Arcs are now full constraint participants (center/radius via the existing
Circle-shaped solver path, plus real endpoints kept consistent by arc-rules
CurveValue constraints); adds Diameter/DistanceX/DistanceY/ArcLength/Normal
constraint kinds and initial Ellipse entity support (center-based
constraints only). DWG-native class mappings and gaps (ArcLength, Ellipse)
are grounded against real ObjectARX headers rather than guessed, so files
saved with DWG-native constraints stay honest about what AutoCAD can
actually represent.
Also fixes a case-sensitivity bug where a lowercase named-parameter
reference typed at a dimensional constraint's value prompt was rejected
(the command line uppercases SingleToken input before the parameter-name
lookup), and adds a "Used by" column to the Named Parameters panel.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
**TEXTFILL marked the drawing modified.** It is an application preference —
it lives in a process global and is snapshotted into settings.json — but it
was missing from the list of names that persist, so setting it dirtied the
open drawing instead and never reached the settings file through that path.
**LTSCALE and CELTSCALE validated differently depending on the door.** The
standalone commands reject a value of zero or less, because a non-positive
linetype scale degenerates every dash pattern in the drawing. `SETVAR LTSCALE
-5` accepted it. A test drives both entry points for both variables and fails
on the SETVAR path without the fix.
**ISAVEBAK, SAVETIME and FILEASSOC were missing from the autocomplete
registry** although all three dispatch, so the command line never offered
them.
**`bg_color` and `paper_bg_color` were dead fields**, always written as `None`
and ignored on load since the model-space configuration superseded them.
Removing them is safe: the config is `#[serde(default)]` and ignores unknown
keys, so existing settings files simply stop carrying them.
One thing the survey flagged that turned out not to be a bug: on the Display
page the model background row hides itself outside Custom mode while the
paper and desk rows do not. That asymmetry is correct — the canvas mode
governs only the model background, and the other two apply in every mode.
Co-Authored-By: Claude Opus 5 <[email protected]>
Three settings that work, persist, and could only be reached by typing their
name: TEXTFILL, CLIPROMPTLINES and COMMANDLINEFADETIME. The last two govern
how much of the command window is prompt and how long its history lingers —
the kind of thing people fiddle with once and then leave, which is exactly
what a settings dialog is for.
One fix rides along. TEXTFILL is a process-global, so changing it invalidates
the text in every open drawing; the SETVAR path rebuilt only the active tab,
leaving the others rendering the previous setting until an unrelated edit
happened to rebuild them. Both paths now go through
`invalidate_text_everywhere`, so the checkbox and the command cannot disagree.
Co-Authored-By: Claude Opus 5 <[email protected]>
Brings in 54 commits from origin/main: a selection-performance overhaul,
surface thickening, GPU-native wide/tapered stroke rendering, continued
ocs_doc_api evolution, and assorted fixes/polish (block double-click
editing, DWG hatch/database repair, clipboard, collapsible Properties
sections).
Six real conflicts, all where this branch had independently re-applied
a fix upstream later revised or already carried natively:
- src/app/automation.rs, src/app/command_driver.rs: combined both
sides — kept this branch's sketch-constraint/named-parameter loading
on "new"/"open", adopted main's Scene::clear()/material_base_dir and
its newer rebuild_derived_caches() over the older bump_geometry().
Scene::clear() (src/scene/entity.rs) now also resets
sketch_constraints/named_parameters, so every caller gets this for
free instead of each call site repeating it.
- src/io/mod.rs, src/scene/render_graph.rs: adopted main's design
outright (commit 973af87d, authored by Hakan directly) — a large
MINSERT is no longer purged as "corrupt" at load, only its rendering
is bounded, preserving the source data. This branch's own earlier
design (reject at load) predates that revision.
- src/scene/pipeline/mesh_gpu.rs: adopted main's valid_rgba_size()
guard (a real robustness improvement over this branch's version).
- src/snap.rs: replaced wholesale with main's version — this branch's
copy was an explicit verbatim snapshot from an earlier upstream PR
(commit 4c264b8c) with zero constraint-system-specific content, and
main has since evolved it considerably further.
Also removed two now-dead duplicates the merge surfaced without a
conflict marker (both branches had independently fixed the same
things): the OPTIONS/OP command dispatch/autocomplete entries, and
automation.rs's open_finalizes_and_purges_like_the_ui_open_path test
(kept main's version, which covers strictly more: solid_models/
material_base_dir reset on "new").
Full workspace suite passes (812 lib tests + this branch's own 24
constraint/persistence integration tests) except the one pre-existing,
unrelated font-test failure already present on main. Zero clippy
findings in the hand-written merge resolution itself; the ~1,171
warnings clippy reports are pre-existing in the 54 absorbed commits,
not introduced here.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
New ConstraintKind variants — Concentric, CenterPoint, Colinear, Midpoint,
Fixed, PointOnCurve, EqualDistance, Symmetric — each built entirely from
existing ocs_gcs (FreeCAD planegcs) primitives, no new solver math needed.
build_constraint now returns Vec<Rc<dyn Constraint>> instead of
Option<Rc<...>>, generalizing the old Coincident-only "needs a second
system-level constraint" special case to every kind that needs one.
Wired into the ribbon (7 new buttons), a new point+pre-selected-entity
command for CenterPoint/Midpoint/PointOnCurve, a new 4-point command for
EqualDistance, and the existing DWG-native class-name mapping (all 8 reuse
the same generic "plain Geometrical node" path already built for
Coincident/Horizontal/etc.). Deliberately not modeled: Normal and
EqualCurvature, which for this app's Line/Circle-only entity model would
just be Perpendicular and Equal wearing different DWG class names.
Also makes DWG-native constraint persistence opt-in (Options > General,
off by default) rather than unconditional: a scope that doesn't yet have
the native graph is only given one when the setting is on, but a scope
that already has one — from an earlier save, or a file that came from
real AutoCAD — keeps getting it resynced regardless of the setting, so
toggling it off never freezes a stale graph in place.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Named parameters (docs/named_parameters_design.md, stages 3-4):
- ParameterTable (src/scene/named_parameters.rs): a document-wide table of
named formulas, each resolved through a shared expression evaluator with
cross-parameter references, cycle detection, and division-by-zero/parse
error reporting. SketchConstraint::driving_param becomes DrivingValue
(Literal | Named) instead of a bare f64, resolved at solve time by
sketch_solve::build_constraint via Scene::named_parameters.
- Persistence (src/scene/named_parameters_persist.rs): same lazy XRecord
model sketch_persist.rs already established, synced around open/save.
Bumps the sketch-constraint XRecord's own format version (1 -> 2) since
DrivingValue's shape doesn't line up with a version-1 blob's bytes.
- PARAMETERS command and its editor (src/ui/window/named_parameters.rs):
add/remove/edit rows, live validation, duplicate-name detection: Apply
defines the table and re-solves every constraint scope with a
named-parameter-driven constraint (command_driver.rs). Distance/Angle
constraint prompts (modules/draw/constrain/value.rs) now accept either a
literal or an existing parameter's name, mirroring how the constraint's
own value prompt already worked.
- Undo scope-down carried over from this project's own established pattern
(constraint-system stage 9): the geometry an Apply moves is one undo
step, but the parameter table edit itself has no undo entry yet — a
documented follow-up, not a silent gap.
UI scale setting (src/app/settings.rs, app/mod.rs, ui/window/options.rs):
a whole-interface scale percentage (50-200%), wired directly into iced's
own per-window scale_factor hook rather than per-panel font-size
plumbing, so it applies immediately to every panel, dialog, and the
ribbon at once. Persisted alongside the existing lineweight-display-scale
setting.
OPTIONS/OP command dispatch (app/commands/view.rs, app/commands/mod.rs):
OPTIONS was registered for autocomplete but had no dispatch arm — the
Start-tab welcome screen's own button was the only way to reach it.
Found live-testing the UI-scale setting, unrelated to that feature
itself. "OP" is AutoCAD's own short alias.
help/: a new self-contained static user-help manual (manual.md as the
authored source, tools/build_help.py splits it into the committed static
HTML pages plus search index) — not yet wired into the application.
64 new/updated tests across the named-parameters and constraint-prompt
changes.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <[email protected]>
Ports FreeCAD's planegcs 2D geometric constraint solver to Rust as a new
crates/ocs_gcs workspace member, and wires it into the document/scene model
as a persistent SketchConstraintSet: Coincident, Horizontal/Vertical,
Parallel/Perpendicular, Equal, Tangent, Distance, Angle and Radius
constraints that re-solve live (including mid-drag, not just on release),
render glyphs and a DOF badge, flag conflicts with a one-click resolver
pill, and round-trip through save/load via an XRecord blob.
Also includes docs/command_reference.md (a statically generated reference
of every registered command and its prompt sequence) and
docs/named_parameters_design.md + docs/backlog.md, which hand off the next
queued feature (a named-parameter/expression table) and consolidate every
deliberate scope-down and open gap found along the way, so a fresh session
has a complete starting point.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Hakan Seven