Pushes to main skip boolean_props (random inputs); the nightly property-tests job runs it. The three shrunk cases are ignored tests with their issues (#1647, #1648, #1649), and proptest's failure file is named outright.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A scale across a revolution's axis keeps the face a surface of revolution and is written as one; any other refusal from the writer is an export error, not a panic.
* Chamfer: refuse a result that grew a convex edge's part (or shrank a concave one's)
A chamfer of a curved edge that runs off a face it skims (robustness seed 57's
ball rim) built a part bigger than before. Checked from the two faces' normals
at the edge; rounds and unclear angles are left to the wedge bound.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Action matrix: the sheet metal tray's relief corners refuse a 0.25 mm chamfer
Each is a 2.5 mm concave edge (the corner of a corner relief, between two
planes at right angles): a chamfer there fills at most 0.25²/2 × 2.5 = 0.08
mm³. What was built took 0.95 mm³ away; the chamfer guard now refuses it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Robustness goldens: seed 57's wrong-way chamfer is now refused (#1390)
On main with #391, seed 57's chamfer grew the part; this refuses it, so the run goes on
to its later steps and ends ok.
---------
Co-authored-by: Phanoob <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
The continuity core (kernel bridge: Hermite control rows reproducing a support surface's position, tangent, curvature and change of curvature, G0 to G3), surface.blend between two edge chains (#764), and a crown for fitted patches. Existing patches and fillets are unchanged by default (crown 0 is the plain patch bit for bit). SurfaceBlend and Patch.crown are noted under format 22.
A curved chamfer chain with straight planar ends can end across two earlier planar bevel faces, shortening their shared seam to where the new chamfer plane crosses it; picks on one tangent chain are applied once. Fixes#1303.
The mesher samples edges through a fallible evaluation, so an intersection curve whose projection fails to converge no longer panics; a boolean result with an edge that does not evaluate is refused with an error. Fixes#1252.
* Web app: read a STEP file a piece per frame, with progress and Cancel (#1376)
The kernel's STEP reader walks the file first and converts its solids afterwards,
and StepReading exposes those stages: parse and walk, then convert a solid (or a
batch) per step, then finish into the shared import cache. The web app's file
load drives it from the frame loop for about 30 ms a frame, shows the same
progress card and Cancel as the desktop, and then runs the insert or open, which
finds the file already read. The desktop path is unchanged in behaviour.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Web app: make the imported bodies' meshes a few per frame too (#1376)
After the read, the insert or open runs, and then the bodies' display meshes are
made a frame's worth at a time ("Preparing the view"), as the desktop worker
warms them, instead of all in the first frame that draws the design.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Measure now reads the picked item's exact shape (cylindrical faces, circular and arc edges,
sketch circles, arcs and lines, profiles, planes, points):
- A circle, hole or arc shows Ø, R and its length (circumference, or arc length and angle).
- A slot (a sketch profile, or a half-cylinder end of a slot in a solid) shows its width,
centre-to-centre length and overall length.
- Two items where one is round measure from the centre or axis by default (axis to axis,
axis to plane, edge or point), with the closest and farthest distances listed too; the
panel switches between centre, min and max, and the canvas line follows.
- inspect.measure and MCP `measure` (new `items` argument) add diameter, radius,
center_distance, min and max; existing fields are unchanged.
Co-authored-by: Claude Opus 5.5 <[email protected]>
The groove's facets came in sweep order, and the BSP takes each list's first
polygon as its splitter, so the tree was as deep as the list: quadratic time and
memory. An M8 x 60 mm thread ran out of tree depth after 12.9 GB. A fixed shuffle
gives a shallow tree and the same result (volume and faces equal to 1e-9).
Co-authored-by: Claude Opus 5.5 <[email protected]>
Part of #771 and #772. solid.sweep and surface.sweep take orientation (perpendicular, parallel or a direction), twist (up to 4 turns) and end scale (0.01 to 100), applied about the profile's normal through the path's start; default options run the old sweep, so existing sweeps are unchanged. New fields are optional, left out when unset and noted under format 21; twist and scale are model parameters. Both sweep dialogs get Orientation, Twist and End Scale rows; labels in every catalog. Checked on main + this branch: cargo check --workspace, kernel/engine/UI sweep tests, the doc suite and the robustness goldens.
file.insert_step and doc.open on a STEP file take `up` (turn a Y-up file so its up is +Z) and `names` (names for the imported bodies). The MCP tool and the app's control requests pass them through; an import without them works as before. Tests in the kernel's STEP reader, the engine, MCP and the file-load UI; docs/step-import.md and docs/mcp.md describe both.
A fillet or chamfer on a cylindrical boss's bottom arc now builds with a closed display mesh: the seam-extension containment ray counts a shared curved-boundary endpoint once. Merging the split faces of a three-edge arc corner rebuilds the face on the original input face's full surface instead of a piece's restricted patch, and runs under the kernel's panic guard. Fixes#1262 and #1263.
Co-authored-by: Karl-VonRichter <[email protected]>
NOWN-DEV