Opening a drawing no longer drops entities with its own sanity checks or
rewrites knotless splines; recovery runs the codec's repair and records
its actions and unresolved issues in the drawing's notifications. Xref
merges keep every entity. The dropped-entity counts, their command-line
warnings, recovery report rows and the automation "purged" field go with
the guard.
AUDIT now reports the codec's audit (counts plus the first 50 issues) and
asks whether to fix; Yes applies the codec repair as one undo step.
Cargo: codec 325fa98, kernel dfca391, graph 5d4e713.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
EED names its application by APPID handle. Copying between drawings
(paste, COPYTO, block palette insert, REFEDIT) kept the source
drawing's handles, so the saved DWG named APPIDs it did not have and
the reference program refused to open it (xdata.cpp eInvalidInput).
The copy now carries the APPID records its XDATA names, registers the
missing ones, and re-points the EED at them.
COPYTO also skipped every layer the target lacked (the check tested
the source) and filled the target with the whole linetype catalog; it
now copies the missing layers and loads only the linetypes used.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The guard remembered only the last announced (tab, generation), so
switching A -> B -> A announced A's load again. Each tab now carries
its own pending flag, set when a document is installed and cleared by
the boundary dispatch.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Reference-only entities (plugin API v9): a scene-scoped, in-memory
designation for plugin-owned display geometry, plus HostNotification
dispatch to native plugins so they can re-mark on DocumentOpened.
Resolves the new DeltaSnapshot site in block_editor.rs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Close the no-load-callback gap: on_notification was a dead dispatch sink —
a plugin had no way to learn that the active document changed, the selection
changed, or that a document opened, so runtime designations could not be
re-seeded after a load.
Dispatch the existing plain variants at the fingerprint-guarded boundaries
the v4 bridge already uses: DocumentChanged (the active tab's settled
geometry epoch) and SelectionChanged (the selection set) leave through
BuiltinPlugin::on_notification at the post-message boundary — after the
mutation settles and pending history scopes closed, never mid-undo or
mid-pick — and at the automation post-op boundary. Plugin-initiated writes
publish immediately after settling, like the drawing-changed event; the
boundary fingerprint guard deduplicates.
Add the additive HostNotification::DocumentOpened { tab_id } variant
(discriminant 10, the counterpart of DocumentTabClosed): fired exactly once
per whole-document install — file open, template new, system open — keyed on
a new per-tab document generation, so an edit can never repeat it and a
reload fires it once. The API version stays v9 (the bump is unreleased).
Write semantics for handlers, tested and documented: a handler may call
HostApi write methods through the same session (set_reference_only at
minimum); its write bumps the epoch, the next boundary notifies once more,
and because re-marking already-designated geometry is a documented no-op —
no epoch bump, no undo step, no publish — the loop terminates. History
(undo/redo) replay itself emits nothing; the boundary is the only channel.
No Python mapping, like the rest of this increment.
Preview the current unsaved block in a disposable drawing with independent history. Keep normal Draw tools available, append Close Test Block, and return to the original editor without saving. Guard persistence paths and handle refresh and parent-close lifecycle by stable document identity.
A layout opened for the first time - one whose sheet viewport had to be
made, or one created in this session - gets a viewport centred on the
printable area, 0.8 of its width and height, zoomed to the model's
extents, while LAYOUTCREATEVIEWPORT is on. The profile variable takes
ON/OFF or 1/0 and is kept with the settings.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Bug:
Message::TabClose carried a vector index captured when the view message
was built. Closing several tabs in one batch (Close All / Close Others
with unsaved-changes dialogs, or a queue of continuation updates) let an
earlier close shift the vector before a later TabClose(idx) was handled:
self.tabs.remove(idx) either panicked (index past the end) or closed a
different tab than the one the user confirmed.
Reproduce:
1. Open several drawings and modify each so they all prompt on close.
2. Use Close All, or close two tabs in quick succession so both messages
are handled in one batch.
3. Before: panic in remove(idx), or the wrong tab closes while the tab
the user chose stays open (or its work is lost).
4. After: the chosen tab closes; an id already closed by an earlier
message is a no-op.
Fix:
TabClose now carries the tab's stable u64 id, resolved to a vector
position when the message is handled, not when it is built;
PendingClose::Tab stores ids the same way. All construction sites pass
tab.id (a raw usize index no longer type-checks), and
DocTabCloseAll/DocTabCloseOthers build their queues from live ids at
handling time. A missing id means the tab is already gone, so the
handler returns Task::none().
- Define Ty, Param, Rule, and OpDef in src/mcp_ops.rs for all 39 mutations
- Generate Draft 2020-12 schema using per-op anyOf variants with op enum discriminators
- Disambiguate colliding properties (replace, center, name) across mutation variants
- Add pre-dispatch validator enforcing required fields, rules, and parameter types
- Emit unknown parameter warnings into response warnings
- Introduce target_document_id for entities_copy_to with deprecated document_id fallback
- Update unit tests and automation smoke assertions
The graph panel gets New, Open and Save. A .ocg file is JSON holding the
graph (nodes, parameters, links), the canvas (positions, open sections,
pan, zoom) and each object node's entity handles, plus the fingerprint
GUID of the drawing those entities live in. On open, handles are reused
only in that same drawing and only while the entity is still the node's
kind; otherwise evaluation creates new entities, so a graph opened in
another drawing never takes over unrelated objects. A drawing without a
fingerprint gets one when its graph is first saved.
Pins opencadcodec d6d534f (DXF now writes $FINGERPRINTGUID and
$VERSIONGUID), opencadkernel 5d9e921 and opencadgraph 5c9b004 (graph
JSON round trip).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The operations docs/automation/API-SPEC.md (PR #1383) describes, brought
over from huaninstratech/OpenCADStudio so the specification no longer runs
ahead of the code:
- entity CRUD: entities_create, entities_delete, entities_transform,
entities_copy_to, and `where` filters on query
- blocks and export: block_define, block_delete, a normalised wblock
- publishing: layout_create, page_setup_set, plot (per_page included)
- metadata: sysvar, xdata_set / xdata_get, file_identity
- collections: group_create, selection_set_save / load
- control plane: batch, events, view_focus, close
- the REST transport: `--http <port>`, the /api/v1 routes and their
OpenAPI 3 description
- person-in-the-loop picks: user_select and getpoint, hosted by the GUI
over the same REST routes, with on-screen pending signals
Taken from the fork's commits b7a7ed80, 69396b42, 64f1cf6a, c3aafc8e,
bb5a7bfa, 52317a5c, 50d293ba, b90e194f, 517c6397, 53a5c4c9, a49ac045,
37de5a46, a78b1822, 6d9aed2a, 33f522da, 5b5cafe2, 02a7e78d, 94df40dc,
fd5bc14d, 485fac61 and 2c5fc994.
Left out on purpose: 37de5a46 also removed the donation surface (the
Patreon fetch, the donation prompt, the Start-page supporters rail, the
DONATE command and its locale strings) and replaced the About dialog's call
to action; that is the fork's own product decision and stays out. The
fork's version bump and its unrelated IFC/BIM work are not part of this.
Adapted while porting: the REST server and the GUI bridge are desktop-only
and a template start is refused in the web build, so the wasm target still
compiles; the two plot tests read the PDF through the shared stream helper,
because exported streams are Flate-compressed; the benches set the new
crosshair field; comments and docs describe each operation in its own
terms rather than by another product's API names.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
