Arcs are now full constraint participants (center/radius via the existing
Circle-shaped solver path, plus real endpoints kept consistent by arc-rules
CurveValue constraints); adds Diameter/DistanceX/DistanceY/ArcLength/Normal
constraint kinds and initial Ellipse entity support (center-based
constraints only). DWG-native class mappings and gaps (ArcLength, Ellipse)
are grounded against real ObjectARX headers rather than guessed, so files
saved with DWG-native constraints stay honest about what AutoCAD can
actually represent.
Also fixes a case-sensitivity bug where a lowercase named-parameter
reference typed at a dimensional constraint's value prompt was rejected
(the command line uppercases SingleToken input before the parameter-name
lookup), and adds a "Used by" column to the Named Parameters panel.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
The application has no support-file search path — the four folders it uses
are functions returning fixed paths, not settings. Rather than build a Files
page that pretends otherwise, this one answers the question people actually
open it to ask: where does this thing keep my plot styles. Each row shows the
location and opens it in the file manager, and a row whose path the platform
could not give says so with its button disabled.
General gains buttons through to the plugin manager, the keyboard shortcut
editor and the alias editor. Those three have good dialogs of their own and
are not absorbed; Options simply stops being a place you cannot reach them
from.
Co-Authored-By: Claude Opus 5 <[email protected]>
The ViewCube, the UCS icon, its at-origin placement and selection cycling all
have commands and status-bar pills, and all four kept their value only on the
app struct. Turn the ViewCube off with NAVVCUBE, restart, and it is back.
Nothing failed — the setting evaporated — so a checkbox for any of them would
have been a checkbox that forgets. They are persisted first, with a
round-trip test, and only then given controls.
The new 3D Modeling page carries the three view tools plus the drawing
variables that decide how solids are tessellated: ISOLINES, DISPSILH, SURFU,
SURFV, SURFTYPE, SOLIDHIST and SHOWHIST. Those are saved in the DWG rather
than in preferences, so the page says so beside each group and hides them
entirely when no drawing is open.
Changing them also rebuilds the geometry. The SETVAR path never did, which is
why the comment beside LTSCALE's invalidation exists — the same reasoning
applies here, and without it a new isoline count does not appear until some
unrelated edit rebuilds the solid.
Selection cycling joins the Selection page next to the other two selection
modes, since that is what it is.
Co-Authored-By: Claude Opus 5 <[email protected]>
Two drafting preferences had no proper home. The Drafting Settings dialog
displays the drafting rotation and offers only a Reset button — there was no
way to type an angle short of `SETVAR SNAPANG`. The polar tracking increment
existed in exactly one place: a pop-up hanging off the status-bar pill.
The rotation is a text field over an edit buffer rather than the value
itself, so clearing it to retype does not snap the crosshair to zero on the
way through; the buffer is reseeded whenever the value is restored from
behind it. Angles render without a trailing `.0`, matching how the polar
pop-up has always shown them — same kind of number, same reader.
Snap modes, grid spacing and object snap stay in Drafting Settings, where
they belong; the page links to it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Zoom direction and factor, whether TEXTEDIT ends after one object, whether
continued dimensions inherit the base dimension's style, which points QDIM
measures from, and which annotative objects pick up a newly set scale. All
six work today; none had a control.
Two of them needed their meaning worked out rather than copied.
ANNOAUTOSCALE stores the mode in the magnitude and on/off in the sign, and
the four modes are not documented anywhere in the app — the command prompt
just says `[-4..4]`. Reading `add_annotation_scale_to_objects` gives them:
1 skips layers that are off, frozen, locked or frozen in the viewport, 2
keeps the locked ones, 3 skips only locked, 4 takes everything. The dropdown
names them instead of showing bare numbers, and choosing Off negates rather
than zeroing, so the mode survives being switched off and back on — which is
the convention the status-bar pill already follows.
The QDIM origin priority had no system variable at all; it could only be
reached through a keyword inside the running command.
Drawing units stay in their own dialog; this page links to it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Three settings that work, persist, and could only be reached by typing their
name: TEXTFILL, CLIPROMPTLINES and COMMANDLINEFADETIME. The last two govern
how much of the command window is prompt and how long its history lingers —
the kind of thing people fiddle with once and then leave, which is exactly
what a settings dialog is for.
One fix rides along. TEXTFILL is a process-global, so changing it invalidates
the text in every open drawing; the SETVAR path rebuilt only the active tab,
leaving the others rendering the previous setting until an unrelated edit
happened to rebuild them. Both paths now go through
`invalidate_text_everywhere`, so the checkbox and the command cannot disagree.
Co-Authored-By: Claude Opus 5 <[email protected]>
General had become three unrelated controls: a language picker, a save format
and a file association. The last two move to an Open and Save page, where
they join the two saving preferences that have never had a widget.
Automatic save has worked since the SAVETIME command was added and is
persisted; the only way to change the interval was to type it. Same for the
`.bak` copy from #205 and its ISAVEBAK command. Both are settings people
expect to find in a dialog, and neither was in one.
The page also carries a button through to the Plot dialog. Options holds the
preferences; the plot device, paper and plot styles stay where they already
work well. Note that the modal stack shows one dialog at a time, so the
button replaces Options rather than stacking on it.
Co-Authored-By: Claude Opus 5 <[email protected]>
The dialog laid its pages out as a row of buttons across the top, which is
what AutoCAD does and what fits while there are four of them. The pages this
series adds take it to nine, and the names are translated into 21 languages —
a row of nine German or Russian page names does not fit at any dialog width
worth having.
The rail is now a vertical list down the left, the dialog is 880×620 rather
than 540×560, and the content pane scrolls on its own.
Which page was open is now remembered. With four pages, reopening on General
was a shrug; with nine it means hunting for the one you were last in.
The ribbon's Options tool has existed all along — `ToolDef`, icon and all —
but was marked `#[allow(dead_code)]` and never added to a group, so the
dialog could only be reached by typing OPTIONS or from the start page. It
now sits in Manage ▸ Application, beside About.
No settings change in this commit; it is only the shell the rest needs.
Co-Authored-By: Claude Opus 5 <[email protected]>
Brings in 54 commits from origin/main: a selection-performance overhaul,
surface thickening, GPU-native wide/tapered stroke rendering, continued
ocs_doc_api evolution, and assorted fixes/polish (block double-click
editing, DWG hatch/database repair, clipboard, collapsible Properties
sections).
Six real conflicts, all where this branch had independently re-applied
a fix upstream later revised or already carried natively:
- src/app/automation.rs, src/app/command_driver.rs: combined both
sides — kept this branch's sketch-constraint/named-parameter loading
on "new"/"open", adopted main's Scene::clear()/material_base_dir and
its newer rebuild_derived_caches() over the older bump_geometry().
Scene::clear() (src/scene/entity.rs) now also resets
sketch_constraints/named_parameters, so every caller gets this for
free instead of each call site repeating it.
- src/io/mod.rs, src/scene/render_graph.rs: adopted main's design
outright (commit 973af87d, authored by Hakan directly) — a large
MINSERT is no longer purged as "corrupt" at load, only its rendering
is bounded, preserving the source data. This branch's own earlier
design (reject at load) predates that revision.
- src/scene/pipeline/mesh_gpu.rs: adopted main's valid_rgba_size()
guard (a real robustness improvement over this branch's version).
- src/snap.rs: replaced wholesale with main's version — this branch's
copy was an explicit verbatim snapshot from an earlier upstream PR
(commit 4c264b8c) with zero constraint-system-specific content, and
main has since evolved it considerably further.
Also removed two now-dead duplicates the merge surfaced without a
conflict marker (both branches had independently fixed the same
things): the OPTIONS/OP command dispatch/autocomplete entries, and
automation.rs's open_finalizes_and_purges_like_the_ui_open_path test
(kept main's version, which covers strictly more: solid_models/
material_base_dir reset on "new").
Full workspace suite passes (812 lib tests + this branch's own 24
constraint/persistence integration tests) except the one pre-existing,
unrelated font-test failure already present on main. Zero clippy
findings in the hand-written merge resolution itself; the ~1,171
warnings clippy reports are pre-existing in the 54 absorbed commits,
not introduced here.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
New ConstraintKind variants — Concentric, CenterPoint, Colinear, Midpoint,
Fixed, PointOnCurve, EqualDistance, Symmetric — each built entirely from
existing ocs_gcs (FreeCAD planegcs) primitives, no new solver math needed.
build_constraint now returns Vec<Rc<dyn Constraint>> instead of
Option<Rc<...>>, generalizing the old Coincident-only "needs a second
system-level constraint" special case to every kind that needs one.
Wired into the ribbon (7 new buttons), a new point+pre-selected-entity
command for CenterPoint/Midpoint/PointOnCurve, a new 4-point command for
EqualDistance, and the existing DWG-native class-name mapping (all 8 reuse
the same generic "plain Geometrical node" path already built for
Coincident/Horizontal/etc.). Deliberately not modeled: Normal and
EqualCurvature, which for this app's Line/Circle-only entity model would
just be Perpendicular and Equal wearing different DWG class names.
Also makes DWG-native constraint persistence opt-in (Options > General,
off by default) rather than unconditional: a scope that doesn't yet have
the native graph is only given one when the setting is on, but a scope
that already has one — from an earlier save, or a file that came from
real AutoCAD — keeps getting it resynced regardless of the setting, so
toggling it off never freezes a stale graph in place.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Named parameters (docs/named_parameters_design.md, stages 3-4):
- ParameterTable (src/scene/named_parameters.rs): a document-wide table of
named formulas, each resolved through a shared expression evaluator with
cross-parameter references, cycle detection, and division-by-zero/parse
error reporting. SketchConstraint::driving_param becomes DrivingValue
(Literal | Named) instead of a bare f64, resolved at solve time by
sketch_solve::build_constraint via Scene::named_parameters.
- Persistence (src/scene/named_parameters_persist.rs): same lazy XRecord
model sketch_persist.rs already established, synced around open/save.
Bumps the sketch-constraint XRecord's own format version (1 -> 2) since
DrivingValue's shape doesn't line up with a version-1 blob's bytes.
- PARAMETERS command and its editor (src/ui/window/named_parameters.rs):
add/remove/edit rows, live validation, duplicate-name detection: Apply
defines the table and re-solves every constraint scope with a
named-parameter-driven constraint (command_driver.rs). Distance/Angle
constraint prompts (modules/draw/constrain/value.rs) now accept either a
literal or an existing parameter's name, mirroring how the constraint's
own value prompt already worked.
- Undo scope-down carried over from this project's own established pattern
(constraint-system stage 9): the geometry an Apply moves is one undo
step, but the parameter table edit itself has no undo entry yet — a
documented follow-up, not a silent gap.
UI scale setting (src/app/settings.rs, app/mod.rs, ui/window/options.rs):
a whole-interface scale percentage (50-200%), wired directly into iced's
own per-window scale_factor hook rather than per-panel font-size
plumbing, so it applies immediately to every panel, dialog, and the
ribbon at once. Persisted alongside the existing lineweight-display-scale
setting.
OPTIONS/OP command dispatch (app/commands/view.rs, app/commands/mod.rs):
OPTIONS was registered for autocomplete but had no dispatch arm — the
Start-tab welcome screen's own button was the only way to reach it.
Found live-testing the UI-scale setting, unrelated to that feature
itself. "OP" is AutoCAD's own short alias.
help/: a new self-contained static user-help manual (manual.md as the
authored source, tools/build_help.py splits it into the committed static
HTML pages plus search index) — not yet wired into the application.
64 new/updated tests across the named-parameters and constraint-prompt
changes.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <[email protected]>
Resolve curve intersections through cadkernel, retain empty exact results, gather analytic candidates independently of tessellation, and bound material uploads. Preserve large MINSERT data while limiting rendering work; remove obsolete review narratives.
- Add 2px top padding for breathing room above buttons
- Buttons now start above the resize slider area
- Improves visual spacing at top of command history panel
Co-authored-by: Copilot <[email protected]>
- Remove top padding from panel container (0 instead of 4)
- Buttons now start flush at top edge above scrollbar
- Improves visual alignment and space usage
Co-authored-by: Copilot <[email protected]>
- Increase header container right padding from 6 to 8 pixels
- Ensures Copy and Clear buttons align consistently with top alignment
- Improves visual spacing on the right side for cleaner UI appearance
Co-authored-by: Copilot <[email protected]>
Ports FreeCAD's planegcs 2D geometric constraint solver to Rust as a new
crates/ocs_gcs workspace member, and wires it into the document/scene model
as a persistent SketchConstraintSet: Coincident, Horizontal/Vertical,
Parallel/Perpendicular, Equal, Tangent, Distance, Angle and Radius
constraints that re-solve live (including mid-drag, not just on release),
render glyphs and a DOF badge, flag conflicts with a one-click resolver
pill, and round-trip through save/load via an XRecord blob.
Also includes docs/command_reference.md (a statically generated reference
of every registered command and its prompt sequence) and
docs/named_parameters_design.md + docs/backlog.md, which hand off the next
queued feature (a named-parameter/expression table) and consolidate every
deliberate scope-down and open gap found along the way, so a fresh session
has a complete starting point.
Co-Authored-By: Claude Sonnet 5 <[email protected]>
Use SELECTOR_PAD_V (calculated from ROW_H and FONT_SZ) instead of
hardcoded [3, 6] padding for color selector buttons. This matches the
padding used by combo_box widgets for Lineweight and Linetype,
ensuring all three ByLayer dropdowns align vertically and have
consistent height.
Fixes#1047
Co-authored-by: Copilot <[email protected]>
Replace Wrapping::WordOrGlyph with Wrapping::Word to prevent labels
like 'Dimensions' from breaking as 'Dimensio' + 'ns'. Word-only wrapping
ensures labels only wrap at word boundaries.
Fixes#1046
Co-authored-by: Copilot <[email protected]>
- Add 'i ' prefix to EntryKind::Info and coordinate set_step_prompt deduplication to satisfy WCAG 1.4.1 across all 22 themes
- Drop unused _desk parameter from crosshair_background and clean up its call sites
- Document AutoCAD-standard context-based crosshair drafting surface architecture in crosshair_background
- Add doc comments documenting deliberate alpha omission in canvas_is_light and backlog scope in is_wide
- Add dropdown_popup_width helper in common.rs replacing magic formula heuristics
- Implement is_wide range table to count East Asian Wide/Fullwidth (CJK) glyphs double for localized strings
- Calibrate unit scale factor to 0.68 * font_size preserving existing width behavior at font size 11
- Apply shared calculation across viewport controls and ribbon dropdowns
- Update unit tests to verify width calculation on standard and CJK labels
- Raise accessible_accent default threshold from 2.0 to 3.0 (WCAG 1.4.11 UI state indicators)
- Raise EntryKind::Info command line history threshold from 3.0 to 4.5 (WCAG 1.4.3 normal text)
- Update themed_check_cell to verify >= 3.0:1 contrast across both weak popup panel and strong highlighted rows
- Replace fully-qualified accessible_accent_threshold calls inside closures with use imports
- Add comprehensive 9-suite theme accessibility contrast test suite covering all 22 themes across core surfaces
- Add canvas_is_light helper based on WCAG luminance (> 0.5)
- Ensure crosshair_background always returns sheet white in paper space
- Update resolve_selection_base_color to resolve user ACI -> light-canvas palette -> theme palette
- Add light_canvas_color with curated deep-green/deep-blue pairs for light surfaces
- Extract selection_fill_alpha with 1.35x contrast compensation on light surfaces
- Thread canvas_bg through draw_marquee and poly selection
- Note deliberate limitation for desk-spanning marquee edge case
- Add test coverage for paper space, ClassicDark, custom light bg, and fill alpha clamping
Model space appearance now follows the active UI theme instead of a
hardcoded dark background. Canvas mode is user-selectable (Match Theme /
Classic CAD Dark / Custom RGB), with matching controls for the paper
sheet and desk surround backgrounds and grid opacity.
Implements industry-standard CAD system variables, all settable via
command name, SETVAR, and the Options dialog:
- COLORTHEME (0/1 dark/light UI scheme, preserves custom palettes)
- COLORSCHEME (interactive named-theme selection)
- BACKGROUND (THEME/CLASSIC/DEFAULT/DESK presets, RGB triplets)
- SELECTIONAREA, SELECTIONAREAOPACITY (translucent marquee fill)
- WINDOWSAREACOLOR/WINDOWAREACOLOR, CROSSINGAREACOLOR (ACI or theme)
- SELECTIONEFFECT, SELECTIONEFFECTCOLOR (GPU highlight pass, driven by
selection_generation invalidation — no retessellation)
- SELECTIONPREVIEW (bit 0 = idle rollover, bit 1 = in-command hover)
- GRIPSIZE, GRIPCOLOR, GRIPHOT, GRIPHOVER (grip overlay styling)
DIMAUNIT 4 is Surveyor's units, but format_angular_value matched only
0-3 and let 4 fall through the catch-all to decimal degrees. An angular
dimension in a drawing authored with surveyor units therefore read as
plain degrees, while AUNITS 4 in the same drawing writes a bearing for
the coordinate readout — the two disagreed on one angle.
Format the bearing from the dimension's own DMS path so it carries
DIMADEC, DIMAZIN and DIMDSEP, quantise before picking the quadrant so a
value just short of a cardinal does not quote a quarter turn, and offer
the option in the dimension-style dialog.
Scene.selection was Rc<RefCell<SelectionState>> (31 fields, ~1.6KB
with poly_points) cloned deep per view_main per pane via
(*sel_ref).clone() at view/mod.rs:760. Replace with
Arc<RefCell<SelectionState>> (Arc::new(RefCell::new(...)) at
scene/mod.rs:1436,1868), SelectionCanvas holds Arc<RefCell> and
selection_overlay takes Arc<RefCell> (overlay.rs:365,415),
view_main does Arc::clone(&tab.scene.selection) (atomic bump)
instead of deep clone. sel_ref stays borrowed for field reads
(vp_size etc.).
Bench (release, n=5000): SelectionState::clone 39-68ns (64pts) /
11-22ns (0pts) vs Arc::clone 7ns — 5-9x on the hot path.
Tests:
- selection_is_arc_not_refcell: asserts type_name contains Arc
- bench_selection_state_clone / bench_selection_arc_clone / bench_selection_state_clone_empty (ignored, release)
