 bherbruckandClaude Opus 5.5
|
8497542a3d
|
Chamfers with two distances or a distance and an angle (distance2 / angle, flip for which face comes first), on straight edges between planar faces; pattern copies keep them
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 15:41:02 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
83a10c813a
|
Unit-less parameters used as lengths read in the design's units (feature evaluation and parameter values; bare numbers stored in inputs stay mm); document.units checks what the geometry reads (Document::length_inputs) and writes the old unit (with it as the parameter's unit) into bare unit-less parameters that would move; cached results keyed on the design's units
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 14:25:27 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
2886399215
|
Bare lengths typed into features (commands and parameter edits) mean the design's units: they are stored with the unit written in (2 in an inch design is "2 in"); lengths with units, angles and mm designs are unchanged
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 14:25:27 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b78cb886b8
|
Configurations: a configuration table of rows (parameter expressions and feature suppressions per row) that switch the design (config.activate: undoable, all or nothing), kept through parameter renames and feature deletes; FusionStartDesignConfigModeCmd, FusionShowDesignConfigPanelCmd (with whether the design still matches the active row), config.column, config.row
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 11:37:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9f8915996d
|
Sheet metal Fold (SheetMetalFoldCmd): fold the base panel along a sketch line (followed when the sketch changes) or two points on its face; angle, bend radius and K-factor from the rule; the bend zone (BA = θ(R + K·T)) comes out of the existing sheet so the flat pattern keeps its size; the line at the bend's centre, start, end or on the mould line; the side holding a picked point stays (default the larger), flip folds down; flanges on the moving part ride along
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 11:37:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
66df249c0f
|
Plastic: Rest (round or rectangular pad, solid or hollow wall, draft) and Plastic Rules (the six-rule library, design rules from expressions using Thickness, active rule, rules assigned to bodies; a body's rule gives Boss and Rest their draft and grooves their clearance), plastic.rules; docs/oracle.md lists the plastic features as no oracle (licence) with the analytic tests that cover them
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 05:50:50 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
4adfd69d6a
|
Plastic: Boss (draft, root fillet, hole, ribs), Lip and Groove along a shelled body's rim (inside or outside edge, groove clearance), Snap Fit (cantilever arm with a catch)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:43:27 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
e5560e8035
|
Sheet metal: rules as expressions (Thickness, K-factor, bend radius, reliefs, gaps; may use parameters), sheet bodies kept as flat patterns and sewn folded from exact faces (new kernel::sew), Flange (base, edge with height to the outer face, angle, inside/outside/middle, several edges at once with corners closed to the rule gap, contour from an open chain), Hem, Unfold/Refold with cut-outs that follow the bends, Convert to Sheet Metal, flat pattern with bend lines and bend table, DXF export; recipes: sm_flange, sm_hem, unfold/refold, rule edits (oracle 67-76 all pass)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 04:11:35 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9df954cd94
|
Coil (PrimitiveCoil: diameter, two of revolutions/height/pitch, circular or square section inside/on/outside, start angle, handedness) on a new kernel helical sweep; loft to a point (sketch point sections, pyramids); recipes: a sweep along a fitted 3D helix replays as a coil (oracle 49, compared within 0.5% since Fusion's path is a spline fit) and loft point sections (oracle 37)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 01:19:55 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b5051b2744
|
Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:42:26 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
075808e7ee
|
Pattern on Path (PatternOnPath: spacing or first-to-last distance, flip, identical or path orientation; instance k moves by path(k·d) − path(0)), rectangular/circular/path patterns of bodies; recipes: path_pattern (oracle 53 passes)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:42:26 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
dd7485503a
|
Parameters: unit-aware parameters (an inch parameter reads bare numbers as inches), atan2/mod/trunc and clearer unit errors, cycle paths (a → b → a), rename with every reference following (expressions, feature inputs, dimensions, favourites, comments), deletes refused with the list of users, parameter errors shown on the features using them, parameters.add/rename/delete/comment/users/graph/complete and expr.evaluate; ChangeParameterCommand renames and favourites; hostile test no longer writes stray files
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:15:22 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
f0cfeba59b
|
Parameters engine: feature inputs as named model parameters (dN, editable, referenceable), parameters table with sources, values, dependencies (uses/used by) and cycles, favourites, comments, CSV/JSON export and import; more units (inch, mil, yd, km, nm) and functions (exp, ln, log, sign, pow, hypot)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:23:50 +00:00 |
|