Brings codec PRs #84 (cross-version visual styles, table styles,
subentity managers), #88 (viewport clipping flag, DXF boundary handle),
#89 (DXF viewport snap/twist in degrees) and #92 (field format codes,
event updates).
With #88 a viewport keeps a stored boundary whether or not clipping is
on, so a linked boundary alone no longer means "clipped": rendering,
paper picking, VPCLIP and the Clipped property check the clipping flag
too, and VPCLIP / MVIEW Object and Polygon set it. Before, OCS never set
the flag, so its clipped viewports opened rectangular elsewhere.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Review of #1485: VPCLIP added the polygon it drew to the drawing before
checking its area, so a boundary with no usable area was refused but left
behind as a stray object. It is erased again. The VPCLIP prompts and
messages go through t! like the rest of mview.rs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The chord direction step takes a typed angle and defaults to the last
segment's direction on Enter; CEnter's Angle and Length prompts carry the
direction switch hint as the reference words them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- VPCLIP arc mode takes Angle, CEnter, Direction, Radius and Second pt with
the reference prompts, and CLose closes with a tangent arc; the arc math
is shared with PLINE.
- Viewport clip boundaries from MVIEW and VPCLIP stay visible; picking or
erasing a boundary takes its viewport along.
- XCLIP Clipdepth: a rejected front plane keeps the old front plane and
clears the back plane.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- CLIP continues as IMAGECLIP on a raster image and as VPCLIP on a layout
viewport, with the reference prompts and stored data.
- Image clip boundaries sit on pixel centres, OFF only clears the display
flag, and an inverted boundary cuts the image.
- VPCLIP polygon (Arc/Length/Close/Undo), clipping object and Delete; the
viewport shrinks to the boundary's exact extents, view kept.
- XCLIP Clipdepth: Remove clears only the plane asked, a front plane behind
the back one is rejected with the reference message.
- Attached and imported images carry the reference display flags.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Implement `TABLEDIT` command supporting viewport point-picking on cell interiors
- Support overlapping table hit testing with selection cycling and top-table resolution
- Support `/n` and `\n` multiline paragraph breaks (`\P`) in table cell text editing
- Unify text input modes via `InputKind` (`Point`, `SingleToken`, `FreeText`) on `CadCommand`
- Migrate 15+ commands across annotate, draw, insert, layout, and view modules
- Preserve text casing, literal spaces, and bypass arithmetic eval during FreeText input
- Add dedicated `tabledit_tests` and `free_text_entry_tests` test suites
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <[email protected]>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A SOLID's filled quad and a dimension/MultiLeader text background are flat 2-D
overlays that should draw in wireframe and shaded alike, but face3d_gpu
classified fills by `!fill_tris_low.is_empty()` — and a 2-D fill at UTM scale
carries a double-single low residual for precision just like a real 3-D mesh
face. So the arrowhead fill and the "5;8" cyan text background were routed to
the 3-D buffer and only appeared in shaded mode, vanishing back to nothing on
return to wireframe.
WireModel now carries an explicit `fill_is_3d`: true only for a real surface
(PolyfaceMesh / PolygonMesh face, set in the tessellator), false for every flat
overlay fill. face3d_gpu classifies on the flag, so 2-D fills stay in the
always-visible buffer while keeping their low residual (and UTM precision).
Verified on budweiser: the `_BoxFilled` arrow SOLID and the dim '5;8' MTEXT
background both tessellate with fill_is_3d = false.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Typed values were quantized to the f32 grid before reaching the
entity (e.g. a length of 2000.8 committed as 2000.8020), worsening
with magnitude. The interaction point layer was all glam::Vec3 (f32).
Two-layer fix:
1. Coordinate backbone -> f64. last_point, last_cursor_world,
dyn_anchor, dyn_ref become DVec3; UcsXform transforms, parse_coord,
the ucs helper fns, dyn_resolve_point, the OTRACK typed-distance
paths, command-line coordinate entry and the coordinate readout all
compute in f64. Screen/GPU/alignment stays f32 (snap engine, render
geometry, projection, UCS-icon/viewcube drawing) with casts only at
those boundaries.
2. Per-command committed storage -> DVec3. on_point already received a
DVec3, but many command impls narrowed it back to f32 (let pt =
pt.as_vec3(); Vec<Vec3> fields) and re-widened at build, quantizing
the committed coordinate. Migrated PLINE, SPLINE, MLINE, LENGTHEN,
INSERT, 3D primitives, every dimension/leader/mleader, ray, revcloud,
wipeout, attdef, table, tolerance, array center, mview, plot_window,
plus the QDIM_PLACE handler and qdim_collect_points. Preview,
hit-test and rubber-band paths keep f32 at the boundary.
Hatch manual boundaries are left for a follow-up: HatchModel.boundary
is structurally Arc<Vec<[f32;2]>> and needs a model-level widen.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Command aliases (L→LINE, CC→COPYCLIP) were scattered across dispatch match
arms and CommandRegistration name arrays. Move them all into a single
user-editable file:
- assets/ocad.pgp: shipped default alias table (ALIAS,*COMMAND format),
embedded and copied to config/ocad.pgp on first launch; only that user
copy is read after. AA→AREA default closes#286.
- resolve_alias() rewrites the leading command token at the top of
dispatch_command_inner, so aliases resolve for every path (families,
plugins, Repeat menu). Args after the first space are untouched.
- Autocomplete hides alias keys and, when the whole input is an alias,
surfaces its target command as the top (highlighted) suggestion so the
highlight matches what Enter runs (AA→AREA, L→LINE).
- ALIASEDIT opens a new editor modal (add/edit/delete rows) with an Apply
button; Apply persists to ocad.pgp, closing discards unapplied edits.
- Strip alias tokens from all 8 dispatch match-arm files and 71 module
CommandRegistration arrays, keeping canonical/synonym/distinct-command
names. ocad.pgp is now the sole source: deleting or remapping an alias
there takes effect. CUI stays on the keyboard-shortcut panel.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Change CadModule::ribbon_groups() from -> Vec<RibbonGroup> to -> &[RibbonGroup],
backed by a per-module OnceLock cache. The ribbon group tree is static data
(&'static str, Copy enums) that was being fully reconstructed — Vecs, String
clones, enum discriminants — on every call, including all three per-frame
call sites (view(), dropdown_overlay(), style_combo_overlay()).
- 7 built-in modules + 2 plugin templates cache via function-local OnceLock.
Safe because each is a unit struct with exactly one instance per process
(plugins run in isolated child processes; see PluginProcess::spawn()).
- SharedCadModule avoids the static pattern entirely, storing groups in an
instance field (owned.rs).
- IPC runner converts &RibbonGroup -> OwnedRibbonGroup directly via new
From<&T> impls, avoiding an intermediate clone.
- render_small/render_large and the two make_tool_row closures now borrow
(&RibbonItem, &[ToolDef]) instead of taking ownership, so the view loop
doesn't need to clone items to satisfy the old by-value signatures.
- Various match-ergonomics deref fixes (*id, *default, *icon, etc.) from
the &RibbonItem pattern change.
Whole command/snap/grip/cursor chain now builds on f64 DVec3 end to end,
so picked points, snaps and grip drags stay precise at UTM-scale
coordinates instead of quantizing to ~0.5 m through f32.
- All ~80 command files migrated: draw (line/circle/arc/ellipse/shapes
in full f64; others via point methods), modify, annotate, insert, view,
inquiry, layers, groups, clipboard, layout.
- Entity apply_grip impls updated for GripApply::{Absolute,Translate}(DVec3).
- Construction sites (EntityTransform/CmdResult/DynAnchor) emit DVec3;
wire-preview boundaries cast to f32 only at the GPU edge.
- Modify/annotate commands keep internal Vec3 geometry where precision is
non-critical, casting at the DVec3 boundary; key draw commands store f64.
Builds clean (no warnings). Visual verification of crosshair/snap/grip at
extreme UTM zoom pending.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
UI chrome (dropdown carets, undo/redo, checkmarks, close/menu/osnap,
layer/file-menu icons) and ribbon tool icons were drawn as Unicode
glyphs. Desktop fills missing glyphs via system-font fallback, but the
web build bundles only Fira Sans with no fallback, so they rendered as
empty tofu boxes (issue #116).
Add a shared src/ui/icons.rs (SVG-backed, tintable) plus bundled assets,
and switch every glyph site and IconKind::Glyph tool def to SVG.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Switching to a paper layout used to hijack the ribbon with a contextual
"Layout" tab. Replace that with a reusable right-edge vertical toolbar:
a single centred column of icon buttons floated over the canvas, built
from a flat ToolDef list and dispatching through the existing
RibbonToolClick path (ui::side_toolbar). Paper space now shows Viewport /
Page Setup / Export PDF there and leaves the ribbon on the user's tab;
the contextual layout tab and its three auto-switch hooks are removed.
The toolbar is generic infrastructure for future context action sets.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Type-as-you-go suggestion popup above the input that filters known
command names by substring (so `LEADER` surfaces both LEADER and
MLEADER). Up / Down navigates the list, Enter dispatches the
highlighted entry, clicking a row dispatches directly. Esc on a
non-empty input clears the buffer instead of escalating to
command-cancel.
The name corpus comes from `inventory::submit!` blocks placed next
to each `CadCommand` impl rather than a hand-maintained static list.
Adding a new interactive command means dropping one `inventory::submit!`
line in its own module file — the autocomplete picks it up at the
next compile. 98 submissions seeded across 60 module files;
`command::all_registered_command_names()` flattens them at runtime.
One-shot dispatch arms in `app/commands.rs` (NEW, OPEN, SAVE, UNDO,
…) don't have a `CadCommand` impl and are therefore absent from
autocomplete by design.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Two behaviour changes that bring the command line in line with
established CAD workflow:
1. **Always-on keyboard capture.** The input was blurred whenever no
command was running, so typed letters went nowhere until the user
clicked into the field. Replace the blur with a re-focus on every
command lifecycle transition (cmd_result.rs) and on viewport / tab
/ ribbon clicks (update.rs), focus the input at startup, and add
a global key subscription that catches any unhandled character key
or backspace and routes it into the buffer via two new messages
(CommandAppendChar / CommandBackspace) — so the command line keeps
accumulating keystrokes even if focus parks somewhere not
focusable. Removes the unused blur_cmd_input helper.
2. **Space submits.** Typing a space at the end of the input now
submits the buffer the same way Enter does. Only exception: an
active command that's currently collecting free-form prose
(TEXT / MTEXT / DDEDIT body, ATTDEF prompt / default value,
INSERT attribute value, ATTEDIT cell). Those advertise the new
`CadCommand::wants_text_with_spaces()` flag so the Space character
reaches the buffer as a literal.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Viewport-projected wires now clip at pixel level to their viewport boundary.
- WireModel.vp_scissor: Option<[f32; 4]> — paper-space bbox set on projection
- WireGpu.vp_scissor carries it through to the draw loop
- Pipeline.compute_wire_scissors() converts paper→NDC→pixel each frame
- render() calls set_scissor_rect() per wire, reset after viewport group
- INTEGRATION_GAPS.md: Viewport ⚠️ → ✅, all 51 gaps resolved
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add `aabb: [f32; 4]` field to WireModel (world-space 2-D bounding box).
In tessellate_entity() set each wire's AABB from e.as_entity().bounding_box()
via new entity_aabb() helper; Insert sub-entities each get their own AABB.
Preview/interim wires and any entity returning a zero-extent default box get
UNBOUNDED_AABB so they are never pre-rejected.
Replace the chord-sphere heuristic in Snapper::wire_in_range() with a proper
AABB vs snap-circle overlap test. The new check is four scalar comparisons and
correctly handles closed curves (circles, arcs) which the chord-sphere approach
had to special-case.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Enforce status.locked in pan_active_viewport and zoom_active_viewport:
locked viewports now reject pan/zoom inputs entirely
- Add perspective, render_mode, shade_plot_mode, hide_plot, ucs_icon_visible
fields to the viewport property panel with appropriate pickers/toggles
- Add VPORTS command: lists all user viewports in the current layout
(id, size, position, scale, on/locked state) in the command line
- Add VPLAYER command: per-viewport layer freeze/thaw from the command line
(F <layer> to freeze, T <layer> to thaw, Enter to exit)
- Add CmdResult::VpLayerUpdate variant and its handler in apply_cmd_result
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
The preview rectangle used c1.y (constant) for all four corners and
pt.z for Z instead of c1.z. Corners 3 and 4 now correctly use pt.y
(varying Y) and the constant c1.z, producing a proper XY-plane rectangle.
Fixed in both layout/mview.rs and manage/mview.rs.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Add printpdf 0.9.1 dependency for native PDF generation.
- New src/io/pdf_export.rs: converts paper-space WireModels to a PDF
page (per-wire stroke color, line weight in Pt, NaN-split segments).
White/near-white colors are inverted to black for print output.
- Add PlotExport / PlotExportPath messages: opens a save-file dialog
and writes a .pdf next to the drawing file.
- Add PageSetupOpen/Close/WidthEdit/HeightEdit/Commit messages: a
centered modal panel lets the user enter paper width and height (mm);
on commit the Layout object's min/max_limits are updated in-place.
- Register PRINT / PLOT / EXPORT and PAGESETUP (PS) commands in
dispatch_command; fix MVIEW error message to English.
- Layout ribbon gains a "Plot" group with Page Setup and Export PDF
ribbon buttons.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
