- src/modules/insert/wblock.rs: extract_block_to_doc() copies a named
block's entities into a fresh CadDocument; extract_entities_to_doc()
does the same for a selection set; layer definitions are carried over
- WBLOCK <name> writes the named block; WBLOCK * writes selected entities
- WblockSave / WblockSaveResult messages drive the async save-dialog flow
- ROADMAP.md: 1.10 WBLOCK marked ✅
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Grid snap (F9):
• snap spacing now tracks the visible grid zoom level — computed via
compute_grid_step() (same adaptive pow-of-5 logic as draw_grid),
updated on every ViewportMove so zooming in/out keeps snap aligned
with the grid lines on screen
Polar tracking (F10):
• configurable angle increment stored in polar_increment_deg (default 45°)
• right-click the POLAR pill to cycle through 15 → 30 → 45 → 90°
• pill label shows current angle ("POLAR 45°")
• visual guide line: while drawing with polar on, a dashed cyan line is
drawn from last_point along the snapped direction across the viewport
• SetPolarAngle message + handler; all polar_constrain() calls use the
stored increment instead of the hardcoded 45°
ROADMAP updated: Grid snap and Polar tracking marked ✅.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
CommandLine now records every submitted command in a recall list (up to
50 entries). Pressing ↑ in the command input walks back through the
list, ↓ moves forward, and returning to the newest position restores
the draft text the user had typed before navigating.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Add VP freeze/thaw toggle columns to the layer panel when in a paper
space layout. Each viewport gets its own column (VP 1, VP 2, …) showing
a freeze icon per layer. Clicking toggles frozen_layers on the Viewport
entity and syncs back to the panel.
- scene: viewport_list() → [(handle, label, frozen_handles)]
- LayerPanel: VpCol + vp_frozen per layer, sync_with_viewports()
- Message::LayerToggleVpFreeze(layer_idx, vp_col_idx)
- Sync VP columns on layout switch, VPLAYER cmd, undo/redo, layer ops
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- STYLE DIALOG / TEXTSTYLE DIALOG opens the Text Style Font Browser
- Three-panel dialog: style list | built-in CXF font list | properties
- Properties panel: font file text field, width factor, oblique angle
- Apply button commits edits; Set Current sets the active text style
- Built-in font picker (20 CXF fonts from assets/fonts/) auto-applies
font to the selected style on click
- Preview pane shows "AaBbCc 0123" sample text
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- TABLESTYLE/TS command: LIST, NEW subcommands for managing table styles
- Table Style Manager dialog: style list with details panel showing
name, margins, suppression flags, and row styles (data/header/title)
with text style, height, and alignment per row type
- New / Delete buttons in the dialog
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- MLSTYLE command: LIST, NEW, SET, DEL subcommands
- Multiline Style Manager dialog: style list, element details (offset,
color, linetype), Set Current / New / Delete buttons
- MLINE/ML command now reads document header.multiline_style to apply
the current style to newly created MLine entities
- MlineCommand.with_style() constructor for style-aware multiline drawing
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- src/io/plot_style.rs: PlotStyleTable and PlotStyleEntry data structures;
CTB reader (deflate/zlib decompressed text format) with ACI→RGB and
ACI→lineweight lookup; CTB writer (zlib compressed); LW_TABLE constant
- src/io/pdf_export.rs: accept optional PlotStyleTable; apply ACI color
and lineweight overrides during PDF rendering
- src/scene/wire_model.rs: add `aci: u8` field to carry ACI index
- src/scene/render.rs: render_style() now returns ACI alongside RGBA
- src/scene/mod.rs + tessellate.rs: propagate aci through wire building
- app: PlotStyleLoad/Loaded/Clear messages and handlers;
PLOTSTYLE LOAD | CLEAR | STATUS command; active_plot_style state on H7CAD
- flate2 added as dependency
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Add DimStyleDialogOpen/Close/Apply/Select/Tab/New/SetCurrent/Delete
messages and DsEdit/DsToggle with DsField enum for fine-grained edits
- Store active dialog state (selected style, current tab, edit buffers)
directly on H7CAD for all 28 most-used DimStyle properties
- dimstyle_overlay: 5-tab modal panel (Lines, Arrows, Text,
Scale/Units, Tolerances) with style list, Apply and Close buttons
- DIMSTYLE / DDIM with no sub-command now opens the dialog;
DIMSTYLE LIST / NEW / SET sub-commands remain available
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Screen-space UCS icon drawn on the existing selection canvas overlay.
Axes are projected from world space so the icon rotates with the camera,
always showing the correct X/Y/Z orientation relative to the drawing plane.
Each axis has its canonical color (X=red, Y=green, Z=blue) with arrowheads.
Icon visibility controlled by show_ucs_icon flag (default on); toggled by
UCSICON ON/OFF command which also updates paper-space viewport entities.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
PageSetup panel:
- Paper size presets (A4/A3/A2/A1/A0 portrait+landscape, Letter)
- Plot area selector: Layout vs Extents
- Center-on-page toggle
- Plot offset X/Y fields
- Rotation picker: 0° / 90° / 180° / 270°
PlotSettings (acadrust object):
- PageSetupCommit finds or creates a PlotSettings object in the document
- Writes paper size, plot type, centering, offset, rotation to it
- DXF round-trip: PlotSettings persisted to file
PDF export:
- Reads PlotSettings for the active layout
- Applies centering (auto-computes offset from wire extents)
- Applies offset X/Y from PlotSettings
- Applies rotation via PDF CTM transformation matrix
- Swaps paper dimensions for 90°/270° rotation
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
Four bugs prevented viewports from working like AutoCAD model-space windows:
1. Dead-code double-click block: `!is_down2` was always false because
`is_down2 = sel.left_down` is captured while the button is still held
(before the selection block clears it). Changed to `is_down` so the
double-click handler actually fires.
2. Inverted pan direction: pan_active_viewport used `-=` on the delta
returned by screen_delta_to_world, which is the same delta that cam.pan
*adds* to its target — causing reversed drag. Changed to `+=`.
3. Zoom not cursor-centered: zoom_active_viewport now accepts an optional
paper-space cursor position and adjusts view_target so the model point
under the cursor stays fixed (same as cam.zoom_about_point).
4. ESC did not exit MSPACE: CommandEscape now calls ExitViewport when
active_viewport is set and no command is running.
Also added MS/MSPACE and PSPACE command aliases, and MspaceCommand /
PspaceCommand messages so MS auto-enters the first viewport.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Add printpdf 0.9.1 dependency for native PDF generation.
- New src/io/pdf_export.rs: converts paper-space WireModels to a PDF
page (per-wire stroke color, line weight in Pt, NaN-split segments).
White/near-white colors are inverted to black for print output.
- Add PlotExport / PlotExportPath messages: opens a save-file dialog
and writes a .pdf next to the drawing file.
- Add PageSetupOpen/Close/WidthEdit/HeightEdit/Commit messages: a
centered modal panel lets the user enter paper width and height (mm);
on commit the Layout object's min/max_limits are updated in-place.
- Register PRINT / PLOT / EXPORT and PAGESETUP (PS) commands in
dispatch_command; fix MVIEW error message to English.
- Layout ribbon gains a "Plot" group with Page Setup and Export PDF
ribbon buttons.
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Add active_viewport: Option<Handle> field to Scene
- Add EnterViewport(Handle) and ExitViewport messages
- Double-click on a user viewport (id > 1) enters MSPACE;
double-click on empty area while in MSPACE exits to PSPACE
- MSPACE middle-drag pans the viewport's model-space view (view_target)
- MSPACE scroll zooms the viewport's view_height / custom_scale
- Drawing commands inside MSPACE receive model-space coordinates
via paper_to_model() coordinate transform
- Active viewport rendered with yellow dashed border (vs. cyan solid)
- Camera screen_delta_to_world helper for MSPACE pan conversion
- LayoutSwitch clears active_viewport
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
- Layout sekme sağ-tıklamasında context menüsü (Yeniden Adlandır / Sil)
- Inline rename: sekme metin-giriş alanına dönüşür, Enter ile commit, ✕ ile iptal
- LayoutDelete: layout ve sahip olduğu tüm entity'leri kaldırır
- LayoutRename: Layout nesnesinin adını yerinde günceller
- LayoutCreate çakışma koruması: mevcut isimler arasında benzersiz ad bulur
- Escape tuşu açık rename/context menüsünü kapatır
Co-Authored-By: Claude Sonnet 4.6 <[email protected]>
