The shaded surface of a curved solid was visibly coarser than its own
wireframe: the wire ran along the true rim while the facets cut inside it.
Two things were wrong, and only one was the tolerance.
`facet_res` is a resolution multiplier — the same one `scale_lod` divides the
fallback sampler's chord fraction by — and the kernel path was using it as a
sag in world units. At the default that asks for a whole unit of departure, so
nothing smaller than a metre subdivided at all and a face was only ever as
round as its own boundary. It is a fraction of each surface's own radius now,
which carries no assumption about the drawing's units.
And it is the *edges'* fraction, shared from `EDGE_CHORD_FRAC` rather than
copied. Those edges are drawn over these faces; sampling the two differently
is what put the wire across a facet instead of along its corners. `facet_res`
is deliberately not applied either, since the edges it must line up with are
built once at highest detail and never scaled.
A torus is measured by its tube rather than its ring — the tube is the tighter
bend, and sampling to the ring leaves the section a hexagon.
The primitive-volume test claimed a mesh can never read over its true size.
That holds for a convex solid, where every chord lies inside; a torus is not
one, and across the inside of its tube the chords fall outside the material.
It passed before only because the sampling was too coarse to show it.
Co-Authored-By: Claude Opus 5 <[email protected]>
The last four truck crates are gone from the manifest. What they were doing
falls into three parts, and each now has one answer instead of two.
NURBS evaluation. truck was carrying B-spline curves and surfaces for the
SPLINE entity, hatch boundaries, BLEND's endpoint frames, the spline preview
and ACIS spline-surface faces. The kernel now has both, over one de Boor
written across however many coordinates a control point holds — so a plane
curve and a space curve cannot drift apart, and a surface is the same
algorithm applied twice. The rational and the polynomial cases stop being
separate types: weights absent means polynomial.
The entity conversion. Every LINE, ARC, ELLIPSE, SPLINE and polyline was
built into truck topology purely so it could be sampled back into points.
They are sampled through `entities::curve` now, which is where each one's
geometry is already defined once and what EXTRUDE and REVOLVE read — so a
circle drawn on screen and a circle handed to the Model tab come from the
same definition. That retires four of TruckObject's variants and the module
is renamed for what it does.
SWEEP and LOFT. Both only ever produced a mesh, so both are built from point
lists: a band of quads per span, and a lid where a profile closes. Lofting
profiles of different densities resamples them by distance rather than by
index, so a circle lofted to a square no longer twists.
Two things worth noting for anyone reading the old comments. The tolerance
globals that lived in the tessellation module were never about truck at all —
they are the per-frame chord height, and they move to `curve_tol`. And the
rule that a profile handed over as `Lines` silently broke EXTRUDE and REVOLVE
no longer holds: those read the curve directly and never look at this channel.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <[email protected]>
Every 3-D solid OCS makes or opens now goes through cadkernel, which holds
analytic surfaces — a cylinder is a cylinder record, not a spline that looks
like one. That is what lets a solid built here be written back out as exact
ACIS instead of a triangulation, and a facetted export is a one-way door: the
next application to open the file would have no way back to the circle.
The Model tab's seven primitives, the Design-group booleans, 3DROTATE,
3DMIRROR, 3DALIGN, SLICE, SECTION, POLYSOLID and PYRAMID all come from the
kernel now, and `scene.solid_models` holds a `Body`. A mirrored solid needed
its own care before; the kernel reverses the loops on the way through, so it
comes back the right way out rather than lighting black.
EXTRUDE and REVOLVE sweep the profile `entities::curve` already defines, so a
circle, an arc-bulged polyline and a closed spline arrive as the same thing.
A circle extrudes into four cylinder patches rather than a run of chords, and
a profile turned about an axis becomes a cone, a sphere or a torus. A spline
profile has no analytic side wall and is refused rather than approximated.
ACIS goes both ways through the codec's own bridge: `lift` to read and
`append` to write. That drops the 679-line truck conversion and the planar-
only exporter, and the tessellator keeps its bespoke sampler as a fallback for
whatever the kernel cannot yet express — reported rather than passed off as
whole, since a mesh missing a wall looks finished.
truck-shapeops is no longer used and is gone from the manifest. truck-modeling
stays for now: fourteen files use it as a 3-D NURBS evaluator, which the
kernel has no answer for yet, and SWEEP and LOFT have no kernel operation
behind them either.
The two `automation` test failures are unchanged from before this and are not
caused by it.
Co-Authored-By: Claude Opus 5 <[email protected]>
The pattern's lines were clipped by sorting their crossings with the
boundary and taking every other span. That is right where a line cuts a
boundary cleanly and wrong wherever it grazes one: a line through a
corner crosses twice in effectively one place, and from there every span
is inverted — the fill lands in the holes and the solid comes out empty.
A 1e-5 dedup on the crossings hid some of it and could not fix the rest,
because which crossings to merge is not the question.
The kernel divides the line by its crossings and then asks each span
whether its middle is inside, which costs a containment test apiece and
cannot get out of step. It also accepts a curved boundary rather than
only a polygon, which this call site does not need yet and a section
fill will.
What stays is the PAT frame — the family angle, spacing, origin offset,
the k range and the dash walk — which is a format convention rather than
geometry.
Co-Authored-By: Claude Opus 5 <[email protected]>
Each entity built its own, and what they offered had drifted apart from
what the geometry actually has:
- An arc offered no quadrants at all. It now offers the ones its sweep
covers, and no more.
- A spline offered its control points as endpoints. For a control-point
spline those are not on the curve, so the cursor landed in empty space
beside the geometry. It now offers its two real ends and its midpoint,
with the fit points — which are on the curve — still on offer.
- An elliptical arc had no midpoint and no ends.
A new SnapHint::Endpoint carries an end that cannot go in key_vertices.
Consecutive entries there are taken to be joined by a straight segment
and their midpoint offered, which is right for a line or a polyline and
wrong for anything curved: an arc's two ends would also produce a snap
out on the chord. Splines lose their key_vertices for the same reason —
the chord between two fit points of a curvy spline does not run along
it.
A polyline's midpoints and arc-segment centres stay out of snap_pts
deliberately. The engine already derives a chain's midpoints from its
vertices, and a wire carrying a centre is treated as round elsewhere,
which a polyline with one bulge in it is not.
Co-Authored-By: Claude Opus 5 <[email protected]>
Route model, paper, viewport and nested block content through one traversal while preserving leaf renderers. Carry decoded material state into mesh shading and harden solid geometry conversion.
Keep Layout output on the selected physical sheet and preserve hatch lineweights and plot styles through paper, viewport, and nested block paths.\n\nRefs #607
Use the operating system trust store and Windows proxy settings while keeping TLS verification enabled. Add retryable registry errors with copyable diagnostics.\n\nRefs #563
- image_model.rs: drop unnecessary parentheses around a map's array
literal return.
- text_support.rs: remove dead row_in_column / col_rows computation and
its unused `li` binding (the only consumer).
Co-Authored-By: Claude Fable 5 <[email protected]>
PDF underlays only drew their clip outline / insertion cross; the page
itself never appeared. The chain now runs: the definition's file path
resolves with the raster-image fallbacks (as stored, relative to the
drawing, basename next to the drawing — attach-time relative paths go
stale), the page rasterises through the system pdftoppm (poppler) at
150 dpi — no new crate; missing tool degrades to the outline — cached
per (path, page) including negative results, and the pixels feed the
existing image pipeline as an ImageModel: 1 underlay unit = 1 PDF inch
(px/dpi × entity scale), rotated about the insertion, fade as opacity,
the clip polygon (non-inverted) as the textured region. Draw-order,
layer visibility and per-viewport freezes ride the generic image path;
in-place edits rebuild through the shared image seed.
When the page renders, the wire path draws its frame with an interior
pick surface instead of the lone cross, so selection covers the visible
page. wasm keeps the outline placeholder (no external process).
Co-Authored-By: Claude Fable 5 <[email protected]>
Hatch/wipeout boundary sub-loops were separated by NaN vertices that the
fill shaders detected with `p.x == p.x`. Intel Mesa folds that NaN
self-compare to `true` under fast math, so separators read as real
vertices, the ray-cast crossing count broke, and fills bled outside
their boundary — only on Intel iGPUs. GPU uploads now rewrite the
separators to a finite 1e30 sentinel (GPU_BOUNDARY_SEP) and the shaders
test `abs(x) < 1e29`, which every driver evaluates identically. The
CPU-side NaN representation is unchanged.
Co-Authored-By: Claude Fable 5 <[email protected]>
PEDIT reworked around a mode machine:
- Picking a line/arc asks "Object is not a polyline. Turn it into one?
[Yes/No] <Y>" — Yes converts in place (arc keeps its bulge) and
editing continues on the result. Pickfirst: an already-selected
polyline skips the select step, a selected line/arc goes straight to
the convert prompt.
- Join gathers with the normal selection system (single picks AND
window/crossing boxes) and merges through the JOIN machinery.
- Fit replaces every segment with a classic equal-parameter BIARC: two
arcs per segment meeting tangentially at an inserted knee, both
segments at a vertex sharing that vertex's tangent — the whole run is
tangent-continuous (verified: zero tangent jump on L/closed/zigzag/S
shapes). Spline resamples the vertex frame as a uniform cubic
B-spline (8 samples per span); Decurve straightens every bulge.
- Earlier hardening kept: undo snapshot before the mutation, immediate
repaint, polyline-only pick validation.
- Vertex editing lives on grips, so no Edit-vertex submode; instead the
vertex grip hover menu gains Break — a closed polyline opens at the
vertex, an open one splits into two (interior vertices only),
handled driver-side as an entity replacement.
JOIN itself: segs_of now emits one segment per span of an OPEN
polyline (bulges kept), so polylines merge with their neighbours —
PEDIT Join's set always contains the target polyline and used to abort
every time; plain JOIN had the same gap. JOIN also honours pickfirst:
launched with two or more objects selected it joins them immediately.
Closes#263
Co-Authored-By: Claude Fable 5 <[email protected]>
- Block reference Name (Misc) is editable: the dropdown re-points the
insert to another definition; typing a new name renames the definition
everywhere (record re-key, Block marker, every INSERT reference).
Anonymous (*) and xref blocks stay read-only, with the same guards
added to Scene::rename_block.
- Custom single-control dropdown (text field + caret) built on the
shared floating_below overlay so the list always opens downward,
unlike iced's space-based menu placement.
- Consecutive "<Base> X/Y/Z" rows (Position, Scale, Start, Center, ...)
collapse into one expandable summary row across all entities; the
expand state persists across rebuilds and selection changes.
- The BEDIT block tab no longer offers the layout Rename/Delete
context menu.
Co-Authored-By: Claude Fable 5 <[email protected]>
Xref merge now inserts entities in the source block's chain order and
carries SortEntitiesTable objects across (remapped to merged handles).
draw_depth_map values become [depth, half] so exploded block/xref fills
and wide-polyline band wires both compose child depth as
insert_depth + in-block rank x half, recursing into nested inserts with
the same divisor - bands and fills from one block interleave by the
block's internal order instead of stacking at the insert's single depth.
Band batches split per rank via WireModel.depth_override; thin wires
stay merged. The wire arena falls back to a full rebuild when a slab
carries mixed depths so refreshes don't flatten band overrides.
Co-Authored-By: Claude Fable 5 <[email protected]>
GRADIENT silently degraded to a plain hatch: add_hatch rebuilt the
render model from the DXF entity but never encoded the gradient on it,
so the committed fill lost its gradient entirely. The entity now
carries the full gradient record (name, angle, colour stops,
solid-fill flag), and the standard shape set became selectable:
Linear / Cylinder / Spherical / Hemispherical / Curved plus an Invert
toggle, offered as prompt buttons on the GRADIENT command and as a
Gradient type dropdown + Invert box in the properties panel. All nine
standard DXF names round-trip (inverted linear persists by swapping
the colour stops), and the shaders shape each kind distinctly —
mirrored cylinder, eased curve, dome-profiled hemisphere — on both the
native and web pipelines without changing the GPU struct sizes.
Co-Authored-By: Claude Fable 5 <[email protected]>
OLE2FRAME entities whose compound file carries a metafile presentation
(Excel/Word previews, scanned WMF pages) drew only their border frame —
the old decoder scanned the raw blob for a contiguous BMP, which the
CFB sector layout almost never provides. acadrust now extracts the
picture bytes tagged by kind; the new scene/model/gdi player rasterizes
EMF and WMF record streams on the CPU (pens/brushes, polygons, paths,
DIB blits, clipping, transforms) with text drawn through the existing
system-font glyph cache, and image_model feeds the result into the
raster pipeline. Rasters (BMP/PNG/JPEG/GIF, CF_DIB) decode as before
via the image crate.
Co-Authored-By: Claude Fable 5 <[email protected]>
A wide polyline with per-vertex varying widths rendered at its widest edge
(uniform-width ones were already exact). Draw the true taper instead.
`WireModel.taper_widths` carries a per-point full band width. The wire
instance (native slim + web fat) gains per-endpoint `world_hw_a/b`, and both
wire shaders interpolate `mix(hw_a, hw_b, which_end)` so each segment's band
narrows/widens linearly — depth-tested, and the linetype dash still applies.
Alignment (widths must match the tessellated points) is solved by building
both together: a new `TruckObject::TaperedLines(points, widths)`, filled by
`common::tapered_band_points` (straight = endpoints, arc = 16 samples with the
width lerped along it). to_truck routes a varying-width polyline here —
LwPolyline before the PLINEGEN split, Polyline2D at its return — while a
uniform-width one keeps the constant-band Contour path unchanged. `world_width`
stays the widest edge as the PDF-stroke + zoom-floor fallback.
Blocks fall back to the constant-widest band (`LocalWire` carries no
taper_widths).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A wide polyline's flat band was drawn by the hatch pipeline: a solid fill
with only draw-order depth. It ignored the entity linetype (the width
"crushed" the dash pattern) and showed through 3-D geometry in a tilted view.
Draw the band from the polyline's own centre-line wire instead. A new
`WireModel.world_width` (drawing units) makes the wire vertex shader expand
the quad by `world_half_width / world_per_pixel` (clamped to a hairline), so
the band is sized in world units and tracks zoom. Because it is now a wire:
- the GPU dash shader dashes the band by arc-length — the linetype applies;
- it is depth-tested at the polyline elevation — no draw-order see-through;
- no CPU band triangles or per-dash geometry are generated.
`world_half_width` rides in `WireConst` (native, replacing a pad) and the web
`WireInstance` (loc 14); both wire shaders branch on it. The tessellator sets
`world_width` from the LwPolyline width on the Contour / SegmentedLines arms,
and the model-space fill loop no longer emits a hatch band for any LwPolyline.
Pick still uses the band polygon (`pick_tris`).
Blocks keep the hatch band: `LocalWire` carries no `world_width` (finalize
zeroes it), so a scaled insert still scales its band correctly.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Rectangular paper viewports now go through the same GPU stencil clip as
non-rectangular ones: viewport_clip_boundary_ndc returns the four rect
corners (a full-target mask) instead of nothing, so the render path has
no rect/non-rect special case — every content viewport carries a clip
boundary and draws with stencil reference 0xFF.
With a single clip path, the old per-wire / -image / -wipeout scissor
mechanism is fully dead and removed: compute_*_scissors, the
*_pixel_scissors buffers, the project_scissor helper, the per-pass
set_scissor_rect blocks, the vp_scissor field threaded through
WireModel / ImageModel / HatchModel and their GPU mirrors (WireGpu /
ImageGpu / WipeoutGpu / HatchWebGpu), from_run's scissor parameter, the
scissor grouping in build_wire_buffers, and the is_arena_eligible gate.
Net -245 lines across 54 files.
Rectangular viewports still clip exactly via their own render rectangle;
the stencil mask is a redundant full-target no-op there, kept only so
the clip code path stays uniform. XCLIP keeps its CPU wire clip.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A gradient hatch was drawn linear from the entity colour to its second
stop, so a red->yellow spherical fill came out as a pale linear wash. Two
fixes:
- Colour: start from the gradient's first stop, not the entity colour.
hatch_model_from_dxf already baked stop-0 in; stop synced_hatch_models
from clobbering it with the entity's resolved colour for gradient fills.
- Shape: spherical / hemispherical / curved gradient names now render as a
radial fill (new shader mode 3, centred on the boundary with radius to the
farthest vertex) instead of linear. Native and web shaders both updated.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A raster image reference now resolves through one memoised path shared by
the loader and the unresolved-reference placeholder:
- http/https URLs are fetched natively (rustls, 8s timeout, 32MB cap); a
local file is read as before. The web build never fetches. The cache is
cleared when a new document opens.
- Online, the fetched image displays; offline or on a broken/missing
reference, the frame + saved path text still shows. One resolver keeps the
two in agreement without fetching twice.
The raster is also clipped to its boundary: the image draws as the
triangulated clip polygon (ear-clipped) with per-vertex UVs instead of a
full quad, so pixels appear only inside the clip. Clip-boundary Y is raster
space (top-down), so it is flipped to the image's Y-up space in both the
outline and the clip triangulation so they align.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A SOLID's filled quad and a dimension/MultiLeader text background are flat 2-D
overlays that should draw in wireframe and shaded alike, but face3d_gpu
classified fills by `!fill_tris_low.is_empty()` — and a 2-D fill at UTM scale
carries a double-single low residual for precision just like a real 3-D mesh
face. So the arrowhead fill and the "5;8" cyan text background were routed to
the 3-D buffer and only appeared in shaded mode, vanishing back to nothing on
return to wireframe.
WireModel now carries an explicit `fill_is_3d`: true only for a real surface
(PolyfaceMesh / PolygonMesh face, set in the tessellator), false for every flat
overlay fill. face3d_gpu classifies on the flag, so 2-D fills stay in the
always-visible buffer while keeping their low residual (and UTM precision).
Verified on budweiser: the `_BoxFilled` arrow SOLID and the dim '5;8' MTEXT
background both tessellate with fill_is_3d = false.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
An OLE2FRAME drew only a rectangle-with-X placeholder. AutoCAD shows the OLE
object's cached presentation image, which the DWG stores as a BMP embedded in
the OLE data blob (a BITMAPFILEHEADER "BM" + DIB).
`ImageModel::from_ole2frame` scans the blob for a self-consistent embedded BMP
(validating the DIB-header size, so a metafile/other-format OLE cleanly falls
back), decodes it with the `image` crate, and builds the textured quad at the
frame rectangle with a per-corner double-single split so it stays precise at UTM
scale. The scene's image collection now feeds OLE2FRAME entities through it
alongside RasterImage. The placeholder's diagonal X is dropped — only the frame
border is drawn now, so it no longer crosses over the bitmap.
Verified on budweiser handle 3088: the 32×32 embedded bitmap decodes to RGBA
with the expected colours (yellow upper-left, blue centre, red lower-right),
upright and positioned at the frame corners.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Extends the curved-face wireframe treatment from cones to spheres and tori, so
a solid built from those faces reads the way a cylinder already did.
ISOLINES: sphere faces get meridian lines across the face's colatitude span at
evenly spaced longitudes; torus faces get minor cross-section circles at evenly
spaced revolution angles. Both clip to the face's own parametric window (from
the boundary polygon via a shared `angular_span` gap-finder), so a partial
sphere or torus arc doesn't draw lines out over the missing part.
Silhouettes (DISPSILH): `CurvedGen` becomes an enum. A sphere silhouettes as
the great circle perpendicular to the view, clipped to the face window; a torus
as the two curves where the tube turns edge-on, traced around the revolution.
The silhouette now uses the camera's view *direction* alone, not the eye
position — a single parallel direction for the whole scene — so the outline
follows the view angle, holds still under pan, and doesn't foreshorten, which
is the orthographic silhouette a CAD wireframe expects.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
ISOLINES show a curved solid from any angle, but its outline still cut across
whichever fixed longitudinal lines happened to face the eye. DISPSILH draws the
true silhouette — the two lines where a cylinder (or cone) turns edge-on to the
view — and it moves with the camera, so it cannot be a baked edge.
Tessellation stores a world-space generator per cone/cylinder face on the mesh
set (axis, radial frame, radius, cone taper, extent), sharing the face-extent
extraction with the ISOLINES collector. Each frame `upload_silhouettes` walks
those generators, solves `du·cosθ + dv·sinθ = -tanα·da` for the two edge-on
angles (`φ ± acos(...)`, `φ ± π/2` for a cylinder), and builds a line list in
the mesh vertex format — double-single, so it stays precise at UTM. It draws
through the existing wireframe / edge pipelines in the wireframe and
shaded-with-edges passes.
Gated on the document's DISPSILH header flag, which defaults off — so the
per-frame pass is a no-op unless the drawing asks for it. Scoped to top-level
solids: a block instance's generators aren't transformed by the INSTANCE pose
yet, so they are cleared on the block path (its isolines and feature edges
still draw).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A wide polyline draws a solid band, but hit-testing only ever saw the
centreline 8 px out, so a donut could only be selected by clicking the
phantom circle inside the disc it paints. `self.hatches` — the map the
hatch pick channel walks — is filled from HATCH and SOLID alone, so the
band `wide_fills` produces was drawn (via `synced_hatch_models`) and never
picked.
The band rides in on `pick_tris`, the same channel a thickness wall uses:
`wide_fills` already computes it, so it costs one tessellation and inherits
the block transform. It ear clips rather than fans — an arc band is an
annular sector, concave on its inner edge — reusing `triangulate_planar`.
Wiring `pick_tris` through `Lines` alone was not enough: a plain wide
polyline leaves `to_truck` as `Contour`, and a PLINEGEN=0 one as
`SegmentedLines`. Both now carry it.
This needs the wire's cullable box to cover the band, and it did not.
`bounding_box()` boxes a polyline's stored vertices, knowing nothing of the
width painted around them: a donut's two vertices sit on one horizontal
line, so the box had zero height and rejected every click on the disc
before any triangle was tested. Every site that stamps the entity box onto
a wire now goes through `set_wire_aabb`, which widens it over `pick_tris`
(a no-op for the entities that have none, which is nearly all), and the
block cache chains `pick_tris` into its own box for the same reason.
That box was already too small for the centreline itself — an arc leaves
the vertex box — so a donut was unselectable at its top and bottom at
enough zoom. Widening fixes that too.
Verified end-to-end: tessellate a width-0.5 donut on a 0.05 centreline
radius, then `click_hit` five points 20 px clear of the centreline — all
land, and a click outside the disc still misses.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Selection tested a flat 8 px radius around each wire's centreline and
nothing else, so two things the user can see were not pickable.
A wire renders as a band `line_weight_px` wide, so pick now widens to that
rendered half-width via `pick_tolerance_px`, mirroring the wire shader's
`select(0.5, half_width, lwdisplay_enable)`. Behaviour is unchanged for
every standard weight (the widest, 2.11 mm, renders 7.97 px half-width —
just under the 8 px threshold); this keeps the two sides from drifting
apart if the display boost in `lineweight_to_px` ever changes.
Entities extruded by a DXF thickness draw their wall as four edges with
nothing in between, so the interior was a hole the cursor fell through.
WireModel gains `pick_tris`: triangles hit-testing treats as solid and the
renderer never uploads. Kept apart from `fill_tris` because that channel
reaches the GPU, and a wall that rendered shaded would change how every
thickness drawing looks. Ranked below `fill_tris` — those are drawn, these
are not, so where they overlap the drawn face is what the user means.
Walls are dropped when a wire is projected into a floating viewport:
`points` are reprojected and clipped into paper coords there, so cloned
model-space triangles would hit-test at a model-scale offset. Extruded
entities stay selectable by their edges, which do get projected.
The wall loop runs on every hover that misses everything else, so it
rejects on the wire's AABB first — an extruded circle is ~128 triangles
and a drawing full of thickness would otherwise project every wall on
each mouse move.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
MLINE dashed elements were fully CPU-expanded (apply_along) — one wire per
dash — to keep the parallel lines in phase. Move pure-dash elements onto the
GPU dash shader and end-align every element to the multiline's centre-line so
they share one interior phase.
- wire_distances now accumulates arc-length from the double-single (high+low)
points, so the dash phase stays precise at UTM coordinates. f32-high-only
deltas quantised ~0.1 there and drifted the parallel lines apart — the
original reason MLINE dashes were CPU-side.
- New WireModel.dash_align_end carries a shared begin/end dash length. The
shader uses it as align_end for every parallel element (the interior phase
depends on align_end, not the wire's own length) while align_total stays the
element's own length, so each still ends on a dash at its own endpoint.
- MLINE tessellation derives that length once from the centre-line, routes
pure dash/space/dot elements to the GPU pattern and text-bearing elements to
apply_along.
- apply_along gained an "A"-type mode (shared reference length): a solid
begin/end dash and a phased interior, so its dashes — and embedded text —
line up with the GPU-dashed sibling elements instead of tiling from start.
Pure-dash MLINEs now cost one WireModel + pattern per element instead of N
segments; single (non-MLINE) entities keep the from-start tiling unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
DET pipe walls now carry the stroke pattern (dash_from_start), which
tiles from each wall's own start vertex and skips the A-type end
alignment that was force-lighting a solid dash under the end symbol.
Two rendering fixes on top:
- Dedup the host polyline's vertices before offsetting the walls. Some
DGN pipe polylines carry trailing duplicate end vertices; a zero-length
segment gave offset_xy a degenerate normal, leaving that vertex
un-offset and folding the wall down to the centre line. The two walls'
fold segments met at the centre and drew a spurious line linking them.
- Re-key the symbol (end circle / half-ellipse) wires to the host handle
so the whole pipe picks and selects as one entity instead of the
symbols acting as separate phantom entities.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
A UTM drawing plotted deformed — both geometry and text — while the same
drawing near the origin came out clean. Every pass of the exporter narrowed
an absolute world coordinate to f32 before the offset had a chance to cancel
it, and f32 resolution at UTM is ~0.03 m on easting and ~0.5 m on northing,
so the whole plot snapped onto that grid.
Four places did it, all now folding in f64 and narrowing only once the
result is a single-digit sheet-mm value:
- The wire pass never read `points_low` at all — the word did not appear in
the file — so it plotted the double-single "high" half alone and dropped
every residual.
- emit_hatch cast the f64 `world_origin` to f32, re-introducing at the last
step exactly the quantisation the boundary-relative encoding exists to
avoid.
- pattern_segments rasterised entirely in absolute f32. The pattern is
anchored at world (0,0), so a hatch at UTM runs a line index k of ~1e7:
`origin + k · step` and the `edge − line` intersections both fall apart
there. k also becomes i64 — `as i32` saturates silently, which would
collapse the range to a bogus run from i32::MIN rather than drop the fill.
- emit_text folded `pos + pos_low` in f32, which rounds straight back to
`pos`: the residual the pair exists to carry was discarded at precisely
the coordinates it was carried for.
The offsets themselves were also narrowed by the callers, so the value meant
to cancel a UTM coordinate was quantised before it could. Widen ox/oy to f64
through export_pdf, build_pdf, print_wires and the two plot-param builders;
printing shared the same path and the same bug.
Pre-existing, not from #390 — that change only routed text through the same
faulty pipe the wires were already in.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Review follow-ups to #390, which fixed PDF/print text for model space but
left the layout-plot path — the one issue #385 was filed from — broken.
viewport_content_wires rewrote points/snap_pts/key_vertices/aabb and then
cloned text_verts through untouched, so paper-space viewport text stayed at
model (UTM) coordinates: a dimension at model (25000, 12000) plotted its
lines onto the sheet and its glyphs kilometres off the page. A text-only
wire fared worse — TEXT/MTEXT carry no stroke points since text went
SDF-only, so it was dropped outright by the empty-clip and AABB rejections.
Project the glyphs through the same proj_abs the snap points use (via the
existing map_text_verts helper), cull per glyph on the quad centroid, count
them towards the paper AABB, and dim them like the wire colour.
Also in emit_text, which diverged from the wire pass it mirrors:
- divide the pen by `scale`, or a Fit/windowed plot prints text as
near-invisible hairlines while its own lines stay correct;
- apply the CTB plot style, or a monochrome.ctb plot renders the lines
black and leaves the text on its screen colour;
- reset the dash pattern, which is persistent PDF state the wire pass
leaves set — a HIDDEN-linetype last wire printed glyph outlines dashed.
export_table's doc claimed it honoured TEXTFILL and widened the bold pen
itself; it did neither. Gate fill_tris on textfill() so hollow-on-screen
text exports hollow, carry the bold flag and widen the pen by the 1.7x the
bake uses, and resolve Face once per family instead of once per glyph (the
atlas mutex is held for that whole walk).
uv_key identifies a glyph by its tile's uv_min, but grow_height rescales
every entry's V and reset rewinds the packer, leaving already-built quads
addressing the wrong tile — garbage on screen and a silent miss in the
export table, i.e. #385 again under #347's grow-the-atlas conditions. Bump
an atlas generation on both and fold it into the tessellation memo guard so
the text re-lays-out instead. Quads built earlier in the same pass that
grows are still stale for that pass; the guard heals them on the next one.
Tests: the integration test's "some wire has text_verts" assert passed on
pre-fix code too (the exporter ignored them; the scene always carried
them), and its dimension half was satisfied by the TEXT alone — assert per
entity handle instead, and stop colliding on fixed names in the shared temp
root. The unit test's bbox came from the same quads the mapping reads, so
it held by construction; pin the run's own world box instead. That still
cannot catch a mirrored corner assignment — verified by mirroring it — so
say so rather than claim coverage the assert doesn't have.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The HATCH/GRADIENT/BOUNDARY commands built the persisted hatch through
the render-side boundary (f32 offsets from world_origin), and with a
zero world_origin that meant absolute f32 - so a typed boundary vertex
of 2000.8 was stored as 2000.8020, and at UTM scale the fill landed far
from its boundary.
HatchModel.boundary stays f32 (the GPU render contract). Added
HatchModel.boundary_wcs: Option<Arc<Vec<[f64;2]>>>, an exact absolute-WCS
boundary set only by the draw commands. Scene::add_hatch persists from
boundary_wcs when present (exact f64 -> DxfHatch), else falls back to the
f32 + world_origin reconstruction used by DXF-rebuilt hatches. manual_pts
is now Vec<DVec3>; make_hatch takes the f64 boundary, stores the exact
copy and derives the RTE render rep. The committed render model is
rebuilt from the DXF entity, so nothing renders the command model's f32
boundary. This also fixes command hatches mis-placing at large
coordinates (world_origin was [0,0]).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Command previews (MOVE, COPY, ROTATE, SCALE, STRETCH, MIRROR, ARRAY,
PASTE, INSERT) build ghost WireModels via WireModel::translated/rotated/
scaled/stretched/mirrored, but those helpers moved only `points`, never
`text_verts`, and the ghosts' glyphs were never uploaded — so text
vanished (or froze at its source) during the preview, same root cause as
the grip-drag case.
Transform text_verts alongside points in all five helpers (shared
map_text_verts, reconstructing + re-splitting the double-single world
position), and gather preview_wires' glyphs into the per-frame
preview-text buffer in the render path. This covers every command
preview automatically. The grip-drag else branch no longer sets
preview_text explicitly (the render gather handles it); the grip-slide
fast path keeps its own scene.preview_text channel (empty preview_wires,
so no double-draw).
MIRROR honours MIRRTEXT: on -> true glyph mirror via mirrored(); off ->
readable relocation via translated().
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Merge duplicate Type into pattern_type; Type/Associative/Island detection as dropdown/toggle; Angle/Scale/Spacing/Origin X-Y editable; Color via picker. Reorder Pattern group, drop redundant Color/Transparency/Layer override and the Misc section. Wire the pattern origin (per-line base_point) into the render (x0/y0 relative to world_origin) so it affects dashed/offset patterns; add a circle origin grip at the hatch centroid (new GripShape::Circle).
Co-Authored-By: Claude Opus 4.8 <[email protected]>
The Current Vertex row is now a ◀ / ▶ stepper (new PropValue::Stepper)
showing "i / N". Stepping it moves the panel's focus through the
polyline's vertices — Vertex X/Y and the per-vertex start/end widths show
and edit the focused vertex instead of always the first — and the focused
vertex's grip is drawn hot (filled) in the drawing so it's visible while
navigating. Focus wraps around and resets to the first vertex when the
selection changes. Adds Area and Length to the LwPolyline Geometry group
(Polyline2D already had them). Applies to LwPolyline and Polyline2D.
The focused vertex is threaded to the per-entity property builder/editor
through a dispatch thread-local (like the curve-tolerance override), so
the PropertyEditable trait signatures are unchanged.
Co-Authored-By: Claude Opus 4.8 <[email protected]>
Hakan Seven