Broad pass over the command set: integrate missing commands, wire
previously-unreachable ribbon/menu buttons, and correct name/behaviour
mismatches. Every UI command token now resolves (real handler where the
infrastructure exists, an honest "not yet implemented" status otherwise).
New commands:
- Draw: 3DPOLY, 2D solid (SO/SOLID2D), HELIX, TRACE, SKETCH, DIMCENTER
(DCE/CENTERMARK)
- Modify/inquiry: REVERSE, MEASUREGEOM (MEA), DBLIST
- Data/manage: BASE, OVERKILL (exact-duplicate removal), AUDIT (read-only
integrity report), SETVAR (system-variable get/set), SCRIPT (.scr runner),
FINDNONPURGEABLE
Behaviour fixes:
- LINE and SPLINE gain Close/Undo; AREA computes area/perimeter in f64
(correct at large coordinates)
- ATTEDIT/ATE unified so the alias and the ribbon button open the
interactive editor; -ATTEDIT is the command-line form
- Linear/aligned/radius/diameter dimensions gain a text override (Text) and
text angle (Angle) option
- INSERT gains Scale/Rotate options; COPY gains an Array option
- LINETYPE SET sets the current entity linetype; SETBYLAYER resets overrides
- UNDO accepts a step count
Integrations: standard dimension/block aliases (DLI/DRA/DAN, BMAKE,
EXPORTPDF, DDIM), drafting-aid and screen toggles (GRID/SNAP/POLAR/OSNAP/
DSETTINGS/CLEANSCREEN/QUICKPROPERTIES), viewport tiling
(CASCADE/HORIZONTAL/VERTICAL/VPJOIN), and customization entry points
(CUI/ALIASEDIT).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Whole command/snap/grip/cursor chain now builds on f64 DVec3 end to end,
so picked points, snaps and grip drags stay precise at UTM-scale
coordinates instead of quantizing to ~0.5 m through f32.
- All ~80 command files migrated: draw (line/circle/arc/ellipse/shapes
in full f64; others via point methods), modify, annotate, insert, view,
inquiry, layers, groups, clipboard, layout.
- Entity apply_grip impls updated for GripApply::{Absolute,Translate}(DVec3).
- Construction sites (EntityTransform/CmdResult/DynAnchor) emit DVec3;
wire-preview boundaries cast to f32 only at the GPU edge.
- Modify/annotate commands keep internal Vec3 geometry where precision is
non-critical, casting at the DVec3 boundary; key draw commands store f64.
Builds clean (no warnings). Visual verification of crosshair/snap/grip at
extreme UTM zoom pending.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Type-as-you-go suggestion popup above the input that filters known
command names by substring (so `LEADER` surfaces both LEADER and
MLEADER). Up / Down navigates the list, Enter dispatches the
highlighted entry, clicking a row dispatches directly. Esc on a
non-empty input clears the buffer instead of escalating to
command-cancel.
The name corpus comes from `inventory::submit!` blocks placed next
to each `CadCommand` impl rather than a hand-maintained static list.
Adding a new interactive command means dropping one `inventory::submit!`
line in its own module file — the autocomplete picks it up at the
next compile. 98 submissions seeded across 60 module files;
`command::all_registered_command_names()` flattens them at runtime.
One-shot dispatch arms in `app/commands.rs` (NEW, OPEN, SAVE, UNDO,
…) don't have a `CadCommand` impl and are therefore absent from
autocomplete by design.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
PolyfaceMesh and PolygonMesh were wireframe-only. They now render with
the same flat-color solid fill as Face3D entities.
- Add fill_tris: Vec<[f32;3]> to TruckEntity and WireModel
- PolyfaceMesh: fan-triangulate each face into fill_tris
- PolygonMesh: triangulate each grid quad into fill_tris
- tessellate.rs Lines branch: apply world_offset to fill_tris
- Face3DGpu::from_wires: collect fill_tris from all wires in addition
to Face3D key_vertices quads
- upload_face3d: pass all_wires so fill_tris are batched into one draw call
Viewport-projected wires now clip at pixel level to their viewport boundary.
- WireModel.vp_scissor: Option<[f32; 4]> — paper-space bbox set on projection
- WireGpu.vp_scissor carries it through to the draw loop
- Pipeline.compute_wire_scissors() converts paper→NDC→pixel each frame
- render() calls set_scissor_rect() per wire, reset after viewport group
- INTEGRATION_GAPS.md: Viewport ⚠️ → ✅, all 51 gaps resolved
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
LwPolyline PLINEGEN=0 (DXF default): emit SegmentedLines with NaN
separators between vertex-to-vertex segments; wire_gpu resets
arc-length to 0 after each NaN so linetype pattern restarts per vertex.
PLINEGEN=1: existing Contour path unchanged (continuous pattern).
WireModel gains plinegen field propagated through tessellate pipeline.
Solid3D/Region/Body: call SabReader::read() when parse_sat() returns
None due to binary SAB format (DWG files / newer AutoCAD exports).
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add `aabb: [f32; 4]` field to WireModel (world-space 2-D bounding box).
In tessellate_entity() set each wire's AABB from e.as_entity().bounding_box()
via new entity_aabb() helper; Insert sub-entities each get their own AABB.
Preview/interim wires and any entity returning a zero-extent default box get
UNBOUNDED_AABB so they are never pre-rejected.
Replace the chord-sphere heuristic in Snapper::wire_in_range() with a proper
AABB vs snap-circle overlap test. The new check is four scalar comparisons and
correctly handles closed curves (circles, arcs) which the chord-sphere approach
had to special-case.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
DIMALIGNED: 3-click flow (p1 → p2 → dim line position) → DimensionAligned.
Rubber-band preview shows extension lines and dim line offset.
DIMDIAMETER: 3-click flow (center → arc point → text position) → DimensionDiameter.
Previews the diameter chord line.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
