Sketch Move gets a toolbar placement in Sketch > Modify and a Move/Copy tool window with X and Y distances, an angle, an optional centre point and a Create Copy flag, replacing the context-menu route that ran the command with no parameters.
The feature history can sit in a panel on the left, with folders that hold one unbroken run of features, drag and drop as one undo step, and a resizable divider. Timeline folders save under format 17.
A sketch's link to a projected edge now keeps the edge's persistent name and finds it by that name when the body changes, instead of taking whichever edge ends up nearest its point.
Adds `fit: taper` to Fillet: where a constant radius doesn't fit along a straight edge, it follows the room there as a smooth spline, down to zero where a face closes to a point. Taper to Fit is in the Fillet dialog, and the feature's warning says how far it tapered.
`SolveApp::start` now honours a command's enabled flag, so shortcuts, the command palette and the control channel can't start a disabled command, and Move is disabled while a sketch is open.
Convert to Sheet Metal now takes a solid or a shelled body by its bend edges (`bends`): the faces reached from the fixed face across those edges become the sheet, keeping the part's envelope, with the flat pattern by the rule's K-factor and radius. Other edges between sheet faces are cut open. The result works with edge flanges, cuts, Unfold/Refold, the flat pattern and DXF. A conversion without `bends` is the plate conversion as before. The optional `bends` field is noted under format 17. Fixes#647.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Extrude and Revolve from a body face take `face_body` to say whose face is meant where faces of several bodies meet flush at the picked point. Without it, an ambiguous pick now names the bodies that meet there instead of saying there is no face. Fixes#703.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Dragging a text outline now moves the whole editable text, and Move/Copy shifts or rotates it as one piece (a copy stays independently editable). Content, font, height and outline identities are kept; a drag is one undo step and Esc restores the start.
Sheet-metal cut-outs and base flange outlines drawn with ellipses, splines or text stay exact curves in the flat pattern and the unfolded body; the folded body follows them with tangent arcs within 0.001 mm (#659).
Adds render.backends, a metadata-only command that lists the render backends, their executors and profiles, with strict request resolution in the render crate (docs/render-backends.md).
A clover of same-size rectangles drawn around a shared corner was refused as over-constrained.
Constraints that remove no degree of freedom but still hold (zero residual) are now kept and shown dimmed as redundant. Conflicting ones are still refused. A redundant driving dimension is refused with "already determined by ...". Typed sizes become driven (reference) dimensions. Drawing no longer adds Horizontal/Vertical to a side that is already implied through two coincident corners. The solver reports redundant constraints using a Jacobian row-dependence test.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Two L's extruded up and down from one 2 x 2 grid now join into one solid (the planar rebuild gives each fan of faces around a pinched vertex its own vertex copy), and a pad whose end lies half past the edge of the face it stands on fuses exactly: contact faces are imprinted with each other's outline and the common faces glued away, still held to the retry guard. Face splitting handles a line crossing an edge twice; glue matches differently parametrised curves and keeps several pieces apart. Robustness seed 16 now fuses with the exact volume.
Fixes#679, fixes#674.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
An edge flange picked on an edge that cut-outs have partly removed is built along what is left of that edge (the stretch nearest the pick), so each side of a notch can get its own flange.
0.8.0 shipped format 16. Lineage names of a piece qualified by the faces around it, and sheet face names of a rim (rim.<edge>) or a bend end (rim.bend0/1), now come under format 17. Format 16 designs need no transformation, and the version stamp makes 0.8.0 ask for an update.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Home, Fit, the orbit pivot and the scene's depth range counted sketches the view doesn't draw (ones used by an extrude or revolve, ones in hidden components), so after a body moved away from its sketch Home framed the empty spot it came from. They now use the world-space bounds of what is shown now (view::visible_bounds / view::sketch_drawn, viewport::view_bounds). The pick-box cache holds its world state instead of its address. A middle-button double-click goes Home in every preset (Preferences › Navigation: Home, Fit or Off).
Fixes#689
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sheet metal rims and bend ends attach by name (<panel>:rim.<edge>, <flange>:rim.bend0/1), as do face profiles from sheet faces. A plain or counterbored Hole square to a panel is machined into the flat pattern. Boss, Lip, Rest and Snap Fit keep the body's history and name their own faces. Hole tools name their faces by the part they cut, and pattern copies as copies. A pattern's repeated fillets keep the body's history. Loft sides are named by their section curves. A piece Offset Face moved off its face's plane attaches by its own qualified name. Sides of a profile grown to overlap a flush body keep their sketch line's name, so walls a Join merged take a sketch (#681). Face sketch 75% -> 90%, offset plane 75% -> 90%, press-pull/extrude 64% -> 85% in the action matrix; baseline blessed.
Fixes#494, fixes#495, fixes#560, fixes#561, fixes#563, fixes#564, fixes#681.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Main was red since #577 and #644 landed together. Seed 16's pattern copy rests half past the block's edge; the join used to add 72 mm³ past the edge silently and is now correctly refused. The test records that; proper fusion is tracked separately.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The loading box was a full-window modal whose backdrop covered the custom title bar. It is now a light overlay under the title bar, so dragging, snapping, resizing and the window buttons keep working during open, import and recovery. The timeline rebuild shows feature N of M, and Cancel or Esc stops it at the next feature (solidcraft_doc::progress). Recovery restore now runs off the window thread too. A control or MCP doc.open or import is answered once the file is in and doesn't block frames; edits sent meanwhile wait their turn. The web build still opens in place.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
component.insert_design adds a component holding another design's solid bodies, linked to its file (stored relative to the assembly once saved). component.update_links reads the linked designs again, component.break_link keeps the bodies and forgets the file, and component.links lists them. Links are saved under format 16; an older build keeps the bodies and drops the link.
Fixes#533
An edge flange whose edge ends at an inside corner of the base now trims only the strip under its own edge, so legs and stems past that corner stay. Where the bend ends beside more of the base, the rule's bend relief (relief_width, relief_depth) is cut into the base, or a note says why it was left out.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes#396. A union that would come back as shells touching over an area is rejected and the face-in-face case is fused exactly; line and point contact stay as before.
Fixes#602. Collinear-edge merging, piece naming and the dialog preview each work in one pass instead of quadratic loops; the issue's example goes from 86 s to 5.1 s.
Fillet fit: reduce lowers the radius only where it doesn't fit: picked edges are grouped where they can limit each other (sharing a face or vertex), and each group gets the requested radius where it fits, otherwise the largest that does. Refs #293.
Co-authored-by: Iraklis Kourtis <[email protected]>
A flat face that no construction certificate names on its own now attaches by its exact history name (a new lineage face certificate): cut walls and floors, chamfer faces, each pattern or mirror copy, side walls a Join merged, and the pieces a later feature split a face into. Construction certificates still come first; a seed keeps its certificate when it is patterned. Two flush extrudes of one outline joined end to end keep their exact history in the prism boolean. Face sketch 52% -> 71%, offset plane 52% -> 71%, press-pull/extrude from face 41% -> 60% in the action matrix; baseline blessed.
Fixes#491, fixes#492, fixes#493, fixes#557.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
New view.apply command restores a named view, a standard view or any camera (view state, not an undo step); the desktop viewport follows it and the browser's Restore uses it. The MCP screenshot tool takes a named view or a camera. Un-ignores the #528 regression test. Fixes#528.
Co-authored-by: jonaswre <[email protected]>
The Flatpak app id, desktop/metainfo/MIME file names, icon name and the window's Wayland app_id / X11 class are now ai.storyteller.solidcraft, the id the ArtCraft launcher expects.
Existing Flatpak installs move over: the Pages repo marks app/ai.storyteller.solvecraft end-of-life with a rebase to the new id, so flatpak update offers the switch and Flatpak carries ~/.var/app along. A new install next to the old one copies settings and autosaves on first launch through a read-only grant on the old data folder. The metainfo declares <replaces>/<provides>, the desktop entry X-Flatpak-RenamedFrom, and AppImages drop the menu entry an older AppImage installed. deb/rpm upgrades remove the old-named files.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A save with cache: true also stores a small bounded PNG thumbnail (240 × 150, at most 256 KiB, keyed to the exact document) made from cached meshes only. Home uses it when its local picture is missing, without rebuilding the design; ordinary saves and downloads still omit it. Closes#303.
Co-authored-by: lillith <[email protected]>
A point dimensioned from linked geometry (projected, included or intersected) keeps its side when a parameter moves the link's source past it: the solve reads sides and turns from the stored state instead of from beside the moved line, both on recompute and when editing the sketch.
Co-authored-by: NOWN-DEV <[email protected]>
A design can define its own physical materials (material.create, material.edit, material.delete): name, density and an optional look. They work everywhere built-in materials do: assignment, mass properties, colours and configuration cells. Stored in user_materials, an additive field under format 16. Un-ignores the #554 regression test. Fixes#532.
Co-authored-by: jonaswre <[email protected]>
An edge flange on another flange's far edge (a return) runs along that edge from end to end, following the parent's closed or cut-back corner, and returns of one feature close toward each other at convex base corners, mitred the rule's gap apart. Bends stop square where the mitre allows. Fixes#593.
Co-authored-by: NOWN-DEV <[email protected]>
The bend table, flat pattern and DXF list a bend only where its centre line has material: a bend that cut-outs (or pockets that together go through the sheet) shorten keeps what is left, and one they split gets a row per piece, all with the bend's number.
Co-authored-by: NOWN-DEV <[email protected]>
MCP batch takes verbose: false for compact replies: feature steps leave out the full body list and sketch steps the ids they repeat outside created. Feature replies now also list changed_bodies and removed_bodies next to created_bodies, so a compact reply still shows every effect of a step. Un-ignores the #530 regression test. Fixes#530.
Co-authored-by: jonaswre <[email protected]>
A Box cut, or a Cylinder cut whose axis is the sheet's normal, machines a sheet metal body like the extrude cut of its footprint: through the sheet it's a cut-out (a cylinder an exact round one in the flat pattern and DXF), part way it's a pocket. Primitives at other angles or across a bend are still refused. Un-ignores the #541 regression test. Fixes#541.
Co-authored-by: jonaswre <[email protected]>
Faces that a sheet fold or unfold moves keep their names: points on a moved panel are taken back through the panel they lie on to where the sheet held them before the feature, and named from the faces there. Un-ignores the #535 regression test. Fixes#535.
Co-authored-by: jonaswre <[email protected]>
Tapered extrudes accept profiles that mix lines and tangent arcs (slots, D-profiles, rounded rectangles): each arc keeps its centre and angles and its radius moves with the taper, so its side stays an exact cone; lines are offset and mitred. An arc meeting another edge at a corner is still refused. Un-ignores the #546 regression test. Fixes#546.
Co-authored-by: jonaswre <[email protected]>
Draft extends the picked faces to every face on the same surface, so one pick on a cylinder's side (stored as two halves) drafts the whole round wall into a frustum. Un-ignores the #547 regression test and adds a kernel test for a round hole. Fixes#547.
Co-authored-by: jonaswre <[email protected]>
An extrude cut or join only extends its tool past an end that lies on a target face, and by less than half the way to the next face level, so a tool can no longer cut through a thin floor beyond an end that touches no face. Un-ignores the #545 and #544 regression tests. Fixes#545.
Co-authored-by: jonaswre <[email protected]>
sheet.fold tests its fixed point against the whole sheet body, so a point far above or below the sheet is refused atomically, while a point on any face (including a flange's leg) still works. A stored fold whose point ends up in the air recomputes, keeps its side and warns. Un-ignores the #371 regression test. Fixes#371.
Co-authored-by: jonaswre <[email protected]>
