A sketch text's height, place (x and y) and angle can each be an expression over the design's parameters, and the text follows parameter changes, undo and reopening. Closes#1362.
Co-authored-by: NOWN-DEV <[email protected]>
A dimension to a line, or between two parallel lines, drew its extension lines from the
measured end point and its foot on the other line, so they ran the whole length of the
lines to wherever that end happened to be. They now start from the nearest point of each
line to the dimension line, and disappear where the dimension line already crosses it.
Fixes#1361
Co-authored-by: Claude Opus 5.5 <[email protected]>
Rectangular and circular sketch patterns stay linked to their source: editing the pattern's count, spacing or the source geometry updates the copies, and the copies keep their point and radius relations. Patterns are saved under format 20; older designs keep their independent copies.
doc.open and the STEP/mesh imports run on the file loader's worker with the request's path scope, and a font named by file path in a design is checked against the scope before it is read.
Thin Extrude builds walls of a set thickness along sketch curves, open chains and closed loops, with the wall centred, inside, outside or on both sides at two thicknesses. Saved under format 20 (thin on an Extrude); an extrude without thin saves as before. Closes#721.
Sketch Mirror, rectangular and circular Pattern, and Offset now show a green live preview that follows the selection and settings; OK commits, Cancel leaves the sketch unchanged. The shared dialogs show the current selection step and source counts, sources can be toggled with Ctrl/Cmd-click, cleared and reselected.
Offsets keep editable driving distance dimensions (One Side, Two Sides, Symmetric) that update the derived curves without moving the source, with undo/redo and save/reopen. Format 19: older files keep their fixed offsets.
New dialog labels in en, zh, ja, de and ko.
Fixes#696. Fixes#517.
A sketch text gets an optional style: bold and italic faces (a slanted fallback for italic), left/center/right alignment, letter and line spacing, and a path curve of the same sketch for the baseline to follow (reverse takes the other side). Edit Text gets B/I toggles, alignment, spacing fields and a Path chip, all live. The style is saved only when not plain and is noted under format 18.
Agent tool calls (MCP, and bridged control requests carrying allow_paths) reach files only in the open design's folder (strictly inside home or the temporary folder, not in a hidden folder, and never its hidden files), the app's recovery folder, the server's private scratch folder and each --allow-path; --allow-any-path lifts the limit. Paths are resolved first, so .. and symlinks that lead out (including a save through a link, #845) are refused. On Windows, UNC, device, NT, verbatim non-drive, drive-relative, alternate-stream, reserved-device and 8.3 short-name paths are refused before any file system call, and the resolved path must be on a local drive. doc.recovery_discard and doc.recover {discard} delete only real recovery entries. Docs: mcp.md, control-protocol.md, README.
A clover of same-size rectangles drawn around a shared corner was refused as over-constrained.
Constraints that remove no degree of freedom but still hold (zero residual) are now kept and shown dimmed as redundant. Conflicting ones are still refused. A redundant driving dimension is refused with "already determined by ...". Typed sizes become driven (reference) dimensions. Drawing no longer adds Horizontal/Vertical to a side that is already implied through two coincident corners. The solver reports redundant constraints using a Jacobian row-dependence test.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A point dimensioned from linked geometry (projected, included or intersected) keeps its side when a parameter moves the link's source past it: the solve reads sides and turns from the stored state instead of from beside the moved line, both on recompute and when editing the sketch.
Co-authored-by: NOWN-DEV <[email protected]>
sketch.text and sketch.edit_text take an optional font: an installed family or a .ttf/.otf/.ttc file. Edit Text gets a Font field. The font is kept with the text under format 16; no fonts are bundled, and the font search is bounded.
Fixes#513
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Text outlines count as drawn geometry when picking profiles, and "all profiles" leaves out the counters of letters (the holes of A, B, 8), so text extrudes as letters with their holes whether or not other curves are drawn next to it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
`sketch.constraint.symmetry` (line), `parallel`, `perpendicular`,
`collinear`, `tangent` and `coincident` (point on curve) now take `x` /
`y` for the sketch's own axes, matching what `solid.revolve` means by
lowercase x|y. A real curve with that id still wins.
An axis becomes a linked construction line on it: a new
`LinkSource::SketchAxis` resolved in sketch coordinates, so it stays on
the sketch's axis on any plane, is shared by every constraint on that
axis, is left out of profiles and is reported in `created`. Equal,
concentric, midpoint and horizontal/vertical keep refusing axes, since
the axis line's finite length or fixed direction would make them
meaningless.
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
Co-authored-by: Claude Opus 5.5 <[email protected]>
* feat(sketch): constructive solving ahead of the numeric solver
Part 1 of splitting #251: the sketch crate only. A graph-constructive front
end (Owen 1991; Fudos & Hoffmann 1997) places what it can by ruler-and-compass
loci and cluster decomposition, Levenberg-Marquardt finishes and verifies the
rest, and the rank analysis stays authoritative for degrees of freedom. Solves
can follow a reference (the previous solution), so edits and drags keep their
branch instead of flipping.
New API: solve_with (hold, reference, analysis, budget) and
solve_after_value_edit; solve and solve_holding keep their signatures as
wrappers, so no caller changes here.
When the seed moves an arc's centre, the arc's unconstructed ends start carried
along (the arc translates) instead of left behind for LM to turn; found by the
reference test 20-slot-constrained.
Refs #203
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* feat(doc): keep a sketch's solved state across value edits
Part 2 of splitting #251 (builds on part 1, the sketch crate):
- Sketch edits solve for the document's values continuing from the stored
solved state (Document::solve_sketch), so a dimension edit keeps the
sketch's branch instead of re-solving from scratch.
- A value edit (parameters, a configuration, the units) that would make a
sketch that solved before fail or turn over is refused with the
conflicting constraints named; otherwise the solved sketches are written
back into the document (Model::adopt_solved_sketches), which changes what
saved designs store.
- Later features are keyed by a sketch's solved geometry (to a 1e-6 mm
quantum), so setting a value back reuses their earlier results.
- Solved sketches in a model state are shared (Arc) between states.
Refs #203
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* feat(sketch): live drag that keeps its solution, ended by sketch.drag_end
Part 3 of splitting #251 (builds on part 2):
- sketch.drag follows a long move in short held steps, so the geometry keeps
its branch, and reports how far it got (reached, at).
- live: true runs one frame of an interactive drag: the sketch is solved
once and shown, later features keep their last result (marked stale)
until sketch.drag_end or any command that reads the model evaluates it
(CommandSpec::live, reads_model, doc_only).
- sketch.drag_end adds the constraint the drag let go on and evaluates the
model once.
- Undo and redo evaluate a new document once (execute does) instead of
twice.
- The viewport drives drags through live frames and drag_end; dimension
text drags start only off sketch geometry.
Refs #203
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Nothing on the load path checked a sketch's size, and every sketch in the
timeline is solved when a design opens. The solver sizes its dense matrices by
the connected component, so a 30 MB file with 200,000 chained points asked the
allocator for terabytes and the process aborted, which no panic guard can
intercept.
Reject an oversized sketch while the design is still raw JSON, so the typed
arrays are never built, and refuse a connected component with more variables
than fits in a bounded matrix: that component now reports a failed solve and
leaves its geometry alone. 10,000 chained points went from 9.6 GB and 25
seconds to a failed solve in well under a second.
Fixes#145
Co-Authored-By: Claude Opus 5 <[email protected]>
(cherry picked from commit 04abbf95c26f68c7d0a126ed9e2827049f593361)
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.
Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.
Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
Karl Von Richter