The Flatpak app id, desktop/metainfo/MIME file names, icon name and the window's Wayland app_id / X11 class are now ai.storyteller.solidcraft, the id the ArtCraft launcher expects.
Existing Flatpak installs move over: the Pages repo marks app/ai.storyteller.solvecraft end-of-life with a rebase to the new id, so flatpak update offers the switch and Flatpak carries ~/.var/app along. A new install next to the old one copies settings and autosaves on first launch through a read-only grant on the old data folder. The metainfo declares <replaces>/<provides>, the desktop entry X-Flatpak-RenamedFrom, and AppImages drop the menu entry an older AppImage installed. deb/rpm upgrades remove the old-named files.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A save with cache: true also stores a small bounded PNG thumbnail (240 × 150, at most 256 KiB, keyed to the exact document) made from cached meshes only. Home uses it when its local picture is missing, without rebuilding the design; ordinary saves and downloads still omit it. Closes#303.
Co-authored-by: lillith <[email protected]>
A design can define its own physical materials (material.create, material.edit, material.delete): name, density and an optional look. They work everywhere built-in materials do: assignment, mass properties, colours and configuration cells. Stored in user_materials, an additive field under format 16. Un-ignores the #554 regression test. Fixes#532.
Co-authored-by: jonaswre <[email protected]>
An edge flange on another flange's far edge (a return) runs along that edge from end to end, following the parent's closed or cut-back corner, and returns of one feature close toward each other at convex base corners, mitred the rule's gap apart. Bends stop square where the mitre allows. Fixes#593.
Co-authored-by: NOWN-DEV <[email protected]>
The bend table, flat pattern and DXF list a bend only where its centre line has material: a bend that cut-outs (or pockets that together go through the sheet) shorten keeps what is left, and one they split gets a row per piece, all with the bend's number.
Co-authored-by: NOWN-DEV <[email protected]>
MCP batch takes verbose: false for compact replies: feature steps leave out the full body list and sketch steps the ids they repeat outside created. Feature replies now also list changed_bodies and removed_bodies next to created_bodies, so a compact reply still shows every effect of a step. Un-ignores the #530 regression test. Fixes#530.
Co-authored-by: jonaswre <[email protected]>
A Box cut, or a Cylinder cut whose axis is the sheet's normal, machines a sheet metal body like the extrude cut of its footprint: through the sheet it's a cut-out (a cylinder an exact round one in the flat pattern and DXF), part way it's a pocket. Primitives at other angles or across a bend are still refused. Un-ignores the #541 regression test. Fixes#541.
Co-authored-by: jonaswre <[email protected]>
Inscribed, circumscribed and edge polygon tools preview their actual outline (side count and orientation) while drawing, with the current line type, instead of only the support circle. Preview work is bounded. Fixes#520.
Co-authored-by: lillith <[email protected]>
sheet.flat_pattern reports every cut-out exactly in a new cutout_shapes list, parallel to cutouts: a round hole as a circle, other cut-outs as their lines, arcs and (for other curves) polylines. Pockets get the same. The DXF writer and the JSON share one circle test. Un-ignores the #542 regression test. Fixes#542.
Co-authored-by: jonaswre <[email protected]>
A scheduled/manual CI job scans locked dependencies for advisories, bans and unknown sources with cargo-deny 0.20.2 (never on pull requests, contents: read, no secrets). The first scan flagged quick-xml 0.38.4 (RUSTSEC-2026-0194/0195), so the workspace moves to quick-xml 0.41. Fixes#468.
Co-authored-by: lillith <[email protected]>
Hidden bodies, occurrence placements, sketches and origin items are saved with the design and come back when it is reopened. Visibility is still not an undo step, but hiding or showing something now counts as an unsaved change. Additive field under format 16. Fixes#531.
Co-authored-by: jonaswre <[email protected]>
Construction (X) keeps the active sketch tool, its picked points and inline values while switching line type, and drawing previews and hover show the same dashed pattern as committed construction and centre lines. Fixes#584 and #581.
Co-authored-by: lillith <[email protected]>
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.
apps/solidcraft-cli/tests/action_matrix.rs tries sketch, offset/angle/mid planes, press pull, extrude from a face, hole, draft, shell, fillet, chamfer, axes, points, planes, projection, move, copy, mirror and pattern on the final bodies of 104 designs (the old design files, the examples, the 76 reference recipes, the enclosure demos, the Pi case built through the UI, eight typical parts), through the commands and picks the desktop sends, each design in its own process, with an edit round on a sample of passes. tests/action_matrix/baseline.json is a ratchet: an action that passed there and fails now fails the test; newly passing ones are reported for cargo xtask action-matrix --bless. Every CI run checks a fixed sample; the nightly Action matrix job runs the whole matrix in four parts. 30,567 of 35,576 actions pass (85.9%); results and causes in docs/action-matrix.md, one ignored reproduction per open cause (#556-#568).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Fixes#374. Feature replies gain created_bodies: the bodies the new feature made, apart from the ones it changed or that were already there. Documented in the execute tool description and docs/mcp.md.
Fixes#478. Desktop Ctrl/Cmd +/-/0 now update the saved UI scale instead of flashing back, and the Preferences scale slider applies the new layout on release (range 50-250%, matching the preference validation). Addresses the drag jitter in #272.
sketch.text and sketch.edit_text take an optional font: an installed family or a .ttf/.otf/.ttc file. Edit Text gets a Font field. The font is kept with the text under format 16; no fonts are bundled, and the font search is bounded.
Fixes#513
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sheet Metal Rules get a Corner Relief Shape (notch, round or rectangular), sized by the rule's corner relief, cut where two bends meet at a corner of the base. Notch, the default, keeps existing designs as they were. File format 16.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A SolidCraft-owned portable B-rep schema (geometry schema 2 with analytic curves and surfaces, explicit frames and ranges, fitted intersection curves) and a versioned body envelope (SCBREP03) with its own metadata records, a bounded binary codec, a validator with resource budgets, and an adapter that refuses what it can't convert exactly. Pinned by a box-and-fillet golden fixture. Not yet written by application saves. Refs #303.
A hole positioned on a face now follows that face along the hole's own axis instead of sliding to the face's nearest point. When the face no longer reaches the position, the hole stays where it was placed and the feature says so.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A profile traced over a face sketch's projected boundary left the extrude's caps and sides without an exact planar source, so a sketch or offset plane on the new top face was refused. The drawn curve is now the edge's source where it covers a projection. Clearer fixed-plane message; regression tests in the engine, UI harness and design corpus, plus a corpus-wide flat-face attachment check (known gaps under #491-#495).
Fixes#489
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Hold the left button still (long-press on touch) or right-click › Select Other… to list everything under the cursor: sketch points and curves ("Line 3", "Point (arc 2 centre)"), vertices, edges, faces, bodies, profiles, planes and axes, filtered like a click and by the open dialog's active input. Hovering a row lights it up; clicking selects it (Shift/Ctrl add) or feeds the dialog. A repeat click on the same spot with nothing changed selects the next thing there; a double-click keeps its own actions.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Replace the 0.2.1 enclosure recording with a 40 s take of the current desktop UI building a Raspberry Pi 4 case: a sketch dimensioned with the board's parameters, extrude, fillets and shell, an M2.5 standoff patterned on the 58 x 49 mm hole rectangle, port cut-outs, floor vents, a colour, then height 24 -> 32 mm in Parameters. The demo script gains the pi story (now the default).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A sketch on a flat face of a sheet metal body was refused ("this face has no exact planar
source"), so the only way was a plane frozen in space. When the sheet changes (a flange's
angle, the thickness), the frozen sketch stays behind: a cut from it fails on the slanted
flange or leaves a blind pocket in the thicker sheet.
`sketch.create` with a face of a sheet metal body now attaches the sketch to the panel the
face belongs to. It keeps the face's name, `sheet:<body>:<panel>:<top|bottom>` (the panel is
the base or a flange's feature tag), and takes the panel's exact plane from its flat region
and fold each time the model is evaluated, so the sketch follows the sheet through parameter
changes, unfold and refold. Its coordinates are the flat pattern's (the bottom face's y
mirrored). A face that is gone is reported as a lost attachment, never replaced by the
nearest face. The attachment follows a renamed or copied body, shows as `sheet_face` in the
command result and as its own status in Redefine Sketch Plane. `fixed: true` still freezes.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Sketch on a cylinder primitive's caps (#420)
A solid.cylinder's caps carried no construction certificate, so a sketch
on its top or bottom was refused unless fixed:true (#420's crossed
cylinders, built from primitives).
- kernel: FaceSource::CylinderCap { producer, high, plane };
Body::with_cylinder_certificate turns a cylinder's two extrude caps into
certified caps. kernel::cylinder's output is unchanged for its other
callers.
- doc: FaceCertificate::CylinderCap { high }, named F<id>:top / F<id>:bottom
as the cylinder's face names already are; New Body and Join cylinders
are certified, shells carry it as their planar source.
- format 15: designs can store the new certificate kind; version 14
designs need no change, and older builds ask for an update instead of
meeting an unknown kind.
Tests: top and bottom attachments follow a height and base edit and a
reopen; crossed joined cylinders keep both caps attachable; a shelled
cylinder's floor keeps its cap identity; malformed certificate JSON is
refused.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
* Format 15 also covers sketch_axis links (#448)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Project, Intersect, Include 3D Geometry and Text resolved the active sketch's
plane without the model, so on a construction plane that is built from geometry
(perpendicular to a plane through a sketch line, through three points, midway
between two faces, tangent, along a path) they stopped with "this plane is built
from the model: evaluate first". Evaluation resolves the same plane against the
model before the sketch, in its component's frame; the sketch commands now do
the same, in one place, for adding a link, refreshing the links on an edit,
snapping a point onto an edge and the internal face profiles.
Tests: a sketch on a plane through a sloped sketch line projects a point and a
line of that sketch, follows a parameter that tilts the plane (also after reopen
and after another edit), holds text, intersects a body and includes an edge; the
same on a three-point plane and a midplane.
Co-authored-by: Claude Opus 5.5 <[email protected]>
A left press with Ctrl (or Cmd) held, no Shift or Alt, on empty space orbits
for that press, unless the preset binds Ctrl+left itself. It only orbits
once the pointer moves: a Ctrl+click still adds to the selection, and
Ctrl+drag on sketch geometry still drags it without snapping. Works with a
tool active, without adding geometry. Ctrl+box selection from empty space
becomes the orbit; Shift+box selection still adds.
Preferences › Navigation and the UI tour mention it. Test drives every
preset through real pointer events.
Claude-Session: https://claude.ai/code/session_01YDDPmNdRoBgkHcLeUDKVfb
Co-authored-by: Claude Opus 5.5 <[email protected]>
* docs: add OpenGraph and Twitter card tags to the book and web app
Links to the docs site and the browser app now unfurl with a preview card.
The book gets the tags through theme/head.hbs (og:title follows the page
title); the web app's index.html carries its own, pointing at /app/. Both
use the social preview image, now served from the book at /solidcraft/og.png.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
* docs: list the social preview image in ATTRIBUTION.md
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01HWLPLy7ug7URSK5WybjRNa
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
One edge flange feature gave all its flanges one height and one angle. A
part whose flanges lean differently took one feature per angle, and
flanges of separate features don't close toward each other, so its
corners stayed open.
- sheet.flange (edge): an entry of `edges` is a point [x, y, z] as before,
or {point, angle?, height?} whose angle and height (expressions, checked
like the feature's) replace the feature's for that edge. Bad input is
refused with the edge named. Before, the object form was read for its
point and the rest was ignored without a word.
- The feature stores its edges as FlangeEdge. An edge without values of
its own is written as the plain point it always was, so designs without
them are read and written as before; an unknown key in an edge is
refused, not dropped.
- The edges' values are feature inputs of their own (Edge angle, Edge
height, after the feature's), so parameters, renames and
parameters.change reach them. timeline.edit names the edges again when
it changes them, so each value stays with its edge.
- SheetBody::add_flanges_each trims every edge by its own setback and
adds the flanges. The corners between them close as between equal
flanges: the closing already works from the two flanges it joins (each
one's fold and leg), so the flat pattern follows by hand from the
angles, the heights and the rule (the tests derive it).
- The Flange dialog shows a row per picked edge with an angle and a
height box (empty: the dialog's value) once more than one edge is
picked, and brings them back on Edit Feature.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Edge flanges meeting at a corner of the base were closed only at exactly
90°; at any other angle they stayed open (a V at 72°) and the rule's gap
was not used.
The flanges of one feature now close at any convex base corner and any
bend angle: each panel end is cut square to the sheet on a line in the
flat (slanted off 90°, stored as ext plus a new per-end slope) so the
edges nearest each other, on the inner faces, run parallel the rule's gap
apart about the plane bisecting the inner faces. The construction reads
the two flanges' own angles, so it holds for unequal ones as well. At 90°
it is the extension the old code gave (reference case 69-sm-tray is
unchanged). A corner that can't close (a gap under 0.01 mm, flanges
bending opposite ways, ends that would overlap in the flat pattern) stays
open, and the flange feature reports a warning that says where and why.
A flange of a later feature leaves the corner as it was (reference case
75-sm-bracket-holes: the earlier flange keeps its length).
Tested at 72° and 90° against a hand derivation, on a trapezoid, and
every 5° from 45° to 135° on a rectangle and a trapezoid (gap exact, one
flat region without hairline edges, one valid shell holding the flat
material).
Co-authored-by: Claude Opus 5.5 <[email protected]>
A parameter change can break a feature without failing the command that
made it; parameters.change reports it only in its `errors`. `run` then
exited 0 and exported the bodies as they were before the failing feature:
a shrunk sheet-metal tray whose unfold failed came out folded, without
the holes and cut-outs made after the unfold.
`run` now checks the evaluated timeline before writing anything. Any
feature with an error fails the run with status 1, lists the failing
features on stderr and writes none of the --out and --save files, as a
failing command already does. --allow-errors writes them anyway. `eval`
is unchanged and still reports the errors in its timeline.
Co-authored-by: Claude Opus 5.5 <[email protected]>
* Snap package: build, test and attach a strict snap to every release
packaging/linux/snap/snapcraft.yaml (core24, strict, gnome extension) repackages
the release's Linux tarball like the Flatpak does. The release workflow builds it
for amd64 and arm64, installs it with --dangerous, models a box in the confined
app on headless X11 and Wayland, and attaches solidcraft-<version>-linux-<arch>.snap
plus the version-less copy. When SNAPCRAFT_STORE_CREDENTIALS is set, nightlies go
to edge and release drafts to candidate, and snap-store.yml promotes candidate to
stable when a release is published. The README gets a Snap badge and install line.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
* snap smoke: stop the app's whole process group, refuse a busy control port
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
* snap smoke: quit the app cleanly between backends
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Badges and one-line instructions for Windows, macOS, Linux and the web app,
right after the tagline and demo. The links use releases/latest/download with
version-less file names, which release.yml now attaches (and checksums)
alongside the versioned installers. The Flatpak note and the name/compatibility
section move into the book's Getting started page.
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: Claude Opus 5.5 <[email protected]>
Every panic (in a command, in the kernel, anywhere else) and every unclean
exit (abort, stack overflow, kill) leaves a report in a local crash folder:
message, file:line, a trimmed backtrace, version, commit, system and renderer,
the command and recent commands, and when possible the design and replay.json
that reproduce it (solvecraft-cli crashes replay <id>).
- Cost: nothing until the app installs the hook (tests, CLI and web never
do); then one small journal line per top-level command of the design on
screen, taken back with a truncate when the command changed nothing.
- Unclean exits: each run holds a lock on its journal; a journal nobody holds
at the next start belongs to an app that died. Autosaves restart the
journal from the autosaved design.
- Bounded: a crash's signature (place + message, numbers ignored) is counted,
not rewritten; at most 5 new reports per run, 20 reports, 50 MB, 90 days;
recovered kernel panics are pruned first.
- Agents: diagnostics.crash_reports / crash_report / crash_reports.clear
commands, the MCP crash_reports tool, solvecraft-cli crashes, solvecraft
--crash-log; diagnostics.crash_test (with SOLVECRAFT_CRASH_TEST) checks it.
- People: the Crash Reports window opens after a crash (Help > Crash
Reports…) with a reviewed issue draft per report; nothing is sent.
- Release builds keep line tables for file:line in backtraces.
Tests: child processes that really panic in a command, in the kernel, on a
thread, and abort; dedup counts, limits, hostile folders, journal parsing,
the UI window and draft, the MCP tool. docs/crash-reports.md.
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: bherbruck <[email protected]>
Two-finger scroll pans the model instead of zooming; pinch-to-zoom
zooms toward the cursor and honors reverse zoom. Trackpad scrolls
arrive bracketed (Start..End, momentum included) while mouse wheels
send bare moves, so phases tell them apart: bracketed gestures pan,
bare vertical input zooms and bare horizontal input pans (thumb wheel).
Mouse line/page input keeps zooming, and ui.scroll now sends line
input so scripts and agents are unaffected. New Navigation preference
'Two-finger scroll pans' (default on) restores the old behaviour
when off.
* Release under the SolidCraft name: binaries, assets and installers
The desktop binary is now `solidcraft` and the CLI `solidcraft-cli` (the two app packages
are renamed; their folders move with the rest of the rename later). Every release asset is
named solidcraft-<ver>-… / SolidCraft-<ver>-windows-x64.exe, and the installers show the
SolidCraft product name.
Kept so existing installs keep updating (docs/compatibility.md):
- `solvecraft-cli` alias binary in every package, forwarding to solidcraft-cli with a
deprecation note on stderr (tests/legacy_alias.rs).
- Linux app ID ai.storyteller.solvecraft (Flatpak ID, desktop entry, Wayland app_id).
- MSI UpgradeCode, so the MSI upgrades in place.
- deb Replaces/Conflicts/Provides and rpm Obsoletes/Provides solvecraft.
- An old-named .zsync copy so earlier AppImages find updates; a legacy .flatpakrepo copy.
- .solvecraft file associations; SOLVECRAFT_* fallbacks in the packaging scripts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
* MSI: register the legacy .solvecraft extension without a duplicate open verb
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Sketch Dimension refused a dimension the sketch couldn't take, with
"that dimension would over-constrain the sketch; add it as a driven
(reference) dimension with driven: true", which the tool gave no way to
do. It now places it as a driven dimension instead: while placing, the
preview shows it in parentheses in the driven colour, and the click adds
it at once (it has no parameter and no value to edit), with a status line
saying why. Other refusals, such as an unsupported pick, are reported as
before, since the driven dimension is refused too.
Refs #320
Co-authored-by: Vitali M. <[email protected]>
The guard that refuses machining through bends sewed every bend zone and
nonparallel panel into one solid. Two bends meeting at an open corner relief
share only an edge, so that sew failed with "nonmanifold edge contact" and any
cut on the base was refused. Sew and test each piece on its own instead.
Reference case 75-sm-bracket-holes now passes; its known_failure mark is removed.
Fixes#296
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: Claude Opus 5.5 <[email protected]>
Between two points, or on a line, that don't line up with an axis, the
Sketch Dimension tool only offered the distance between them: an auto
dimension ignored where its text went. Now the placement picks what it
measures: across from the two (between the perpendiculars through them)
the distance between them, as before; past that, above or below them the
horizontal distance, beside them the vertical one. With no text, an
explicit type, or two ends already on an axis, nothing changes.
The tool previews the dimension from the cursor, so the choice follows
the pointer while placing it.
Fixes#257
Co-authored-by: Vitali M. <[email protected]>
Co-authored-by: bherbruck <[email protected]>
Co-authored-by: Claude Opus 5.5 <[email protected]>
* feat(sketch): constructive solving ahead of the numeric solver
Part 1 of splitting #251: the sketch crate only. A graph-constructive front
end (Owen 1991; Fudos & Hoffmann 1997) places what it can by ruler-and-compass
loci and cluster decomposition, Levenberg-Marquardt finishes and verifies the
rest, and the rank analysis stays authoritative for degrees of freedom. Solves
can follow a reference (the previous solution), so edits and drags keep their
branch instead of flipping.
New API: solve_with (hold, reference, analysis, budget) and
solve_after_value_edit; solve and solve_holding keep their signatures as
wrappers, so no caller changes here.
When the seed moves an arc's centre, the arc's unconstructed ends start carried
along (the arc translates) instead of left behind for LM to turn; found by the
reference test 20-slot-constrained.
Refs #203
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* feat(doc): keep a sketch's solved state across value edits
Part 2 of splitting #251 (builds on part 1, the sketch crate):
- Sketch edits solve for the document's values continuing from the stored
solved state (Document::solve_sketch), so a dimension edit keeps the
sketch's branch instead of re-solving from scratch.
- A value edit (parameters, a configuration, the units) that would make a
sketch that solved before fail or turn over is refused with the
conflicting constraints named; otherwise the solved sketches are written
back into the document (Model::adopt_solved_sketches), which changes what
saved designs store.
- Later features are keyed by a sketch's solved geometry (to a 1e-6 mm
quantum), so setting a value back reuses their earlier results.
- Solved sketches in a model state are shared (Arc) between states.
Refs #203
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
* feat(sketch): live drag that keeps its solution, ended by sketch.drag_end
Part 3 of splitting #251 (builds on part 2):
- sketch.drag follows a long move in short held steps, so the geometry keeps
its branch, and reports how far it got (reached, at).
- live: true runs one frame of an interactive drag: the sketch is solved
once and shown, later features keep their last result (marked stale)
until sketch.drag_end or any command that reads the model evaluates it
(CommandSpec::live, reads_model, doc_only).
- sketch.drag_end adds the constraint the drag let go on and evaluates the
model once.
- Undo and redo evaluate a new document once (execute does) instead of
twice.
- The viewport drives drags through live frames and drag_end; dimension
text drags start only off sketch geometry.
Refs #203
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Pieces a cut splits a body into are named after their faces since names
follow history (lineage::order_lumps), so they keep their body names when
an upstream edit moves the cut. The kernel's shell order named them
before, and the two orders can differ: a slot along X through a 40x30x10
block swaps Body1 and Body1 (1). A design saved by an older build stores
body names meaning the old order (fillet and chamfer bodies, targets,
participants, materials, appearances, joints), so it would act on the
other piece.
Each feature now says which order names its pieces
(Feature::shell_piece_order). The v13 to v14 step sets it on every saved
feature, so an older design evaluates as it was saved; features made from
now on, in new or old designs, name their pieces after their faces.
The corpus gains split-body-pieces, saved by v0.3.2: a fillet, a chamfer
and an appearance refer to the two pieces by body name. Without the
setting the two pieces swap names (the corpus test fails); with it they
stay as saved. Migration tests that compared an upgraded design with the
original now expect the setting on its features.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
