use super::*;

impl OpenCADStudio {
    pub(super) fn dispatch_dim(&mut self, cmd: &str, i: usize) -> Option<Task<Message>> {
        match cmd {
            "DIMALIGNED" => {
                use crate::modules::annotate::aligned_dim::AlignedDimensionCommand;
                let cmd = AlignedDimensionCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMDIAMETER" => {
                use crate::modules::annotate::diameter_dim::DiameterDimensionCommand;
                let cmd = DiameterDimensionCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMLINEAR" => {
                use crate::modules::annotate::linear_dim::LinearDimensionCommand;
                let new_cmd = LinearDimensionCommand::new();
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "DIMRADIUS" => {
                use crate::modules::annotate::radius_dim::RadiusDimensionCommand;
                let new_cmd = RadiusDimensionCommand::new();
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "DIMANGULAR" => {
                use crate::modules::annotate::angular_dim::AngularDimensionCommand;
                let new_cmd = AngularDimensionCommand::new();
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "DIMORDINATE" => {
                use crate::modules::annotate::ordinate_dim::OrdinateDimCommand;
                let new_cmd = OrdinateDimCommand::new();
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            // LEADER draws a leader line with an annotation; QLEADER is the same
            // quick leader-plus-annotation operation.
            "LEADER" | "QLEADER" => {
                use crate::modules::annotate::leader_cmd::LeaderCommand;
                let new_cmd = LeaderCommand::new();
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            // JUSTIFYTEXT <option> — change the justification of selected text and
            // multiline-text objects.
            "JUSTIFYTEXT" => {
                use crate::command::SelectThenKeywordCommand;
                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
                let c = SelectThenKeywordCommand::new(
                    "JUSTIFYTEXT",
                    "JUSTIFYTEXT  [Left / Center / Right / Middle / Aligned / Fit]:",
                    vec![
                        ("Left", "LEFT", None),
                        ("Center", "CENTER", None),
                        ("Right", "RIGHT", None),
                        ("Middle", "MIDDLE", None),
                        ("Aligned", "ALIGN", None),
                        ("Fit", "FIT", None),
                    ],
                    has_sel,
                );
                self.command_line.push_info(&c.prompt());
                self.tabs[i].active_cmd = Some(Box::new(c));
            }
            cmd if cmd.starts_with("JUSTIFYTEXT ") => {
                let opt = cmd.split_whitespace().nth(1).unwrap_or("").to_uppercase();
                let handles: Vec<acadrust::Handle> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .iter()
                    .map(|(h, _)| *h)
                    .collect();
                if handles.is_empty() {
                    self.command_line
                        .push_error("JUSTIFYTEXT: select text objects first.");
                    return Some(Task::none());
                }
                if opt.is_empty() {
                    self.command_line.push_info(
                        "Usage: JUSTIFYTEXT <Left|Center|Right|Middle|TL|TC|TR|ML|MC|MR|BL|BC|BR>",
                    );
                    return Some(Task::none());
                }
                use acadrust::entities::{
                    AttachmentPoint as AP, TextHorizontalAlignment as TH,
                    TextVerticalAlignment as TV,
                };
                let text_align = match opt.as_str() {
                    "L" | "LEFT" | "TL" | "ML" | "BL" => Some(TH::Left),
                    "C" | "CENTER" | "TC" | "BC" => Some(TH::Center),
                    "R" | "RIGHT" | "TR" | "MR" | "BR" => Some(TH::Right),
                    "M" | "MIDDLE" | "MC" => Some(TH::Middle),
                    "A" | "ALIGN" | "ALIGNED" => Some(TH::Aligned),
                    "F" | "FIT" => Some(TH::Fit),
                    _ => None,
                };
                // Vertical band for single-line TEXT. Bare L/C/R (and Aligned/Fit
                // and the special Middle) keep the baseline; the T*/M*/B* codes
                // pin the top/middle/bottom of the text box.
                let text_valign = match opt.as_str() {
                    "TL" | "TC" | "TR" => Some(TV::Top),
                    "ML" | "MC" | "MR" => Some(TV::Middle),
                    "BL" | "BC" | "BR" => Some(TV::Bottom),
                    _ => None,
                };
                let mtext_ap = match opt.as_str() {
                    "TL" => Some(AP::TopLeft),
                    "TC" => Some(AP::TopCenter),
                    "TR" => Some(AP::TopRight),
                    "ML" | "L" | "LEFT" => Some(AP::MiddleLeft),
                    "MC" | "M" | "MIDDLE" | "C" | "CENTER" => Some(AP::MiddleCenter),
                    "MR" | "R" | "RIGHT" => Some(AP::MiddleRight),
                    "BL" => Some(AP::BottomLeft),
                    "BC" => Some(AP::BottomCenter),
                    "BR" => Some(AP::BottomRight),
                    _ => None,
                };
                if text_align.is_none() && mtext_ap.is_none() {
                    self.command_line
                        .push_error("JUSTIFYTEXT: unknown justification option.");
                    return Some(Task::none());
                }
                self.push_undo_snapshot(i, "JUSTIFYTEXT");
                let mut n = 0usize;
                for h in &handles {
                    if let Some(e) = self.tabs[i]
                        .scene
                        .document
                        .entities_mut()
                        .find(|e| e.common().handle == *h)
                    {
                        match e {
                            acadrust::EntityType::Text(t) => {
                                let mut changed = false;
                                if let Some(a) = text_align {
                                    t.horizontal_alignment = a;
                                    changed = true;
                                }
                                if let Some(v) = text_valign {
                                    t.vertical_alignment = v;
                                    changed = true;
                                }
                                if changed {
                                    crate::entities::text::sync_text_alignment_point(t);
                                    n += 1;
                                }
                            }
                            acadrust::EntityType::MText(m) => {
                                if let Some(a) = mtext_ap {
                                    m.attachment_point = a;
                                    n += 1;
                                }
                            }
                            _ => {}
                        }
                    }
                }
                self.tabs[i].dirty = true;
                self.tabs[i].scene.bump_geometry();
                self.command_line
                    .push_output(&format!("JUSTIFYTEXT: updated {n} text object(s)."));
            }

            // TCASE <Upper|Lower|Sentence|Title> — change the case of the text in
            // selected text and multiline-text objects.
            "TCASE" => {
                use crate::command::SelectThenKeywordCommand;
                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
                let c = SelectThenKeywordCommand::new(
                    "TCASE",
                    "TCASE  [Upper / Lower / Sentence / Title]:",
                    vec![
                        ("Upper", "UPPER", None),
                        ("Lower", "LOWER", None),
                        ("Sentence", "SENTENCE", None),
                        ("Title", "TITLE", None),
                    ],
                    has_sel,
                );
                self.command_line.push_info(&c.prompt());
                self.tabs[i].active_cmd = Some(Box::new(c));
            }
            cmd if cmd.starts_with("TCASE ") => {
                let opt = cmd.split_whitespace().nth(1).unwrap_or("").to_uppercase();
                let handles: Vec<acadrust::Handle> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .iter()
                    .map(|(h, _)| *h)
                    .collect();
                if handles.is_empty() {
                    self.command_line
                        .push_error("TCASE: select text objects first.");
                    return Some(Task::none());
                }
                if !matches!(
                    opt.as_str(),
                    "U" | "UPPER"
                        | "UPPERCASE"
                        | "L"
                        | "LOWER"
                        | "LOWERCASE"
                        | "S"
                        | "SENTENCE"
                        | "T"
                        | "TITLE"
                ) {
                    self.command_line
                        .push_info("Usage: TCASE <Upper|Lower|Sentence|Title>");
                    return Some(Task::none());
                }
                let conv = move |s: &str| -> String {
                    match opt.as_str() {
                        "U" | "UPPER" | "UPPERCASE" => s.to_uppercase(),
                        "L" | "LOWER" | "LOWERCASE" => s.to_lowercase(),
                        "S" | "SENTENCE" => sentence_case(s),
                        _ => title_case(s),
                    }
                };
                self.push_undo_snapshot(i, "TCASE");
                let mut n = 0usize;
                for h in &handles {
                    if let Some(e) = self.tabs[i]
                        .scene
                        .document
                        .entities_mut()
                        .find(|e| e.common().handle == *h)
                    {
                        match e {
                            acadrust::EntityType::Text(t) => {
                                t.value = conv(&t.value);
                                n += 1;
                            }
                            acadrust::EntityType::MText(m) => {
                                m.value = conv(&m.value);
                                n += 1;
                            }
                            _ => {}
                        }
                    }
                }
                self.tabs[i].dirty = true;
                self.tabs[i].scene.bump_geometry();
                self.command_line
                    .push_output(&format!("TCASE: updated {n} text object(s)."));
            }

            // TEXTMASK — place a wipeout mask sized to each selected text object's
            // extent and bring the text in front, so the mask hides whatever is
            // underneath while the text stays readable. (Same world-XY coordinate
            // space the WIPEOUT command uses.)
            "TEXTMASK" => {
                use crate::command::SelectThenValueCommand;
                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
                let c = SelectThenValueCommand::new(
                    "TEXTMASK",
                    "TEXTMASK  press Enter to mask the selected text:",
                    has_sel,
                );
                self.command_line.push_info(&c.prompt());
                self.tabs[i].active_cmd = Some(Box::new(c));
            }
            cmd if cmd.starts_with("TEXTMASK ") => {
                let handles: Vec<acadrust::Handle> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .iter()
                    .filter(|(_, e)| {
                        matches!(
                            e,
                            acadrust::EntityType::Text(_) | acadrust::EntityType::MText(_)
                        )
                    })
                    .map(|(h, _)| *h)
                    .collect();
                if handles.is_empty() {
                    self.command_line
                        .push_error("TEXTMASK: select text objects first.");
                    return Some(Task::none());
                }
                self.push_undo_snapshot(i, "TEXTMASK");
                let mut n = 0usize;
                for h in &handles {
                    let wires = self.tabs[i].scene.wire_models_for(&[*h]);
                    let (mut min, mut max) = ([f32::MAX; 3], [f32::MIN; 3]);
                    for w in &wires {
                        for p in &w.points {
                            for k in 0..3 {
                                min[k] = min[k].min(p[k]);
                                max[k] = max[k].max(p[k]);
                            }
                        }
                    }
                    if min[0] > max[0] {
                        continue; // no geometry for this object
                    }
                    let pad = ((max[1] - min[1]) * 0.15).max(0.0);
                    let c1 = acadrust::types::Vector3::new(
                        (min[0] - pad) as f64,
                        (min[1] - pad) as f64,
                        min[2] as f64,
                    );
                    let c2 = acadrust::types::Vector3::new(
                        (max[0] + pad) as f64,
                        (max[1] + pad) as f64,
                        min[2] as f64,
                    );
                    self.tabs[i]
                        .scene
                        .add_entity_clone(acadrust::EntityType::Wipeout(
                            acadrust::entities::Wipeout::from_corners(c1, c2),
                        ));
                    n += 1;
                }
                // Draw the text in front of its newly-added masks.
                self.tabs[i].scene.selected = handles.iter().cloned().collect();
                self.tabs[i].dirty = true;
                self.command_line
                    .push_output(&format!("TEXTMASK: masked {n} text object(s)."));
                return self.dispatch_view("DRAWORDER FRONT", i);
            }

            // (text width fit)
            // TEXTFIT <width> — adjust the width factor of selected single-line
            // text so its rendered width matches the target.
            "TEXTFIT" => {
                use crate::command::SelectThenValueCommand;
                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
                let c =
                    SelectThenValueCommand::new("TEXTFIT", "TEXTFIT  target width:", has_sel);
                self.command_line.push_info(&c.prompt());
                self.tabs[i].active_cmd = Some(Box::new(c));
            }
            cmd if cmd.starts_with("TEXTFIT ") => {
                let target: f64 = match cmd.split_whitespace().nth(1).and_then(|s| s.parse().ok()) {
                    Some(v) if v > 0.0 => v,
                    _ => {
                        self.command_line.push_info(
                            "Usage: TEXTFIT <target width>   (fits selected text to that width)",
                        );
                        return Some(Task::none());
                    }
                };
                let handles: Vec<acadrust::Handle> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .iter()
                    .filter(|(_, e)| matches!(e, acadrust::EntityType::Text(_)))
                    .map(|(h, _)| *h)
                    .collect();
                if handles.is_empty() {
                    self.command_line
                        .push_error("TEXTFIT: select single-line text first.");
                    return Some(Task::none());
                }
                self.push_undo_snapshot(i, "TEXTFIT");
                let mut n = 0usize;
                for h in &handles {
                    let wires = self.tabs[i].scene.wire_models_for(&[*h]);
                    let (mut minx, mut maxx) = (f32::MAX, f32::MIN);
                    for w in &wires {
                        for p in &w.points {
                            minx = minx.min(p[0]);
                            maxx = maxx.max(p[0]);
                        }
                    }
                    let cur_w = (maxx - minx) as f64;
                    if cur_w <= 1e-9 {
                        continue;
                    }
                    if let Some(acadrust::EntityType::Text(t)) = self.tabs[i]
                        .scene
                        .document
                        .entities_mut()
                        .find(|e| e.common().handle == *h)
                    {
                        let old = if t.width_factor.abs() > 1e-9 {
                            t.width_factor
                        } else {
                            1.0
                        };
                        t.width_factor = old * target / cur_w;
                        n += 1;
                    }
                }
                self.tabs[i].dirty = true;
                self.tabs[i].scene.bump_geometry();
                self.command_line.push_output(&format!(
                    "TEXTFIT: fitted {n} text object(s) to width {target}."
                ));
            }

            // (text sequential numbering)
            // TCOUNT [start] — prefix selected single-line text with sequential
            // numbers in reading order (top-to-bottom, then left-to-right).
            "TCOUNT" => {
                use crate::command::SelectThenValueCommand;
                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
                let c = SelectThenValueCommand::new(
                    "TCOUNT",
                    "TCOUNT  starting number (Enter for 1):",
                    has_sel,
                );
                self.command_line.push_info(&c.prompt());
                self.tabs[i].active_cmd = Some(Box::new(c));
            }
            cmd if cmd.starts_with("TCOUNT ") => {
                let start: i64 = cmd
                    .split_whitespace()
                    .nth(1)
                    .and_then(|s| s.parse().ok())
                    .unwrap_or(1);
                let mut texts: Vec<(acadrust::Handle, f64, f64)> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .iter()
                    .filter_map(|(h, e)| match e {
                        acadrust::EntityType::Text(t) => {
                            Some((*h, t.insertion_point.x, t.insertion_point.y))
                        }
                        _ => None,
                    })
                    .collect();
                if texts.is_empty() {
                    self.command_line
                        .push_error("TCOUNT: select single-line text first.");
                    return Some(Task::none());
                }
                // Reading order: higher Y first, then smaller X.
                texts.sort_by(|a, b| {
                    b.2.partial_cmp(&a.2)
                        .unwrap_or(std::cmp::Ordering::Equal)
                        .then(a.1.partial_cmp(&b.1).unwrap_or(std::cmp::Ordering::Equal))
                });
                self.push_undo_snapshot(i, "TCOUNT");
                let mut num = start;
                for (h, _, _) in &texts {
                    if let Some(acadrust::EntityType::Text(t)) = self.tabs[i]
                        .scene
                        .document
                        .entities_mut()
                        .find(|e| e.common().handle == *h)
                    {
                        t.value = format!("{num} {}", t.value);
                        num += 1;
                    }
                }
                self.tabs[i].dirty = true;
                self.tabs[i].scene.bump_geometry();
                self.command_line.push_output(&format!(
                    "TCOUNT: numbered {} text object(s) from {start}.",
                    texts.len()
                ));
            }

            "MLEADER" => {
                use crate::modules::annotate::mleader_cmd::MLeaderCommand;
                let new_cmd = MLeaderCommand::new();
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "TOLERANCE" => {
                use crate::modules::annotate::tolerance_cmd::ToleranceCommand;
                let cmd = ToleranceCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "TABLE" => {
                use crate::modules::annotate::table_cmd::TableCommand;
                let cmd = TableCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMCONTINUE" => {
                use crate::modules::annotate::dim_continue::DimContinueCommand;
                let cmd = if let Some((p1, p2, dp, rot, trot)) =
                    find_last_linear_dim(&self.tabs[i].scene)
                {
                    DimContinueCommand::from_base(p1, p2, dp, rot, trot)
                } else {
                    DimContinueCommand::new()
                };
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMBASELINE" => {
                use crate::modules::annotate::dim_baseline::DimBaselineCommand;
                let cmd = if let Some((p1, p2, dp, rot, trot)) =
                    find_last_linear_dim(&self.tabs[i].scene)
                {
                    let doc = &self.tabs[i].scene.document;
                    let dimdli = doc
                        .dim_styles
                        .iter()
                        .find(|s| {
                            s.name
                                .eq_ignore_ascii_case(&doc.header.current_dimstyle_name)
                        })
                        .map(|s| s.dimdli as f32)
                        .unwrap_or(1.5);
                    DimBaselineCommand::from_base(p1, p2, dp, rot, trot, dimdli)
                } else {
                    DimBaselineCommand::new()
                };
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "QDIM" => {
                use crate::modules::annotate::qdim::QdimCommand;
                let cmd = QdimCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            // QDIM second stage: the front-end relaunched with the picked
            // dimension-line point and the gathered geometry now selected. Build
            // a continuous chain of linear dimensions across the endpoints.
            cmd if cmd.starts_with("QDIM_PLACE ") => {
                let nums: Vec<f64> = cmd
                    .split_whitespace()
                    .skip(1)
                    .filter_map(|s| s.parse().ok())
                    .collect();
                if nums.len() < 3 {
                    return Some(Task::none());
                }
                let place = glam::DVec3::new(nums[0], nums[1], nums[2]);
                let handles: Vec<acadrust::Handle> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .iter()
                    .map(|(h, _)| *h)
                    .collect();
                let mut pts: Vec<glam::DVec3> = Vec::new();
                for h in &handles {
                    if let Some(e) = self.tabs[i].scene.document.get_entity(*h) {
                        qdim_collect_points(e, &mut pts);
                    }
                }
                if pts.len() < 2 {
                    self.command_line
                        .push_error("QDIM: no dimensionable endpoints in the selection.");
                    return Some(Task::none());
                }
                // Choose the dimension axis from the points' spread: a wider X
                // span dimensions horizontally (ordered by X), else vertically.
                let (minx, maxx) = pts
                    .iter()
                    .fold((f64::MAX, f64::MIN), |(a, b), p| (a.min(p.x), b.max(p.x)));
                let (miny, maxy) = pts
                    .iter()
                    .fold((f64::MAX, f64::MIN), |(a, b), p| (a.min(p.y), b.max(p.y)));
                let horizontal = (maxx - minx) >= (maxy - miny);
                if horizontal {
                    pts.sort_by(|a, b| a.x.total_cmp(&b.x));
                    pts.dedup_by(|a, b| (a.x - b.x).abs() < 1e-4);
                } else {
                    pts.sort_by(|a, b| a.y.total_cmp(&b.y));
                    pts.dedup_by(|a, b| (a.y - b.y).abs() < 1e-4);
                }
                if pts.len() < 2 {
                    self.command_line
                        .push_error("QDIM: endpoints collapse to a single position.");
                    return Some(Task::none());
                }
                self.push_undo_snapshot(i, "QDIM");
                let v = |p: glam::DVec3| {
                    acadrust::types::Vector3::new(p.x, p.y, p.z)
                };
                let mut made = 0usize;
                for w in pts.windows(2) {
                    let (p1, p2) = (w[0], w[1]);
                    let mut dim = acadrust::entities::DimensionLinear::new(v(p1), v(p2));
                    dim.rotation = if horizontal {
                        0.0
                    } else {
                        std::f64::consts::FRAC_PI_2
                    };
                    // Dim line passes through the picked perpendicular position.
                    let def = if horizontal {
                        glam::DVec3::new((p1.x + p2.x) * 0.5, place.y, 0.0)
                    } else {
                        glam::DVec3::new(place.x, (p1.y + p2.y) * 0.5, 0.0)
                    };
                    dim.definition_point = v(def);
                    dim.base.definition_point = v(def);
                    dim.base.actual_measurement = dim.measurement();
                    self.commit_entity(acadrust::EntityType::Dimension(
                        acadrust::entities::Dimension::Linear(dim),
                    ));
                    made += 1;
                }
                self.tabs[i].dirty = true;
                self.command_line
                    .push_output(&format!("QDIM  {made} dimensions created."));
                return Some(Task::none());
            }

            "DIMEDIT" => {
                use crate::modules::annotate::dimedit::DimEditCommand;
                let cmd = DimEditCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMTEDIT" | "DIMTED" => {
                use crate::modules::annotate::dimtedit::DimTeditCommand;
                let cmd = DimTeditCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMBREAK" => {
                use crate::modules::annotate::dimbreak::DimBreakCommand;
                let cmd = DimBreakCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMSPACE" | "DSPACE" => {
                use crate::modules::annotate::dimspace::DimSpaceCommand;
                let cmd = DimSpaceCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "DIMJOGLINE" => {
                use crate::modules::annotate::dimjogline::DimJogLineCommand;
                let cmd = DimJogLineCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "MLEADERADD" => {
                use crate::modules::annotate::mleader_edit::MLeaderAddCommand;
                let cmd = MLeaderAddCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "MLEADERREMOVE" => {
                use crate::modules::annotate::mleader_edit::MLeaderRemoveCommand;
                let cmd = MLeaderRemoveCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "MLEADERALIGN" => {
                use crate::modules::annotate::mleader_edit::MLeaderAlignCommand;
                let cmd = MLeaderAlignCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "MLEADERCOLLECT" => {
                use crate::modules::annotate::mleader_edit::MLeaderCollectCommand;
                let cmd = MLeaderCollectCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "ZOOM EXTENTS" | "ZOOMEXTENTS" | "ZE" => {
                self.tabs[i].scene.fit_all();
                self.command_line.push_output("Zoom Extents");
            }

            "ZOOM IN" | "ZI" => {
                self.tabs[i].scene.zoom_camera(1.0 / 1.5);
                self.command_line.push_output("Zoom In");
            }

            "ZOOM OUT" | "ZO" => {
                self.tabs[i].scene.zoom_camera(1.5);
                self.command_line.push_output("Zoom Out");
            }

            // ZOOM ALL — fit all entities (same as EXTENTS for now)
            "ZOOM ALL" | "ZOOM A" | "ZA" => {
                self.tabs[i].scene.fit_all();
                self.command_line.push_output("Zoom All");
            }

            // ZOOM SCALE — set zoom factor (e.g. "ZOOM SCALE 2" or "ZS 0.5")
            cmd if cmd.starts_with("ZOOM SCALE ") || cmd.starts_with("ZS ") => {
                let rest = cmd
                    .split_once(' ')
                    .and_then(|(_, r)| r.split_once(' ').map(|(_, v)| v).or(Some(r)))
                    .unwrap_or("1");
                if let Ok(factor) = rest.trim().parse::<f32>() {
                    if factor > 0.0 {
                        self.tabs[i].scene.zoom_camera(1.0 / factor);
                        self.command_line
                            .push_output(&format!("Zoom Scale ×{factor:.3}"));
                    }
                }
            }

            "PLOTWINDOW" => {
                use crate::modules::view::plot_window::PlotWindowCommand;
                let cmd = PlotWindowCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            "QUICKPRINT" => {
                use crate::modules::view::quick_print::QuickPrintCommand;
                let cmd = QuickPrintCommand::new();
                self.command_line.push_info(&cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(cmd));
            }

            // Bare ZOOM enters the interactive window zoom (pick two corners) —
            // the common "zoom to a rectangle" action. The sub-keyword forms
            // (ZOOM EXTENTS / IN / OUT / …) are matched above.
            "ZOOM WINDOW" | "ZOOM W" | "ZW" | "ZOOM" => {
                use crate::modules::view::zoom_window::ZoomWindowCommand;
                let new_cmd = ZoomWindowCommand::new();
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "STRETCH" => {
                let handles: Vec<_> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .into_iter()
                    .map(|(h, _)| h)
                    .collect();
                if handles.is_empty() {
                    use crate::modules::draw::select::SelectObjectsCommand;
                    let cmd = SelectObjectsCommand::new("STRETCH");
                    self.command_line.push_info(&cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(cmd));
                } else {
                    use crate::modules::draw::modify::stretch::StretchCommand;
                    let wires = self.tabs[i].scene.wire_models_for(&handles);
                    let new_cmd = StretchCommand::new(handles, wires);
                    self.command_line.push_info(&new_cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(new_cmd));
                }
            }

            "FILLET" => {
                use crate::modules::draw::modify::fillet::FilletCommand;
                let entities: Vec<_> = self.tabs[i]
                    .scene
                    .entity_wires()
                    .iter()
                    .filter_map(|w| {
                        let h = Scene::handle_from_wire_name(&w.name)?;
                        self.tabs[i]
                            .scene
                            .document
                            .get_entity(h)
                            .cloned()
                            .map(|e| (h, e))
                    })
                    .collect();
                let all_entities: Vec<_> = entities.into_iter().map(|(_, e)| e).collect();
                let new_cmd = FilletCommand::new(
                    crate::modules::draw::defaults::get_fillet_radius(),
                    all_entities,
                );
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "ARRAY" | "ARRAYRECT" => {
                let handles: Vec<_> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .into_iter()
                    .map(|(h, _)| h)
                    .collect();
                if handles.is_empty() {
                    use crate::modules::draw::select::SelectObjectsCommand;
                    let cmd = SelectObjectsCommand::new("ARRAYRECT");
                    self.command_line.push_info(&cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(cmd));
                } else {
                    use crate::modules::draw::modify::array::ArrayRectCommand;
                    let wires = self.tabs[i].scene.wire_models_for(&handles);
                    let new_cmd = ArrayRectCommand::new(handles, wires);
                    self.command_line.push_info(&new_cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(new_cmd));
                }
            }

            "ARRAYPOLAR" => {
                let handles: Vec<_> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .into_iter()
                    .map(|(h, _)| h)
                    .collect();
                if handles.is_empty() {
                    use crate::modules::draw::select::SelectObjectsCommand;
                    let cmd = SelectObjectsCommand::new("ARRAYPOLAR");
                    self.command_line.push_info(&cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(cmd));
                } else {
                    use crate::modules::draw::modify::array::ArrayPolarCommand;
                    let wires = self.tabs[i].scene.wire_models_for(&handles);
                    let new_cmd = ArrayPolarCommand::new(handles, wires);
                    self.command_line.push_info(&new_cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(new_cmd));
                }
            }

            "ARRAYPATH" => {
                let handles: Vec<_> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .into_iter()
                    .map(|(h, _)| h)
                    .collect();
                if handles.is_empty() {
                    use crate::modules::draw::select::SelectObjectsCommand;
                    let cmd = SelectObjectsCommand::new("ARRAYPATH");
                    self.command_line.push_info(&cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(cmd));
                } else {
                    use crate::modules::draw::modify::array::ArrayPathCommand;
                    let wires = self.tabs[i].scene.wire_models_for(&handles);
                    let all_entities: Vec<_> = self.tabs[i]
                        .scene
                        .entity_wires()
                        .iter()
                        .filter_map(|w| {
                            let h = Scene::handle_from_wire_name(&w.name)?;
                            self.tabs[i].scene.document.get_entity(h).cloned()
                        })
                        .collect();
                    let new_cmd = ArrayPathCommand::new(handles, wires, all_entities);
                    self.command_line.push_info(&new_cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(new_cmd));
                }
            }

            "ARRAY3D" | "3DARRAY" => {
                let handles: Vec<_> = self.tabs[i]
                    .scene
                    .selected_entities()
                    .into_iter()
                    .map(|(h, _)| h)
                    .collect();
                if handles.is_empty() {
                    use crate::modules::draw::select::SelectObjectsCommand;
                    let cmd = SelectObjectsCommand::new("ARRAY3D");
                    self.command_line.push_info(&cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(cmd));
                } else {
                    use crate::modules::draw::modify::array::Array3DCommand;
                    let new_cmd = Array3DCommand::new(handles);
                    self.command_line.push_info(&new_cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(new_cmd));
                }
            }

            "CHAMFER" => {
                use crate::modules::draw::modify::fillet::ChamferCommand;
                let entities: Vec<_> = self.tabs[i]
                    .scene
                    .entity_wires()
                    .iter()
                    .filter_map(|w| {
                        let h = Scene::handle_from_wire_name(&w.name)?;
                        self.tabs[i]
                            .scene
                            .document
                            .get_entity(h)
                            .cloned()
                            .map(|e| (h, e))
                    })
                    .collect();
                let all_entities: Vec<_> = entities.into_iter().map(|(_, e)| e).collect();
                let new_cmd = ChamferCommand::new(
                    crate::modules::draw::defaults::get_chamfer_dist1(),
                    all_entities,
                );
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "EXPLODE" => {
                use crate::modules::draw::modify::explode::explode_entity;
                let entities: Vec<_> = self.tabs[i].scene.selected_entities().into_iter().collect();
                if entities.is_empty() {
                    use crate::modules::draw::select::SelectObjectsCommand;
                    let cmd = SelectObjectsCommand::new("EXPLODE");
                    self.command_line.push_info(&cmd.prompt());
                    self.tabs[i].active_cmd = Some(Box::new(cmd));
                } else {
                    let replacements: Vec<(acadrust::Handle, Vec<acadrust::EntityType>)> = entities
                        .iter()
                        .filter_map(|(h, e)| {
                            let pieces = explode_entity(e, &self.tabs[i].scene.document);
                            if pieces.is_empty() {
                                None
                            } else {
                                Some((*h, pieces))
                            }
                        })
                        .collect();
                    let exploded = replacements.len();
                    if exploded > 0 {
                        self.push_undo_snapshot(i, "EXPLODE");
                    }
                    for (handle, pieces) in replacements {
                        self.tabs[i].scene.erase_entities(&[handle]);
                        for piece in pieces {
                            self.tabs[i].scene.add_entity(piece);
                        }
                    }
                    if exploded > 0 {
                        self.tabs[i].dirty = true;
                        self.refresh_properties();
                        self.command_line
                            .push_output(&format!("{exploded} object(s) exploded."));
                    } else {
                        self.command_line
                            .push_info("EXPLODE: no explodable objects selected.");
                    }
                }
            }

            "OFFSET" => {
                use crate::modules::draw::modify::offset::OffsetCommand;
                let all_entities: Vec<_> = self.tabs[i]
                    .scene
                    .entity_wires()
                    .iter()
                    .filter_map(|w| {
                        let h = Scene::handle_from_wire_name(&w.name)?;
                        self.tabs[i].scene.document.get_entity(h).cloned()
                    })
                    .collect();
                let new_cmd = OffsetCommand::new(all_entities);
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "TRIM" => {
                use crate::modules::draw::modify::trim::TrimCommand;
                let entities: Vec<_> = self.tabs[i]
                    .scene
                    .entity_wires()
                    .iter()
                    .filter_map(|w| {
                        let h = Scene::handle_from_wire_name(&w.name)?;
                        self.tabs[i]
                            .scene
                            .document
                            .get_entity(h)
                            .cloned()
                            .map(|e| (h, e))
                    })
                    .collect();
                let all_entities: Vec<_> = entities.into_iter().map(|(_, e)| e).collect();
                let new_cmd = TrimCommand::new(all_entities);
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "EXTRIM" => {
                use crate::modules::draw::modify::trim::ExtrimCommand;
                let all: Vec<_> = self.tabs[i]
                    .scene
                    .entity_wires()
                    .iter()
                    .filter_map(|w| {
                        let h = Scene::handle_from_wire_name(&w.name)?;
                        self.tabs[i].scene.document.get_entity(h).cloned().map(|e| (h, e))
                    })
                    .collect();
                let new_cmd = ExtrimCommand::new(all);
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            "EXTEND" => {
                use crate::modules::draw::modify::trim::ExtendCommand;
                let entities: Vec<_> = self.tabs[i]
                    .scene
                    .entity_wires()
                    .iter()
                    .filter_map(|w| {
                        let h = Scene::handle_from_wire_name(&w.name)?;
                        self.tabs[i]
                            .scene
                            .document
                            .get_entity(h)
                            .cloned()
                            .map(|e| (h, e))
                    })
                    .collect();
                let all_entities: Vec<_> = entities.into_iter().map(|(_, e)| e).collect();
                let new_cmd = ExtendCommand::new(all_entities);
                self.command_line.push_info(&new_cmd.prompt());
                self.tabs[i].active_cmd = Some(Box::new(new_cmd));
            }

            // DIMJOGGED <DJO> — create a jogged radius dimension on the selected
            // arc/circle: a standard radius dim carrying an OCS_JOGGED XData marker
            // that the geometry generator renders with a foreshortened zig-zag.
            "DIMJOGGED" | "DIMJOG" => {
                use acadrust::entities::{Dimension, DimensionRadius};
                use acadrust::types::Vector3;
                use acadrust::xdata::{ExtendedDataRecord, XDataValue};
                let found =
                    self.tabs[i]
                        .scene
                        .selected_entities()
                        .iter()
                        .find_map(|(_, e)| match e {
                            acadrust::EntityType::Arc(a) => Some((a.center, a.radius)),
                            acadrust::EntityType::Circle(c) => Some((c.center, c.radius)),
                            _ => None,
                        });
                let Some((center, radius)) = found else {
                    self.command_line
                        .push_error("DIMJOGGED: select an arc or circle first.");
                    return None;
                };
                if radius <= 0.0 {
                    self.command_line.push_error("DIMJOGGED: invalid radius.");
                    return None;
                }
                let k = std::f64::consts::FRAC_1_SQRT_2;
                let arc_point =
                    Vector3::new(center.x + radius * k, center.y + radius * k, center.z);
                let mut dim = DimensionRadius::new(center, arc_point);
                dim.base.common.layer = self.tabs[i].active_layer.clone();
                let mut rec = ExtendedDataRecord::new("OCS_JOGGED");
                rec.add_value(XDataValue::String("1".to_string()));
                dim.base.common.extended_data.add_record(rec);
                self.push_undo_snapshot(i, "DIMJOGGED");
                self.tabs[i]
                    .scene
                    .add_entity(acadrust::EntityType::Dimension(Dimension::Radius(dim)));
                self.tabs[i].dirty = true;
                self.command_line
                    .push_output("DIMJOGGED: created a jogged radius dimension.");
            }

            // ARCTEXT <text> — lay the text out as one Text entity per character
            // along the selected arc, each rotated to follow the tangent.
            "ARCTEXT" => {
                use crate::command::SelectThenValueCommand;
                let has_sel = !self.tabs[i].scene.selected_entities().is_empty();
                let c = SelectThenValueCommand::new(
                    "ARCTEXT",
                    "ARCTEXT  text to place along the arc:",
                    has_sel,
                );
                self.command_line.push_info(&c.prompt());
                self.tabs[i].active_cmd = Some(Box::new(c));
            }
            cmd if cmd.starts_with("ARCTEXT ") => {
                use acadrust::entities::Text;
                use acadrust::types::Vector3;
                let text = cmd.strip_prefix("ARCTEXT").unwrap_or("").trim().to_string();
                if text.is_empty() {
                    self.command_line.push_info(
                        "Usage: ARCTEXT <text>   (select an arc first; the text follows it)",
                    );
                    return None;
                }
                let arc =
                    self.tabs[i]
                        .scene
                        .selected_entities()
                        .iter()
                        .find_map(|(_, e)| match e {
                            acadrust::EntityType::Arc(a) => Some(a.clone()),
                            _ => None,
                        });
                let Some(arc) = arc else {
                    self.command_line
                        .push_error("ARCTEXT: select an arc first.");
                    return None;
                };
                let chars: Vec<char> = text.chars().filter(|c| !c.is_control()).collect();
                if chars.is_empty() {
                    self.command_line.push_error("ARCTEXT: no printable text.");
                    return None;
                }
                let n = chars.len();
                let mut span = arc.end_angle - arc.start_angle;
                if span <= 0.0 {
                    span += std::f64::consts::TAU;
                }
                let height = (arc.radius * 0.12).max(0.1);
                self.push_undo_snapshot(i, "ARCTEXT");
                for (k, ch) in chars.iter().enumerate() {
                    let ang = arc.start_angle + span * (k as f64 + 0.5) / n as f64;
                    let pos = Vector3::new(
                        arc.center.x + arc.radius * ang.cos(),
                        arc.center.y + arc.radius * ang.sin(),
                        arc.center.z,
                    );
                    let t = Text::with_value(ch.to_string(), pos)
                        .with_height(height)
                        .with_rotation(ang + std::f64::consts::FRAC_PI_2);
                    self.tabs[i].scene.add_entity(acadrust::EntityType::Text(t));
                }
                self.tabs[i].dirty = true;
                self.command_line
                    .push_output(&format!("ARCTEXT: placed {n} character(s) along the arc."));
            }

            _ => return None,
        }
        Some(self.finish_dispatch(cmd))
    }
}

/// Find the last placed linear or aligned dimension in the document.
/// Returns `(first_point, second_point, definition_point, rotation_rad)` in world-space.
fn find_last_linear_dim(
    scene: &crate::scene::Scene,
) -> Option<(glam::Vec3, glam::Vec3, glam::Vec3, f64, f64)> {
    use acadrust::entities::Dimension;
    let mut best_handle: u64 = 0;
    let mut result: Option<(glam::Vec3, glam::Vec3, glam::Vec3, f64, f64)> = None;

    for entity in scene.document.entities() {
        if let acadrust::EntityType::Dimension(dim) = entity {
            let h = entity.common().handle.value();
            if h <= best_handle {
                continue;
            }
            let item = match dim {
                Dimension::Linear(d) => {
                    let p1 = glam::Vec3::new(
                        d.first_point.x as f32,
                        d.first_point.y as f32,
                        d.first_point.z as f32,
                    );
                    let p2 = glam::Vec3::new(
                        d.second_point.x as f32,
                        d.second_point.y as f32,
                        d.second_point.z as f32,
                    );
                    let dp = glam::Vec3::new(
                        d.base.definition_point.x as f32,
                        d.base.definition_point.y as f32,
                        d.base.definition_point.z as f32,
                    );
                    Some((p1, p2, dp, d.rotation, d.base.text_rotation))
                }
                Dimension::Aligned(d) => {
                    let p1 = glam::Vec3::new(
                        d.first_point.x as f32,
                        d.first_point.y as f32,
                        d.first_point.z as f32,
                    );
                    let p2 = glam::Vec3::new(
                        d.second_point.x as f32,
                        d.second_point.y as f32,
                        d.second_point.z as f32,
                    );
                    let dp = glam::Vec3::new(
                        d.base.definition_point.x as f32,
                        d.base.definition_point.y as f32,
                        d.base.definition_point.z as f32,
                    );
                    let dx = (d.second_point.x - d.first_point.x) as f32;
                    let dy = (d.second_point.y - d.first_point.y) as f32;
                    let rot = dy.atan2(dx) as f64;
                    Some((p1, p2, dp, rot, d.base.text_rotation))
                }
                _ => None,
            };
            if let Some(data) = item {
                best_handle = h;
                result = Some(data);
            }
        }
    }
    result
}

/// Collect candidate dimension endpoints from an entity for QDIM — line ends,
/// polyline vertices, arc endpoints — in world space.
fn qdim_collect_points(e: &acadrust::EntityType, out: &mut Vec<glam::DVec3>) {
    use acadrust::EntityType as ET;
    let p = |v: &acadrust::types::Vector3| glam::DVec3::new(v.x, v.y, v.z);
    match e {
        ET::Line(l) => {
            out.push(p(&l.start));
            out.push(p(&l.end));
        }
        ET::LwPolyline(pl) => {
            for v in &pl.vertices {
                out.push(glam::DVec3::new(
                    v.location.x,
                    v.location.y,
                    pl.elevation,
                ));
            }
        }
        ET::Polyline(pl) => {
            for v in &pl.vertices {
                out.push(p(&v.location));
            }
        }
        ET::Arc(a) => {
            for &ang in &[a.start_angle, a.end_angle] {
                out.push(glam::DVec3::new(
                    a.center.x + a.radius * ang.cos(),
                    a.center.y + a.radius * ang.sin(),
                    a.center.z,
                ));
            }
        }
        _ => {}
    }
}

// ── TCASE helpers ──────────────────────────────────────────────────────────
fn sentence_case(s: &str) -> String {
    let mut c = s.chars();
    match c.next() {
        Some(first) => first.to_uppercase().collect::<String>() + &c.as_str().to_lowercase(),
        None => String::new(),
    }
}

fn title_case(s: &str) -> String {
    s.split(' ')
        .map(|w| {
            let mut c = w.chars();
            match c.next() {
                Some(f) => f.to_uppercase().collect::<String>() + &c.as_str().to_lowercase(),
                None => String::new(),
            }
        })
        .collect::<Vec<_>>()
        .join(" ")
}