render.settings.set saves validated named render setups (camera, output size, exposure, environment) as one undo step, and render.settings.get reads them back without applying a camera. When validated render settings are the only change, the engine keeps the evaluated model instead of rebuilding it. Setups are saved under design format 21; format-20 designs read as having none. Fixes#658; refs #620.
Contributed by @0xlillith.
Co-authored-by: lillith <[email protected]>
Adds local scalar appearance and material libraries: a catalog in the io crate with safe writes, engine commands to list and apply library entries, and a library dialog in the UI, with docs.
timeline.export_script (and solidcraft-cli script) writes a design's history as a command script that solidcraft-cli eval replays into the same design, so a bug that only shows on one design becomes a one-file repro. timeline.add restores one stored feature with its id, names and references, through the same checks a design file gets when it opens.
Closes#886. SychPL's #1078 approached the same issue independently; thanks to both.
Co-authored-by: SychPL <[email protected]>
* feat: validate physical material cards with sources and conditions
* feat: query directional elastic modulus from physical material cards
* fix: register physical material validation labels in complete locales
* fix: register directional elasticity labels in complete locales
* Add German and Korean labels for the material property commands
---------
Co-authored-by: bherbruck <[email protected]>
Adds the read-only material.properties.validate command: schema_version 1 engineering material cards in SI units are checked for numerical consistency and elastic stability, with derived isotropic moduli, missing conditions and sources needing review. Nothing is assigned or saved.
Thanks @0xlillith.
* Rounded Rectangle sketch tool (#891)
A new SKETCH > CREATE command, sketch.rectangle.rounded, in the Rectangle
family: two opposite corners and a corner radius make a 2-point rectangle
whose four corners are filleted alike, as one undo step. The radius is one
parameter (one radius dimension, the other arcs equal to it), so changing it
changes all four corners. While drawing, Width, Height and Radius boxes take
typed values; typed width and height dimension the overall size between
opposite sides. Without a typed radius the corners get a fifth of the shorter
side.
Fixes#891
Co-Authored-By: Claude Opus 5.5 <[email protected]>
* Rounded Rectangle in the Simplified Chinese catalog
Co-Authored-By: Claude Opus 5.5 <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Offsets picked faces along their normals into a new surface body: planes and cylinders move exactly, other faces get a fitted B-spline within tolerance, and offsets that would fold over are refused. Adds the SurfaceOffset feature (noted under format 18), the surface.offset engine command and an Offset Surface dialog.
Closes#758.
Co-authored-by: jyviko <[email protected]>
Surface Loft lofts open or closed curve chains, one section per sketch in pick order, into surface bodies. Adds the SurfaceLoft feature (format 18 note), the surface.loft command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Sweep carries open curves and closed profile boundaries along a sketch path into surface bodies, with smooth walls along curved point paths. Adds the SurfaceSweep feature (format 18 note), the surface.sweep command, a dialog with Edit Feature support, and kernel and engine tests.
Part of #757.
Surface Revolve turns open curves and closed profile boundaries about a sketch axis into surface bodies, with cone apexes and sphere poles where a chain ends on the axis, and a closed shell made solid. Adds the SurfaceRevolve feature (format 18 note), the surface.revolve command, a dialog with Edit Feature support and analytic kernel and engine tests.
Part of #757.
surface.extrude sweeps open curve chains and profile boundaries along the sketch normal into a surface body (walls only, no caps). Saved under format 17.
Refs #757
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Icons for the surface toolset, and its planned commands registered and disabled with the issue that tracks each one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Sketch Move gets a toolbar placement in Sketch > Modify and a Move/Copy tool window with X and Y distances, an angle, an optional centre point and a Create Copy flag, replacing the context-menu route that ran the command with no parameters.
The feature history can sit in a panel on the left, with folders that hold one unbroken run of features, drag and drop as one undo step, and a resizable divider. Timeline folders save under format 17.
Adds render.backends, a metadata-only command that lists the render backends, their executors and profiles, with strict request resolution in the render crate (docs/render-backends.md).
New view.apply command restores a named view, a standard view or any camera (view state, not an undo step); the desktop viewport follows it and the browser's Restore uses it. The MCP screenshot tool takes a named view or a camera. Un-ignores the #528 regression test. Fixes#528.
Co-authored-by: jonaswre <[email protected]>
A design can define its own physical materials (material.create, material.edit, material.delete): name, density and an optional look. They work everywhere built-in materials do: assignment, mass properties, colours and configuration cells. Stored in user_materials, an additive field under format 16. Un-ignores the #554 regression test. Fixes#532.
Co-authored-by: jonaswre <[email protected]>
- Remove xtask/data/fusion-catalog.tsv and xtask/data/fusion-ids.tsv.
- Remove the legacy command-id table (crates/engine/src/legacy_ids.rs) and its use in
find_command and in the shortcut, recents and pinned-command loaders. Only SolidCraft's
dotted ids name commands; any other id is an unknown command.
- Boundary Fill's id becomes solid.boundary_fill.
- Replace the parity report with SolidCraft's own feature checklist: `cargo xtask features`
writes docs/features.md from the command registry.
- docs/oracle.md, docs/step-import.md (corpus section) and docs/iges-import.md: reference
results are being rebuilt on analytic and open-source (FreeCAD) values; see #292.
`cargo xtask oracle` and `cargo xtask step-corpus [--iges]` write these placeholders.
- AGENTS.md, CLAUDE.md, CONTRIBUTING.md, README.md, ROADMAP.md and the book describe
SolidCraft as independent, with reference tests on analytic values and open-source tools,
and agents do not drive or extract data from commercial CAD products.
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
Co-authored-by: Claude Opus 5.5 <[email protected]>
selune