Batch 1-3 of the dimension audit (19 issues). The dominant class was the
baked *D block diverging from the live render: a reloaded dimension renders
from that block, so on save+reopen it silently changed.
Bake now matches the live render:
- text value/format via the shared style-resolved path (DIMDEC/DIMLFAC/
DIMPOST/units/<>), correct height + rotation ladder, suppression
- angular dims bake their swept arc (no longer collapse to a V)
- diameter draws edge-to-edge through the centre (live + bake), centre mark
- radius/linear/aligned bake arrowheads
- group-10 (base.definition_point) synced from the edited geometry so an
edited dim no longer shifts on reload
Editing / properties:
- aligned no longer corrupts ext_line_rotation when a coordinate is edited
- DIMTEDIT pins the moved text (text_user_positioned)
- angle properties shown/edited in degrees
- non-linear text respects the user-positioned gate
Commands / geometry:
- DIMBASELINE stacks outward (not toward the points) and its preview no
longer tilts over non-level points
- DIMCONTINUE/DIMBASELINE inherit the base dim's text rotation (UCS chains)
- angular extension lines reach the arc (no gap)
- text grip sits on the text for auto-placed dims instead of the origin
Refs #181. (acadrust DXF round-trip + QDIM/DIMBREAK/DIMJOGLINE/DIMSPACE/
DIMEDIT to follow.)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The core ribbon registry no longer needs build-time generation. Replace
the generated all_modules() (included from OUT_DIR) with a hand-written
static list in src/modules/registry.rs, listing the seven built-in tabs
in display order.
Trim build.rs down to its only remaining job: embedding the Windows
executable icon via winresource (issue #107). The external plugin system
is unaffected — plugin::registry still appends dynamically-loaded add-on
tabs on top of the core list.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- Delete src/modules/draw/modify/extend.rs (a 1-line placeholder with no
tool()/logic; `extend::` was referenced nowhere) and its `mod extend;`.
- Flatten single-file module dirs to the modern flat style:
src/command/mod.rs -> src/command.rs, src/snap/mod.rs -> src/snap.rs.
Parent `mod command;`/`mod snap;` are unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DistCommand stored the first point as Vec3 and ran on_point through
`let pt = pt.as_vec3();`, downcasting the f64 picked point to f32 before
computing distance/deltas. At survey-scale coordinates (eastings ~5e5)
f32's 24-bit mantissa gives ~0.03–0.06 unit resolution, so a snapped
endpoint measured slightly off — matching the report in #193.
Store `first` as DVec3 and keep the math in f64; cast to f32 only for
the visual preview wire vertices.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
TRIM ignored circles: the target dispatch handled Line/Arc/Ellipse/
Spline/Ray/XLine/LwPolyline but had no Circle arm, so clicking a circle
fell through to a no-op. Add `trim_circle()` — a full circle needs ≥2
boundary crossings; the arc segment under the click is removed and the
circle becomes a single Arc (center/radius/thickness/normal preserved).
Wire it into both the pick (apply) and hover-preview paths.
Also fix `arc_pts`, which emitted points as [x, y, cy+r·sin] — the XZ
plane — so arc and circle previews drew in the wrong plane (obvious on a
full circle). Match the XY convention used by line_pts and fillet's
arc_pts: [cx+r·cos, cy+r·sin, z]; callers now pass center.z.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A DWG DIMENSION references an anonymous *D<n> block that holds its drawn
geometry; AutoCAD-family readers render that block rather than re-deriving it
from the definition points. OCS re-tessellates dimensions for display and never
materialises the block, so on save a created dimension goes out referencing a
block that doesn't exist and the writer emits a null block handle. Strict
readers (DWG TrueView, QCAD) then drop the dimension or demand a recovery, and
lenient ones (BricsCAD) regenerate it at a different position.
Add bake_dimension_blocks(), called on the cloned document in
io::save_as_version / save_to_bytes, which builds a *D<n> anonymous block from
each block-less dimension's exploded geometry (extension lines + dimension line
+ measurement text) and points its block_name at it. Dimensions that already
own a block (imported, or copied via the *D-cloning copy path) are left
untouched.
Verified end-to-end: before, AutoCAD/Civil 3D 2026 reads 0 dimensions from an
OCS-saved file; after baking it reads all of them.
Fixes#178, #181, #182.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
ROTATE's reference-point step prompts "or skip: type angle directly", but
on_text_input only handled the later Angle step. So picking a centre and
typing the angle did nothing, and the next Enter cancelled the command —
the objects never rotated, which reads as the rotate "erasing" / losing
them.
Accept a typed angle at the reference-point step too, rotating directly
about the centre (the reference point stays optional). Added an automation
regression test that rotates a line 90° with centre + angle only.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The continued dimension line was positioned with an offset measured from
the base dimension's *first* extension origin, then re-applied to each new
chain point (the previous dim's second origin). When the two extension
origins sat at different perpendicular positions — i.e. the extension
lines had different lengths — that offset placed the new dim line at
`D + (p2 - p1)·perp` instead of the base line's `D`, so the chain drifted
off the base line. Equal-length extension lines have `(p2 - p1)·perp = 0`,
which is why it only misbehaved sometimes.
Store the base dim line's absolute perpendicular coordinate and project
each extension origin onto it, so the whole chain stays collinear
regardless of extension-line lengths. The preview uses the same
projection.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DIMALIGNED's drag preview never matched where the dimension landed. The
preview offset the dimension line in the XZ plane while the committed
entity's renderer offsets in the XY plane, and the commit path passed the
straight-line p2→cursor *distance* to `set_offset`, which re-applies it
along the perpendicular — wrong distance, always on the +perp side. Both
now store the cursor as the definition point and project it onto the
XY-plane perpendicular, matching the renderer and DIMLINEAR.
The same XZ-vs-XY plane confusion affected other annotate commands:
- DIMORDINATE worked entirely in the XZ plane (dropping the Y coordinate)
and left `definition_point` at the origin, so the leader kinked through
(0,0,0). Reworked onto the XY plane with a proper orthogonal elbow and a
live preview that matches the placed entity.
- DIMTEDIT / DIMJOGLINE cursor markers were built in the XZ plane, so in
the top-down view they collapsed to a flat line instead of a box /
zigzag. Rebuilt in the XY plane.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Bare `UCS` now enters an interactive front-end (UcsCommand) that gathers the
option then its value as separate steps, instead of the command line
submitting `UCS` alone on the first Space. The front-end delegates execution
back to the existing inline `UCS <option> …` handler via a new
`CmdResult::Dispatch(String)`, so the coordinate-system math and the
save/persist path are untouched.
Now `UCS Z 90` works the same from the command line (Space-separated),
headless automation, and any source that feeds the active command — closing
the input half of #169. Inline `UCS Z 90` (one-shot / paste) still hits the
inline handler directly.
Second phase of routing input sources through the unified step driver: the
interactive command is driven by feed_command like any tool. Adds headless
test ucs_interactive_inline_args.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
OFFSET derived the side from the first segment alone: which half-plane of
that edge's infinite line the pick fell on. For a closed loop that misreads
a pick placed beside the shape — outside the loop yet on the inner side of
the first edge's line — so a counter-clockwise rectangle (RECTANG's winding
when dragged bottom-left to top-right) offset outward by a side pick
collapsed inward instead.
Decide the side for a closed polyline with a point-in-polygon test mapped
through the loop winding (left normal points inward for a CCW loop): inside
→ inward, outside → outward, regardless of winding. Open paths keep the
first-segment heuristic. Adds a regression test covering both windings and
both directions.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Computed snaps (midpoint/nearest/perpendicular/intersection/extension/
apparent/grid) reconstructed the snap point from f32 `wire.points`
(absolute high half), so at UTM-scale they landed ~0.5 m off the geometry
while endpoint/center (sourced from f64 key_vertices/snap_pts) stayed
correct. Now they rebuild each vertex from points + points_low (the
double-single low residual) and run the geometry in f64:
- snap() cursor + geometry helpers (nearest_on_segment, perp_foot,
seg_intersect_xy, extension_snap) are DVec3; wp_f64() reconstructs each
vertex; midpoint uses f64 key_vertices directly (was downcast to f32).
- snap callers pass the precise DVec3 cursor.
Snap capture at deep zoom: the wire-AABB cull compared a sub-millimetre
snap radius against f32 bounds quantized by ~1 ulp (~0.7 m at 5.7e6),
wrongly excluding wires under the cursor. Pad the cull by the bound's own
f32 quantization so it never rejects an in-range wire.
Rubber-band previews (line/circle/arc/ellipse/rect/polygon) built f32
absolute points with an empty points_low, so the wire pass (relative-to-
eye) drew them ~0.5 m off the cursor at UTM. Add WireModel::solid_f64,
which splits f64 points into the double-single high/low pair; previews now
track the cursor exactly.
Known: snapping at extreme zoom on large drawings spikes CPU (per-move
snap cost) — deferred.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Whole command/snap/grip/cursor chain now builds on f64 DVec3 end to end,
so picked points, snaps and grip drags stay precise at UTM-scale
coordinates instead of quantizing to ~0.5 m through f32.
- All ~80 command files migrated: draw (line/circle/arc/ellipse/shapes
in full f64; others via point methods), modify, annotate, insert, view,
inquiry, layers, groups, clipboard, layout.
- Entity apply_grip impls updated for GripApply::{Absolute,Translate}(DVec3).
- Construction sites (EntityTransform/CmdResult/DynAnchor) emit DVec3;
wire-preview boundaries cast to f32 only at the GPU edge.
- Modify/annotate commands keep internal Vec3 geometry where precision is
non-critical, casting at the DVec3 boundary; key draw commands store f64.
Builds clean (no warnings). Visual verification of crosshair/snap/grip at
extreme UTM zoom pending.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
New annotations now place their text and reading geometry along the
active UCS X axis (identity = world), so they read square to the user's
coordinate system instead of world-horizontal:
- TEXT / MTEXT: rotation defaults to the UCS X angle
(DocumentTab::ucs_rotation_angle, model space only).
- Linear dimensions: measure along the UCS axis the span is nearest, and
bake the UCS X angle as the text rotation so the value reads square
even under a style that forces horizontal text. DIMCONTINUE / DIMBASELINE
derive their axis from the base dim's rotation (any angle), not a
world H/V test.
- LEADER: the MText annotation rotates to the UCS, and the hookline runs
along the leader's horizontal_direction (set to UCS X), used by the
renderer instead of world horizontal.
- MLEADER: context.text_direction = UCS X drives both the text rotation
and, in the renderer, the text side and dogleg/landing direction.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Commands that construct geometry with implicit axis directions ignored
the UCS, so a rectangle drawn under a rotated UCS came out world-aligned.
Give commands the UCS and build square to it:
- CadCommand::set_ucs(Mat4) (UCS→wire affine, default no-op); the host
pushes the current UCS via App::push_ucs_to_cmd before each point /
preview / text dispatch (DocumentTab::ucs_wire_affine, identity outside
model space). New axis-aligned commands just override set_ucs.
- RECT (two-corner) and RECT_CEN (center) place their derived corners on
the UCS axes (ucs_box_corners / ucs_box_around_center).
- ARRAYRECT row/column offsets run along the UCS axes.
RECT_ROT, POLYGON, and ELLIPSE already take their orientation from picked
points, so they need no change.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
ARRAY3D/3DARRAY, ATTEDIT/ATE, DDEDIT/ED and WIPEOUT/WO dispatched on literal
matches but had no CommandRegistration entry, so none surfaced in command-line
autocomplete. Add the inventory submit in each command's module, matching the
convention used by the other interactive commands. Audit confirms no remaining
active_cmd dispatch lacks a registration.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
TORIENT dispatched on a literal match but had no CommandRegistration entry,
so it never surfaced in command-line autocomplete. Add the inventory submit
like the other interactive commands.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Fold the Single/Multiple value parsing in TexteditCommand's Mode step into
the shared parse_texteditmode() helper, and report unrecognized input to
the user — the Mode step now stays active and re-prompts with
"Requires Single or Multiple." instead of silently ignoring the value.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Merge PR #130 (KarimJerbi) and resolve review findings:
- Conflict (settings.rs): keep current persisted-settings layout, append
texteditmode field.
- Conflict (command/mod.rs): keep both new CmdResult variants — main's
live-entity ops and the PR's text-edit suspend/resume.
- Bug: invalid TEXTEDITMODE value no longer aborts via the Measurement
arm; it now re-prompts with the error and stays active.
- Dedup: single parse_texteditmode() helper replaces the value parsing
duplicated across commands.rs, settings.rs and textedit.rs.
- Strip trailing whitespace.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
In-place block edit now reads more like a dedicated editor:
- Fade everything except the edited entities toward the background (wires,
block instances and 3D solid meshes) so the block stands out while the
surrounding drawing stays visible for context.
- Don't leave a command active on enter — the user edits the block's geometry
freely (move, grips, draw, erase) and finishes explicitly.
- Show the right-edge vertical toolbar with clickable Save (REFCLOSE_SAVE) and
Discard (REFCLOSE_DISCARD) buttons while a session is active, so the edit
can be ended without typing.
The fade clears on save/discard, restoring full brightness.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Double-clicking a block reference (its wire or its solid body) now enters
in-place block edit (REFEDIT), so its geometry can be modified and the change
reflects in every instance on REFCLOSE.
Also drop REFEDIT's "non-uniform scale not supported" restriction: the
session now carries the INSERT's full forward/inverse affine (OCS, rotation
and non-uniform / mirrored scale) and applies it via the entity transform,
instead of a uniform scale + rotate + translate sequence. Mirrored blocks
(e.g. x_scale = -1) are editable now.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
JOIN previously only merged collinear lines or co-circular arcs into a
single Line/Arc and rejected everything else as "not co-linear" — so the
segments of a broken polyline, which meet at vertices but run at angles,
could never rejoin. It also flattened endpoints to the first segment's Z,
silently discarding height.
Rewrite the geometry pass to chain segments wherever their endpoints
touch, regardless of angle: a collinear straight run still collapses to
one Line, a planar chain becomes an LwPolyline (arcs carried as bulges),
and a chain with varying Z becomes a Polyline3D, preserving height.
Open/closed is detected from the endpoints; a selection that isn't a
single connected chain, or holds an unsupported entity / tilted arc, is
refused with a clearer message.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Remove accidental dead code (unused imports, the superseded paste tool()
helper, a never-read TORIENT handles field, a duplicate let binding, an
unneeded mut) and mark intentional-but-unwired scaffolding with
allow(dead_code): the web-only save_to_bytes, the plugin loadable() probe,
the planned PICK_HIGHLIGHT colours, the DynFieldSpec label, and the layout
ribbon helpers. Native build is now warning-clean apart from the upstream
nom/quick-xml future-incompat notices.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The polyline was only committed to the document on finish, so its partial
geometry produced no snap points — you could not snap to vertices already
placed. Publish it as a real LwPolyline at the second vertex and replace
its geometry in place as later vertices land, so it lives in the document
(and the snapper) throughout the draw.
New CmdResult::CommitLiveEntity / UpdateLiveEntity{finish} plus a
set_live_handle() hook let a command own an entity mid-run. The create
pushes a single undo snapshot; in-place updates push none, so the whole
object reverts as one unit. Updates preserve the entity's handle and
layer (a fresh built entity carries a NULL handle that would desync it
from the document map key and drop it from rendering). (#119)
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- Adds TEXTEDIT command to seamlessly edit annotation objects in-place.
- Matches industry-standard CAD tools' prompt behavior and "Current settings" banner logic.
- Implements the TEXTEDITMODE system variable (0/1) for Multiple vs Single editing modes.
- Enhances command lifecycle with CmdResult::SuspendForTextEdit and post_editor_closed hooks, allowing commands to cleanly pause and resume after external UI editors close.
Turn the ribbon Clipboard "Paste" button into a dropdown:
- Paste — existing pick-a-point paste.
- Paste to Original Coordinates — drops the clipboard at its source
coordinates with no prompt.
- Paste as Block — wraps the clipboard contents in a new block definition
and starts an interactive insert (prompts for the drop point, with the
geometry rubber-banding under the cursor).
Also fixes two bugs the new commands exposed:
- entities_centroid summed the NaN separator points wire models carry,
so the paste base point came out NaN; non-finite points are now
skipped. A NaN base previously froze block tessellation outright.
- PASTEORIG added clipboard entities with their original handles
(duplicates on same-document paste); it now goes through
add_entity_clone and merges referenced records like the other pastes.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
UI chrome (dropdown carets, undo/redo, checkmarks, close/menu/osnap,
layer/file-menu icons) and ribbon tool icons were drawn as Unicode
glyphs. Desktop fills missing glyphs via system-font fallback, but the
web build bundles only Fira Sans with no fallback, so they rendered as
empty tofu boxes (issue #116).
Add a shared src/ui/icons.rs (SVG-backed, tintable) plus bundled assets,
and switch every glyph site and IconKind::Glyph tool def to SVG.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
OpenCADStudio no longer bundles plugins — every add-on is an external
cdylib loaded from the plugins folder or installed via the marketplace.
- Remove the demo plugin and the in-tree ocs_example_plugin crate.
- Remove the inventory-based built-in registration path (PluginRegistration,
all_plugins, installed_manifests); registry now serves core ribbon tabs
plus loaded external plugins, and try_dispatch routes only to externals.
- Plugin Manager drops the 'compiled into this build' section; the
enable/disable toggle moves onto loaded external cards.
- Prune the now-dead HostSession/DocumentTab helpers and re-exports.
Part of the #100 extensibility epic (phase 2).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Plugins targeted the host's concrete HostSession type. Add a HostApi
trait in ocs_plugin_api behind an optional `host` feature (the only thing
that pulls acadrust, so the core crate stays dependency-free). HostSession
implements it and BuiltinPlugin::dispatch now takes `&mut dyn HostApi`, so
an out-of-tree add-on compiles against the contract crate alone. Per-tab
plugin state is reached through object-safe plugin_state* helpers.
Completes the phase-1 host-surface extraction in the #100 epic.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Points could only render as a 1px dot — no way to change PDMODE/PDSIZE.
- PDMODE / PDSIZE commands set the header value and rebuild the glyphs.
- DDPTYPE opens a Point Style dialog: a 5x4 grid of rendered glyphs
(shape x enclosure), a size field, and relative/absolute radios.
- Relative (<=0) PDSIZE now sizes from the current world-per-pixel so the
marker stays a roughly constant on-screen size across zoom, rebuilding
on zoom via the existing camera-generation cache key. Absolute (>0)
scales with the world as before. Switching to absolute with a zero size
seeds a positive value from the on-screen size so it stays representable.
Part of the #100 extensibility epic (point style surfaced in #106).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Add-ons had no way to request a file picker — only the host's own Open
dialog. PluginFileDialog lets a plugin tool ask the host to open a native
picker; on selection the host dispatches "<command> <path>" back to the
plugin with original case preserved (bypassing the command-line
upper-casing that mangles case-sensitive paths on Linux/macOS). The demo
plugin gains an Import tool exercising it.
Part of the #100 extensibility epic (surfaced in #106).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Home tab was already titled "Draw"; rename the module to match:
folder modules/home → modules/draw, HomeModule → DrawModule, id "home"
→ "draw". The inner draw/ command folder is kept (modules::draw::draw).
Update build.rs PRIORITY ("home" → "draw") so the tab returns to the
front of the ribbon; registry.rs regenerates accordingly.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Match the `*_model` naming of the sibling render models (wire_model,
hatch_model, mesh_model, image_model). Also realign the related Scene
API for consistency: model_solids → solid_models, add_model_solid →
add_solid_model, register_model_solid → register_solid_model.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The travel direction of a path array now follows where the user clicks to
select the path: the array starts from the nearest end, so clicking near
either end picks the direction. A stored arc is always CCW regardless of how
it was drawn, so without this the array could run opposite to expectation.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Path arrays along arc segments came out mirrored: the LwPolyline bulge
sampler placed the arc centre on the wrong side of the chord and ignored
the polyline normal. Sample bulge arcs through the canonical BulgeArc and
map OCS->WCS, matching the renderer. Sample standalone Arc/Circle paths via
their OCS basis too. Also align each copy to the path tangent (the first
item keeps its orientation), so items follow a curve instead of staying
upright.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
STRETCH now shows a live ghost where vertices inside the crossing window
follow the cursor and the rest stay anchored, instead of only a rubber-band
line. Add WireModel::stretched and pass the selection's wires into the
command.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
SCALE now scales a live ghost by the cursor distance from the base point
right after the base is picked, instead of requiring a separate reference
pick before any preview appears. Type a factor for an exact scale, Enter
for the last factor, or R for the reference-length workflow (preserved).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
MIRROR now asks "Erase source objects? [Yes/No] <No>" after the second
mirror-line point. No (default) keeps the original and adds a mirrored
copy; Yes flips the original in place. Make the BatchCopy command-line
message label-aware and singular/plural so MIRROR reports "1 copy".
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Make angle display, sign and the polar guide reference part of the
common infrastructure instead of per-command logic:
- DynSpec.ref_point now drives the polar guide's reference direction, so
the arc and value box can sweep from a command-defined reference (not
just +X). LINE etc. keep +X by leaving it None.
- `dyn_display_angle_deg` is the single rule for how an angle reads: the
unsigned magnitude of the short angle, so clockwise (cursor on the CW
side of the reference) shows positive. Used by the generic value box,
ROTATE and ARC.
- A typed angle committed via on_text_input is re-signed by the cursor's
side relative to the reference (`dyn_sign_angle_text`), so commands
receive an already-signed value and don't each implement it.
ROTATE: drop its own sweep arc (the polar guide draws it now, anchored at
the centre and swept from the reference); the rotation commits in the
dragged direction whether picked, typed or accepted with Enter.
ARC SCA/CSA: reference the start angle so the arc, sign and readout are
all relative to it.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- ARC: per-step DynSpec for the typed-value modes — included-angle (SCA,
CSA), chord length (SCL, CSL) and radius (SER) show their box and route
the typed value through on_text_input via a new dyn_commit_as_text()
hook; the angle box previews the live span. Point/3P/SCE steps stay on
the legacy polar path.
- ARC + ellipse-arc: derive the previewed sweep direction from the swept
angle with a ~10° tolerance and advance the reference only on a clear
move, so small cursor jitter no longer flips the arc. Ellipse uses the
parametric angle so a flat ellipse isn't sticky.
- Ellipse arc: the start-angle step now shows a line from the centre to
the cursor (it only picks the start angle) instead of a misleading arc.
- Ellipse arc: use the same minor-axis direction (Z x major) as the
rendered entity so the committed arc matches the preview instead of
mirroring across the major axis.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Extend the DynSpec coverage and add the guides those commands need:
- Rectangle: two-corner enters width/height as unsigned magnitudes (the
sign follows the cursor side, like the angle entry), drawn with the
rectangle as the guide; rotated rectangle's height is a single distance
measured square to the base edge (dimension line offset off the edge
with extension lines); centre rectangle shows half-width/half-height.
- Polygon: inscribed/circumscribed vertex step shows radius + rotation.
- Ellipse: minor-axis step (all three modes) measures the half-length
perpendicular to the major axis and draws that semi-axis from the
centre; angle steps anchor their arc at the centre.
Adds DynGuide::Perp / PerpDim (perpendicular measure to a reference line)
and DynSpec::ref_point, plus Width/Height role handling (unsigned display,
cursor-signed commit) and diameter value scaling.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Introduce a per-command, per-step dynamic-input description so each step
shows the value boxes and guide geometry that make sense for it, instead
of a one-size-fits-all distance/angle pair.
- command: add DynSpec{anchor, fields(role+label), guide}, DynRole
(X/Y/Z/Distance/Angle/Radius/Diameter/Width/Height/Factor/Count with
label + value scaling), DynGuide(None/Polar/AxisDelta/Radius/RectSides)
and DynAnchor. New dyn_spec() trait method defaults to None so commands
on the legacy dyn_field() path are unchanged.
- overlay: redraw the dynamic-input layer by guide — polar reference line
+ angle arc, single radius line, dotted axis legs, or a cursor row —
and place each box by its role. Angle reads as the unsigned magnitude
of the short arc; a typed polar angle takes the sign of the cursor side.
- app: route fields/guide/anchor through the tab; resolve points from the
step anchor and de-scale typed values by role (typed diameter -> radius).
- circle: CR shows a radius value on one line to the cursor; CD shows the
diameter (twice the cursor radius). No angle arc on radius steps.
- pline/mline: keep polar dynamic input on vertex steps that also accept
keyword letters via point_step_accepts_keywords().
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Move the dependency-free, semver-versioned half of the plugin contract into a
standalone workspace crate `crates/ocs_plugin_api`:
- manifest types: PluginManifest, ApiVersion, API_VERSION
- ribbon vocabulary: CadModule trait + ToolDef/RibbonGroup/RibbonItem/IconKind/
ModuleEvent/StyleKey
The host re-exports them from `crate::plugin::manifest` and `crate::modules`, so
every existing call site is unchanged. The acadrust-typed runtime surface
(HostSession) stays in the host binary; lifting it behind a HostApi trait in the
same crate is the remaining phase-1b step.
Part of #100. Docs updated in docs/plugin-architecture.md.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
