A left drag only became a lasso/window after the button had been held
150 ms, however far the cursor had moved. A fast flick released inside
that delay read as a click and armed a click-click box instead. A press
that has moved more than 12 px is now a drag at once; the delay still
keeps small movements of a click from becoming one. (#1808)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A request settles once the work it started reports back, and waits for
any open or save in progress. When that never happens the bridge stayed
busy: every later request, `cancel` included, was refused until the app
was killed. `cancel` now ends the active command and closes any pending
request as cancelled, not only interactive picks. (#1801)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The paste adds entities to the document directly, so the fill and raster
models `add_entity` seeds were never built. An associative hatch got its
model back when its pasted boundary rebuilt it; a non-associative one
stayed in the drawing but was never drawn. Seed the fill, image and
underlay models of the pasted entities. (#1807)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Block Attribute Manager: the error band's dismiss button is the close
icon, not a "×" glyph the web build may not have.
- Two signatures wrapped to the 100-column limit.
- MCP tool schema digest updated for the new `block_def_dialog` and
`attman_dialog` actions.
- Measurement docs: MEASUREGEOM's Quick mode.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PDFIMPORT follows FILEDIA and -PDFIMPORT asks for the file, page,
insertion point, scale and rotation on the command line. A page with a
viewport measure is imported in its measured units. Straight polylines
that trace arcs, circles and ellipses, and runs of circular Bezier arcs
on one circle, become those objects; other Bezier curves become one
SPLINE each.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add a dockable Block Editor palette with selectable Parameters, Actions,
Parameter Sets and Constraints pages, reusing shared dock controls, icons
and ribbon-style hover bubbles.
Parameters, Actions, Parameter Sets and Block Properties Table are UI
catalogs only. Their entries remain disabled; this commit does not add
parameter placement, dynamic action behavior, parameter-set authoring or
block properties table functionality.
The Constraints page connects its geometric and dimensional entries to
existing ribbon commands. It reuses their implementations and adds no new
constraint behavior.
Keep the palette specific to BEDIT and retain its placement and selected
page across closing/reopening and Test Block. Opening, closing, switching
pages and clicking disabled entries preserve the document, undo history
and any running command.
Validation: 7 palette tests, 57 dock checks and 46 ribbon checks passed
(overlapping groups); rendered pages inspected and native debug build passed.
MEASUREGEOM gains a Quick option. As the cursor moves, the nearest
drawn geometry along the working plane's X and Y lines through it is
measured live: cyan measurement lines and a Horizontal/Vertical readout
by the cursor. A click prints the current readout and keeps measuring;
Enter ends the command. The rays go through the scene's interaction
index, so large drawings stay responsive.
A structure-pick command whose miss message is empty now gets the click
as a plain point instead of an error.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Every plotted wire and hatch resolves to its entity's layer, and the PDF
wraps each run of same-layer items in an optional-content group, so a
viewer's layer panel lists the drawing's layers and can hide them. Draw
order is unchanged; images stay outside any group. Expanded block
geometry goes with its INSERT's layer.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Plugins read the host's document through a shared reference across the
dynamic-library boundary, and the entity index hashed with foldhash's
per-process seed, so every handle lookup from the plugin missed. The
codec now uses a fixed hasher (opencadcodec f385f75; kernel 9841749,
graph e9c23ad).
The Python IPC suite also caught up with intended changes: ATTDEF
renders its tag, DXF now keeps the lock-position flag, and the modify
audit turns associative arrays off since it checks loose copies.
The rate-limiter test waits for the host's check instead of a fixed
sleep that raced on macOS, and ENV_LOCK no longer cascades a poisoned
lock into every later test.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Add the no-selection Block section with annotation, orientation, scaling, exploding, units, description and hyperlink controls. Integrate definition edits with editor history, save checkpoints and discard, and keep staged text tied to its definition.
Persist annotation and hyperlink metadata on the block record, migrate legacy marker values on edit, and honor orientation and hyperlink descriptions during block creation. Cover native DWG/DXF roundtrips and replacement after reopening.
Avoid rebuilding derived caches and clearing tessellation memos when closing the block editor on clean exit or discard. Scope entity delta computation to block record members instead of scanning and cloning the entire drawing, and add a fast path to the dirty check when no local commands were executed.
With dynamic UCS on (UCSDETECT 1, toggled with F6), a command's first
point picked on a planar face of a solid sets the UCS to that face for
the rest of the command, so 2D commands draw on the face (#1711). An
unsnapped first point lands on the face itself; a snapped point off the
face's plane belongs to other geometry and leaves the UCS alone. The
previous UCS comes back when the command ends. UCS commands themselves
are left out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Options → User Preferences → Navigation style picks which mouse
gestures pan and orbit the model view (#1480):
- CAD (default): middle button pans, Shift + middle button orbits.
- Blender: middle button orbits, Shift + middle button pans.
- CATIA: middle button pans; pressing the left button during it orbits,
so 3D navigation needs only the mouse.
An armed orbit tool always orbits. The choice is saved with the user
settings.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cargo: codec d36331d, kernel 60f086b, graph 74aac56.
The table model and its file codec now live in `codec::plot_style`
(opencadcodec#53) and are re-exported here. What stays is where tables
come from: the plot styles folder, the session registry, the shipped
tables, and saving to disk, as the `PlotStyleTableExt` trait.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A selected block reference is previewed from its definition placed by
the reference's transform; the no-objects band is amber.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Live changes are taken back quietly before Apply, OK or Sync write the
list again, so each leaves exactly one undo step even when something
closed the open live step in between; Cancel takes them back without a
command-line notice. References keep their values through renames made
live.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Gradient stops keep their DWG color book name and book; RGB wins over
ACI in a DXF gradient block in either tag order.
- MTEXT decimal tab stops keep their alignment character.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
BATTMAN and ATTMAN open a manager for the attribute definitions of one
attributed block: block chips with reference counts and a pick button,
a table whose columns are chosen with chips, move up/down, remove, and
an edit card (Attribute / Text / Properties) for the selected row. Apply,
OK and Sync write the list back to the block definition and, when asked,
rebuild the existing references keeping values through tag renames;
each is one undo step. Live changes are taken back on Cancel. Automation
gains attman_dialog.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The name card draws the selected objects, or the existing definition the
name picks. OK with no objects shows an in-window band offering to select
objects or to define an empty block. A switch opens the new block in the
block editor once it is defined; it is remembered with the other dialog
choices. Automation gains block_def_dialog.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A browser tab gets a few GB of memory at most, so a drawing of a few
hundred MB can fail to open there while the desktop app opens it
(#918). When an open over 150 MB fails in the browser, the command line
now says so and recommends the desktop app.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With Quick Select or another dialog open, letters typed while one of
its lists was open went to the command line behind it (#922). Typed
glyphs are now dropped while a dialog is up; its own text fields keep
receiving them as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A middle-button drag stopped when the pointer left the viewport: the
mouse area reports moves only inside, and leaving reset the drag, so
the release outside never arrived (#1400). The viewport and each model
pane now carry an input layer that keeps reporting a drag they started,
with the pointer anywhere in the window, and the release outside ends
it; leaving no longer cancels a middle-button drag.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Annotative text in DWG/DXF holds the model height of its default
(native) scale representation; other scales draw it at the ratio of the
two. OCS read the stored value as paper height and multiplied it by the
annotation scale again, so text from AutoCAD came out far too small
(#1734), and annotative text OCS wrote came out too small in AutoCAD.
- Rendering uses the active/native context ratio (1 when the object has
no representation for the displayed scale).
- TEXT with an annotative style asks for the paper height, stores the
model height of the creation scale and gets that context; MTEXT
starts from the model height; ANNOUPDATE converts a fixed style
height the same way.
- Properties: the Height row of annotative TEXT and MTEXT is the paper
height at the displayed scale, with the model height beside it, and
an edit converts back. MTEXT shows Annotative when it has contexts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
With nothing selected, Shift+MMB orbit pivoted on the surface at the
view centre, so grabbing a small part off-centre flung the model away.
It now pivots on the solid or mesh surface under the pointer where the
drag began, falling back to the view centre and then the camera target
(#1389).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
New created a bare dimension style, whose defaults are inch-sized
(0.18 arrows and text). In a metric drawing its arrows came out too
small to see (#1675). It now starts from the selected style.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Import AutoCAD PGP aliases and support UCSFOLLOW workflows. The UCS
conflict keeps main's click-origin flow (axis preview, Enter accepts
the placed axes) and takes the PR's prompt and option keywords.
Selection cycling was reachable only from the status bar and Options.
SELECTIONCYCLING / SETVAR now read and set it: 0 off, 1 or 2 on (the
candidate list always shows).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
PROPERTIES only flipped the visibility flag, so a Properties pallet in
an edge's inactive group or behind auto-hide stayed out of sight. It
now opens through the dock, which brings its group forward. In clean
screen the pallet shows on top without changing its normal state;
leaving clean screen drops that overlay.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Options > Files lets the fonts and plot style folders move elsewhere,
such as a share a whole team uses (Change... / Default). Fonts are then
looked up and downloaded there, and plot style tables listed and saved
there; the choice is kept in the profile.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Changing a TEXT's style in the Properties panel only swapped the font, so
a style that differs in its fixed height, width factor or oblique angle
seemed to change nothing. The text now takes the style's fixed height
(when it sets one), width factor and oblique angle, and an MTEXT the
fixed height.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Both commands gain a mOde option [Quick/Standard]. Quick (the default)
starts ready to pick, every object a cutting or boundary edge; Standard
starts by selecting those edges, Enter with none taking every object.
The choice is TRIMEXTENDMODE (1 Quick, 0 Standard), kept in the profile
and settable with SETVAR.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The resident wire sets were capped at 16 and cleared once more were
held. A layout with more content viewports than that (24 in the report)
cleared them all on each redraw and re-tessellated the model for every
viewport, so the layout stayed sluggish even when nothing changed. The
cap now covers the shown layout's viewports: idle redraws build no
wires, and a frame of that layout draws in ~14 ms instead of ~30 ms
plus ~100 ms of rebuilds.
The automation bridge gains a `layout_switch` action, as clicking a
layout tab does, which is how this was measured.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Restoring a layer state while a layout viewport is active now applies it
to that viewport alone, as viewport freezes and viewport overrides for
colour, linetype, lineweight and transparency (where they differ from the
layer, or an override is already there). On/off, lock and plot have no
per-viewport form and still apply to the drawing.
Viewport colour overrides are packed as the format does (0xC3 index,
0xC2 true colour); reading them now honours that type byte, so an index
override from a file no longer shows as a near-black true colour.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- block-def strings in every locale (English until translated); the
catalog test requires each locale to carry them.
- A new block's base point starts at 0, and ATTMAN / BATTMAN report a
drawing without attributed blocks; the tests expect that now.
- Lines over 100 columns wrapped.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The count was keyed on the gathering command's address, so a command
boxed where the previous one was (MOVE right after MOVE) inherited its
selection and reported its first pick as a duplicate. Drop the report
whenever no command is running.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Selection: report what each pick found while a command gathers objects
Co-Authored-By: Claude Opus 5.5 <[email protected]>
# Conflicts:
# src/locale_catalog.rs
The guard remembered only the last announced (tab, generation), so
switching A -> B -> A announced A's load again. Each tab now carries
its own pending flag, set when a document is installed and cleared by
the boundary dispatch.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Reference-only entities (plugin API v9): a scene-scoped, in-memory
designation for plugin-owned display geometry, plus HostNotification
dispatch to native plugins so they can re-mark on DocumentOpened.
Resolves the new DeltaSnapshot site in block_editor.rs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
