The codec and kernel repositories and crates are renamed opencadcodec and
opencadkernel. Inside OCS they are depended on under short keys, so code
reads `codec::`, `kernel::` and the new `graph::` (opencadgraph, the node
graph engine). File-format and protocol spellings stay as they were: the
ACIS product id `acadrust`, the ACADRUST_* switches and the plugin
version keys `acadrust_version` / `acadrust_source`.
A button left of MCP on the command line opens a translucent node graph
over the viewport, with a palette of object, input, math, logic, list,
text and geometry nodes added by click or drag. An object node owns
drawing entities and its rows are the Properties panel's own rows for
them: the single-object page is extracted from refresh_properties as
entity_property_sections, values use the control protocol's
property_json, and writes go through set_property_value with a property
target override, so the panel, MCP and the graph share one read/write
path. A list reaching an object row makes one entity per element. Each
graph action is one undo step; the canvas pans and zooms.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The ribbon definition beside each command stays the one source of its
label and icon. One cached lookup (modules::registry::ribbon_commands)
walks the core ribbon and the expanded Draw/Modify panels; the shortcut
list, the right-click menu, the grip menu and the command-line
suggestions read it.
- Context menu: command rows carry their ribbon icon; Undo/Redo and
Isolate use interface glyphs, Draw Order its ribbon icon; icons and
the caret fade on disabled rows.
- Grip menu: Stretch, Move, Rotate, Scale, Mirror and Copy icons.
- Suggestions: an icon column, aligned when a command has none.
- Shortcut list: dropdown entries were read as (label, command) though
the ribbon stores (command, label), so they never got a label or icon.
Reworked from #1449.
Co-Authored-By: MarcelP102 <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Comments and the Options help text describe the behaviour of commercial
solutions without naming any product. The command menu puts the command's
keywords directly under Enter / Cancel, with Recent Input and Snap
Overrides below them, so the choices that change from step to step are the
closest to the pointer.
Co-Authored-By: Claude Opus 5 <[email protected]>
The command menu now follows the commercial solutions' layout row for row: Enter, Cancel,
Recent Input ▸, the command's keywords, Snap Overrides ▸ (every object snap
with its glyph, Mid Between 2 Points, None, Osnap Settings…), then Pan and
Zoom. Pan / Zoom run transparently while a command is active ('PAN,
'ZOOM …): navigation modes leave the command untouched and an interactive
ZOOM Window parks it and resumes it afterwards. Rows carry an icon gutter
so labels align; the Enter row shows a default value ("<0.5000>") as its
hint instead of a second finish row.
ARC gets the commercial solutions' prompt flow with all keywords: start [Center], second
point [Center/End], end; after Center: end [Angle/chord Length]; after
End: center [Angle/Direction/Radius]; Enter continues tangent. The
previous default (Center/Start/End with method codes) stays as ARC_CSE.
Object snaps gain a one-shot "None" override. New strings in all locales.
Co-Authored-By: Claude Opus 5 <[email protected]>
Rows are 22 px (as the grip popup), the edit menu drops Select All and
Zoom Extents (both stay on the idle menu, matching the commercial solutions' edit menu),
and cursor-anchored panels now reserve the overlaid prompt lines
(CLIPROMPTLINES) as well as the input row, so a long menu is never hidden
behind the command area — it scrolls inside the visible canvas instead.
The automation port gains `pointer_right_press` / `pointer_right_release`
actions so scripts and MCP clients can exercise the context menu.
Co-Authored-By: Claude Opus 5 <[email protected]>
The viewport context menu is now built from a pure model
(ui::popup::context_menu) rendered by the overlay: while a command runs it
offers Enter / Cancel / every keyword of the command's options() with the
keyword shown as a hint, a Recent Input submenu and M2P; when idle it offers
Repeat, Recent Input, Clipboard, Undo/Redo with history labels, the edit
block (Erase/Move/Copy/Scale/Rotate/Mirror/Draw Order), Isolate, Pan/Zoom,
selection tools, Properties and Options. The default row is anchored under
the pointer and the menu is keyboard-navigable (arrows, Enter, mnemonic
letters; any other key closes it and types into the command line).
Right-click behaviour is a user preference (Options → User Preferences,
SHORTCUTMENU / SHORTCUTMENUDURATION): shortcut menu (commercial solutions default),
time-sensitive, or the previous Enter-first cycle.
LINE gains options() (Close/Undo/eXit).
Co-Authored-By: Claude Opus 5 <[email protected]>
Improve the selection-cycling list box so overlapping objects can be
identified at a glance:
- Add a color swatch per row showing the object's effective drawn color
- Show the layer name right-aligned next to the element type
- Size the popup to fit its content with consistent padding
Widen render_style_for_viewport visibility from scene-internal to
crate-wide so the view layer resolves the same color the renderer uses.
The status-bar units button wrote INSUNITS, which nothing on screen reads.
INSUNITS only tells the drawing how to scale content arriving from
elsewhere, so picking a unit relabelled the drawing and changed nothing
visible — the selector looked broken because the variable it moved was
invisible.
Point the button at LUNITS instead, the setting that decides how every
coordinate and distance is written, and give the three questions the word
"units" runs together a place each:
- The button offers the five length formats, each shown beside a sample of
itself, so Engineering and Architectural are told apart by sight.
- UNITS / DDUNITS opens a real dialog: length and angle format and
precision, the direction angle zero points, whether positive angles run
clockwise, and the insertion unit. Its sample comes from the same
formatters the drawing uses, so it cannot drift from the readout.
- DWGUNITS converts. Model geometry, viewport framing, the header's length
defaults and each dimension style's scale all move together in one undo
step; paper space is left alone, since the sheet is still the same sheet.
Locked layers are converted too — a half-converted drawing would be at
two scales at once.
The coordinate readout formatted at four decimal places whatever the
drawing asked for; it now goes through the same format_length the
properties panel uses. That made the angle formats reachable in turn, so
degrees-minutes-seconds now carries the d/'/" marks that say which
convention it is, and surveyor's units are written at all.
Typed input is still plain decimal: a length the readout writes as
5'-6 1/2" cannot yet be typed back. ANGBASE and ANGDIR are stored but not
yet applied to displayed directions.
Closes#668
Co-Authored-By: Claude Opus 5 <[email protected]>
Pin Iced 0.15 so dialogs can measure content before distributing the resolved frame across child panels. Keep the web plugin notice compact and non-resizable.\n\nCloses #582
Double-click rename did nothing and ratio edits were lost when switching
scales — and on drawings saved by other programs nothing could be edited
at all.
- Fallback scales were virtual (no Scale objects), so edit/rename no-oped;
materialize the standard set into real staged objects when the manager
opens, reverted on close unless applied.
- On third-party DWGs the mutators walked the root named-objects dict ->
ACAD_SCALELIST, which can be unreachable, and matched dictionary keys
that are internal ids (*A1, A0) rather than scale names. Locate the
scale-list dict robustly and match scales by object name + handle.
- Rename rows inline via double-click; repair a dangling current-scale
header pointer on staged rollback.
- Stage text/mleader style-manager edits on switch so they persist like
the scale manager.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Replace the scale popup's inline delete/add affordances with a single
"Manage scales..." row that opens a proper manager, matching the style
managers: it reuses the shared style-manager palette and chrome (toolbar +
list + editor frame), so it looks and behaves like the Text / Dim / MLeader
managers.
The manager lists the drawing's annotation scales (name + ratio, the current
one checked) and edits them through a Name / Paper units / Drawing units
editor: New adds a scale from the fields, Apply renames / re-ratios the
selected one, Delete removes it (never the current scale), and Set Current
makes the selected scale the model-space annotation scale. Backed by
Scene::add_scale / remove_scale / edit_scale on ACAD_SCALELIST.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The drawing's annotation-scale list (ACAD_SCALELIST) is now editable, so the
set of scales offered by the status-bar scale pill can be grown or trimmed:
- Scene::add_scale / remove_scale create or drop a Scale object and its
SCALELIST dictionary entry (creating the SCALELIST dictionary, and
registering it in the root, for drawings that carry none).
- SCALELISTEDIT gains ADD <ratio> / DELETE <name> alongside the existing
listing (e.g. `SCALELISTEDIT ADD 1:50`).
- The scale popup (model space) grows a delete affordance on each non-active
scale and a "+ Add scale..." row that primes the command line. The current
annotation scale is protected from deletion.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The polar-tracking pill only right-click-cycled 15→30→45→90. Add an
AutoCAD-style angle picker opened from a caret on the pill: presets
90/45/30/22.5/18/15/10/5/1 plus a free-text field for any custom angle,
mirroring the existing units / scale status-bar popups. The chosen angle
persists like the other user settings.
Factor the shared chrome into one `split_pill(main, caret_msg, active,
open)` helper (+ `pill_text_color`) so the OSNAP and POLAR pills stop
hand-rolling the same outer border, background, caret and sizing — each
pill now only supplies its own main region. The caret is sized and
aligned to sit inside the single pill border on both.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
All ribbon dropdowns (tool dropdowns, undo/redo history, and the layer /
colour / linetype / lineweight / style combos) and all status-bar popups
(scale, units, OSNAP, isolate, filter, customization menu, layout list)
now open directly at their widget instead of at a layout-estimated
position, and flip to the other side when the panel would cross a window
edge.
Each dropdown/pill widget is wrapped in a transparent PosReport that
records its screen bounds into a thread-local map on draw. The overlays
read those bounds:
- Ribbon: Ribbon::dd_anchor(id, panel_w, win_w) returns
(align_right, h_pad, top); position_ribbon_dropdown places the panel
below the widget, flipping right-aligned near the right edge.
- Status bar: popup builders take (pill_bounds, win_size) and call
popup::position_statusbar_popup / popup_anchor, opening just above the
pill and flipping left/right at the window edge.
The window size is now tracked (win_size, set on WindowResized). The old
layout estimators compute_dropdown_left / compute_layer_combo_left /
compute_prop_combo_left / compute_history_dropdown_left and
osnap_popup_right_offset are deleted.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Position the snap popup so the anchor point (by the Osnap button) is its
bottom-LEFT corner, opening up and to the right of the button rather than
extending left from its right edge. Pad by the anchor minus the panel
width, clamped so a narrow bar can't push it off-screen.
Refs #248
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The selection-filter popup now has the same Select All / Clear All header
as the OSNAP popup: Select All clears every exclusion (all types
selectable), Clear All excludes every present type. Each button disables
when it would be a no-op.
Also remove the "Object Snap Settings…" footer from the OSNAP popup.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
- Group the flat src/ui/ dir: move the 9 style editors into ui/style/
(dimstyle, mleaderstyle, mlstyle, plotstyle, textstyle, tablestyle,
point_style, style_list, style_manager) and the 6 popups into
ui/popup/ (cycle, isolate, scale, selection_filter, snap, units).
Call sites repointed to crate::ui::style::/crate::ui::popup::; no
compat re-exports. ui/ root drops from 36 to 21 files.
- Rename app/cmd_result.rs -> app/command_driver.rs: the file is the
StepInput->feed_command driver, not the CmdResult type (which lives
in command.rs). Name now matches contents.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
