A PR that saves something new adds crates/doc/src/format/pending/<name>.rs (a note, and an upgrade step if older designs must be rewritten). The build writes the next format number while changes are pending and lists them in format_pending; scripts/fold-format-pending.sh fixes them as v<N>/ at release time. Formats 23 and 24 move into v23/ and v24/.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
An Edge Flange feature can set the shape and size of the relief at the corners its flanges make, in place of the sheet metal rule's. Design format 24.
Co-authored-by: NOWN-DEV <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Thin extrude caps are certified by the curves the wall follows, so a sketch attached to a cap survives switching between solid and thin (#1519).
Co-Authored-By: Philipp Bischoff <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
Motion links can carry a coupling (gear pair, rack and pinion, screw) whose ratio follows radii, picked round faces or pitch. Design format 23.
Co-authored-by: SychPL <[email protected]>
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
The product preview asked the viewport executor for the full physical
viewport, so a maximised 4K window (~8 MP) was refused against the 4 MP
limit on every frame. The preview now draws at the largest size of the
same aspect the executor admits (RenderLimits::fit, scratch included)
and filters it up into the viewport through the existing offscreen
blit. Viewports within the limits still draw at full size.
PNG setups past the image limits now say what the limits are and the
largest size at that aspect, and the image panel offers to use it.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes#1362.
Co-authored-by: NOWN-DEV <[email protected]>
The continuity core (kernel bridge: Hermite control rows reproducing a support surface's position, tangent, curvature and change of curvature, G0 to G3), surface.blend between two edge chains (#764), and a crown for fitted patches. Existing patches and fillets are unchanged by default (crown 0 is the plain patch bit for bit). SurfaceBlend and Patch.crown are noted under format 22.
Material-card validation now names the exact condition fields missing for each property (missing_condition_fields), alongside the existing unspecified_conditions.
Co-authored-by: 0xlillith <[email protected]>
joint.motion_link offset is read in the linked value's units (degrees or mm, or an expression); links are still stored in radians, so saved designs open unchanged. A new joint whose values fall outside its limits starts at the nearer limit, stores it, and says so in warnings. Loop dof also counts at a nearby pose, so a part at a dead point of its loop keeps its mobility. The mechanisms skill is updated to match.
"2,5 mm" is 2.5 mm; inside a function's parentheses the comma still separates the arguments. Noted under design format 22: an expression typed with a decimal comma is saved as typed, so 0.12.0 asks for an update instead of failing to evaluate it.
* Imports become components: a STEP assembly's tree as nested components (#1386)
Every imported file (STEP, IGES, 3MF, STL, OBJ: inserted, dropped, opened as a
design, or file.insert_step / file.insert_mesh / doc.open from scripts, the CLI
and MCP) now comes in as a new component named after the file, with its Import
feature inside it. A STEP assembly's products become nested components; a part
placed more than once is one component with an occurrence per placement, and
the Import feature skips the file's later copies (`skip`, format 21 note). The
contents are held as one rigid group (rigid joints, glyphs hidden); moving an
inner part is refused until component.unlock ("Unlock Contents") releases it.
Y up turns the import's component. Replies report component, component_name
and occurrence. Undo is one step; designs with loose imports are unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Keep an import's rigid group hidden when the window loads the file in the background
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Import instances' skip list is format 22: format 21 ships in 0.12.0
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Catalog entries for Unlock Contents
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
* View-dependent display refinement: bodies seen up close are drawn from finer display plans (#1320)
Each frame the viewport works out every shown body's screen-space error (the display
quality's chord tolerance in pixels where the body is nearest the eye) and picks a
refinement step past the chosen display quality, each halving the chord, with hysteresis.
Steps are planned off the UI thread and swapped in when ready, within a triangle budget
and a cache size. Faces (GPU plan or CPU mesh), edges, silhouettes and highlights of a
refined body all come from the refined plan, so a highlight stays on the drawn triangles.
Planned bodies are chunked by content on the GPU, so a refinement re-evaluates only its
own chunk. Display only: the reference mesh, the B-rep and exports never change.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Display refinement: only collect finished plans while the view stands still, time the choice, keep the web planning one step a frame
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Format
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Keep the Display quality note as it was (the longer one pushed the Colour vision list off the Graphics page)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Converted sheets take the rule's corner relief between walls and its bend relief where a bend ends beside more of the fixed face, and a wall on part of an edge bends only where it stands. Noted under format 21; nothing new is saved.
Fixes#1187. New parameters.move {name, before|after} reorders user parameters (the design's own params order, so it is saved with no format change, and undoable); the Parameters dialog's user rows get up/down buttons. Label in every catalog. I merged main in. Checked on main + this branch: cargo check --workspace, the engine parameters tests, the UI parameter_order test, and docs/features.md regenerates unchanged.
NOWN-DEV