bherbruck and Claude Opus 5.5
f40356a74f
Never lose work: atomic saves (temporary file, flush, rename) keeping the replaced version as <file>.bak; autosave of unsaved changes into a recovery folder (every 5 min, preference autosave_minutes, and after commands over 1.5 s; skipped when unchanged; entries locked while their app runs); Recover unsaved design? at launch; doc.recovery_list / doc.recover / doc.recovery_discard; kill-mid-save test
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:37:33 +00:00
bherbruck and Claude Opus 5.5
bee763959c
Patterns of features: Object Type (Bodies / Features) in the rectangular, circular and path pattern dialogs; features are picked in the timeline (or pre-selected there), so a hole can be patterned with a live preview; Edit Feature shows a pattern of holes as features
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:26:59 +00:00
bherbruck and Claude Opus 5.5
f4c39320ec
One canvas panel: placing a canvas and Edit Canvas open the browser's canvas panel; the separate sketch-tool panel (which overlapped Calibrate) is gone
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:21:06 +00:00
bherbruck and Claude Opus 5.5
20fbdb7351
Document tabs: past the room for 90 pt tabs a window of tabs around the active one shows and a » button lists every open design; + opens a new design on the start page
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:13:18 +00:00
bherbruck and Claude Opus 5.5
2a54c83bf8
UI scenarios: named views (save the view from the browser, change it, restore it); targets written ahead of their features, ignored until they land: sheet metal Fold, configurations, motion study, autosave and recovery. Harness: note steps, named-view and camera checks
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:04:35 +00:00
bherbruck and Claude Opus 5.5
829c4a2811
UI scenarios, batch 3: plastic enclosure (shell, boss, lip, snap fit), appearance then STEP and 3MF export with the colour, start page sample edited, saved and reopened, two design tabs with their own undo, the S toolbox and V visibility, 3D sketch lines snapped to the model then a pipe along them, canvas inserted and calibrated, section analysis with a joint driven. Harness: until (waits for background work), make_image, widget near a label, checks for files' text, start page, open designs, design name, hidden bodies, canvas width and section. Fixes: Enter in the S command search runs the first match (it read the focus after taking it back); Sketch Palette toggles are checkboxes with their labels (click the text to toggle); a dialog test no longer panics dropping unpainted textures
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 11:04:35 +00:00
bherbruck and Claude Opus 5.5
4c3a5d9853
Joints mate face to face; Drive Joints takes the keyboard; Appearance on the engine's list
...
Joint dialog: picked origins mate as in Fusion, B's z opposite A's (two top faces put B upside
down on A, not inside it; a pin goes into its hole); the dialog's Flip turns B the other way
(sent as the command's flip, which turns B over from coinciding frames). Edit Joint shows the
same. Found by solvecraft-sketchux's scenarios.
Drive Joints: the first value box takes the keyboard with its text selected when the dialog
opens, so typing 90 and Enter drives the joint (found by solvecraft-sketchux).
Appearance: "In This Design" from appearance.list (in_design) when the engine has it; faces are
sent as face targets once the engine knows them.
Tests: face snaps mate face to face and Flip undoes it; typing into Drive Joints drives.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:57:10 +00:00
bherbruck and Claude Opus 5.5
940c425316
Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:36:53 +00:00
bherbruck and Claude Opus 5.5
a7fc1fe532
S box: command search at the cursor (fuzzy over name, id, tab and panel; recent first; pinned favourites as a mini toolbar; kept between runs); Named Views in the browser (save the camera, restore animated, rename, update, delete; Top/Front/Right/Home listed; view.save/rename/delete/list, saved in the design); Keyboard Shortcuts (File menu): rebind any command, conflicts reported, clear, reset, kept between runs; ui.shortcut control method
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:29:11 +00:00
bherbruck and Claude Opus 5.5
d0a9ef27ca
Appearance dialog (MODIFY > Appearance, A)
...
Library swatches by category (the engine's library when it offers one, else built-in looks:
metals, plastics, paints, woods, glass with opacity), the looks in this design, a colour picker
and opacity, and the objects to apply to (bodies/components or faces). A swatch dragged onto a
body or face in the viewport, or onto a body's row in the Browser, applies at once; Apply and
OK give the picked objects the current look; pre-selected bodies become the objects.
Browser: rows under a drag of another kind count as hovered, and the Browser's own drops no
longer swallow other payloads (egui's take_payload takes any type), so swatches dropped on its
rows land.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:22:53 +00:00
bherbruck and Claude Opus 5.5
187e9a97b9
UI scenarios, batch 2: edit an early sketch from the timeline, components with a revolute joint driven to 90°, sheet metal base and edge flange to flat pattern and DXF, STEP export, new design and STEP insert with a hole on the imported face, parameters table drives the model, sketch constraints workflow (dimensions, delete and undo, fix, construction), rectangular pattern. Harness: widgets found by their text through the accessibility tree, file pickers answered from the scenario's folder, model renders at shot steps (SOLVECRAFT_SCENARIO_SHOTS), query/file checks; ui.at takes a dimension. Fix: a click on a sketch point under a dimension line (a diameter through the centre) selects the point; only the dimension's text takes precedence
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 10:15:21 +00:00
bherbruck and Claude Opus 5.5
7a2b81fbf2
Environment Map Analysis: the model's faces as a mirror reflecting a studio (sky, horizon band, floor with light streaks, two light panels); toggles like the other surface analyses
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
dea1f46266
Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
319386760f
Isocurve Analysis (FusionIsoCurveAnalysisCommand): a grid of isoparametric curves each way across picked faces (the face cut by evenly spaced planes of each family), drawn while the tool is active
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
561df89b1d
Minimum Radius Analysis (sketch curves exactly, edges, faces from the mesh normals; every face when nothing is picked) and Center of Mass (all bodies or picked ones, uniform density) in the sketch INSPECT panel, with markers and labels in the viewport and their own icons
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
f79b5c1045
Sweeps and pipes along 3D sketch curves (projected, intersection and included curves): a path that uses sketch wires is followed as one chain of points by a new kernel sweep_path (rotation-minimising frame; smooth B-spline walls per profile segment, or ruled walls mitred at sharp corners and for profiles with holes); 3D sketch curves can be picked as sweep paths
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
3aacebdda4
Canvases in the 3D pass: textured quads depth-tested against the model (the model hides them, decals sit on their face), with the section cut applied; Canvas panel (opened after placing a canvas or by Edit Canvas in INSERT): opacity slider, width, angle, flip, visibility, delete
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:42:34 +00:00
bherbruck and Claude Opus 5.5
d5b8aa0375
User scenarios in the real UI, headless: scenario::Harness draws the app frame by frame into an egui context and drives it with control-channel input (toolbar starts, clicks on world/sketch/origin-plane/axis points, keys, typing, drags) and checks the model; tests/scenarios/*.json: box with fillets, shell and hole; revolve on XZ; sketch on a face and cut; mirror; delete and undo. Control: ui.at, ui.dialogInput. Fixes found by them: a shape started on an existing point (the origin, a corner) is tied to it; the Dimension tool's value is edited in place with the value selected, so typing replaces it
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:32:49 +00:00
bherbruck and Claude Opus 5.5
62dbf60eb2
Fix OK lost while a joint animates; Browser Joints folder inside the root component
...
Clicking OK during the Joint dialog's motion animation was lost about half the time: the
preview's busy spinner came and went in the dialog footer between frames, shifting the
automatic ids of OK and Cancel, so a click pressed in one frame and released in the next landed
on two different ids. The spinner's place is now always taken. Reproduced through the control
channel (6 of 14 OK clicks at different animation phases lost before, 0 of 14 after) and
covered by a test that presses OK with the preview busy and releases it once idle.
The Joints folder is drawn by component_rows for the root, after its folders (as agreed with
solvecraft-shell).
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:23:46 +00:00
bherbruck and Claude Opus 5.5
bdc15d2204
Start page and document tabs
...
Start page (shown on launch without a file, and from the house button in the application bar):
New Design, Open, recent designs (kept in the preferences, newest first) and built-in samples,
each card with a picture rendered from the design in the background. Samples are scripts of
engine commands: the sample plate plus a sheet metal bracket, a hinge assembly with a revolute
joint, a plastic enclosure (lip, bosses, rest, snap fit), a bolted flange with a parametric
circular pattern and a vent plate with a parametric rectangular pattern (test: all build
without a failing feature).
Several open designs as tabs in the application bar: each keeps its own session (undo,
selection), camera and hidden/shown items; + and Ctrl+N open a new design, opening a file or a
sample uses a new tab unless the current design is blank, closing a tab with unsaved changes
asks Save / Don't Save / Cancel. Control channel: ui.documents and ui.home (docs/control-protocol.md).
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 09:23:46 +00:00
bherbruck and Claude Opus 5.5
c8da3b78f3
Browser: rows out of view take only their space (400 bodies: 1.95 ms to 0.72 ms per frame, docs/perf.md); V shows/hides what is selected (bodies, sketches, planes and axes, components, canvases), Show/Hide with V in every menu that has it
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:56:49 +00:00
bherbruck and Claude Opus 5.5
2ac226cf0a
Line tool inference like Fusion: parallel or perpendicular to existing lines, on a line's extension and tangent to circles and arcs, shown with a dashed guide and the snap label; placing the point adds the constraint (the existing curve stays, the new line follows)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:39:22 +00:00
bherbruck and Claude Opus 5.5
d40ef5bbdc
3D sketch: with 3D Sketch on, the Line, Spline and Point tools take points off the sketch plane, snapping to model vertices, edges and faces and to drawn 3D points (segments that stay on the plane are ordinary sketch lines); drawn 3D curves are wires with fit points (sketch.line3d, sketch.spline3d: centripetal Catmull-Rom, sketch.point3d), a clicked 3D point gets a move triad (drag along X/Y/Z or parallel to the sketch plane: sketch.move3d, joined ends move together), Delete removes it; sweep and pipe paths may mix 3D curves with sketch curves; control: ui.triad, ui.worldToScreen
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:39:22 +00:00
bherbruck and Claude Opus 5.5
d2068e07a3
Selection inside sketches: double-click a curve selects the chain joined to it end to end (sketch.chain; shared or coincident ends), dimensions and constraint glyphs are selectable like other entities (Sel::SketchConstraint: Ctrl/Shift toggle, window and crossing boxes take them, Delete removes them with the rest), boxes leave out the origin, and the selection filter has sketch curves, points, dimensions and constraints
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:39:22 +00:00
bherbruck and Claude Opus 5.5
ae4570ed39
Colours in exports from materials and appearances; Appearance command
...
- Bodies export (STEP, 3MF) in the colour they are shown in: an appearance,
else the physical material's look, else the colour the body was imported
with (Document::body_color / painted). Physical materials used to export
no colour at all.
- AppearanceCommand (Modify): a colour per body ("#rrggbb" or [r, g, b];
null follows the material again), kept in the design and across renames.
- Material looks move to solvecraft-doc (material_color); the viewport draws
appearance, material or imported colour, as exported.
- Engine test: brass and red ABS bodies export, re-import with their RGB, and
keep it through open and export again.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:11:28 +00:00
bherbruck and Claude Opus 5.5
578b35e88a
Icons: use the existing canvas icon
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:03:14 +00:00
bherbruck and Claude Opus 5.5
0feb6a7d70
Context menus follow Fusion's items and order (face, edge, empty space, sketch entities; browser body, sketch, component, Bodies/Sketches folders, Origin): Edit Feature, Edit Profile Sketch, Shell, Physical Material, Save As Mesh, Remove, Export DXF, Look At, Pan/Zoom/Orbit, Show All/Unisolate, Show/Hide Planes and Axes; our extras after them
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:03:14 +00:00
bherbruck and Claude Opus 5.5
0f4a0e7053
Browser: Canvases folder (show/hide, Edit Canvas, Calibrate, Rename, Delete; a picked canvas goes with the Delete key)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 08:03:14 +00:00
bherbruck and Claude Opus 5.5
f6b42f8750
Sketch drag feel like Fusion (sketch.drag): the grabbed point goes exactly to the cursor, a line (spline, conic) slides with it, a circle or arc grabbed on its edge changes radius about its centre (an ellipse its minor radius), the centre moves the circle; the grabbed geometry is held while the rest moves as little as it can; fixed and fully constrained geometry stays. Dragging a curve of the sketch being edited now drags it (it used to start a box selection). Tests for per-entity fully-constrained feedback
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 07:50:35 +00:00
bherbruck and Claude Opus 5.5
bbd0a19260
Sketch Palette, docked at the right while sketching: line type of the selected curves (normal, construction, centerline), Look At, and options kept with each sketch (sketch.options: Sketch Grid, Snap, Slice, Show Profile, Show Points, Show Dimensions, Show Constraints, Show Projected Geometries, 3D Sketch), the degrees of freedom, Finish Sketch. Slice cuts the model at the sketch plane; Snap off places points at the cursor
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 07:50:35 +00:00
bherbruck and Claude Opus 5.5
2ec34c6e78
Sketches on body faces follow their face: the plane is a face reference found again on each evaluation (same normal, nearest the picked point), and face extrudes (Extrude on a face, Press Pull) use the linked projection of the face's edges instead of a frozen copy, so they follow when earlier features change
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 07:42:31 +00:00
bherbruck and Claude Opus 5.5
66fa6fe584
Dialogs for joints, sheet metal and plastic
...
ASSEMBLE panel (SOLID, SHEET METAL, PLASTIC): New Component, Joint, As-built Joint, Joint Origin,
Rigid Group, Drive Joints, Motion Link, Interference. Joint origins are picked by hovering:
faces snap to their centre (round faces to the centre of the nearer end), edges to their middle
(round edges to their centre), vertices to themselves, shown as glyphs with their z axis. The
Joint dialog has the motion type, angle, offsets X/Y/Z, flip, per-value limits and Animate (the
preview plays the motion); joints and drives preview on the placed model (world states).
Drive Joints moves live with a slider. Interference lists the overlaps and shows them red.
Joints appear in the timeline and in a Browser Joints folder (edit, drive, suppress, delete).
SHEET METAL tab in Fusion's layout: Flange (base, edge or contour, from the picks; height arrow
on the canvas), Hem, Unfold, Refold, Convert to Sheet Metal, Sheet Metal Rules (rule manager),
Create Flat Pattern (flat view with up/down bend lines, bend table, DXF export).
PLASTIC tab with SETUP: Boss, Lip/Groove, Snap Fit, Rest, Manage and Assign Plastic Rules; Rib,
Web and the shared solid commands on the tab.
Every feature dialog has live preview, Edit Feature and pre-selection; icons drawn in code.
Toolbar layout per tab in workspace.rs; tests for the dialog to command mapping.
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 07:29:26 +00:00
bherbruck and Claude Opus 5.5
a7f301bde6
Delete for everything: selection.delete removes sketch entities, features and sketches (with their dependents), construction planes, bodies (Remove feature), occurrences and components, and canvases in one undo step, with a dry run; Delete/Backspace and every menu's Delete go through it and ask first, listing what goes with it and what would fail; faces say Delete Face is not available yet; ui.confirm control method
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 06:44:11 +00:00
bherbruck and Claude Opus 5.5
7f9a8f2afd
Two-entity constraints move only the second pick (tangent, parallel, perpendicular, equal, concentric, coincident, collinear, symmetric, midpoint): the constraint is applied with the first entity held (solve_holding), the second keeping its size where it can (lines turn and slide, circles translate), then resizing; if the second is fixed, projected or fully constrained the first moves instead, and if neither can the constraint is refused and nothing changes; later solves hold nothing. Context-menu constraints keep the selection order; a curve picked before a point puts the point on the curve
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 06:39:38 +00:00
bherbruck and Claude Opus 5.5
4cba923bec
Large-model viewport performance: bounding-box culling for face/edge/vertex picking, cached per-body boxes and model extent, picks reused while nothing changed and skipped while the view moves (400 bodies: hover 18.7 -> 1.9 ms, orbit 21 -> 2.6 ms; docs/perf.md)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 06:24:22 +00:00
bherbruck and Claude Opus 5.5
04726747f2
Toolbar icons for the sketch commands that had the placeholder square (38 icons: project/include/intersect family, spun/iso/section curves, mid line, tangent arc, 2/3-tangent circles, arc slots, ellipse, splines, conic, text, constrainer, mirror/patterns, fillet/chamfer, offset, trim, extend, break, scale, blend, curvature and polygon constraints, AutoConstrain, curvature comb, DXF/SVG, canvas, decal), drawn in code in the sketch line style
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 06:15:33 +00:00
bherbruck and Claude Opus 5.5
584cb7e8a0
Browser: Show Dimensions for finished sketches
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 06:01:41 +00:00
bherbruck and Claude Opus 5.5
89c2c440ac
Dialog parity with Fusion: header with fold glyph, label column, Select/N selected chips, info glyph and OK greyed until valid, Fusion colours; Extrude rows Start (profile plane/offset), Direction (one side, two sides, symmetric), Extent Type (distance/all), Taper Angle; Hole rows Placement (single/multiple sketch points), Extents, Hole Tap Type (tapped size), Drill Point, Tip Angle; pattern Type switch; Mirror operation; pre-selection routes every item to the input that takes it (planar-only inputs, fillet tangent chains), with tests
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 05:51:10 +00:00
bherbruck and Claude Opus 5.5
7757e6d9c7
Construction toggle on every curve type: the selection switches as a whole (slots, polygons; to construction unless all already are), projected curves too; construction curves are drawn dashed and centerlines dash-dot; profiles update at once
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 05:36:15 +00:00
bherbruck and Claude Opus 5.5
00ddaa25f5
Canvas and Decal (FusionAddCanvasCommand, FusionAddEditDecalCommand): PNG/JPEG reference images stored in the design (base64), placed on an origin/construction plane, a sketch plane or a planar face; canvas.edit (position, width, angle, opacity, flip, visibility), canvas.calibrate (scale by a known distance), canvas.delete; drawn textured in the viewport; toolbar tools pick the file, then the plane or face
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 05:31:06 +00:00
bherbruck and Claude Opus 5.5
5b8816aa7d
Fix/Unfix on every sketch entity: points (Fix constraint) and lines, arcs, circles, ellipses, splines and conics (fixed curves hold their points and radius); ConstraintFix takes entities (fixes them all unless all are fixed); the toolbar button and the context menu act on the whole selection; fixed points never move when dragged or solved; projected geometry counts as fixed; fixed geometry is drawn green; sketch.inspect reports fixed
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 05:12:13 +00:00
bherbruck and Claude Opus 5.5
b457b6b7b6
Sketch: lines snap to horizontal/vertical near the axes (with an H/V marker; the constraint is inferred), inline dimension boxes sit beside what they measure instead of on it; Esc acts once per press (ends the line chain first, then the tool)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 05:05:48 +00:00
bherbruck and Claude Opus 5.5
187ffd0a03
Sketch dimensions drawn as dimensions: extension lines, dimension lines and arcs with arrowheads (flipped outside when tight), the value centred on the line (fx: for expressions), R/Ø leaders, angle arcs, arc-length mark, driven ones in parentheses in a muted colour; click selects, Delete removes, drag moves the text (sketch.dimension_text, kept relative to the dimension), double-click edits the value in place with parameter completion
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 04:44:24 +00:00
bherbruck and Claude Opus 5.5
4c64ceed5c
Curvature Comb Analysis (FusionCurvatureCombAnalysisCommand): combs on sketch curves (exact, from their Bézier/conic pieces) and model edges, with minimum radius; interactive tool draws teeth and envelope; ignored large-sketch timing test (sketch_perf)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 04:40:33 +00:00
bherbruck and Claude Opus 5.5
178fc47ed7
Custom title bar: on Windows and Linux the application bar is the window's title bar (drag to move with OS snapping, double-click to maximize or restore, minimize/maximize/close buttons, resize from the edges and corners); macOS keeps its traffic lights over the bar; the web build has no window buttons; ui.window control method (adapted from VectorCraft)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 04:13:38 +00:00
bherbruck and Claude Opus 5.5
9a9caa6511
Browser tree: components with an activation radio (others drawn faded), ground pin, groups in Bodies/Sketches/Construction (new, from selection, rename, ungroup, kept in the design: browser.group/ungroup/rename_group/move/order), drag and drop to reorder, into and out of groups and into another component, Ctrl/Shift multi-select, hover lights the bodies, folds remembered; occurrence Move/Copy with a gizmo and Capture Position/Revert; the viewport shows bodies where their occurrences place them
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 03:37:36 +00:00
bherbruck and Claude Opus 5.5
097217a3f3
Sketch drawing: points dropped on a curve stay on it ("on:<curve>:x,y" point arguments add a point-on-curve constraint; On hint while drawing)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 03:12:37 +00:00
bherbruck and Claude Opus 5.5
13b72bb011
Sketch drawing: clicking a model vertex projects it into the sketch (linked point) and draws from it, as Fusion does ("vertex:x,y,z" point arguments)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 02:58:43 +00:00
bherbruck and Claude Opus 5.5
063d55bdb3
Sketch drawing: a point snapped to a line's midpoint stays there ("mid:<line>" point arguments add a MidPoint constraint)
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 02:45:17 +00:00
bherbruck and Claude Opus 5.5
d729918034
Change Parameters dialog (params_dialog.rs): favourites, user parameters (unit, expression, value, comment; add, rename, delete) and model parameters grouped by sketch or feature, live validation and preview while typing, CSV/JSON import and export; parameter-name autocomplete (Tab) in every expression box: dialogs, inline sketch dimensions, manipulator values
...
Co-Authored-By: Claude Opus 5.5 <[email protected] https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 02:38:58 +00:00
