 bherbruckandClaude Opus 5.5
|
f40356a74f
|
Never lose work: atomic saves (temporary file, flush, rename) keeping the replaced version as <file>.bak; autosave of unsaved changes into a recovery folder (every 5 min, preference autosave_minutes, and after commands over 1.5 s; skipped when unchanged; entries locked while their app runs); Recover unsaved design? at launch; doc.recovery_list / doc.recover / doc.recovery_discard; kill-mid-save test
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 11:37:33 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
940c425316
|
Accessibility Analysis: faces a tool coming along a direction reaches (facing it, nothing above: a depth map of the model seen from that direction, tested per pixel on the GPU) shade green, the rest red; the analyses (zebra, draft, curvature map, environment map, accessibility, minimum radius, isocurves, curvature comb, center of mass) also on SOLID INSPECT, and Interference on sketch INSPECT; path patterns follow 3D sketch curves through the same path chain as sweeps (path_segments_3d folded into path_points)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 10:36:53 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
7a2b81fbf2
|
Environment Map Analysis: the model's faces as a mirror reflecting a studio (sky, horizon band, floor with light streaks, two light panels); toggles like the other surface analyses
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 09:42:34 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
dea1f46266
|
Zebra, Draft and Curvature Map analyses (view state on the session, no undo step): the GPU shades the model's faces with reflected stripes, draft-angle bands to a pull direction (green, yellow within the angle, red) or a blue-green-red curvature map; the toolbar button toggles each
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 09:42:34 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
d2068e07a3
|
Selection inside sketches: double-click a curve selects the chain joined to it end to end (sketch.chain; shared or coincident ends), dimensions and constraint glyphs are selectable like other entities (Sel::SketchConstraint: Ctrl/Shift toggle, window and crossing boxes take them, Delete removes them with the rest), boxes leave out the origin, and the selection filter has sketch curves, points, dimensions and constraints
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 08:39:22 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
c2309eb43b
|
Joints engine: joint origins that snap to faces, round ends or points (re-found on every solve, so joints follow edits), joints (rigid, revolute, slider, cylindrical, pin-slot, planar, ball) with values, limits, flip and offset, As-built Joint, Rigid Group, Drive Joints, Motion Link, a joint-graph solver from grounded occurrences (degrees of freedom per occurrence, loop conflicts reported), Interference between bodies
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 02:59:56 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
1988594a13
|
Section Analysis (FusionHalfSectionViewCommand, INSPECT): cut the view by an origin plane, construction plane or planar face with an offset (drag arrow) and flip; the inside of cut bodies shows a flat cap colour; live while the dialog is open, Remove Section on the right-click menu; viewport shader validated in a test
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:45:44 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b5051b2744
|
Rib and Web (to the next face or a depth, flip), Emboss/deboss on planar faces (EmbossCmd), Replace Face onto a parallel plane or face, Align (point to point, face to face), Remove (SoftDeleteCommand), timeline Copy/Paste of features (independent copies: own dimension parameters and input names, references remapped, optional translation)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-08 00:42:26 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
beab69cfb2
|
Measure tool (I): pick one or two vertices, edges or faces for length/area/position, minimum distance with ΔX/ΔY/ΔZ and a line in the view, and the angle between planar faces or straight edges (MeasureCommand items, engine test); theme switch from the control channel no longer leaves stale scene colours
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:54:36 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
97d03e3824
|
Components: occurrences with transforms (instances and Paste New copies), world placement of the model (Session::world_state for display, measure, export), active component authoring frame, move/ground/capture/revert positions, move bodies and sketches between components, rename/delete, migration of older designs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:10:41 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b3ca8911eb
|
Holes at sketch points (one feature, many holes, following the points) and threaded holes; cosmetic threads (FusionThreadCommand, ISO metric, model.threads); components groundwork: the document is a component tree (New Component, Create Components from Bodies, active component, component.list)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 23:00:57 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
b2b9331415
|
Drag manipulators and automatic operation: extrude (two arrows when symmetric), fillet/chamfer, shell and move arrows drag their value with round-step snapping (Alt/Ctrl: free) and the dialog follows; Extrude operation "auto" (engine) and the dialog follow the geometry: into a body cuts (red), out of one joins, free space makes a new body; a manual choice sticks
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:43 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
9301bc4210
|
Sketch projection: Project (edges, face loops, body silhouettes, vertices, other sketches' curves and points, origin, axes, planes), Intersect (body/face/edge section with the sketch plane) and Include 3D Geometry as linked reference geometry: fixed, purple, re-resolved on every recompute (follows upstream edits, keeps ids when the shape is unchanged, flagged when the reference is lost), usable in profiles, constraints and dimensions; Break Link; sketching on a face auto-projects its edges (sketch.auto_project); drawing on a model vertex or edge projects it
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:58:18 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
d44083d1cc
|
Live operation previews: open feature dialogs (new or Edit Feature) evaluate on a scratch session off the UI thread (Session::preview, no document or undo changes) and draw the result in place: new surface tinted, removed material as a translucent ghost; errors show in the dialog and keep the last good preview; a failing join/cut still shows its tool body
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 21:09:16 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
97e73b0935
|
Selection feedback and origin: hover and selected highlights (theme tokens), origin planes/axes/point at a fixed screen size with browser eye toggles, click-to-pick sketch planes and faces with camera animation (Finish Sketch returns), multi-select dialog inputs with pre-selection, tangent chains and face-to-edges, window/crossing box selection, shell/draft/mirror/hole dialogs
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
|
2026-10-07 20:00:17 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
8a811f8eff
|
M0: desktop app: toolbar, browser, timeline, GPU viewport, view cube, sketch tools, dialogs, control channel
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
2026-10-07 17:54:58 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
0983f80f01
|
M0: solvecraft-cli (run, eval, snapshot, exec, commands, recipe, oracle)
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
2026-10-07 17:32:44 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
cdca1e59f3
|
M0: engine command registry, file formats, view math and CPU renderer
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
2026-10-07 17:30:37 +00:00 |
|
|
bherbruckandClaude Opus 5.5
|
dafce1f4e2
|
M0: workspace, geometry foundation, sketch constraint solver, kernel boundary
Co-Authored-By: Claude Opus 5.5 <[email protected]>
|
2026-10-07 17:01:29 +00:00 |
|