Options → Selection already carried the pick box, the selection-area effect
and the grip visuals. Four settings behind it were finished, persisted and
reachable only by typing a system variable, and one more was a constant.
**Four that only needed a widget.** `SELECTIONEFFECT`, `SELECTIONPREVIEW`,
`PICKADD` and `PICKDRAG` are all wired end to end already. `SELECTIONEFFECT`
was the odd one: the card's own "Restore Defaults" button resets it, so it
could be turned off by a button and only turned back on from the command
line.
`SELECTIONPREVIEW` is a bitmask and gets one checkbox per bit, which is why
`set_preview_bit` exists rather than two inline expressions — the bits are
the thing this change is most able to get backwards.
The `PICKADD` checkbox is worded as AutoCAD words it, "use Shift to add to
selection", which is the *inverse* of the stored flag. That inversion is
commented at both ends; it reads as a bug otherwise.
**`GRIPOBJLIMIT`.** The limit past which a selection gets no grips arrived
with the selection work as a hardcoded 100, matching AutoCAD's default. It is
now a setting, a slider and a system variable, following `PICKBOX`'s path
exactly. AutoCAD's 0 means "no limit", which the old `>` comparison could not
express, so the read now guards on it — with a test, because zero is the one
value that would otherwise suppress every grip instead of allowing all of
them.
The slider covers 0..=1000, where every useful value lives; the sysvar takes
AutoCAD's full 0..=32767, and a larger value set from the command line parks
the handle at the end while the read-out keeps showing the real number.
**`SelectionPrefs`** replaces the `pick_box` parameter rather than adding
three more. `view_window` already took seventeen positional arguments, and
`pick_add` / `pick_drag_rect` are two adjacent `bool`s that would swap
silently at the call site.
**Two fixes found on the way.** `OPTIONS` and `OP` were registered for
autocomplete but never dispatched, so typing either answered "Unknown
command" and the dialog could only be opened from the start page. And the
`SELECTIONPREVIEW` doc comment had its bits the wrong way round — the code
reads `& 1` for the idle rollover and `& 2` for the in-command one, as
AutoCAD does — which would have put the two new checkboxes' labels backwards.
**Not done, deliberately.** `PICKFIRST` and `PICKAUTO` exist but are always
on, with no variable. `PICKSTYLE` is stored in the header and read by nobody
— group expansion decides from the group's own `selectable` flag — so an
"object grouping" checkbox would control nothing. Associative-hatch selection
does not exist as a selection behaviour. Each needs a behaviour change rather
than an exposure.
Of the ten new strings, en-US and el-GR are translated; the other nineteen
locales carry the English text. Composing them from existing keys, the way
el-GR composes the neighbouring labels, only works for one of the ten —
there is no existing key for "limit", "unlimited", "shift", "rectangle" or
"lasso", and "Grips: Objects" as the label of a numeric limit would be worse
than an untranslated string.
Co-Authored-By: Claude Opus 5 <[email protected]>
Resolve curve intersections through cadkernel, retain empty exact results, gather analytic candidates independently of tessellation, and bound material uploads. Preserve large MINSERT data while limiting rendering work; remove obsolete review narratives.
- Add 2px top padding for breathing room above buttons
- Buttons now start above the resize slider area
- Improves visual spacing at top of command history panel
Co-authored-by: Copilot <[email protected]>
- Remove top padding from panel container (0 instead of 4)
- Buttons now start flush at top edge above scrollbar
- Improves visual alignment and space usage
Co-authored-by: Copilot <[email protected]>
- Increase header container right padding from 6 to 8 pixels
- Ensures Copy and Clear buttons align consistently with top alignment
- Improves visual spacing on the right side for cleaner UI appearance
Co-authored-by: Copilot <[email protected]>
Use SELECTOR_PAD_V (calculated from ROW_H and FONT_SZ) instead of
hardcoded [3, 6] padding for color selector buttons. This matches the
padding used by combo_box widgets for Lineweight and Linetype,
ensuring all three ByLayer dropdowns align vertically and have
consistent height.
Fixes#1047
Co-authored-by: Copilot <[email protected]>
Replace Wrapping::WordOrGlyph with Wrapping::Word to prevent labels
like 'Dimensions' from breaking as 'Dimensio' + 'ns'. Word-only wrapping
ensures labels only wrap at word boundaries.
Fixes#1046
Co-authored-by: Copilot <[email protected]>
- Add 'i ' prefix to EntryKind::Info and coordinate set_step_prompt deduplication to satisfy WCAG 1.4.1 across all 22 themes
- Drop unused _desk parameter from crosshair_background and clean up its call sites
- Document AutoCAD-standard context-based crosshair drafting surface architecture in crosshair_background
- Add doc comments documenting deliberate alpha omission in canvas_is_light and backlog scope in is_wide
- Add dropdown_popup_width helper in common.rs replacing magic formula heuristics
- Implement is_wide range table to count East Asian Wide/Fullwidth (CJK) glyphs double for localized strings
- Calibrate unit scale factor to 0.68 * font_size preserving existing width behavior at font size 11
- Apply shared calculation across viewport controls and ribbon dropdowns
- Update unit tests to verify width calculation on standard and CJK labels
- Raise accessible_accent default threshold from 2.0 to 3.0 (WCAG 1.4.11 UI state indicators)
- Raise EntryKind::Info command line history threshold from 3.0 to 4.5 (WCAG 1.4.3 normal text)
- Update themed_check_cell to verify >= 3.0:1 contrast across both weak popup panel and strong highlighted rows
- Replace fully-qualified accessible_accent_threshold calls inside closures with use imports
- Add comprehensive 9-suite theme accessibility contrast test suite covering all 22 themes across core surfaces
- Add canvas_is_light helper based on WCAG luminance (> 0.5)
- Ensure crosshair_background always returns sheet white in paper space
- Update resolve_selection_base_color to resolve user ACI -> light-canvas palette -> theme palette
- Add light_canvas_color with curated deep-green/deep-blue pairs for light surfaces
- Extract selection_fill_alpha with 1.35x contrast compensation on light surfaces
- Thread canvas_bg through draw_marquee and poly selection
- Note deliberate limitation for desk-spanning marquee edge case
- Add test coverage for paper space, ClassicDark, custom light bg, and fill alpha clamping
Model space appearance now follows the active UI theme instead of a
hardcoded dark background. Canvas mode is user-selectable (Match Theme /
Classic CAD Dark / Custom RGB), with matching controls for the paper
sheet and desk surround backgrounds and grid opacity.
Implements industry-standard CAD system variables, all settable via
command name, SETVAR, and the Options dialog:
- COLORTHEME (0/1 dark/light UI scheme, preserves custom palettes)
- COLORSCHEME (interactive named-theme selection)
- BACKGROUND (THEME/CLASSIC/DEFAULT/DESK presets, RGB triplets)
- SELECTIONAREA, SELECTIONAREAOPACITY (translucent marquee fill)
- WINDOWSAREACOLOR/WINDOWAREACOLOR, CROSSINGAREACOLOR (ACI or theme)
- SELECTIONEFFECT, SELECTIONEFFECTCOLOR (GPU highlight pass, driven by
selection_generation invalidation — no retessellation)
- SELECTIONPREVIEW (bit 0 = idle rollover, bit 1 = in-command hover)
- GRIPSIZE, GRIPCOLOR, GRIPHOT, GRIPHOVER (grip overlay styling)
DIMAUNIT 4 is Surveyor's units, but format_angular_value matched only
0-3 and let 4 fall through the catch-all to decimal degrees. An angular
dimension in a drawing authored with surveyor units therefore read as
plain degrees, while AUNITS 4 in the same drawing writes a bearing for
the coordinate readout — the two disagreed on one angle.
Format the bearing from the dimension's own DMS path so it carries
DIMADEC, DIMAZIN and DIMDSEP, quantise before picking the quadrant so a
value just short of a cardinal does not quote a quarter turn, and offer
the option in the dimension-style dialog.
Scene.selection was Rc<RefCell<SelectionState>> (31 fields, ~1.6KB
with poly_points) cloned deep per view_main per pane via
(*sel_ref).clone() at view/mod.rs:760. Replace with
Arc<RefCell<SelectionState>> (Arc::new(RefCell::new(...)) at
scene/mod.rs:1436,1868), SelectionCanvas holds Arc<RefCell> and
selection_overlay takes Arc<RefCell> (overlay.rs:365,415),
view_main does Arc::clone(&tab.scene.selection) (atomic bump)
instead of deep clone. sel_ref stays borrowed for field reads
(vp_size etc.).
Bench (release, n=5000): SelectionState::clone 39-68ns (64pts) /
11-22ns (0pts) vs Arc::clone 7ns — 5-9x on the hot path.
Tests:
- selection_is_arc_not_refcell: asserts type_name contains Arc
- bench_selection_state_clone / bench_selection_arc_clone / bench_selection_state_clone_empty (ignored, release)
Make palette rows fill the available panel width while reserving an embedded scrollbar lane. Keep the final row aligned with the 16-column grid.\n\nFixes #968
Replace the 8 owned clones in StyleContext construction (4 Vec<String>
+ 4 String) at ribbon/mod.rs:568 and :1059 with borrowed refs.
StyleContext is now StyleContext<'a> with &'a [String]/&'a str
(widgets.rs:313), RenderCtx holds &'a StyleContext<'a> (:633),
and call sites pass &self.x instead of .clone(). The view-local
borrow is valid for the duration of Ribbon::view() and the style
dropdown overlay.
TDD: RED style_context_tests failed E0308 (owned vs borrowed),
GREEN added lifetime and updated 4 type sites + 2 construction sites.
Centralize the 7 byte-identical `muted_style` helpers (alpha 0.68)
previously duplicated across src/ui/style/* into a single
`src/ui/style/common.rs::muted_style` (+ alias `muted_text_style`).
All 7 style windows and the style_manager wrapper now call the
common helper, ensuring a theme palette change updates one place.
`btn_s` is intentionally NOT deduped: plotstyle.rs:41 and
style_manager.rs:299 have divergent bodies (Disabled handling +
text alpha 0.45). Unifying would silently change plotstyle
disabled appearance : documented in common.rs and covered by test.
TDD: RED `common_tests` failed E0433 (missing common), GREEN
added common.rs and wired `pub mod common`, REFACTOR replaced
locals with `use crate::ui::style::common::muted_style`.
Tests:
- common_muted_style_matches_local_copy: asserts common output equals 0.68 alpha reference
- common_muted_text_style_alias_matches: alias identity
- btn_s_bodies_documented_as_divergent: documents intentional non-dedup
Replace manual key entry with per-row capture cells: clicking + Add
inserts a draft row at the top with its key cell armed, and the next
key combination is recorded and normalized (Ctrl+Shift+S →
CTRL+SHIFT+S). While armed, a dedicated keyboard listener swallows all
input so recorded shortcuts do not execute in the drawing.
Draft rows are transient and confirmed only through an explicit accept
button, so the table never retains empty rows. Duplicate keys and
unrunnable commands are flagged in danger styling with a persistent
warning naming the conflicting command. Added reset-to-defaults with
confirmation, apply-and-exit, a shortcut count, and an unsaved-changes
guard on close.
The themed handle cache (introduced in cc430cdb) keys entries by (address, length) of &'static [u8] art. However, the art was declared as const; Rust may inline distinct copies of a const at each use site, giving the same logical icon different addresses. This broke cache lookups for wrapper functions (e.g., themed_arrow_down) that refer to the same icon from a different module than the cache test. Convert the ~30 themed-relevant byte slices (TRI_*, HOME, UNDO, REDO, CHECK, etc.) to static so each artwork has one stable address process-wide.
Also refactor themed_handle to drop the immutable borrow before building a miss handle, preventing a reentrant call from panicking on a second borrow_mut.
Adjust themed_cache_tests to use delta assertions and per-test cache removal for isolation, and add coverage for second-call cache hits, wrapper delegation, and the length component of the key.
Test: ui::icons::themed_cache_tests::themed_cache_returns_same_handle_for_same_bytes
Test: ui::icons::themed_cache_tests::themed_cache_caches_distinct_bytes_separately
Test: ui::icons::themed_cache_tests::themed_cache_second_call_is_a_cache_hit
Test: ui::icons::themed_cache_tests::themed_wrapper_populates_cache_for_underlying_bytes
Test: ui::icons::themed_cache_tests::themed_cache_key_includes_length
Test: ui::icons::themed_cache_tests::themed_cache_speedup_over_uncached_handle_creation
Improve the selection-cycling list box so overlapping objects can be
identified at a glance:
- Add a color swatch per row showing the object's effective drawn color
- Show the layer name right-aligned next to the element type
- Size the popup to fit its content with consistent padding
Widen render_style_for_viewport visibility from scene-internal to
crate-wide so the view layer resolves the same color the renderer uses.
Style selectors (Standard, layer, Color/Linetype/Lineweight) sat at
different heights across ribbon panels because each combo panel
vertically centered its content: panels with fewer icon rows
(Multiline Text, Table) centered their dropdown differently than
panels with two rows (Dimensions, Multileader).
- Pin all combo panels (Layers, Properties, style combos) to the top
of the fixed 3-row panel with a shared COMBO_PANEL_PAD, so every
primary dropdown shares one baseline regardless of icon-row count
- Extract the duplicated tool-row and panel-container code into
tool_row() / combo_panel_col() helpers + named spacing constants
- Bundle the per-view render state into RenderCtx, shrinking
render_large/render_large_dropdown from 12-14 positional args to
(item, &ctx)
- print_to_printer: silence the Windows-only dead-code warning on
PrintOptions::quality with the platform split documented (the field
is read by the CUPS `lp -o print-quality` path)
ramox81