Fixes:
- Hover state no longer drops when the pointer moves up from one strip
icon, group grip or title bar to the one above: iced handles the
element above first, so the old element's "left" (None) cleared the
hover just set. Leave messages now carry the element and only clear
their own hover.
- The drop preview used the pallets' own widths; it now uses the
group's width, matching where the pallet lands.
- Group indexes from messages (group grab, splitter) are looked up
safely, so a message from before a layout change no longer panics.
- Floating placements read from the config are healed (finite, positive,
at least the minimum size), like the group weights already were.
- The shown group's edge bar is centred in its row: a stack takes its
height from its first layer, and the icon column was shorter than the
row. The "Drag to move group" tooltip is removed.
Simplifications (no behaviour change):
- dock_open_at_default / dock_unpeek replace seven copies of "dock on
the right if unplaced, then reveal" and four of "stop peeking".
- The drop target takes the grab offset as a parameter, so a drag
update stores its state once.
- dock_set_open, ensure_settings, the shown-index bookkeeping after a
group is removed and the on-screen width clamp each lose duplication.
- VBarLabel drops options its single caller never varied.
- The drop preview's landing computation is one helper.
Naming and consistency: pallet names in the + menu, the drag ghost and
the floating title bar go through t!(); StripHit::Tab becomes
StripHit::Join; stale comments updated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- The dock's state handling and drawing move out of update/dialog.rs and
view/mod.rs into src/app/dock/ (update.rs, view.rs, tests.rs). The
overlay view_main stacked over the workspace (floating pallets, + menu,
drag preview, pointer capture) becomes one `dock_overlay` call. Code is
moved, not changed.
- Strip icons no longer show the pallet name on hover.
- Tests trimmed where they overlapped: the top / bottom half drops are
one test, the two hover tests are one, and the in-group icon reorder,
raise-float, empty floating title bar and slot-span tests are dropped
(each is covered by another test).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
LayerPanel.editing and color_picker_row were positional indices, so a sort/sync/filter between start and commit retargeted renames and swatches. Both are Option<String> now; commit resolves fresh with graceful no-op on deleted layers. Existing rename tests migrated. Tests: layer_rename_commit_follows_name_across_resort (RED first) plus deleted/empty no-op and picker-resort pins. Full suite: 2019 passed / 0 failed / 25 ignored.
No intended behaviour change except the fixes noted below.
- One drag state: a single `DockDrag` (move pallet / group, width,
splitter, floating size, Layer Manager column) replaces nine fields
(dragging, dragging group, resizing, split, float resizing, origin,
target, grab offset, layer column flag) that had to be kept in sync.
- `dock_expanded` becomes `dock_peek` with one meaning: a pallet revealed
although it auto-hides. `dock_reveal(id)` shows a pallet's group and
peeks it; commands that open a pallet now use it, so opening a pallet
also switches its edge to that pallet's group.
- Each group stores its own width (falling back to its widest pallet's
width until first sized), instead of every pallet's width being kept in
sync. Pallet widths now only size floating pallets and new groups.
- One `dock_set_open(id, open)` holds every pallet's open and close path.
- Leftovers removed: the tab-group config format that never reached main,
the multi-tab drag ghost header, the separate icon-hover message.
Fixes:
- Hovering a strip icon reveals an auto-hiding edge again (the icons had
lost the hover message in the option B strip). Covered by a test that
moves the pointer over the icon in the real view.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Double-clicking a docked or floating title bar did nothing. iced keeps
a widget's state (including the first click of a double-click) only
while the widget tree keeps its shape, and pressing a title bar starts
a possible drag that wrapped the workspace in an extra pointer-capture
layer, rebuilding the title bar and forgetting the first click. The
workspace is now always inside the same stack and mouse area; the
capture handlers are only attached while dragging. A test drives the
real view through iced's UserInterface (keeping its cache between
events, as the runtime does) and fails without this fix.
- The shown group's edge bar was shorter than its row (the tooltip
around the edge band sized it to its content), so it looked off
centre. Band and bar now have explicit heights.
- Picking a pallet in the + menu closes the menu.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
The icon strip follows the agreed "option B" concept:
- Flat 40 px strip; groups are rows of their pallets' icons separated by
hairline dividers, with no grip lines. The + button is a small round
button under the last group.
- The shown group is marked by a blue bar on its window-side edge and
brighter icons. That 8 px edge band is the group grip: hovering it
widens and lights the bar, tints the row, shows a grab cursor and a
"Drag to move group" tooltip; dragging it moves the whole group.
- Icons still drag single pallets: within their group or into another
group (between its icons), or onto a divider to start a new group.
Hovering an icon gives it a soft background and shows its name.
- Drop feedback: a short accent line with end caps between icons means
"join this group here" (the target group's bar lights up); a
full-width line on a divider with a "+ New group" badge means "new
group here". The dragged icon (or whole group) fades in place and a
ghost follows the pointer.
- The zone around a divider (a few px into the icons on either side)
starts a new group; the lower half of a group's last icon still joins
that group at the end.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
rename_style_storage and rename_symbol rewrote entities and table rows but left dimtxsty stale, so the next Apply resolved a NULL handle. The follow now lives in both shared functions; the plugin workaround is removed as redundant. Tests: text_rename_follows_dimtxsty drives the manager path (RED first); pre-existing plugin rename test stays green via the shared path. Full suite: 2015 passed / 0 failed / 25 ignored.
Dragging a pallet over its own group (e.g. the block palette, alone on
the right edge) targeted joining that group. Joining first detached the
pallet, which removed the now-empty group, then indexed it: an
out-of-bounds panic, hit already by the live drop preview. A pallet alone
in the group it would join now just stays put.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
StyleKey::TableStyle only updated the ribbon mirror, so inserts kept using the header value and resync re-seeded from the mirror. The arm now writes current_table_style_name plus dirty when the style exists, and sync_ribbon_styles seeds from the document like Text/Dim. Tests: tablestyle_ribbon_pick_writes_header_and_dirties plus pick_flows_into_table_insert covering pick-to-dialog (both RED first). Full suite: 1996 passed / 0 failed / 25 ignored.
- Auto-hide is a setting of the left / right edge rather than of each
pallet: the pin on any docked pallet turns it on for its whole edge,
which then shows only its icon strip until an icon is hovered. A
floating pallet keeps its own auto-hide.
- Hovering the strip icons only shows a group while the edge auto-hides;
otherwise groups switch on click.
- The + menu checks only the pallets open on that edge. Picking one that
is open elsewhere (the other edge, floating) moves it to this edge;
unchecking a checked one hides it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A group is now a set of pallets shown together, stacked top to bottom,
and an edge shows one group at a time. The icon strip lists every group
(grip bar over its pallets' icons, the shown group on a grey
background); clicking any icon of a group shows that whole group.
- Dropping a pallet on the top / bottom half of a pallet in the shown
group stacks it above / below; dropping on the strip's icons places it
in that group at that spot, and on a grip or below the last group
starts a new group (which is then shown).
- Splitters set the heights of the pallets within a group; double-click
makes them equal again.
- Each group keeps its own width; the divider sizes only the group it
belongs to, and switching groups switches width.
- A group whose pallets all auto-hide shows only while hovered.
- Layouts saved by older builds load with their stacked pallets as one
group.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A lofted surface's region cross sections are recorded as the curve round
each region, as the reference records them; a region recorded as a
region made the reference refuse to open the drawing.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The reference writes none; a draft distance on an extruded surface made
it re-extrude the surface with a taper when the profile changed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The polyline round a region is written about the region's normal in its
object coordinates with an identity transform, as the reference writes
it; a rebuild from the history placed a polyline given in plane
coordinates with a frame at the wrong place once the region moved. Arcs
of one circle making a whole turn are recorded as that circle.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Each dock edge now has a vertical icon strip along the window edge in
place of the horizontal tab row and the auto-hide rail.
- Every shown group gets a grip bar with its pallets' icons below it;
the shown pallet's icon has a grey background. Clicking an icon shows
that pallet in its group; hovering the icons of an auto-hiding group
opens it.
- Dragging an icon within the strip reorders it or moves it into
another group; dropping it on a grip or below the last group makes it
a new group there. On the pallet area, the top / bottom bands still
start a new group above / below and the middle joins the group.
- Dragging a grip moves the whole group to another position or edge.
- A + button under the groups opens the pallet menu (icon, name, check
mark). Opening a pallet from it docks it on that edge as a new group,
or in its existing group there; a checked pallet is hidden.
- Groups keep their width when moved; the divider against the viewport
sizes the whole edge column.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A swept, extruded or revolved surface made from a region records the
region as the curve round it, as the reference does: a lone circle or
whole ellipse as itself, a loop of lines and arcs as a closed polyline in
the region's plane. A region recorded as a region made the reference
refuse to open the drawing (modeling error 58000).
A region read by an associative action carries the step its edge names
belong to (ACAD_STEPID), so the reference finds the edges again and the
surface follows the region.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The tab row shows only when at least two pallets share a slot.
- Tab icons are larger (18 px). The shown tab gets the grey background
without a border; other tabs have no background.
- The pallet menu was drawn by a dropdown that squeezed it to one icon
wide. It is now its own overlay hanging under the menu button, laid
out like the right-click menu: pallet icon, name, and a check mark on
the right for the pallets shown in this slot. Any click outside closes
it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
The surface extrusion, the extrusion along a path, revolve history and
embedded profiles refused a region whenever it had more than one display
wire, which a region of several edges always has. They now refuse only a
region with holes, and a region's loops for a solid extrusion come from
its modeler edges.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- LAYERS opens the Layer Manager as a dockable pallet instead of a modal
dialog with a darkened backdrop. It floats over the middle of the
drawing the first time and keeps its place after that; LAYERS again
(or its close button) hides it. The table keeps its natural width and
scrolls sideways when the pallet is narrower, and the Name column
divider now drags through the dock's pointer capture. Ctrl+A selects
all layers while a layer row is selected in the open pallet.
- The Layer Manager is listed in the tab-row pallet menu like the others.
- Double-clicking a docked title bar floats the panel beside its edge;
double-clicking a floating title bar docks the panel on the side its
title bar faces.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A region keeps one display wire per edge, so a region of several edges
gave no polygon and could not be extruded (solid or surface), and a
circle region was extruded from its display polygon. Profiles of a region
with one boundary loop now come from the region's modeler edges.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Dropping on a docked pallet now stacks it above or below over the top
and bottom 35 % of the slot; only the middle 30 % makes it a tab.
- Tabs show the pallet icon (title as tooltip), aligned to the left.
Every docked slot has the tab row, so its menu is always reachable.
- A menu button at the right of the tab row lists every pallet with a
check mark for those shown in this slot. Checking one opens it as a
tab here (moving it from wherever it was docked); unchecking hides it
and keeps its tab for next time.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A region of several edges kept its display wires one per edge, so the
surface extrusion found no polygon and refused it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A new drawing carries the visual styles the reference's new drawing has
in its visual style dictionary. -VIEW sEttings Visual style offers them
(2dWireframe as "2D Wireframe") and a saved view starts with the 2D
Wireframe style.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A swept, extruded, revolved or lofted surface made from a region now
reads the region through one geometry dependency per edge, each naming
its edge by a persistent subentity id recorded in the drawing's
subentity manager, so the surface follows the region. A lofted surface
keeps one continuity and bulge value per cross section.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Dragging a tab along its slot's tab strip moves it to the gap under the
pointer; the drop preview shows the new tab order. A panel dragged from
elsewhere onto a tab strip lands at that position too. A drop in the
middle of the slot still appends a newcomer and leaves a member where
it is.
- All tabs of a slot share one width: a joining panel takes the slot's
width, resizing or resetting one tab sizes them all, and slots sized
apart by older configs render at their widest tab. Switching tabs no
longer changes the column width.
- Hovering an auto-hide rail raises its slot without turning the rail
blue.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
- Docked title bars show the pin and close only while the pointer is
over the bar; the bar keeps a fixed height so nothing jumps.
- Auto-hide on is drawn as a 30° tilted pin (new pin_active.svg)
instead of a coloured button background, on docked and floating bars.
- A floating panel's resize grip sits in the bottom corner away from its
title bar. With the bar on the right it is bottom-left (new mirrored
resize_left.svg) and resizing from there keeps the right edge fixed.
The bar stays on its side while resizing.
- While a floating panel is dragged, only the drop preview shows it; the
panel no longer stays drawn at its old place.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A dimension carries its graphics in a block of its own, drawn in that
block's frame, and the entity records where the frame sits. The renderer
inserted it at the origin instead, so every dimension whose file carries a
non-zero insertion point drew far from the geometry it measures — the whole
picture offset by that point. Dimensions inside block definitions are where
this shows: a drawing of plan blocks scattered their dimension graphics
thousands of units away, over empty sheet.
The picture now follows the dimension's insertion point, rotation, scale and
extrusion, the way any block reference is placed.
Co-Authored-By: Claude Opus 5 <[email protected]>
Every docked panel now shows its title bar flush along the top, like the
Properties panel: dock::frame takes the title bar separately and pads
only the content below it.
A floating panel drops its horizontal title bar for a vertical one on
the side facing the nearer workspace edge. Close and the auto-hide pin
sit at the top; the panel's icon sits at the bottom with the title
reading upward above it. The free part of the bar drags the panel. With
auto-hide on, a floating panel shrinks to its title bar until hovered.
Panel views take a dock::Chrome (auto-collapse plus floating) in place
of the bare auto-collapse flag, so the shared title bar knows when to
step aside.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_013RyGiMXcsf9HTKfqDxaQGt
A drawing whose plan content is built from blocks reaches thousands of
definitions, and each one took a buffer of its own for its segments and
another for its constants, plus one per placement run. The payloads are a
few hundred bytes, but every allocation costs a page: 14k definitions ask a
device for 1.8 GB to hold 12 MB of geometry. D3D12 runs out, the failed
allocations stay invalid, every later frame writes to them, and the session
dies in the staging belt.
The definitions of a build now share one arena: constants in a single
uniform buffer addressed by dynamic offset, segments in a single geometry
buffer addressed by first_vertex, placements in a single instance buffer
addressed by first_instance, with another arena started whenever one of the
three would outgrow the per-buffer budget. The cache holds the records
rather than the buffers, so a build the device rejected poisons nothing.
Co-Authored-By: Claude Opus 5 <[email protected]>
SURFACEASSOCIATIVITY now keeps EXTRUDE, REVOLVE and LOFT surfaces linked to
their sources: the profile (and axis object) or cross sections are kept, the
surface is made again when they change, and the drawing's associative
network carries an action with the extruded, revolved or lofted surface
action body, its path parameters and value parameters as the reference
writes them. Swept, extruded, revolved and lofted surfaces can read
splines (NURBS edge curve, fit-point splines through their fit points)
and ellipses (elliptical edge curve). Associative surfaces of a file
opened here follow their sources too.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Island cuts stay inside the face; MASSPROP falls back to a coarser mesh
when the finest leaves a face untriangulated.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
An orthographic preset sets its orthographic UCS while UCSORTHO is on
(*FRONT*, *RIGHT*, …; TOP returns to the world UCS); presets no longer
flip to the opposite view when repeated. -VIEW runs as its own command:
Window asks for the name and corners, sEttings loops over Background,
Categorize, Layer snapshot, live Section, Ucs and Visual style with the
reference prompts and messages, Save keeps the UCS with the view while
UCSVIEW is on and Restore brings it back. UCSORTHO and UCSVIEW are
profile variables.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Pins: codec 8189f83, kernel a82f17d, graph d3558bb (all manifests and
the python plugin lock).
- MASSPROP reports volume, centroid, inertia, products, radii of
gyration and principal moments of 3D solids and bodies from their
B-rep (exact where analytic, else from a fine mesh).
- OFFSET of ellipses and splines through the kernel's curve offset.
- FILLET between circles, ellipses and splines through the kernel's
curve-curve fillet, trimming arcs and open splines to the tangents.
The kernel bump brings the DWG ACIS audit fixes: slices, booleans and
press/pull on cones, slanted cylinder sections, survey coordinates,
spline walls and touching parts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
ysdirector