Three settings that work, persist, and could only be reached by typing their
name: TEXTFILL, CLIPROMPTLINES and COMMANDLINEFADETIME. The last two govern
how much of the command window is prompt and how long its history lingers —
the kind of thing people fiddle with once and then leave, which is exactly
what a settings dialog is for.
One fix rides along. TEXTFILL is a process-global, so changing it invalidates
the text in every open drawing; the SETVAR path rebuilt only the active tab,
leaving the others rendering the previous setting until an unrelated edit
happened to rebuild them. Both paths now go through
`invalidate_text_everywhere`, so the checkbox and the command cannot disagree.
Co-Authored-By: Claude Opus 5 <[email protected]>
General had become three unrelated controls: a language picker, a save format
and a file association. The last two move to an Open and Save page, where
they join the two saving preferences that have never had a widget.
Automatic save has worked since the SAVETIME command was added and is
persisted; the only way to change the interval was to type it. Same for the
`.bak` copy from #205 and its ISAVEBAK command. Both are settings people
expect to find in a dialog, and neither was in one.
The page also carries a button through to the Plot dialog. Options holds the
preferences; the plot device, paper and plot styles stay where they already
work well. Note that the modal stack shows one dialog at a time, so the
button replaces Options rather than stacking on it.
Co-Authored-By: Claude Opus 5 <[email protected]>
The dialog laid its pages out as a row of buttons across the top, which is
what AutoCAD does and what fits while there are four of them. The pages this
series adds take it to nine, and the names are translated into 21 languages —
a row of nine German or Russian page names does not fit at any dialog width
worth having.
The rail is now a vertical list down the left, the dialog is 880×620 rather
than 540×560, and the content pane scrolls on its own.
Which page was open is now remembered. With four pages, reopening on General
was a shrug; with nine it means hunting for the one you were last in.
The ribbon's Options tool has existed all along — `ToolDef`, icon and all —
but was marked `#[allow(dead_code)]` and never added to a group, so the
dialog could only be reached by typing OPTIONS or from the start page. It
now sits in Manage ▸ Application, beside About.
No settings change in this commit; it is only the shell the rest needs.
Co-Authored-By: Claude Opus 5 <[email protected]>
Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <[email protected]>
- Changed button padding from [5, 10] to [4, 8] to match layout tabs
- Changed container left padding from 6.0 to 2.0 for consistent spacing
- Plus button now has same distance from Start tab as from Layout tabs
Co-authored-by: Copilot <[email protected]>
Switching to a Layout stops the main thread long enough that the
compositor decides the application has stopped responding and offers to
kill it. The switch itself is not the problem — `layout-switch` reports
about 10 ms — it is the frame after it, which rebuilds the whole wire set.
That frame now has a cheap one in front of it. `layout_settling` is set
when the switch takes, and while it holds, the viewport is replaced by a
centered "Preparing layout…" on the canvas background. No shader widget
means no scene primitive, so `prepare` has nothing to do and the frame
costs nothing. A `window::frames` subscription clears the flag, which is
the guarantee this needs: that callback runs once a frame has actually
been presented, so the notice is on screen and the compositor has been
answered before the expensive frame starts.
The deferral is of the *frame*, not the switch. Two callers depend on the
switch having completed when it returns — one calls `fit_all` immediately
after, another compares `current_layout` — so deferring the switch itself
would have broken both.
This restarts the compositor's timer immediately before the slow frame and
replaces a stale window with something that says what is happening. It
does not make the slow frame fast: if the rebuild still exceeds the
compositor's timeout the dialog can return, and the durable fix is the
2 s `memo_miss` behind it, which is a separate change.
Only `en-US` is validated against at build time; Greek is filled in too
since it is in use here, and the rest fall back until translated.
Co-Authored-By: Claude Opus 5 <[email protected]>
`view-detail` located the first paper frame's cost precisely: 7826.9 of
7832.8 ms in `grid`. Once, on the first frame after a layout switch —
every other frame in a 2769-frame session reports it at 0.0.
That is the largest single cost in a layout switch, larger than the model
re-tessellation and the arena rebuild combined, and it is not geometry
work at all. `grid_overlay` itself only wraps a canvas; `grid_segments`
runs later, in `draw`. So the time is in `grid_views` or in the per-view
parameter build, and reading the two does not settle which: both reach
helpers that can fall back to a full document walk, and neither obviously
fires for this drawing.
`grid-detail views= params= bg= n=` splits it, and reports only when the
block costs at least a millisecond so the quiet frames stay quiet.
Co-Authored-By: Claude Opus 5 <[email protected]>
The first Model→Layout switch costs ~9.2 s, and the largest single piece
of it is `view` at 5810 ms — iced widget-tree construction, not the scene.
The scene work that follows it in `prepare` (two `wires-build` calls plus
`frame-prepare`) accounts for 3377 ms, and the log's ordering shows the
two are sequential, not nested: `view` prints before any of them.
`view` being one number could not say which part of a 1950-line
`view_main` that is. It now reports eight sections — viewport_3d,
model_input, grid, selection_overlay, viewport_mouse, viewport_stack,
active_vp_rect, chrome — plus the preamble as `head`.
The marks go through a closure over a `RefCell` rather than one binding
per section: two of the sections sit inside a nested block, where
per-section bindings are out of scope by the time the report runs.
Co-Authored-By: Claude Opus 5 <[email protected]>
- Add 'i ' prefix to EntryKind::Info and coordinate set_step_prompt deduplication to satisfy WCAG 1.4.1 across all 22 themes
- Drop unused _desk parameter from crosshair_background and clean up its call sites
- Document AutoCAD-standard context-based crosshair drafting surface architecture in crosshair_background
- Add doc comments documenting deliberate alpha omission in canvas_is_light and backlog scope in is_wide
- Add dropdown_popup_width helper in common.rs replacing magic formula heuristics
- Implement is_wide range table to count East Asian Wide/Fullwidth (CJK) glyphs double for localized strings
- Calibrate unit scale factor to 0.68 * font_size preserving existing width behavior at font size 11
- Apply shared calculation across viewport controls and ribbon dropdowns
- Update unit tests to verify width calculation on standard and CJK labels
- Raise accessible_accent default threshold from 2.0 to 3.0 (WCAG 1.4.11 UI state indicators)
- Raise EntryKind::Info command line history threshold from 3.0 to 4.5 (WCAG 1.4.3 normal text)
- Update themed_check_cell to verify >= 3.0:1 contrast across both weak popup panel and strong highlighted rows
- Replace fully-qualified accessible_accent_threshold calls inside closures with use imports
- Add comprehensive 9-suite theme accessibility contrast test suite covering all 22 themes across core surfaces
- Add canvas_is_light helper based on WCAG luminance (> 0.5)
- Ensure crosshair_background always returns sheet white in paper space
- Update resolve_selection_base_color to resolve user ACI -> light-canvas palette -> theme palette
- Add light_canvas_color with curated deep-green/deep-blue pairs for light surfaces
- Extract selection_fill_alpha with 1.35x contrast compensation on light surfaces
- Thread canvas_bg through draw_marquee and poly selection
- Note deliberate limitation for desk-spanning marquee edge case
- Add test coverage for paper space, ClassicDark, custom light bg, and fill alpha clamping
Everything measured so far accounts for about 1 ms of a ~120 ms pan
frame: update is 5-28 ms at worst and usually far less, prepare 0.45 ms,
encode 0.5 ms. Meanwhile the GPU idles at 0-8%, encoding no scene at all
leaves latency unchanged, major page faults stay flat at 17 across forty
seconds of panning, and freeing 6 GB of swap changes nothing either.
So the time is in code that has never been timed. `view()` runs between
the input handler returning and `prepare` being called, rebuilds the
whole widget tree every frame, and is the largest unmeasured span in
that gap.
Reports only when it exceeds 1 ms, so a healthy frame stays quiet.
Co-Authored-By: Claude Opus 5 <[email protected]>
Pan and even plain cursor movement over the canvas ran at ~8 fps on a
large drawing. Nothing rendered was responsible: the GPU idled at 0-8%,
encoding no scene at all changed nothing, and vertices, pixels and draw
calls could each be cut without moving the number. `view` was the frame
-- 110 ms of it against 3-6 ms on a small drawing -- and inside `view`
it was the status bar.
The status bar builds the selection-filter menu, which asks for the
distinct entity type names in the layout. That call cloned the layout's
entire handle list (1 166 357 handles, ~9 MB), then did a map lookup, a
String allocation and a BTreeSet insert for each one. About 107 ms of a
110 ms frame, to produce roughly twenty names, for a menu that is only
visible when opened.
Cache the result against geometry_epoch and the layout block, since it
only changes when entities are added or removed, and make the scan
itself borrow the handle list rather than clone it and collect &str,
allocating only for the names it returns.
The immediate-mode UI rebuilds every widget on every mouse move, which is
fine as long as nothing in that path is O(document). This was.
Co-Authored-By: Claude Opus 5 <[email protected]>
Model space appearance now follows the active UI theme instead of a
hardcoded dark background. Canvas mode is user-selectable (Match Theme /
Classic CAD Dark / Custom RGB), with matching controls for the paper
sheet and desk surround backgrounds and grid opacity.
Implements industry-standard CAD system variables, all settable via
command name, SETVAR, and the Options dialog:
- COLORTHEME (0/1 dark/light UI scheme, preserves custom palettes)
- COLORSCHEME (interactive named-theme selection)
- BACKGROUND (THEME/CLASSIC/DEFAULT/DESK presets, RGB triplets)
- SELECTIONAREA, SELECTIONAREAOPACITY (translucent marquee fill)
- WINDOWSAREACOLOR/WINDOWAREACOLOR, CROSSINGAREACOLOR (ACI or theme)
- SELECTIONEFFECT, SELECTIONEFFECTCOLOR (GPU highlight pass, driven by
selection_generation invalidation — no retessellation)
- SELECTIONPREVIEW (bit 0 = idle rollover, bit 1 = in-command hover)
- GRIPSIZE, GRIPCOLOR, GRIPHOT, GRIPHOVER (grip overlay styling)
Scene.selection was Rc<RefCell<SelectionState>> (31 fields, ~1.6KB
with poly_points) cloned deep per view_main per pane via
(*sel_ref).clone() at view/mod.rs:760. Replace with
Arc<RefCell<SelectionState>> (Arc::new(RefCell::new(...)) at
scene/mod.rs:1436,1868), SelectionCanvas holds Arc<RefCell> and
selection_overlay takes Arc<RefCell> (overlay.rs:365,415),
view_main does Arc::clone(&tab.scene.selection) (atomic bump)
instead of deep clone. sel_ref stays borrowed for field reads
(vp_size etc.).
Bench (release, n=5000): SelectionState::clone 39-68ns (64pts) /
11-22ns (0pts) vs Arc::clone 7ns — 5-9x on the hot path.
Tests:
- selection_is_arc_not_refcell: asserts type_name contains Arc
- bench_selection_state_clone / bench_selection_arc_clone / bench_selection_state_clone_empty (ignored, release)
Hold a single Ref<SelectionState> across the block; replace six redundant borrow().vp_size/last_move_pos calls with field reads on the Ref. Move the deep clone to the widget call site ((*sel_ref).clone()), preserving one clone per frame but ensuring the widget receives the same snapshot as the geometry reads.
Replace manual key entry with per-row capture cells: clicking + Add
inserts a draft row at the top with its key cell armed, and the next
key combination is recorded and normalized (Ctrl+Shift+S →
CTRL+SHIFT+S). While armed, a dedicated keyboard listener swallows all
input so recorded shortcuts do not execute in the drawing.
Draft rows are transient and confirmed only through an explicit accept
button, so the table never retains empty rows. Duplicate keys and
unrunnable commands are flagged in danger styling with a persistent
warning naming the conflicting command. Added reset-to-defaults with
confirmation, apply-and-exit, a shortcut count, and an unsaved-changes
guard on close.
Improve the selection-cycling list box so overlapping objects can be
identified at a glance:
- Add a color swatch per row showing the object's effective drawn color
- Show the layer name right-aligned next to the element type
- Size the popup to fit its content with consistent padding
Widen render_style_for_viewport visibility from scene-internal to
crate-wide so the view layer resolves the same color the renderer uses.
Sync current main and companion codec changes before preserving unsupported frame rows, rendering in the entity plane, and sharing final layout metrics with placement preview.
Persist camera, render state, and solid fallback geometry across saves. Generate previews from a clean live viewport and refresh recent-file thumbnails immediately.
The MText editor paints its own caret and is not a focusable widget, so
the command input keeps widget focus behind the dialog. It captures the
arrow itself, which routes the key through CommandLineArrowProbe instead
of ArrowKeyPressed — and that path only asked whether the command input
was focused, never whether an editor was open. Up and Down therefore
walked command history while the user was typing in MText.
Give the probe the same rule ArrowKeyPressed already applies: while the
editor is open the arrow moves its caret. The probe now carries the shift
state so a held Shift still extends the selection on this path.
Fixes#655
