A second adversarial round (with empirical reproduction against the
vendored image 0.25) found the budget contract still had holes:
- The probe billed 4 bytes/px, but 16-bit formats allocate their
native layout during decode (8/px for RGBA16 PNG; TIFF stacks ~3x
codec scratch on top). In-budget 16-bit images were falsely refused
with self-contradictory notes, and the decode transient could exceed
the budget the tiers claimed to enforce. The probe now reads the
color type alongside the dimensions and bills the real peak (native
layout + RGBA where they coexist, plus the TIFF codec factor), so
refusals are honest and per-platform-correct, and the TIFF allowance
follows the same accounting.
- GIF: the probe reads the LOGICAL SCREEN, but a crafted frame may
declare itself arbitrarily larger (empirically: a 10x10 probed
screen with an 8192x8192 frame — 320 MB and 29 s from a
probe-claimed-400-byte image). The GIF frame buffer is now capped
to the probed size plus slack; frame bombs refuse like any other
oversize.
- Remote bodies on web streamed incrementally with the 64 MB cap
enforced DURING the read (array_buffer() materialized a hostile
chunked reply in full before any check could fire), aborting and
cancelling the reader the moment the cap is crossed.
- Degenerate raster entities (zero/non-finite size or vectors) no
longer produce NaN placement math that aborted whole PDF exports —
they resolve to the broken-reference placeholder.
- Same-name resolution now has a deterministic winner (newest
registration, via insertion order) instead of HashMap iteration
order; URL query strings no longer break by-name matching; the
image pick matches its refusal note by the quoted file name
(substring collisions like a.tif/2011.tif attributed errors to the
wrong file); a dropped remote outcome at the queue cap triggers one
unconditional catch-up re-resolution instead of waiting for another
event; the unknown-size refusal says so instead of printing 0x0;
and the build script fails cleanly when there are no fonts to
verify.
(cherry picked from commit c6db94e8)
Ported onto main (#1717 review): the build-web.sh hunk stays out with
the wrapper; the new messages are cataloged (image refusal under the
file group it is looked up in, plus the extraction cap, shared-copy
warning and plot-preview task title that were missing), and the web
SAVEALL failure reuses the existing SAVEALL message.
The final holistic + quality audit (three reviewers) returned GO with
four majors; all fixed.
- Start-page recents were the last unguarded writer of the open slot
on web: clicking one under the open overlay clobbered the in-flight
open and silently lost its bytes. Refused with the same in-progress
notice the picker uses.
- The web quit-after-save continuation stalled: a Quit pending now
survives the tab-save AND continues — offering to save the next
dirty tab or finishing the quit, mirroring native.
- Data-extraction's multi-file pick is capped (16): every picked file
becomes a full parsed document held for the session, and one giant
pick could exhaust the wasm heap.
- The xref registry tests raced each other on the process-global
registry (reproduced 3/10 at high thread counts — CI roulette); they
now hold a module-level guard.
Minors: the collision warning is cataloged in all 21 locales; the
docs' parallelism detail header no longer contradicts its own table;
the drop-filter and name-hash helpers gained inline tests (their only
prior coverage was a verbatim copy in the red-team suites).
(cherry picked from commit f70d3fda)
Ported onto main (#1717 review): the collision message is filed under
the file group it is looked up in (it sat under view), the data-link
warning reuses that cataloged text, and the command-reference string
that rode along in the locale hunks stays out.
WBLOCK, SAVEALL, and web ARCHIVE now serialize through the Web Worker
like SAVE/AUTOSAVE: prepare on the main thread, writer pass on the
worker, inline fallback on any worker failure. SAVEALL clears each
tab's dirty flag under the same unchanged-tab race guard the single
save uses; ARCHIVE assembles the ZIP in the completion handler so the
transmittal matches the snapshot taken at command time.
The review of the previous fix commit found the collision refusal
still REPLACED the registry bytes — the exact silent retargeting it
was meant to prevent. The refusal now keeps the old registration, the
extraction settings picker reports refused picks in the wizard's error
slot (previously silent, and the stale collision flag could surface as
a wrong-file warning on an unrelated browse), and the xref registry's
same-name ambiguity is documented as a browser fundamental (native
distinguishes by folder): newest registration wins consistently for
resolution, ARCHIVE, and XRELOAD — matching what the drawing displays.
Also: the Quit pending-close survives a successful web tab-save
(continue the quit instead of dropping it), the last ZIP64 sentinel
(central size) is rejected like the other four, and the new behaviors
gained regression tests (collision keeps old bytes, registry eviction,
including the deadlock fix for the guard-scoping that test exposed).
(cherry picked from commit b635d56c)
Ported onto main (#1717 review): ARCHIVE and SAVEALL serialize
document_for_save() like a single web Save; the ZIP is built with the
zip crate; WBLOCK keeps its native background-task title.
Full verification of the XREF/data/ARCHIVE/worker wave (three
reviewers, one forensic) found no blockers and no crossfire damage;
five majors and several minors are fixed here.
- ARCHIVE now packages XREFs: the bytes registry added by the same
commit is consulted (the in-code 'no xref store exists' comment was
false within the commit), and the drawing is packaged only after
the full save preparation — without it kernel solids shipped
without their ACIS data.
- PendingClose stores the stable tab id instead of a vector index:
the web save now completes asynchronously, and closing a lower tab
during the serialization window shifted indices — closing the WRONG
tab, or panicking on a stale one. All producers and consumers
resolve the id at use.
- The xref bytes registry is capped (6 entries, oldest evicted): every
open, drop, and pick registered full drawing bytes with no bound —
an OOM waiting to happen. Reopened recents register too, so any
entry path can serve as another drawing's xref.
- A re-picked data-link source with the same name but different bytes
no longer silently replaces the first (the browser hands back bare
names, so two same-named files collided and every reference read
the newer pick): the pick is refused and the user is told why.
- The unresolved-xref warning lists file names (what to drop on the
page), not internal block names; the ZIP writer refused the ZIP64
sentinel values (0xFFFF counts, 0xFFFFFFFF sizes/offsets) instead
of emitting archives that send strict readers hunting for a ZIP64
EOCD that is absent; docs note the worker-side saves.
Known follow-ups documented, not fixed here: the serde-skipped
ExtendedEntity/CadDocument raw bytes still drop on worker crossings
(needs codec accessors — upstream), and WBLOCK/SAVEALL/ARCHIVE
still serialize inline (the worker route is a small follow-up).
(cherry picked from commit 6f429f24)
Ported onto main (#1717 review): main already keys PendingClose by tab
id, so those hunks stay as on main; the ZIP64 guard is moot with the zip
crate; the unresolved-xref names split on both path separators, since
Path does not split Windows paths in the browser build.
The last four big web-vs-desktop gaps.
XREFs: XATTACH reads the picked drawing's bytes and registers them
name-keyed (the image/PDF-underlay pattern), pre-parses on the web
worker, and the commit merge produces the same xref block flow as
native. Opened drawings resolve xrefs from the registry (trailing-name
match) before cache build; unresolved references produce ONE warning
listing the names and the fix — drop the referenced files on the page
(drops and picker opens now register their bytes) and reopen or
XRELOAD. XRELOAD works off the registry on unsaved drawings too.
Data Link & Extraction: spreadsheet links read picked xlsx/csv bytes
(calamine from slices / CSV from string) through a session registry,
so preview, refresh, and table-insert work on web; extraction takes
external drawings via a multi-file picker parsed on the worker, and
outputs CSV/TXT/.dxex via download_bytes. The disabled 'Add folder'
button explains why.
ARCHIVE/ETRANSMIT: assembles the drawing plus registered images, PDF
underlays, and session plot tables into a ZIP delivered as
{stem}_transmit.zip; skipped dependencies are reported by name.
Save/autosave off the UI thread: the parse worker gains a serialize
action (protocol v5) — the document is prepared once on the main
thread (clone, styles, dimension bake), then the DWG/DXF writer pass,
the dominant cost, runs on the worker; any worker failure falls back
to inline serialization with the identical shared implementation.
The save path also clears the dirty flag only when the tab didn't
change mid-write, and the runtime-fields sidecar now carries
graphic_data, fixing a pre-existing loss of raw DWG round-trip bytes
on web-opened documents.
(cherry picked from commit 2e100634)
Ported onto main (#1717 review): the new ocs_save crate builds on the
pinned codec; the hand-written ZIP writer is replaced by the zip crate
already in the tree; ARCHIVE packs registered xref bytes too and
serializes document_for_save() like a web Save; the web save prepares
document_for_save() (prepare_document_for_save now takes the copy by
value, so no second clone); the wasm resolve_path consults the xref
registry, so every reference lookup — not just resolve — finds dropped
files; XRELOAD keeps main's undo, unload and stale-baseline handling;
native data extraction streams the source drawings one at a time.
A fresh web-vs-desktop audit found the remaining gaps; this closes the
top ten.
Raster images: IMAGE attach read the picked file via image::open on a
name-only path (dead on wasm), and raster references inside opened
drawings decoded the same way. Picked bytes are now registered in a
name-keyed store (the PDF-underlay pattern), decoding runs from memory,
and dropped .png/.jpg/.bmp/.tif files register by name so unresolved
references in opened drawings re-resolve and render (and export to PDF).
Command gaps fixed with the bytes-at-pick / download_bytes pattern:
- WBLOCK now downloads the extracted block instead of failing on fs.
- SAVEALL saves every dirty tab instead of printing a no-op message.
- SCRIPT picks and reads the .scr file through the browser picker.
- CENTERLTYPEFILE picks the .lin/.dnl file and populates from text.
- Custom .ctb tables picked on web now parse, register for the
session, appear in the plot dialog list, and apply (load_named
previously returned builtin-only on wasm).
- LAYTRANS 'Load standards file' parses the picked drawing on the
existing web worker.
- INSERT 'from file' in the block palette parses picked bytes and
feeds the shared import path.
Text fidelity: TTF-named styles rendered as thin stroke glyphs on web
because the font database was empty. Fetched Noto faces are now
registered into it with a family alias table (Arial, Times New Roman,
Cambria, ... -> Noto Sans/Serif), so those styles render filled, shape,
export to PDF as vector fills, and appear in the style picker.
ViewCube labels request semibold again on web.
docs/native-vs-web.md: the hatch and font rows were stale (both work on
web now), the GPU row claimed WebGPU is used where available (the
backend is pinned to OpenGL), and the parallelism row missed the parse
worker — all corrected.
(cherry picked from commit c643a10e)
Ported onto main (#1717 review): conflicts resolved toward main — the
font-file lookup, PDF searchable text, purge service, block palette and
plot-style copy stay as they are on main; the web pieces (font registry
and aliases, session plot styles, SCRIPT/SAVEALL/CENTERLTYPEFILE picks,
block-from-file on the web) are layered on top.
Three attack agents (state-machine tracing, executable input fuzzing,
browser-API review) found two breaks and several degradations; all are
fixed here, with the fuzzer's 22 tests kept as regression suites.
Breaks:
- Untitled tabs (and dot-names like ".dxf") autosave as DXF, but the
restore name defaulted to .dwg — the worker dispatches its reader by
the name's extension, so the only copy of unsaved work could never
be restored and was re-offered forever. recovered_name now uses the
worker's rsplit('.') convention and defaults extensionless names to
dxf, matching new-document serialization.
- " (recovered)" stacked one suffix per crash-restore cycle; the
marker is now stripped idempotently before appending.
- Opening a file (Ctrl+O / OPEN / automation) while a web open was in
flight clobbered it: the in-flight open's bytes were lost and every
queued restore prompt stalled for the session. on_open_file now
refuses while an open is running (web only).
Hardening:
- Escape on the Recover Drawing modal defers instead of deleting the
only snapshot; the Discard button still removes it.
- A cap-rejected restore enqueue warns in-app and re-offers the next
snapshot; the drop queue cap rises to 32.
- Exiting mid-round no longer races snapshot removals (deferrals are
drained, the sweep skips while a round is in flight); closing a tab
with "Don't save" now also removes its web snapshot; the snapshot
key derivation is shared via web_autosave_key.
- The plot-preview overlay no longer leaks a full PDF copy per preview
(the Download closure lives in a replaceable registry).
- A corrupt autosave index.json fails the round/boot instead of
silently resetting every row; plot pages with non-finite or non-
positive sheet dimensions error instead of emitting a NaN MediaBox.
- The drop filter accepts dot-less "DWG"/"dxf" names the worker
parses (same rsplit convention on both gates).
(cherry picked from commit 3eab00bfbf)
Ported onto main (#1717 review): the five standalone tests/*_redteam.rs
files stay out — no test target builds them and they exercised copies of
the functions rather than the code itself.
Second review pass found the restore marker matched WebFileOpened by
display name: any same-named open finishing while the recovered one
was still queued deleted the only copy. The snapshot key now travels
with the queued file (tagged queue entries), the marker records the
open id assigned at dispatch, and success, failure, and cancel all
match that id. Cancelling an unrelated open no longer clears a
pending restore marker.
Also: the boot scan removes dead index rows (missing or zero-byte
snapshot files) that no other path could discard, and the drop
listener install only latches when the listeners really registered.
(cherry picked from commit c8777a857b)
Review of the drop-open and autosave commits surfaced one blocker and
five majors; all are fixed here, and two claims in the autosave commit
message are corrected by this one: tab close does NOT clear a snapshot
(matches native .sv$ semantics — saving, restoring, discarding, exit,
and the capped boot scan do), and serialization runs on the main
thread between awaits, not off the paint path.
- The restore prompt can no longer appear with no entries (empty
"Recover Drawing" modal on every boot once the autosave dir exists).
- Restore no longer consumes the snapshot before the open succeeds:
the recovered drawing goes through the guarded drop queue, and the
snapshot is deleted only after the tab opens; cancel or parse
failure keeps the only copy.
- Saving during an autosave round defers its snapshot cleanup until
the round finishes, so a stale round can no longer resurrect a
snapshot newer than the save.
- The boot scan no longer deletes snapshots by mtime comparison
(re-opening a drawing refreshes the recent copy's mtime, which
silently destroyed wanted snapshots); GC is now a 16-entry cap with
oldest-first eviction.
- OPFS write failures abort the writable stream (a leaked lock could
stall the same-key writer and disable autosave for the session), and
DOMException errors now carry their name/message.
- Empty (crash-window) snapshots are never offered; an unreadable one
warns and stays discardable instead of looping forever.
- Drop-open polish: reads start inside the handler and complete in
drop order (legacy WebKit safety, deterministic multi-file order),
dragenter is canceled too, the install guard only latches on
success, non-drawing drops don't steal propagation, a lock-poison
panic can't cross into JS, and re-dropping an open drawing no
longer risks clobbering an in-flight open (it re-queues).
- The model-space sheet floor is per-axis (a thin 8x400 mm profile
keeps its length) and centers content on the enlarged page.
(cherry picked from commit 3edbc5b7c8)
The web build had no autosave: on_autosave was a no-op and the
subscription was native-only. Both gates are gone; every savetime tick
now serializes each dirty tab (same pre-serialize sync as the web save
path, no thumbnail, serialized serially off the critical paint path)
into a dedicated opencadstudio-autosave OPFS directory, keyed by
drawing name, without touching the dirty flag, downloads, or recents.
On boot the web app scans that directory and offers any snapshot
newer than the last saved copy in a localized Recover Drawing modal
(Restore opens it as "name (recovered).dwg" through the standard
open pipeline; Discard removes it; Escape discards). Saving or
closing a drawing clears its snapshot; the boot scan also garbage-
collects stale entries. run_web now requests navigator.storage.persist
so settings and OPFS data survive browser eviction.
(cherry picked from commit 101d167ebc)
STLOUT/STEPOUT wrote via std::fs and IMPORTOBJ read via std::fs, all
of which fail on wasm32. The export pickers now mirror the PDF path
(pick_*_owned returns a name-only PathBuf; the browser download names
the file) and the write tail swaps fs::write for sys::download_bytes.
OBJ import reads the picked file's bytes directly, like the web open
picker.
Opening by drag-and-drop was dead on the web build: winit never emits
FileDropped there. A wasm-gated io::web_drop module installs DOM
dragover/drop listeners, filters .dwg/.dxf, reads the File bytes
async, and queues them; the existing 50 ms PollWebControl tick drains
the queue into the same open path the picker uses (progress overlay,
recovery, OPFS recent cache).
Also floors the model-space plot sheet: extents smaller than 10 mm
(or the 0x0 paper a fresh unsaved drawing carries) now fall back to
the standard sheet instead of producing a ~3 pt page.
(cherry picked from commit ad60be11ed)
Three reviewers (security, correctness, performance) converged on:
- Download PDF died on the second click: Closure::once_into_js throws
when invoked twice. The handler is now a plain FnMut kept for the
overlay's lifetime.
- Rasterisation was bounded by page count, not pixels: 12 A0 sheets at
150 DPI peaked near 1.8 GB of RGBA plus ~1.7 GB of decoded images,
and a drawing declaring absurd paper sizes made the rasteriser
saturate its u16 dimensions into a ~17 GB allocation that aborts the
tab. Preview now computes a uniform DPI under a 64-Mpx total budget
(floor 24 DPI) from the page tree before allocating, with a per-page
4096-px edge clamp.
- Overlays stacked when previewing twice and their blob URLs were only
revoked via Close. The overlay is now single-instance (id-tagged);
a replacement or Close revokes every URL through a shared registry.
- emit_image resampled before probing the XObject cache, so a title
block placed on 12 layouts ran 12 Lanczos passes to embed once.
The cache is now probed with the target dimensions first.
- Preview downloads are named {stem}_preview.pdf instead of a constant
plot_preview.pdf, and the page label says 'first N of M' when the
preview is capped while the PDF keeps every page.
(cherry picked from commit 2a05479d69)
Web builds identify drawings by bare file name (the browser picker
exposes no real path), so two tabs with the same name also share the
single browser-stored copy: the last save silently replaces the other
tab's. Warn on open instead of letting that surface later.
(cherry picked from commit 6306359390)
- plot dialog: the web build defaults to 'Save to PDF file...' (its only
output choice); native dropdowns and defaults are untouched.
- on_plot_dlg_commit forces to_file on wasm so a stale page setup can no
longer route the web build into the (unreachable) printer path; both
preview branches now go through preview_page_pdf, which is identical to
the old inline temp-PDF + OS-viewer flow on desktop.
- Print ribbon / PRINTALL on wasm render the PDF and open it in a tab
instead of erroring; PrintAllPdf picks a virtual path and downloads.
- pdf_plot_options maps the dialog's Quality dropdown into PdfPlotOptions.
(cherry picked from commit 892d693d2d)
- pdf_export: drop the stale wasm32 gates (printpdf 0.9.1 compiles for
wasm; the memchr/lopdf incompatibility is gone with memchr 2.8.3).
Rendering is portable via render_pdf_bytes; only persistence differs:
atomic temp-file write on desktop, browser download on the web.
pick_pdf_path_owned on wasm returns a virtual path so the existing
message flow works unchanged.
- printpdf moves from the native-only dependency table to the shared one.
- print_to_printer: preview_page_pdf / preview_pages_pdf render the same
bytes and open them in a browser tab on the web (the browser's print
dialog takes over); desktop keeps the temp-PDF + OS-viewer flow.
- sys: open_bytes_in_new_tab (blob URL, popup-blocked falls back to a
download).
- New PlotQuality preset caps embedded raster resolution (High = native,
Normal = 300 DPI, Low = 150 DPI effective); vector output is untouched.
The image resource cache keys on the post-resample dims so one pixels
Arc placed at different effective DPIs embeds per-placement XObjects.
(cherry picked from commit 4812bc775d)
Ported onto main (#1717 review): the plot model lives in io::plot; Normal
keeps native pixels like High (only Low caps images at 150 DPI, so desktop
output is unchanged); the searchable TrueType text layer and its allsorts
subsetting now build on the web too; the plot stamp reads the time through
js_sys on wasm.
Resolve conflicts from main's rustfmt pass by taking main's versions of
command.rs, style.rs, view/mod.rs, scene/mod.rs, ui/window/mod.rs and
ui/properties.rs and re-applying this branch's Graphic Attributes changes.
Add the Graphic Attributes strings to the new lo-LA catalog.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01E1QnME6WJbD5iGFae1eeCb
A focused text field reports Status::Captured, so the key dispatch
dropped SPACE and a CUI rebind of SPACE to FINALIZE never ran while the
command line held focus (#1710). Dispatch a captured SPACE as a shortcut
only when SPACE is bound to something other than COMMANDSPACE, so the
default binding still types a space. The closure stays a plain fn, so a
static flag mirrors the binding and is refreshed wherever the bindings
change.
An orthographic preset sets its orthographic UCS while UCSORTHO is on
(*FRONT*, *RIGHT*, …; TOP returns to the world UCS); presets no longer
flip to the opposite view when repeated. -VIEW runs as its own command:
Window asks for the name and corners, sEttings loops over Background,
Categorize, Layer snapshot, live Section, Ucs and Visual style with the
reference prompts and messages, Save keeps the UCS with the view while
UCSVIEW is on and Restore brings it back. UCSORTHO and UCSVIEW are
profile variables.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
On a non-Retina screen macOS draws the interface at 1x, which reads small
on a Full HD monitor, and there was no way to enlarge it. Options >
Display now offers an interface scale of 75–200 % in 25 % steps, applied
through the window's scale factor on top of the display's own and kept
with the user settings. It is a list rather than a slider because the
dialog rescales under the pointer as the value changes.
Fixes#1655
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Swept surfaces made with SURFACEASSOCIATIVITY on keep their profile and
path and are written as a swept-surface action of the drawing's
associative network, reading the profile and path and their scale and
twist expressions. They follow edits of their sources.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Outside macOS a touchpad's two-finger drag arrives as wheel scrolls that
nothing tells from a wheel. A new option (Options, off by default) makes
every scroll pan and Ctrl+scroll — what a pinch sends there — zoom.
Fixes#1560
Co-Authored-By: Claude Opus 5.5 <[email protected]>
COPY and PASTE kept the source's reactors on each copy, so a copied
dimension still pointed at the source's dimension association (and
boundary or group members at the source hatch or group). Another
application reports such a drawing as damaged and, after recovery,
moves the dimensions. A copy's reactors now follow only targets copied
with it; group copies give their members the new group's reactor; and a
drawing opened with such stray dimension reactors has them dropped.
Fixes#1645Fixes#1649
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Conflicts were additions on both sides, kept together: the Count palette
and Sheet Set toggles next to the Graphic Attributes toggle in the ribbon,
main's new locale groups and catalog entries next to graphic-attributes,
and module declarations. The palette code follows main's crate renames
(acadrust -> codec, cadkernel -> kernel).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
- The palette view looks fills up through an index of associative fills
that is rebuilt only when the scene's geometry epoch changes, instead
of scanning the drawing twice per frame. The gradient previews are
cached and rebuilt only when the gradient changes.
- New fills go to the layer of the filled object. A checkbox in the
palette menu ("Create fills on the current layer") restores the HATCH
behaviour and is saved in the config. Objects on locked layers are
skipped with a message.
- The palette is no longer part of the default dock layout; it is docked
below Properties the first time it is shown and keeps a place the user
chose. The original dock test is restored.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VgkJN8DEojuPTumAXLHotu
Display gets a command line text colour (blank keeps the theme's); it
covers history, prompts and the input, while errors stay red. Files
lists the fonts folder that text resolution searches, so .shx files can
be added by hand; opening it creates it first.
Discussions #1493, #1372
Co-Authored-By: Claude Opus 5.5 <[email protected]>
SelectionState now holds view, gesture, input, menu and orbit sub-structs; all 450 access sites updated mechanically with no behavior change. Deletes three write-only dead fields (box_last, box_last_crossing, poly_last_crossing). Hand-rolled clears in commands and dim_viewport route through the new clear methods; bench fixture updated. Full suite: 1976 passed / 0 failed / 25 ignored.
The two per-frame ViewCube blocks rebuilt the named-UCS name list (N String clones plus a Vec) every frame; now Scene::cached_ucs_names memoises it behind ucs_epoch and the picker takes the Arc, so frames cost a refcount bump. Bumped on UCS SAVE, UCS DELETE, RENAME UCS, record-API ucss patch, file-open, and undo Full-swap. Tests: cached_ucs_names_returns_same_arc_until_bump pins the hit path; cached_ucs_names_invalidated_by_bump pins rebuild with new content. Full suite: 1976 passed / 0 failed / 25 ignored.
It stamps sheet set data, which the web build does not have; the wasm
check failed once #1627 split it out of prepare_native_save.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Text styles keep their TrueType typeface through save and reopen (codec
reads and writes the STYLE record's ACAD extended data) (#1633)
- Unnamed shape-file entries no longer show in text style lists (#1634)
- Save As offers DWT 2018; NEW asks for the template to start from, while
Ctrl+N and the quick-access New run QNEW with the default template (#1635)
- An edge next to an earlier fillet of the same radius rounds together with
it (kernel); the solid stays drawn and pickable while edges are chosen
(#1625, #1107)
- A full cache rebuild drops the B-rep cache too, so an undone fillet does
not come back with the next edge operation (#1107)
- Selected solids in shaded styles highlight only their visible edges (#1031)
- VIEW ISO / SWISO / SEISO / NEISO / NWISO snap to the isometric corners
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes:
- Font prompt no longer lists bundled ltypeshp/qcadshp shape files (#1626)
- Wide polylines step at a discontinuous segment width; PEDIT marks the
current vertex; keyword steps refresh the command preview (#1628)
- Radius-0 fillet drops the zero-length segment it left, so the corner
fillets again (#1422)
- FILLET Trim / No trim option (#1558)
- True-colour wires plot in their own colour; colour picker stores the
value it shows (#1621)
- Model tab keeps its page setup; "Save changes to layout" in Model (#1620)
- QNEW default template in Options > Files; .dwt in the open dialog
(#1134, #1113)
- GRIDUNIT / GRIDMODE / PERSPECTIVE variables (#1618, #1524)
- PTYPE (#1433)
- ZOOM nX / nXP (#1465)
- CHSPACE between model and paper space through a viewport (#1428)
- Moving a dimension keeps its automatic text placement
- Shell icon; "&&" button labels (#1554)
- LINETYPE Load from a .lin file (#1588)
- XLINE / RAY hide the crosshair arms (#1437)
- Dynamic-input boxes keep clear of the crosshair and each other (#1546)
- Snap marker colour setting, dark default on light canvases
(#1497, #1229, #1128)
- Dimension style precision as a 0.00 pattern dropdown (#1426)
- Node graph nodes left of the origin no longer clip away (#1592)
- Collapse button in the command history header (#1094)
- Freeze-in-current-viewport toggle in the ribbon layer list (#1466)
- Geometric Center object snap for closed polylines (#1369)
New strings translated in all 21 locales.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
MTEXT draws its stored text instead of re-evaluating fields on every
redraw. Fields update on their evaluation events as the reference does:
open (1), save (2, not autosave), plot (4) and REGEN/REGENALL (16), each
masked with the drawing's FIELDEVAL (variable dictionary, 0-31, with the
reference's prompt and message), and the new UPDATEFIELD command
(selection, attributes of selected block references, "N field(s)
found." / "N field(s) updated."). A Date field (on demand only) keeps
its value until UPDATEFIELD. The FIELDDISPLAY gray box now covers each
field's own glyphs, one box per line it spans, instead of the whole
text. Codec moved to the update_fields / field_spans revision.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A plot stamps PlotDate fields, but the redraw only dropped the host's
own tessellation: an attribute is drawn by its INSERT and a host inside
a block definition by every reference to the block, so both still
showed the old value on screen and in the plotted output. The changed
hosts now redraw through their INSERT / the block's references (block
cache refreshed), without re-tessellating anything else. The codec is
patched to the field format code fixes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The wizard's folder scan, Import Layout as Sheet, the template layout
lists and the drawing cache behind Model Views, Place on Sheet, callout /
label blocks and block previews parsed whole DWGs on the UI thread. They
now go through the shared `background_task` worker: a cache miss reads the
drawing and handles the message that needed it again. Block previews lend
the cached drawing to the preview scene instead of cloning it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A VIEW record's centre is an offset from its target in view coordinates.
Views saved by earlier versions stored the target itself as the centre;
treating that as an offset put them (and VIEW plots) at about twice the
coordinates. One shared `named_view_center` now resolves the centre in
f64 (DVec3/DQuat), taking a centre equal to a non-zero target as the old
convention; VIEW RESTORE, the view plot window and Place on Sheet use it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Afonsop