Panels can now float over the workspace, share a docked slot as tabs,
and split an edge at heights the user picks.
- Dropping a panel away from the edges floats it at the pointer. Floating
panels move by their title bar, resize from a corner grip, and come to
the front when clicked.
- Dropping in the top or bottom quarter of a docked slot docks the panel
above or below it, as before. Dropping in the middle adds the panel as
a tab of that slot. Pressing a tab shows that panel; dragging a tab
pulls the panel out again.
- While dragging, a blue ghost previews the result: the new slot, the
slot with its future tab row, or the floating window.
- A splitter between stacked slots sets their heights; double-click it
to make the slots equal again. Heights persist.
- A press only becomes a drag after 5 px of movement, so clicking a title
bar or tab never moves the panel.
The persisted layout now stores each edge as tab groups with a height
weight, plus a list of floating panels. Configs with the old
bare-panel-id stacks still load as single-panel slots.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Before a grip is picked, the crosshair now jumps to the grip under it, so
the click lands where the marker shows.
Discussion #1557
Co-Authored-By: Claude Opus 5.5 <[email protected]>
DimensionPreview drew identical generic triangles regardless of dimblk/dimblk1/dimblk2. It now resolves each end through the shared arrow_from_block_name mapping (widened to pub(crate)) and draws per-end glyphs, keeping DIMTSZ tick precedence. Tests: arrow_name_mapping_covers_preview_kinds pins the shared contract; 2 preview_arrow_tests pin per-end resolution (RED first). Full suite: 1989 passed / 0 failed / 25 ignored.
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Dynamic-input fields take ' and " and read 2'9" / 3' as lengths (#937)
- STRETCH on a selection made by a crossing window stretches through that
window and goes straight to the base point (#1068)
- STRETCH's crossing-window steps show no coordinate boxes (#657)
- Collapsed ribbon panel titles wrap at words, never mid-word (#920)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Count adds automation actions to the MCP tool surface and a Count row to
the idle context menu; update the pinned digest and the expected height.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The glyph-text icons (refresh, swap, remove, submenu and step arrows)
are SVG icons from ui::icons (new REFRESH and SWAP) or plain labels.
- The custom RowMenu widget is removed: Sheet Views / Model Views rows use
iced_aw::ContextMenu like the Sheet List rows, with a submenu expanding
in place while hovered.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Invalid Area "Undo" reverts the step that lost the boundary (redo after
an undo, undo otherwise), checks the boundary is back and otherwise puts
the step back and continues without the area; no auto-undo loop.
- COUNTCLOSE / area replacement remove the count polyline outside the
history instead of as an undo step of their own.
- UPDATEFIELD re-evaluates the field texts of a table's *T block and
reports the number actually updated.
- Zoom to a counted object goes through the f64 handle_zoom_to_window.
- Palette: SVG icons instead of glyph text, list cache keyed by tab id,
cached result borrowed instead of cloned, "Count" as the source text.
- Command-line messages go through t!/tf! with entries in all locales.
- Cleanups: \n escapes, area comment, unused parameter, comment order.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The wizard's folder scan, Import Layout as Sheet, the template layout
lists and the drawing cache behind Model Views, Place on Sheet, callout /
label blocks and block previews parsed whole DWGs on the UI thread. They
now go through the shared `background_task` worker: a cache miss reads the
drawing and handles the message that needed it again. Block previews lend
the cached drawing to the preview scene instead of cloning it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- `.dst` read/write go through native-only helpers (a browser answers
"Not available"); the folder pickers are web no-ops; time stamps use
iced::time (web-safe).
- Lock files are written only for drawings that are sheets of an open set,
released when the last set closes, and a lock a crashed session left
(recorded with its process id, same user and machine) is taken back.
The `.dwl2` header is well-formed and the date line comes from the OS
long date on every platform. The 1 Hz poll runs only while a set is open.
- Refreshing sheet set fields never stores `####`: fields no open set
resolves keep their value, and only the hosts that changed are redrawn
(and their tab marked modified).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Closes the view-to-dispatch resort race: the nine Layer* variants plus ColorPickTarget::Layer now carry the layer name and resolve to the current panel row at dispatch time via layer_panel_index; unknown names no-op. View sites (layer panel, ribbon dropdown) and the CLI/plugin path send names, so the CLI position lookup and the ribbon enumerate are deleted. Panel-internal selection state stays index-based. Tests: layer_toggle_visible_targets_layer_by_name_after_resort pins name targeting across a re-sort; layer_toggle_visible_unknown_name_is_noop pins the graceful no-op. Full suite: 1974 passed / 0 failed / 25 ignored.
Moves the byte-identical zebra/selected cell-button bodies from layers.rs and xref_manager.rs plus the layers header-button body into one shared module. All six call sites now use the shared helpers; toolbar_btn helpers untouched (different semantics). No new tests per owner request (pure move, verified by build plus full suite before test removal).
The row menu is a small overlay widget: a click on a submenu entry opens
its fly-out instead of closing the menu, and the fly-out is placed beside
the menu where it actually landed (right when it fits, otherwise left), so
the menu never moves.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Row menus open Set category / Place Callout Block as fly-out submenus
(hover or right press; leftwards when the palette is docked right).
- List of Blocks and Select Block show the Blocks palette's preview.
- VIEW SAVE keeps the window's width/height ratio.
- Placing view content in model space is refused with the reference message.
- Drawings read for views, placement and blocks are cached by modification time.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- When the count area's boundary is gone the approved Invalid Area dialog
asks: undo the change (also its X and Cancel) or count all of model space;
"always" keeps the choice in the settings. An edited boundary moves the area.
- A table's *T block is brought up to date whenever the table changes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Model Views lists named model views and places them on the current sheet
(xref, viewport, paper-space named view, view label with navigation
fields, sheet view record); sheet view rows get Display, Rename & Renumber
View, Set category, Place Callout Block and Place View Label Block; the
View Category dialog's Add Blocks opens List of Blocks / Select Block; a
sheet whose relative path is gone shows missing; sheet set fields store
their values when a set changes; named views keep their centre relative to
the target. Codec pin moves to the revision with these field helpers.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Import Layouts as Sheets shows the reference's statuses (already part of
a sheet set / may belong to another sheet set / available) and Browse
replaces the list; the Field dialog SheetView tree lists sheet views with
their properties, scale formats and hyperlinks; drawings open in tabs get
.dwl/.dwl2 lock files that other instances read as open; the codec pin
moves to the revision with sheet views and the default output folder.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Remove Sheets confirmation, Open in drawing editor, Select Layout as Sheet
Template for subsets that prompt, Import Layouts as Sheets with status and
prefix, Rename & Renumber options with Previous/Next and real layout/file
renames, New Subset folder hierarchy and publish setting, subset properties
rows as the reference shows them, sheet status badges (SSMSHEETSTATUS /
SSMPOLLTIME), Sheet Views by category with the View Category dialog, Model
Views locations, Field dialog SheetSet/SheetView navigation, and .dwt/.dws
read as DWG.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- COUNTCOLOR / COUNTERRORCOLOR / COUNTSERVICE reject any other value with
the range message; COUNTTABLE ? lists in the reference order, padded,
22 lines a page with Press ENTER to continue:, then the totals.
- Target picks report N found / N found, M total; several objects (or one
that is not a block reference) count their copies, shown as Geometries
in the palette.
- Current area is the area in use (kept aside by Entire model space),
otherwise all of model space; an invalid Object boundary ends with the
reference message.
- Count colours reach solids and fills; the palette list and the count
are recomputed only when the drawing changes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The tree menus follow the reference per row kind (New Sheet / Import on a
sheet work on its subset, Remove Subset only while empty, Rename Subset),
a new sheet is not opened, an open set reloads when its .dst changes on
disk, ViewportScale placeholders take the version of their format and
the codec pin moves to the revision with navigation fields.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A full-strength fill on a large tab header read louder than the selected
tab's outline. A faint wash of the same blue still points at the tab
without looking selected.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A command started from the command line, an alias, a shortcut or Repeat
now lights the same ribbon button a click on it would, so users learn
where the tools they type live. A button inside a dropdown lights the
dropdown, a slide-out tool lights its group title, a tool hidden in a
collapsed panel lights the panel's opener, and a button on another tab
lights that tab's header. Always on, in the existing active-button blue.
Buttons are matched by the command they dispatch, so ids that differ
from their command still resolve; the tab on show wins when a command
appears twice, and a clicked button keeps its highlight. Transparent
commands leave the running command lit. The #355 rule that a highlight
lasts only while something runs moves from the ribbon click handler into
dispatch_command, so typed commands are cleared the same way.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
#1585's field_dialog action stored any index it was given, and the dialog
indexes its category, case, size, named-type, formula, precision and plot
scale lists with them, so an out-of-range value panicked while drawing.
They are checked against the list lengths now. The hyperlink browse
button drew a glyph (…) that is tofu without the font, and two of the
new local_header_dates calls were mis-indented.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The PR pinned the codec to its fork through [patch]; codec #75 is merged
upstream and main already points at it, so the patch section is dropped.
The two windows-sys features it adds (Globalization, Identity) stay.
The exponential camera step is the right call. `0.9 ^ delta` is strictly
positive for every real delta, in and out cancel exactly where the
subtraction lost a percent of the view on every round trip, and the file's
own header has promised an "exponential feel" since it was written. Three
surfaces were left behind it, and the wider range exposed a fourth thing.
The range of the system variable. 3 to 100 is the range ZOOMFACTOR has, and
the User Preferences page was built against it; `SETVAR ZOOMFACTOR` accepts
that and nothing else again. A faster wheel is the Options window's business
instead: the slider covers the variable's own range, the field beside it
reaches 500, and a read-out says what a notch actually does ("10.0% a
notch") so the number being set is readable rather than implied. A value
above 100 therefore lives only in this application's own configuration file,
where it is nobody else's to read, and a bare `SETVAR ZOOMFACTOR` still
reports it. The bounds and the clamp live in one place now
(`settings::clamp_zoom_factor`): four literal copies of `3, 100` are what
let a surface be missed in the first place.
A floating viewport in MSPACE. It zooms its own view through
`zoom_active_viewport`, which kept subtracting: the factor reached zero at
6.67 steps, so from ZOOMFACTOR 360 up every notch inside a viewport bottomed
out on the clamp — a tenfold jump a notch, and the top third of the slider
doing nothing at all. Exponential there too, from a base of 0.85 so the
default notch still moves a viewport the 15% it always has. Each surface
keeps its own long-standing feel rather than inheriting the other's.
The trackpad pinch. `pinch_zoom_steps` was calibrated against the
subtraction (`1 - step / 10 = 1 / (1 + m)`) so that a pinch of m leaves the
view exactly 1 + m times closer — the property docs/trackpad.md documents
and the reason the gesture tracks the fingers at all. Inverting the zoom law
by hand is what let the two drift apart, so the step is asked of the camera
now (`Camera::zoom_steps_for_ratio`), which cannot drift by construction.
`pinch_is_one_to_one` recomputed the old formula rather than the camera's,
so it kept passing through all of this; it zooms a real camera and measures
the distance it lands at instead.
Also: `zoom` had a floor and no ceiling, and zooming out multiplies. At
ZOOMFACTOR 500 a notch out is x2.4, so about ninety notches — a couple of
seconds of scrolling — ran the distance past what an f32 far plane
(`distance * 1000`) can hold, and the viewport went black on an infinite
projection. A degenerate pinch magnification of -1 or beyond reached the
same place through the other side. Both are bounded now.
Also: two doc comments quoted the linear law (`zoom_view_at_cursor` and the
one on `pinch_zoom_steps`), and docs/trackpad.md stated the pinch identity
and claimed the tests covered it against the camera. All updated, with what
a notch does and where each surface's range comes from written down.
Tests, each confirmed against the behaviour it describes: the zoom law at
every factor the application can hold (positive, monotonic in the setting,
in and out cancelling), the ceiling under a long scroll out in both
projections, the published inverse and what it does with a nonsense ratio,
the viewport factor and a real viewport zoomed three notches at the top of
the range, the SETVAR range including a value the Options field set, the
Options field (above 100, above the ceiling, cleared, not a number), its
agreement with the slider, Close putting both the value and the field back,
and the read-out's percentages. 1882 lib tests pass.
The two new Options strings are not in the locale catalog yet, so they
render in English until it is regenerated.
Co-Authored-By: Claude Opus 5 <[email protected]>
#1574's dialog drew its pick, close, field and editor buttons with glyph
text (⌖ × ƒ …) that renders as tofu where the font lacks it; they use the
snap and close SVG icons and plain ASCII now. A tag set from Properties is
stored upper case like one from the dialogs, and the stray blank line the
PR left in Cargo.toml is gone.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude