OneCAD

0 Fork 0

forked from 1b-agent/solidcraft-upstream

Author	SHA1	Message	Date
Mateusz Sych	4a70c03deb	Revolve: a profile that comes back to the axis along a curve revolves right, and cuts with it work (#1853 ) (#1866 ) Thanks @SychPL.	2026-10-17 13:38:41 -04:00
Moritz	9be8bb5e6b	Fix Steam Frame STEP trims and spline projection (#1974 ) (#2043 ) Thanks @moritzuehling.	2026-10-17 13:33:17 -04:00
fkirill	2c924fd385	Sweep: close circular tools before cutting a torus (#2005 ) (#2010 ) Thanks @fkirill.	2026-10-17 12:46:21 -04:00
NOWN-DEV	8a2d142333	fix: a cut takes only its sketch, a join adds only it (#1310 ) Thanks @NOWN-DEV.	2026-10-17 08:42:17 -04:00
NOWN-DEV	40abcbc8cf	Booleans: prism cuts whose walls only touch the target are exact (#1894 ) Thanks @NOWN-DEV.	2026-10-17 08:00:06 -04:00
DuBearte	b04e0801d6	Per-command timings for script runs and batches (#1868 ) Thanks @DuBearte.	2026-10-17 07:26:20 -04:00
Mateusz Sych	d1b96100d3	Split Body: a plane lying on a face of the body splits it exactly (#1510 ) (#1897 ) Thanks @SychPL.	2026-10-17 07:21:06 -04:00
onenewcode	87d4eb55e5	fix(kernel): fillet mixed arc and line loop corners (#604 ) Thanks @onenewcode.	2026-10-17 07:06:26 -04:00
franco michetti	fbc00bb2c4	STEP import: a ball bounded only by its seam comes in whole (#1742 ) Thanks @onembyte.	2026-10-17 06:46:47 -04:00
H. Conrad	6bde126a5c	test: save the proptest seed for the grid union face that does not mesh (#1813 ) Thanks @Ian-cmd-ops.	2026-10-17 06:23:17 -04:00
NOWN-DEV	3fe6bacea0	fix: a blind cut on a long body keeps its small rounds (#1593 ) Thanks @NOWN-DEV.	2026-10-17 05:37:16 -04:00
NOWN-DEV	172782705a	fix: STEP import reads unclamped (periodic) B-splines on the seam (#1916 ) Thanks @NOWN-DEV.	2026-10-17 05:30:13 -04:00
NOWN-DEV	186555dbe9	Clearance report: overlaps, near pairs and nearest bodies (#1900 ) Thanks @NOWN-DEV.	2026-10-17 04:54:39 -04:00
Mateusz Sych	3eae8c34f6	Fillet beside a hole: the suggested largest radius fits (#324 ) (#1885 ) Thanks @SychPL.	2026-10-17 04:08:39 -04:00
NOWN-DEV	c38992fc09	fix: booleans with whole-turn round faces read from STEP are exact instead of failing (#1892 ) Thanks @NOWN-DEV.	2026-10-17 04:08:34 -04:00
NOWN-DEV	962070e955	Interference: a pin a hair off the axis of its hole gets its crescent (#1893 ) Thanks @NOWN-DEV.	2026-10-17 04:08:31 -04:00
NOWN-DEV	9a4d936b7b	fix: text cut into a large part stays on the exact 2D route (#1903 ) Thanks @NOWN-DEV.	2026-10-17 04:08:12 -04:00
Irakli Kourtis	98ce6a4ee8	Sweep guide rails and two-rail sweep (#771 ) (#1806 ) Thanks @jyviko.	2026-10-17 04:07:46 -04:00
H. Conrad	221e841d32	Kernel/refine mesh for curved meeting (#1812 ) Thanks @Ian-cmd-ops.	2026-10-17 04:07:33 -04:00
NOWN-DEV	2abf4e5a7d	STEP import: read HYPERBOLA and PARABOLA edges exactly (#1832 ) Thanks @NOWN-DEV.	2026-10-17 04:07:29 -04:00
Nathan Dane	64966bab88	Implement the reviewed UI icon system and durable review workflow (#853 ) Thanks @Nathan-Dane.	2026-10-17 04:07:16 -04:00
NOWN-DEV	c7bb64dd74	feat: a slanted or curved edge across a sheet metal bend folds to a smooth curve of few pieces (#1799 ) Thanks @NOWN-DEV.	2026-10-16 16:26:15 -04:00
H. Conrad	bb13799246	Fix/clippy option zip (#1798 ) Thanks @Ian-cmd-ops.	2026-10-16 16:26:11 -04:00
Mateusz Sych	920ea42fe1	Revolve: a partial turn's planar faces come out whole (#726 ) (#1718 ) Thanks @SychPL.	2026-10-16 15:26:10 -04:00
Mateusz Sych	31b2ddc0cf	Split Body: the face a plane split cuts takes an attachment that follows the plane (#565 ) (#1746 ) Thanks @SychPL.	2026-10-16 13:26:11 -04:00
Mateusz Sych	bf4551159e	Split Body and Combine Intersect keep their faces' sources, so sketches attach (#565 ) (#1732 ) Thanks @SychPL.	2026-10-16 11:26:17 -04:00
cronos	bba03803b7	Accelerate current-view DXF export and keep desktop exports responsive (#1738 ) Thanks @crono2250.	2026-10-16 10:26:27 -04:00
Erikas	4bacd0cae0	Fillet fit check: rounds on both sides of a wall in one feature fit as they do one after the other (#1668 ) (#1720 ) Thanks @erkexzcx.	2026-10-16 10:26:24 -04:00
Erikas	77b33efd8f	Rolling-ball blends: a strip ends on its joint where its neighbour is too short to lend sections (#1667 ) (#1702 ) Thanks @erkexzcx.	2026-10-16 09:26:23 -04:00
bherbruck	2c020dbcbc	Revert #1682 (three-axis milling) (#1715 ) Thanks @bherbruck.	2026-10-16 09:02:19 -04:00
CypherNaugh_0x	737c9358d0	Add three-axis milling with independent CAM and Fusion validation (#1682 ) Thanks @CypherNaught-0x.	2026-10-16 08:26:28 -04:00
Mateusz Sych	d84d8c3222	Joint origin: a circle given by its centre (#393 ) (#1686 ) Thanks @SychPL.	2026-10-16 08:26:14 -04:00
midasdf	bbd4f29ebb	Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642 ) Thanks @midasdf.	2026-10-16 06:26:27 -04:00
phanoob	64b0b674d2	2D prism route: the same letters cut again are one exact boolean (#1644 ) Thanks @phanoob.	2026-10-16 06:26:19 -04:00
Philipp Bischoff	3087363c44	test: three ignored tests pass again and run in CI (#679 , #562 ) (#1663 ) Thanks @PhilippBischoff0.	2026-10-16 06:26:13 -04:00
bherbruckandClaude Opus 5.5	a9beb437b3	Boolean property tests: nightly only, and the cases they found as ignored tests (#1650 ) Pushes to main skip boolean_props (random inputs); the nightly property-tests job runs it. The three shrunk cases are ignored tests with their issues (#1647, #1648, #1649), and proptest's failure file is named outright. Co-Authored-By: Claude Opus 5.5 <[email protected]>	2026-10-16 04:35:53 -04:00
midasdf	07da7f8065	Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487 ) Thanks @midasdf.	2026-10-16 03:26:20 -04:00
phanoob	9bb65b4d68	Booleans: a prism cut beside the target's other faces takes the exact 2D route in a column (#1629 ) Thanks @phanoob.	2026-10-16 03:26:13 -04:00
Irakli Kourtis	f57a62deb7	Intersection edge nodes advance along the curve at fine display qualities (#1615 ) Thanks @jyviko.	2026-10-16 03:00:56 -04:00
H. Conrad	dcffab09b1	Tessellation: point-in-trim tests skip runs of segments the ray canno… (#1309 ) Thanks @Ian-cmd-ops.	2026-10-16 01:54:29 -04:00
H. Conrad	dc6eca6830	Fix/shell saddle corners (#1316 ) Thanks @Ian-cmd-ops.	2026-10-16 01:19:42 -04:00
H. Conrad	d29ca29578	Perf/mesh collision (#1307 ) Thanks @Ian-cmd-ops.	2026-10-16 01:12:39 -04:00
JIJINBEI	3333f8a62b	Divide intersection edges from their neighbours' parameters (#1038 ) (#1412 ) Thanks @jijinbei.	2026-10-16 00:27:55 -04:00
H. Conrad	42d4ebeb16	STEP export: a merged partial cylinder keeps its cylinder (silent volume loss) (#1497 ) Thanks @Ian-cmd-ops.	2026-10-16 00:27:48 -04:00
H. Conrad	c5b7009ce3	ci: nightly property tests with more cases (#1498 ) Thanks @Ian-cmd-ops.	2026-10-16 00:13:48 -04:00
bherbruck	f98c5e350d	Shell: put shell_by_opening's doc comment back on it (#1588 ) Thanks @bherbruck.	2026-10-16 00:11:30 -04:00
Irakli Kourtis	fac3f96bdd	Patch: G1/G2 to the faces beside the loop, general and N-sided loops, points (#759 ) (#1521 ) Thanks @jyviko.	2026-10-15 23:07:24 -04:00
Colin Faulkingham	7ef78f960a	Fix perpendicular fillets after connected rounds (#1581 ) Thanks @cfaulkingham.	2026-10-15 22:40:09 -04:00
rlartot	daf618c344	Edge division: evaluate each point once (#1560 ) Thanks @rlartot.	2026-10-15 22:19:51 -04:00
phanoob	5165e428cd	Boolean: refuse a nudged result that meshes inconsistently (#1360 ) (#1455 ) The last-resort nudge's result is also measured finely; a face left a hair wide that meshes as its whole plane no longer passes as a plausible cut.	2026-10-15 22:19:28 -04:00

1 2 3 4 5 ...