case.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
