Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL

docs/parity.md

@@ -2,13 +2,13 @@
 
 Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (`solvecraft-cli commands`). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.
 
-**SOLID + SKETCH: 57 / 291 commands live (20%).** All Design tabs: 137 / 1175 (12%). Registered commands: 78.
+**SOLID + SKETCH: 59 / 291 commands live (20%).** All Design tabs: 145 / 1175 (12%). Registered commands: 83.
 
 | Tab | Panel | Live | Total | % |
 |---|---|---:|---:|---:|
 | SOLID | CREATE | 13 | 35 | 37% |
 | SOLID | MODIFY | 10 | 32 | 31% |
-| SOLID | ASSEMBLE | 0 | 21 | 0% |
+| SOLID | ASSEMBLE | 1 | 21 | 5% |
 | SOLID | CONFIGURE | 0 | 3 | 0% |
 | SOLID | CONSTRUCT | 2 | 20 | 10% |
 | SOLID | INSPECT | 1 | 25 | 4% |
@@ -20,13 +20,13 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 | SKETCH | CONSTRAINTS | 11 | 15 | 73% |
 | SKETCH | CONFIGURE | 0 | 3 | 0% |
 | SKETCH | INSPECT | 1 | 25 | 4% |
-| SKETCH | INSERT | 0 | 13 | 0% |
+| SKETCH | INSERT | 1 | 13 | 8% |
 | SKETCH | ASSEMBLE | 0 | 1 | 0% |
 | SKETCH | SELECT | 0 | 15 | 0% |
 | SKETCH | FINISH SKETCH | 1 | 2 | 50% |
 | SURFACE | CREATE | 4 | 25 | 16% |
 | SURFACE | MODIFY | 7 | 26 | 27% |
-| SURFACE | ASSEMBLE | 0 | 20 | 0% |
+| SURFACE | ASSEMBLE | 1 | 20 | 5% |
 | SURFACE | CONFIGURE | 0 | 3 | 0% |
 | SURFACE | CONSTRUCT | 2 | 20 | 10% |
 | SURFACE | INSPECT | 1 | 25 | 4% |
@@ -36,7 +36,7 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 | MESH | CREATE | 0 | 5 | 0% |
 | MESH | PREPARE | 0 | 4 | 0% |
 | MESH | MODIFY | 4 | 30 | 13% |
-| MESH | ASSEMBLE | 0 | 21 | 0% |
+| MESH | ASSEMBLE | 1 | 21 | 5% |
 | MESH | CONFIGURE | 0 | 3 | 0% |
 | MESH | CONSTRUCT | 2 | 20 | 10% |
 | MESH | INSPECT | 1 | 25 | 4% |
@@ -50,13 +50,13 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 | FORM | UTILITIES | 0 | 5 | 0% |
 | FORM | CONSTRUCT | 2 | 20 | 10% |
 | FORM | INSPECT | 1 | 25 | 4% |
-| FORM | INSERT | 0 | 13 | 0% |
+| FORM | INSERT | 1 | 13 | 8% |
 | FORM | ASSEMBLE | 0 | 1 | 0% |
 | FORM | SELECT | 0 | 15 | 0% |
 | FORM | FINISH FORM | 0 | 1 | 0% |
 | SHEET METAL | CREATE | 6 | 19 | 32% |
 | SHEET METAL | MODIFY | 6 | 21 | 29% |
-| SHEET METAL | ASSEMBLE | 0 | 20 | 0% |
+| SHEET METAL | ASSEMBLE | 1 | 20 | 5% |
 | SHEET METAL | CONFIGURE | 0 | 3 | 0% |
 | SHEET METAL | CONSTRUCT | 2 | 20 | 10% |
 | SHEET METAL | INSPECT | 1 | 25 | 4% |
@@ -67,14 +67,14 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 | PLASTIC | SETUP | 0 | 2 | 0% |
 | PLASTIC | CREATE | 13 | 35 | 37% |
 | PLASTIC | MODIFY | 10 | 32 | 31% |
-| PLASTIC | ASSEMBLE | 0 | 20 | 0% |
+| PLASTIC | ASSEMBLE | 1 | 20 | 5% |
 | PLASTIC | CONFIGURE | 0 | 3 | 0% |
 | PLASTIC | CONSTRUCT | 2 | 20 | 10% |
 | PLASTIC | INSPECT | 1 | 26 | 4% |
 | PLASTIC | INSERT | 0 | 11 | 0% |
 | PLASTIC | SELECT | 0 | 15 | 0% |
 | PLASTIC | POSITION | 0 | 2 | 0% |
-| ASSEMBLY | INSERT | 0 | 8 | 0% |
+| ASSEMBLY | INSERT | 1 | 8 | 12% |
 | ASSEMBLY | CREATE | 3 | 8 | 38% |
 | ASSEMBLY | RELATIONSHIPS | 0 | 11 | 0% |
 | ASSEMBLY | MOTION | 0 | 3 | 0% |
@@ -125,6 +125,7 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 - SOLID › MODIFY › Delete (`FusionDeleteCommand`)
 - SOLID › MODIFY › Change Parameters (`ChangeParameterCommand`)
 - SOLID › MODIFY › Compute All (`FusionComputeAllCommand`)
+- SOLID › ASSEMBLE › Insert Component (`FusionImportCommandFromToolbar`)
 - SOLID › CONSTRUCT › Offset Plane (`ConstructionPlaneOffsetFromPlaneCommand`)
 - SOLID › CONSTRUCT › Plane at Angle (`ConstructionPlaneAtAngleCommand`)
 - SOLID › INSPECT › Measure (`MeasureCommand`)
@@ -158,6 +159,7 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 - SKETCH › CONSTRAINTS › Collinear (`ConstraintCollinear`)
 - SKETCH › CONSTRAINTS › Symmetry (`ConstraintSymmetry`)
 - SKETCH › INSPECT › Measure (`MeasureCommand`)
+- SKETCH › INSERT › Insert Component (`FusionImportCommandFromToolbar`)
 - SKETCH › FINISH SKETCH › Finish Sketch (`SketchStop`)
 
 ## Not yet (SOLID, SKETCH)
@@ -206,7 +208,6 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 - SOLID › MODIFY › Compute Unresolved (`FusionComputeUnresolvedCommand`)
 - SOLID › MODIFY › Convert (`TSpline2BRepCommand`)
 - SOLID › MODIFY › Bill of Materials (`MaterializedBomHybridCmd`)
-- SOLID › ASSEMBLE › Insert Component (`FusionImportCommandFromToolbar`)
 - SOLID › ASSEMBLE › New Component (`FusionCreateNewComponentCommand`)
 - SOLID › ASSEMBLE › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
 - SOLID › ASSEMBLE › Constrain Components (`AssemblyMateCommand`)
@@ -372,7 +373,6 @@ Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the tool
 - SKETCH › INSERT › Insert SVG (`SketchImportSVG`)
 - SKETCH › INSERT › Insert DXF (`ImportDxfFileCommand`)
 - SKETCH › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)
-- SKETCH › INSERT › Insert Component (`FusionImportCommandFromToolbar`)
 - SKETCH › INSERT › Insert Fastener (`FusionFastenersCommand`)
 - SKETCH › INSERT › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)
 - SKETCH › INSERT › Insert Derive (`PullDeriveCommand`)