1b-agent/OneCAD
1
0 Fork 0
forked from 1b-agent/solidcraft-upstream
Code Pull Requests Activity
266 Commits 16 Branches 33 Tags
1e8fc25976dc9bf8def61ce2eba33f5dd044d2a0
Commit Graph
51 Commits
Author SHA1 Message Date
bherbruckandClaude Opus 5.5 1e8fc25976 X and the toolbar's Construction no longer start a pick tool (Fusion has none): with a selection they convert it, with nothing selected they switch construction mode, outside a sketch they say so. Center Rectangle draws both diagonals as construction, the centre at their crossing, with only the first carrying the midpoint constraint (the second is implied), so a fresh one stays at 4 DOF. Scenarios s30 (pattern a hole) and s32 (cut in the active component) enabled now that b36b332 is on main 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 16:07:33 +00:00
bherbruckandClaude Opus 5.5 90873e51bb Construction mode like Fusion: with nothing selected, X (or the toolbar's Construction, or the Sketch Palette's Linetype) switches the drawing line type, so new curves are construction (or centerline) until switched back, the active mode highlighted in the palette and named in the status bar; with a selection they convert it as before; the line type is part of the drawing's undo step. Scenarios: s35 construction mode, s36 the Sketch Palette shows while sketching (also over the tools, back after a window closes, both themes) and goes with the sketch; harness shown/not_shown checks 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 16:07:33 +00:00
bherbruckandClaude Opus 5.5 1970b8c680 Viewport: a soft ground shadow under the model, seen from above (ui groundShadow, on by default) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 54c7690271 Viewport: silhouette outlines on curved surfaces (back faces pushed out on screen, drawn behind the model) in the styles with edges; new visual style Shaded with Hidden Edges (edges behind the model drawn faintly) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 aee1e941bf Camera: Fit (F6, navigation bar) frames the selection when there is one; the wheel zooms toward the model's surface under the cursor 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 2b9ed16cc8 Move/Copy like Fusion: opens with nothing moved and a full triad at the bodies' centre (X/Y/Z arrows, plane squares, rotation rings, free-drag centre ball; snapped drags, Alt/Ctrl free), Move Type (Free Move, Translate, Rotate, Point to Point, Point to Position), X/Y/Z distances and angles with live preview, a pivot input; the triad is one shared module (gizmo.rs); UI scenario s27 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 14:14:29 +00:00
bherbruckandClaude Opus 5.5 59b59a83e6 UI scenarios: the user's four open bugs as ignored targets (s31 sketch on a face projects its loops, s32 a cut in the active component leaves others alone, s33 Move opens at 0 and its X arrow moves along X, s34 moving a component carries its sketches); Fold, configurations, motion study and autosave/recovery enabled against the landed features (s22–s25); retests: fillets follow their edge after a sketch edit (s06 volume, s15 widens the sample plate), one canvas panel (s19); s30 patterns a hole as a feature (ignored: one hole results). Harness: manipulator handles published by name (scenario::publish_handle; ui.at {handle}; timeline items as timeline:<name>), restart after a crash or close, autosave into the scenario's folder, exact widget text before menu-label prefixes, checks for sketch curves, body volume and sketch points in the world 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 13:27:43 +00:00
bherbruckandClaude Opus 5.5 fec99468d2 Capture Position question: starting a command or saving while components were moved without capturing asks Capture Position / Revert / Cancel, then goes ahead; ui.capture control method 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 12:52:22 +00:00
bherbruckandClaude Opus 5.5 c99e7e41ec Preferences window (File › Preferences): theme, units of new designs, recovery copies every N minutes (to a Recovery folder beside the preferences), mouse presets (Fusion, SolidWorks, Inventor), reverse zoom, orbit around the point under the cursor, grid, perspective, visual style, display precision, anti-aliasing (on restart), sketch and selection options; all kept between runs; ui.prefs control method 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 12:09:31 +00:00
bherbruckandClaude Opus 5.5 bfa70f005b Help menu (? on the application bar): About SolveCraft (version, commit, build date, ATTRIBUTION.md, fonts, licences), Keyboard Shortcuts read only, Report an Issue copies diagnostics (version, OS, GPU); ui.help control method 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 12:09:31 +00:00
bherbruckandClaude Opus 5.5 5096bf2442 Dialogs for contact sets, motion studies, exploded views and configurations; Drive scenario 
Wired to solvecraft-params' contact, motion, explode and configuration commands (verified under Xvfb: a study keyed 0 to 60 deg plays, an explosion previews and OK keeps it, Activate switches configurations, Check collisions lists overlaps):
- Contact Set: components to a new set; the sets with suppress and delete; contact on/off;
  Check collisions (contact.check).
- Motion Study: tracks of keyed joint values on a strip under the steps, keys added and edited
  at the playhead, a step slider with Play; the pose at the step is shown (motion.play on a
  scratch copy, as pending moves) and put back when the dialog closes.
- Exploded View: a scale slider showing the explosion live; OK creates and shows the view.
- Configurations: the table (rows by columns of parameters and suppressed features), cells
  edited in place, Activate per row, rows and columns added and removed.
The ASSEMBLE panel lists the motion and contact commands once they exist. Tests for the pose,
table and study mappings.

Scenario s13: Drive Joints takes typed input without a click.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 12:02:55 +00:00
bherbruckandClaude Opus 5.5 f40356a74f Never lose work: atomic saves (temporary file, flush, rename) keeping the replaced version as <file>.bak; autosave of unsaved changes into a recovery folder (every 5 min, preference autosave_minutes, and after commands over 1.5 s; skipped when unchanged; entries locked while their app runs); Recover unsaved design? at launch; doc.recovery_list / doc.recover / doc.recovery_discard; kill-mid-save test 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 11:37:33 +00:00
bherbruckandClaude Opus 5.5 940c425316 Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 10:36:53 +00:00
bherbruckandClaude Opus 5.5 a7fc1fe532 S box: command search at the cursor (fuzzy over name, id, tab and panel; recent first; pinned favourites as a mini toolbar; kept between runs); Named Views in the browser (save the camera, restore animated, rename, update, delete; Top/Front/Right/Home listed; view.save/rename/delete/list, saved in the design); Keyboard Shortcuts (File menu): rebind any command, conflicts reported, clear, reset, kept between runs; ui.shortcut control method 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 10:29:11 +00:00
bherbruckandClaude Opus 5.5 d0a9ef27ca Appearance dialog (MODIFY > Appearance, A) 
Library swatches by category (the engine's library when it offers one, else built-in looks:
metals, plastics, paints, woods, glass with opacity), the looks in this design, a colour picker
and opacity, and the objects to apply to (bodies/components or faces). A swatch dragged onto a
body or face in the viewport, or onto a body's row in the Browser, applies at once; Apply and
OK give the picked objects the current look; pre-selected bodies become the objects.

Browser: rows under a drag of another kind count as hovered, and the Browser's own drops no
longer swallow other payloads (egui's take_payload takes any type), so swatches dropped on its
rows land.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 10:22:53 +00:00
bherbruckandClaude Opus 5.5 3aacebdda4 Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:42:34 +00:00
bherbruckandClaude Opus 5.5 d5b8aa0375 User scenarios in the real UI, headless: scenario::Harness draws the app frame by frame into an egui context and drives it with control-channel input (toolbar starts, clicks on world/sketch/origin-plane/axis points, keys, typing, drags) and checks the model; tests/scenarios/*.json: box with fillets, shell and hole; revolve on XZ; sketch on a face and cut; mirror; delete and undo. Control: ui.at, ui.dialogInput. Fixes found by them: a shape started on an existing point (the origin, a corner) is tied to it; the Dimension tool's value is edited in place with the value selected, so typing replaces it 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:32:49 +00:00
bherbruckandClaude Opus 5.5 bdc15d2204 Start page and document tabs 
Start page (shown on launch without a file, and from the house button in the application bar):
New Design, Open, recent designs (kept in the preferences, newest first) and built-in samples,
each card with a picture rendered from the design in the background. Samples are scripts of
engine commands: the sample plate plus a sheet metal bracket, a hinge assembly with a revolute
joint, a plastic enclosure (lip, bosses, rest, snap fit), a bolted flange with a parametric
circular pattern and a vent plate with a parametric rectangular pattern (test: all build
without a failing feature).

Several open designs as tabs in the application bar: each keeps its own session (undo,
selection), camera and hidden/shown items; + and Ctrl+N open a new design, opening a file or a
sample uses a new tab unless the current design is blank, closing a tab with unsaved changes
asks Save / Don't Save / Cancel. Control channel: ui.documents and ui.home (docs/control-protocol.md).

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 09:23:46 +00:00
bherbruckandClaude Opus 5.5 2ac226cf0a Line tool inference like Fusion: parallel or perpendicular to existing lines, on a line's extension and tangent to circles and arcs, shown with a dashed guide and the snap label; placing the point adds the constraint (the existing curve stays, the new line follows) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 d40ef5bbdc 3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 08:39:22 +00:00
bherbruckandClaude Opus 5.5 bbd0a19260 Sketch Palette, docked at the right while sketching: line type of the selected curves (normal, construction, centerline), Look At, and options kept with each sketch (sketch.options: Sketch Grid, Snap, Slice, Show Profile, Show Points, Show Dimensions, Show Constraints, Show Projected Geometries, 3D Sketch), the degrees of freedom, Finish Sketch. Slice cuts the model at the sketch plane; Snap off places points at the cursor 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:50:35 +00:00
bherbruckandClaude Opus 5.5 66fa6fe584 Dialogs for joints, sheet metal and plastic 
ASSEMBLE panel (SOLID, SHEET METAL, PLASTIC): New Component, Joint, As-built Joint, Joint Origin,
Rigid Group, Drive Joints, Motion Link, Interference. Joint origins are picked by hovering:
faces snap to their centre (round faces to the centre of the nearer end), edges to their middle
(round edges to their centre), vertices to themselves, shown as glyphs with their z axis. The
Joint dialog has the motion type, angle, offsets X/Y/Z, flip, per-value limits and Animate (the
preview plays the motion); joints and drives preview on the placed model (world states).
Drive Joints moves live with a slider. Interference lists the overlaps and shows them red.
Joints appear in the timeline and in a Browser Joints folder (edit, drive, suppress, delete).

SHEET METAL tab in Fusion's layout: Flange (base, edge or contour, from the picks; height arrow
on the canvas), Hem, Unfold, Refold, Convert to Sheet Metal, Sheet Metal Rules (rule manager),
Create Flat Pattern (flat view with up/down bend lines, bend table, DXF export).

PLASTIC tab with SETUP: Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Rib,
Web and the shared solid commands on the tab.

Every feature dialog has live preview, Edit Feature and pre-selection; icons drawn in code.
Toolbar layout per tab in workspace.rs; tests for the dialog to command mapping.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 07:29:26 +00:00
bherbruckandClaude Opus 5.5 a7f301bde6 Delete for everything: selection.delete removes sketch entities, features and sketches (with their dependents), construction planes, bodies (Remove feature), occurrences and components, and canvases in one undo step, with a dry run; Delete/Backspace and every menu's Delete go through it and ask first, listing what goes with it and what would fail; faces say Delete Face is not available yet; ui.confirm control method 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 06:44:11 +00:00
bherbruckandClaude Opus 5.5 584cb7e8a0 Browser: Show Dimensions for finished sketches 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 06:01:41 +00:00
bherbruckandClaude Opus 5.5 89c2c440ac Dialog parity with Fusion: header with fold glyph, label column, Select/N selected chips, info glyph and OK greyed until valid, Fusion colours; Extrude rows Start (profile plane/offset), Direction (one side, two sides, symmetric), Extent Type (distance/all), Taper Angle; Hole rows Placement (single/multiple sketch points), Extents, Hole Tap Type (tapped size), Drill Point, Tip Angle; pattern Type switch; Mirror operation; pre-selection routes every item to the input that takes it (planar-only inputs, fillet tangent chains), with tests 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:51:10 +00:00
bherbruckandClaude Opus 5.5 00ddaa25f5 Canvas and Decal (FusionAddCanvasCommand, FusionAddEditDecalCommand): PNG/JPEG reference images stored in the design (base64), placed on an origin/construction plane, a sketch plane or a planar face; canvas.edit (position, width, angle, opacity, flip, visibility), canvas.calibrate (scale by a known distance), canvas.delete; drawn textured in the viewport; toolbar tools pick the file, then the plane or face 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:31:06 +00:00
bherbruckandClaude Opus 5.5 5b8816aa7d Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:12:13 +00:00
bherbruckandClaude Opus 5.5 b457b6b7b6 Sketch: lines snap to horizontal/vertical near the axes (with an H/V marker; the constraint is inferred), inline dimension boxes sit beside what they measure instead of on it; Esc acts once per press (ends the line chain first, then the tool) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 05:05:48 +00:00
bherbruckandClaude Opus 5.5 187ffd0a03 Sketch dimensions drawn as dimensions: extension lines, dimension lines and arcs with arrowheads (flipped outside when tight), the value centred on the line (fx: for expressions), R/Ø leaders, angle arcs, arc-length mark, driven ones in parentheses in a muted colour; click selects, Delete removes, drag moves the text (sketch.dimension_text, kept relative to the dimension), double-click edits the value in place with parameter completion 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 04:44:24 +00:00
bherbruckandClaude Opus 5.5 178fc47ed7 Custom title bar: on Windows and Linux the application bar is the window's title bar (drag to move with OS snapping, double-click to maximize or restore, minimize/maximize/close buttons, resize from the edges and corners); macOS keeps its traffic lights over the bar; the web build has no window buttons; ui.window control method (adapted from VectorCraft) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 04:13:38 +00:00
bherbruckandClaude Opus 5.5 9a9caa6511 Browser tree: components with an activation radio (others drawn faded), ground pin, groups in Bodies/Sketches/Construction (new, from selection, rename, ungroup, kept in the design: browser.group/ungroup/rename_group/move/order), drag and drop to reorder, into and out of groups and into another component, Ctrl/Shift multi-select, hover lights the bodies, folds remembered; occurrence Move/Copy with a gizmo and Capture Position/Revert; the viewport shows bodies where their occurrences place them 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 03:37:36 +00:00
bherbruckandClaude Opus 5.5 d729918034 Change Parameters dialog (params_dialog.rs): favourites, user parameters (unit, expression, value, comment; add, rename, delete) and model parameters grouped by sketch or feature, live validation and preview while typing, CSV/JSON import and export; parameter-name autocomplete (Tab) in every expression box: dialogs, inline sketch dimensions, manipulator values 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 02:38:58 +00:00
bherbruckandClaude Opus 5.5 888ac0f5c4 Navigation bar: Look At (selected face or plane, else the active sketch) and visual style (shaded with edges, shaded, wireframe; kept between runs); F6 fits the view 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 02:22:43 +00:00
bherbruckandClaude Opus 5.5 fa8da64613 Context menus: radial marking menu in the viewport (Repeat on top, Undo, Delete, Press Pull, Create Sketch, Extrude, Move/Copy, Hole; right press-and-hold or a right drag on the ring flicks to pick), contextual lists for faces, edges, bodies, sketch entities (construction, fix, applicable constraints) and empty space; browser menus for bodies, sketches and components; rename box, Properties window; body.rename and sketch.redefine commands; ui.menu / ui.menuPick / ui.rename control methods 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 01:38:52 +00:00
bherbruckandClaude Opus 5.5 7a0cc85392 Preferences (File menu): theme, grid, perspective, auto-project face edges, body selection; all kept between runs 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 01:20:33 +00:00
bherbruckandClaude Opus 5.5 24627d4f0a Selection filter in the SELECT panel: select bodies (a face picks and highlights its body), faces, edges, vertices, sketch geometry 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:45:38 +00:00
bherbruckandClaude Opus 5.5 cde3af7a3c UI: interactive tools for the new sketch commands (crates/ui-egui/src/sketch_tools.rs): Project/Intersect/Include and the other model-pick tools, Trim/Extend/Break by clicking the piece, Offset (curve then side), sketch Fillet/Chamfer at a corner (radius dialog), Curvature, tangent circles, SketchConstrainer, Polygon, Mirror and sketch patterns, Project To Surface, Intersection Curve, Spun Profile, point tools for midpoint line, tangent arc, ellipse, conic, splines, arc slots, blend curve, and a text box for Text; constraint glyphs on the active sketch; text outline points hidden. Hooks in tools.rs/viewport.rs/lib.rs are a few lines 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-08 00:28:02 +00:00
bherbruckandClaude Opus 5.5 79a4194f6e Revolve angle rotator (drag the arc end, 5 degree steps), right-click menu in the viewport (Repeat last command, commands for the selection, fit/home/undo), larger inline sketch dimension boxes 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 22:46:34 +00:00
bherbruckandClaude Opus 5.5 956492c993 Dark theme (default): Fusion-like blue-grey viewport #2e3440, darker chrome, subtle grid, light text, blue accent; light theme kept as a second Tokens set; toggle on the application bar (sun/moon), ui.set {dark}, kept between runs (eframe storage; browser local storage on the web); viewport, sketch, glyph, view cube, timeline and overlay colours all come from the theme; preview spinner and state in ui.inspect 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 22:30:36 +00:00
bherbruckandClaude Opus 5.5 71a1903122 Fix: sketch edit exit (double-click a sketch no longer traps you) 
Edit Sketch rolls the timeline back to just after the sketch and faces it;
Finish Sketch, Esc (once nothing else is left to cancel) and editing another
feature all leave it, restoring the marker and the previous view. Editing the
open sketch again is a no-op and editing another sketch switches cleanly.
The control channel's ui.click takes double: true.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 22:25:45 +00:00
bherbruckandClaude Opus 5.5 eb22a149b1 Sketch inline dimensions while drawing (line length/angle, rectangle width/height, circle diameter, arc radius/sweep, polygon radius/sides, slot length/width): boxes sit on what they measure, typing goes into the first box and locks it, Tab moves on, Enter places the shape, typed values become dimension constraints (expressions and units); Press Pull (Q: faces extrude/cut by sign, edges fillet), X toggles construction on selected curves, Move dialog (M) with preview 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:40:14 +00:00
bherbruckandClaude Opus 5.5 ea3dd0ed6e 3MF: export, and 3MF/STL import as mesh bodies 
Export: ExportCommand/CLI --out/MCP export with .3mf write a 3MF Core package
([Content_Types].xml, _rels/.rels, 3D/3dmodel.model; millimetres), one
mesh object and build item per body, named after it, vertices shared and
welded watertight (T-junctions between faces split), base-material colours
when bodies carry one (STEP colours now ride on bodies). Tessellation as
for STL. File > Export 3MF.

Import: doc.open/drag-drop/CLI/MCP open accept .3mf and .stl; Insert Mesh
(ParaMeshInsertAlignCommand) adds them to a design as a MeshImport feature.
Kernel mesh bodies render, measure exactly, move and export; solid
features refuse them with a clear error. 3MF reading flattens components
and build transforms, converts units, reads colours; sizes, entries,
nesting and element counts are capped.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:30:38 +00:00
bherbruckandClaude Opus 5.5 7ef3426cb3 Keyboard-first commands: E/F/H open with the on-canvas value box focused as soon as the geometry is picked (typing replaces the value, Enter applies, Tab moves on, Esc cancels), extrude direction arrow; Extrude takes planar body faces (face: [x,y,z] copies the face boundary into a sketch), so select-face-then-E press-pulls; join/cut previews show the tool body (cut see-through red) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:23:47 +00:00
bherbruckandClaude Opus 5.5 d44083d1cc Live operation previews: open feature dialogs (new or Edit Feature) evaluate on a scratch session off the UI thread (Session::preview, no document or undo changes) and draw the result in place: new surface tinted, removed material as a translucent ghost; errors show in the dialog and keep the last good preview; a failing join/cut still shows its tool body 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:09:16 +00:00
bherbruckandClaude Opus 5.5 f3dbb12b23 STEP: open/insert/drag-drop 
Import base feature (FeatureKind::Import, timeline type BaseFeature) holding
the STEP text and the file's product tree; bodies named from the file.
doc.open accepts .step/.stp (any case) as a new design; Insert STEP
(FusionImportCommandFromToolbar) adds one to the current design; File menu,
SOLID > INSERT, drag-and-drop (insert into a non-empty design, else open),
'solvecraft part.step', MCP open. Features (fillet, hole, sketch-on-face
cut, shell) work on imported bodies. Imports are cached so a file is read
once per command. Measure tightens its chord tolerance for small radii.

Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 21:01:04 +00:00
bherbruckandClaude Opus 5.5 a737ddad3b Web: apps/solvecraft-web (Trunk, eframe web runner, WebGPU or WebGL2), cargo xtask wasm in ci, web-time clocks 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 20:35:55 +00:00
bherbruckandClaude Opus 5.5 9dfd7cad60 Timeline editing: double-click or Edit Feature reopens the feature's dialog filled in (model rolled back to it, references highlighted) and rebuilds it in place; history marker drag; drag to reorder with dependency checks; context menu (edit, edit profile sketch, rename, suppress, roll marker here, find in browser, delete with dependents); hover links timeline and geometry; fillet edges and hole positions re-resolve after upstream edits (warnings when moved) 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 20:19:56 +00:00
bherbruckandClaude Opus 5.5 97e73b0935 Selection feedback and origin: hover and selected highlights (theme tokens), origin planes/axes/point at a fixed screen size with browser eye toggles, click-to-pick sketch planes and faces with camera animation (Finish Sketch returns), multi-select dialog inputs with pre-selection, tangent chains and face-to-edges, window/crossing box selection, shell/draft/mirror/hole dialogs 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 20:00:17 +00:00
bherbruckandClaude Opus 5.5 cd993e35a3 View changes animate: view cube faces, edges and corners, Home and Fit move the camera over 500 ms (quaternion slerp, ease in-out); mouse navigation cancels; control channel snaps unless animate 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
 2026-10-07 19:33:19 +00:00
bherbruckandClaude Opus 5.5 8a811f8eff M0: desktop app: toolbar, browser, timeline, GPU viewport, view cube, sketch tools, dialogs, control channel 
Co-Authored-By: Claude Opus 5.5 <[email protected]>
 2026-10-07 17:54:58 +00:00