A DWF sheet or DGN model is drawn as world-space wires (one line wire per
colour and width, one fill wire per colour) instead of a raster rescaled
to the view, so it stays sharp while zooming instead of showing pixels
until the raster is made again. Colours go through the colour table
mapping, contrast, fade and monochrome; clip boundaries clip the wires.
The wires are drawn and plotted but neither picked nor snapped; the
underlay's own snap geometry still serves object snaps.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- The Frames list shows the drawing's frame state (hide / display and plot /
display but not plot / frames vary), follows commands, undo and document
switches, and lists the mixed state as a disabled item.
- DWFFRAME and DGNFRAME are frame variables of their own, kept in the header,
and FRAME sets them with the others.
- Out-of-range frame values say "Requires an integer between 0 and 2." and
ask again; a set value reports "Regenerating model.".
- IMAGEFRAME is stored in the image variables as bits (2 is written as 3) and
a drawing without them uses the profile value, which setting IMAGEFRAME
updates and the settings file keeps.
- Raster images, PDF underlays and wipeouts are picked on their frame only;
underlay snap geometry is never picked.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The reference follows the cursor while its insertion point, scale or
rotation is asked (preview-only PScale/PX/PY/PZ/PRotate included); a
relative path chosen before the drawing had a file becomes relative on the
first save, and relative paths start from "./" at or below the drawing's
folder; -XREF name options report "No matching xref names found.".
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Grid snap locks to SNAPUNIT instead of magnetizing; snapped 3D points keep elevation instead of flattening to z=0. New SnapTypes Vertex/EdgeMidpoint/FaceCenter/Knot/FacePerpendicular/NearestFace with their own F4 master toggle and mode set, tiers, and markers, fully independent of the 2D master. Solid B-rep corners/edge-midpoints/face-centers from mesh edges and kernel faces, spline knot points, and live perpendicular/nearest-to-face on mesh triangles merged priority-aware in move/click paths. Drafting Settings 3D Object Snap tab is fully live (was dead placeholders); Nearest-to-face off by default. TDD: behavioral LINE-to-solid tests plus engine/scene unit tests.
Switching to a Layout re-tessellated the whole model — `memo_miss=186455`,
2034 ms — to arrive at geometry identical to what was already in the memo.
The only thing that differed was colour.
`local_wires_for` already knows this: it stores the raw colour and drops
its background argument with `let _ = bg_color;`, noting that
`Batches::finalize` applies `adapt_to_bg` last, "so the cache no longer
has to rebuild on BACKGROUND / layout-switch". The tessellation memo's
guard had not been told, and still mixed the background in, so every
entry was discarded on a switch.
`finalize` now records what its colour resolution consumed — the raw
colour, the raw glyph colours, and the three flags it branches on — as
`WireModel::bg_adapt`, and `resolve_colors_for_bg` replays it for another
background. The guard drops the background, so a memo entry serves any
layout.
The resolution recomputes from the recorded raw colour rather than from
the resolved one, which makes it idempotent and therefore safe over a set
that mixes memo hits with freshly tessellated misses. Re-adapting the
resolved colour would not be safe: `adapt_to_bg` snaps a near-white colour
to pure black on a light background, and pure black comes back pure
*white* on a dark one, losing the tint. A test pins that asymmetry so the
raw colour is not optimised away later.
The contract is tested against the real `finalize` rather than a copy of
its logic: for every background pair, building under one and resolving for
the other lands exactly where building under the other would have.
`bg_adapt` is `None` for wires built anywhere else, and the resolution
skips them, so nothing outside the block cache changes colour. It is also
`None` when the resolution would be a no-op — a preserved colour with no
canvas fill looks the same under every background — which keeps the common
case at no cost.
Ordering is unchanged: the pass runs inside the builder, before
`append_scene_markers` and `apply_refedit_fade`, both of which have their
own separate background dependency.
`wires-build` gains `colors=` so the pass has a number of its own.
Co-Authored-By: Claude Opus 5 <[email protected]>
Share source buffers across block placements and render nested content with GPU instance transforms.\n\nChunk silhouettes and compact mesh material data so large drawings stay under device buffer limits and remain responsive.
Each entity built its own, and what they offered had drifted apart from
what the geometry actually has:
- An arc offered no quadrants at all. It now offers the ones its sweep
covers, and no more.
- A spline offered its control points as endpoints. For a control-point
spline those are not on the curve, so the cursor landed in empty space
beside the geometry. It now offers its two real ends and its midpoint,
with the fit points — which are on the curve — still on offer.
- An elliptical arc had no midpoint and no ends.
A new SnapHint::Endpoint carries an end that cannot go in key_vertices.
Consecutive entries there are taken to be joined by a straight segment
and their midpoint offered, which is right for a line or a polyline and
wrong for anything curved: an arc's two ends would also produce a snap
out on the chord. Splines lose their key_vertices for the same reason —
the chord between two fit points of a curvy spline does not run along
it.
A polyline's midpoints and arc-segment centres stay out of snap_pts
deliberately. The engine already derives a chain's midpoints from its
vertices, and a wire carrying a centre is treated as round elsewhere,
which a polyline with one bulge in it is not.
Co-Authored-By: Claude Opus 5 <[email protected]>
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <[email protected]>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A SOLID's filled quad and a dimension/MultiLeader text background are flat 2-D
overlays that should draw in wireframe and shaded alike, but face3d_gpu
classified fills by `!fill_tris_low.is_empty()` — and a 2-D fill at UTM scale
carries a double-single low residual for precision just like a real 3-D mesh
face. So the arrowhead fill and the "5;8" cyan text background were routed to
the 3-D buffer and only appeared in shaded mode, vanishing back to nothing on
return to wireframe.
WireModel now carries an explicit `fill_is_3d`: true only for a real surface
(PolyfaceMesh / PolygonMesh face, set in the tessellator), false for every flat
overlay fill. face3d_gpu classifies on the flag, so 2-D fills stay in the
always-visible buffer while keeping their low residual (and UTM precision).
Verified on budweiser: the `_BoxFilled` arrow SOLID and the dim '5;8' MTEXT
background both tessellate with fill_is_3d = false.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A wide polyline draws a solid band, but hit-testing only ever saw the
centreline 8 px out, so a donut could only be selected by clicking the
phantom circle inside the disc it paints. `self.hatches` — the map the
hatch pick channel walks — is filled from HATCH and SOLID alone, so the
band `wide_fills` produces was drawn (via `synced_hatch_models`) and never
picked.
The band rides in on `pick_tris`, the same channel a thickness wall uses:
`wide_fills` already computes it, so it costs one tessellation and inherits
the block transform. It ear clips rather than fans — an arc band is an
annular sector, concave on its inner edge — reusing `triangulate_planar`.
Wiring `pick_tris` through `Lines` alone was not enough: a plain wide
polyline leaves `to_truck` as `Contour`, and a PLINEGEN=0 one as
`SegmentedLines`. Both now carry it.
This needs the wire's cullable box to cover the band, and it did not.
`bounding_box()` boxes a polyline's stored vertices, knowing nothing of the
width painted around them: a donut's two vertices sit on one horizontal
line, so the box had zero height and rejected every click on the disc
before any triangle was tested. Every site that stamps the entity box onto
a wire now goes through `set_wire_aabb`, which widens it over `pick_tris`
(a no-op for the entities that have none, which is nearly all), and the
block cache chains `pick_tris` into its own box for the same reason.
That box was already too small for the centreline itself — an arc leaves
the vertex box — so a donut was unselectable at its top and bottom at
enough zoom. Widening fixes that too.
Verified end-to-end: tessellate a width-0.5 donut on a 0.05 centreline
radius, then `click_hit` five points 20 px clear of the centreline — all
land, and a click outside the disc still misses.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Review follow-ups to #390, which fixed PDF/print text for model space but
left the layout-plot path — the one issue #385 was filed from — broken.
viewport_content_wires rewrote points/snap_pts/key_vertices/aabb and then
cloned text_verts through untouched, so paper-space viewport text stayed at
model (UTM) coordinates: a dimension at model (25000, 12000) plotted its
lines onto the sheet and its glyphs kilometres off the page. A text-only
wire fared worse — TEXT/MTEXT carry no stroke points since text went
SDF-only, so it was dropped outright by the empty-clip and AABB rejections.
Project the glyphs through the same proj_abs the snap points use (via the
existing map_text_verts helper), cull per glyph on the quad centroid, count
them towards the paper AABB, and dim them like the wire colour.
Also in emit_text, which diverged from the wire pass it mirrors:
- divide the pen by `scale`, or a Fit/windowed plot prints text as
near-invisible hairlines while its own lines stay correct;
- apply the CTB plot style, or a monochrome.ctb plot renders the lines
black and leaves the text on its screen colour;
- reset the dash pattern, which is persistent PDF state the wire pass
leaves set — a HIDDEN-linetype last wire printed glyph outlines dashed.
export_table's doc claimed it honoured TEXTFILL and widened the bold pen
itself; it did neither. Gate fill_tris on textfill() so hollow-on-screen
text exports hollow, carry the bold flag and widen the pen by the 1.7x the
bake uses, and resolve Face once per family instead of once per glyph (the
atlas mutex is held for that whole walk).
uv_key identifies a glyph by its tile's uv_min, but grow_height rescales
every entry's V and reset rewinds the packer, leaving already-built quads
addressing the wrong tile — garbage on screen and a silent miss in the
export table, i.e. #385 again under #347's grow-the-atlas conditions. Bump
an atlas generation on both and fold it into the tessellation memo guard so
the text re-lays-out instead. Quads built earlier in the same pass that
grows are still stale for that pass; the guard heals them on the next one.
Tests: the integration test's "some wire has text_verts" assert passed on
pre-fix code too (the exporter ignored them; the scene always carried
them), and its dimension half was satisfied by the TEXT alone — assert per
entity handle instead, and stop colliding on fixed names in the shared temp
root. The unit test's bbox came from the same quads the mapping reads, so
it held by construction; pin the run's own world box instead. That still
cannot catch a mirrored corner assignment — verified by mirroring it — so
say so rather than claim coverage the assert doesn't have.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Command previews (MOVE, COPY, ROTATE, SCALE, STRETCH, MIRROR, ARRAY,
PASTE, INSERT) build ghost WireModels via WireModel::translated/rotated/
scaled/stretched/mirrored, but those helpers moved only `points`, never
`text_verts`, and the ghosts' glyphs were never uploaded — so text
vanished (or froze at its source) during the preview, same root cause as
the grip-drag case.
Transform text_verts alongside points in all five helpers (shared
map_text_verts, reconstructing + re-splitting the double-single world
position), and gather preview_wires' glyphs into the per-frame
preview-text buffer in the render path. This covers every command
preview automatically. The grip-drag else branch no longer sets
preview_text explicitly (the render gather handles it); the grip-slide
fast path keeps its own scene.preview_text channel (empty preview_wires,
so no double-draw).
MIRROR honours MIRRTEXT: on -> true glyph mirror via mirrored(); off ->
readable relocation via translated().
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rearchitect SDF text from a document-wide collector to per-entity
production during tessellation, so each entity owns its glyph quads and
composite/nested text is covered for free (no re-explosion, no per-frame
document walk).
- WireModel gains `text_verts`: glyph quads ride on the wire, so they are
cached by the tess memo, cloned on hit, and transformed by the block
expand loop exactly like `points`.
- Text arm (tessellate.rs) builds the quads when SDF is on and suppresses
the strokes; render gathers text_verts from the viewport wire set
(`gather_text_verts`, cached on wire content id) — the old collector is
removed. Covers model, dimension, table, block-internal and paper-sheet
text uniformly.
- MLEADER text (lays out via layout_mtext, not the Text arm) gets its own
SDF branch driven by the per-run GlyphRun.
- Pick box comes from the rendered glyph quads (true text extent), not
entity_aabb which mis-places the box for MTEXT; composite paths no longer
clobber the empty text wire's tight AABB (dim pick box hugs the text).
- Selection / hover highlight via a text-highlight overlay (upload_text_
highlight, keyed on selection_generation) mirroring the selected-wire
xray overlay; base glyphs stay neutral so a deselect leaves no stale tint.
- Debug: env OCS_TEXT_BOX draws each run's glyph-bounds rectangle.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Root cause: the glyph tessellator advanced the pen by advance*width_factor
while the transform already scales the pen position by the width factor, so
a backward (negative width factor) run kept its word order and grew on the
same side of the anchor instead of mirroring across it. Advance in unscaled
glyph units to match text_local_bounds; the transform applies the factor once.
On top of that:
- The renderer honours the entity's own text-generation flags (DXF 71: bit 2
backward / bit 4 upside-down) XOR the text style's flags, and signs the
horizontal anchor by the width factor so Center/Right backward text mirrors
about its anchor.
- MIRRTEXT on: a MIRROR toggles both group-71 bits so the reflected rotation
renders a true glyph mirror (backward-upright for a vertical axis, flipped
for a horizontal one).
- MIRRTEXT off: the text flips left<->right and lands mirror-symmetric to the
source (right-reading) instead of hugging the axis.
- The MIRROR preview re-derives text ghosts to match the commit; mirrored()
now reflects the double-single residual too.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Computed snaps (midpoint/nearest/perpendicular/intersection/extension/
apparent/grid) reconstructed the snap point from f32 `wire.points`
(absolute high half), so at UTM-scale they landed ~0.5 m off the geometry
while endpoint/center (sourced from f64 key_vertices/snap_pts) stayed
correct. Now they rebuild each vertex from points + points_low (the
double-single low residual) and run the geometry in f64:
- snap() cursor + geometry helpers (nearest_on_segment, perp_foot,
seg_intersect_xy, extension_snap) are DVec3; wp_f64() reconstructs each
vertex; midpoint uses f64 key_vertices directly (was downcast to f32).
- snap callers pass the precise DVec3 cursor.
Snap capture at deep zoom: the wire-AABB cull compared a sub-millimetre
snap radius against f32 bounds quantized by ~1 ulp (~0.7 m at 5.7e6),
wrongly excluding wires under the cursor. Pad the cull by the bound's own
f32 quantization so it never rejects an in-range wire.
Rubber-band previews (line/circle/arc/ellipse/rect/polygon) built f32
absolute points with an empty points_low, so the wire pass (relative-to-
eye) drew them ~0.5 m off the cursor at UTM. Add WireModel::solid_f64,
which splits f64 points into the double-single high/low pair; previews now
track the cursor exactly.
Known: snapping at extreme zoom on large drawings spikes CPU (per-move
snap cost) — deferred.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
WireModel/LocalWire/BatchEntry key_vertices are now Vec<[f64; 3]>;
tessellation keeps them in f64 (no f32 cast at offset subtraction),
producers (dimension, leader, multileader) build them from the acadrust
f64 source, the block-cache transform keeps f64, and the face3d Face3D
quad path splits them into the double-single (high, low) pair. Consumers
(snap endpoint/midpoint, xclip) read via f32 at the leaf. Still
offset-relative (inert); endpoint/midpoint snap is no longer f32-capped.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
WireModel/LocalWire/TruckEntity snap buffers and the producers/consumers
now carry snap candidates as DVec3 (offset_snap_pts, dimension/multileader
producers, block-cache transform, pick/xclip, snap module). Still
offset-relative, so behaviour is unchanged — this just lets the snap
transport survive the upcoming switch to absolute coordinates without an
extra f32 quantization. The snap module still resolves in f32 (as_vec3 at
entry), matching today's precision.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Table / PolyfaceMesh / greek-text / mleader-background fills go through
the face3d pipeline; their vertices were single f32 and quantized at UTM
scale. WireModel now carries a fill_tris_low residual (filled by the
tessellate Lines path), Face3DVertex gains position_low (location 3), and
face3d.wgsl reconstructs the eye-relative position from the pair. 3DFACE
quads built from key_vertices use a zero residual (no low source).
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Foundation for double-single positions: WireModel now carries an
index-paired f32 residual buffer (`points_low`) next to the existing
`points` high half. Empty means "all-zero residual", so every existing
constructor (interactive draw, previews) is unchanged in behaviour;
tessellation from CAD f64 will fill it in the next steps so vertex
precision survives at UTM-scale coordinates.
Co-Authored-By: Claude Opus 4.7 <[email protected]>
Solids (meshes) now tint on rollover and selection: hover washes orange,
selection washes blue, with selection winning when both apply. Meshes
re-upload their tint when the highlight set changes, and the rollover pick
now also hits shaded solid bodies and hatches (mirroring the click-select
order: wire → hatch → block hatch → solid).
Wires get the same scheme: the selection xray overlay recolours selected
entities blue and the hovered entity orange (previously both blue). Drops
the now-unused highlight_handles union helper and its cache.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Neutralise vendor references in comments to plain behavioural descriptions
(object acquisition / object snap). Remove the PICK_HIGHLIGHT and
PICK_HIGHLIGHT_DIM wire colours: their only consumer was the stripped
storm-sewer add-on, and the retained plugin acquisition pathway draws the
ObjectPick snap glyph and per-command hover previews instead, so the
constants are dead.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Remove accidental dead code (unused imports, the superseded paste tool()
helper, a never-read TORIENT handles field, a duplicate let binding, an
unneeded mut) and mark intentional-but-unwired scaffolding with
allow(dead_code): the web-only save_to_bytes, the plugin loadable() probe,
the planned PICK_HIGHLIGHT colours, the DynFieldSpec label, and the layout
ribbon helpers. Native build is now warning-clean apart from the upstream
nom/quick-xml future-incompat notices.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Move the 30 flat modules under src/scene/ into six folders by role:
convert (entity→geometry), text (fonts/shaping), model (render models),
pick (hit-test/selection/grips/xclip), view (camera/transform/render),
cache (block + property caches). pipeline/ is unchanged.
Full path migration — all `scene::X` references become
`scene::<group>::X`, no compatibility re-exports. render.rs items that
were `pub(super)` (parent was scene) become `pub(in crate::scene)` to
keep their original scene-wide visibility.
No behavior change; build and tests are green.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
