bherbruckandClaude Opus 5.5
29258767ce
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning. Co-Authored-By: Claude Opus 5.5 <[email protected]>
20 lines
2.4 KiB
JSON
20 lines
2.4 KiB
JSON
{
|
|
"description": "A 76.8 x 89.3 x 2.4 lid plate (corner at x = 100) with its four vertical edges rounded 3 mm, a 1.5 mm skirt ring 3 mm high on it (outside 102.65..174.15 x 2.65..86.65), a 68 x 61 window and a 44 x 10 slot cut through, and a 22 x 6 notch in the skirt. Four 1.6 x 6 x 11.7 ribs are then joined standing on the plate (z = 2.4) over the skirt, each flush with a side of the window (x = 104.4 and x = 172.4). The joins needed retries that displaced the tool, and one left a zero-thickness slit through the skirt and plate at y = 25.5, far from any rib (#616). Each rib adds 1.6*6*11.7 - 1.35*6*3 = 88.02 mm3 and nothing changes away from it: 6703.5222 + 4 * 88.02 mm3.",
|
|
"commands": [
|
|
{"command": "solid.box", "params": {"corner": [100, 0, 0], "length": 76.8, "width": 89.3, "height": 2.4, "body_name": "Lid"}},
|
|
{"command": "solid.fillet", "params": {"edges": [[100, 0, 1.2], [176.8, 0, 1.2], [100, 89.3, 1.2], [176.8, 89.3, 1.2]], "radius": 3}},
|
|
{"command": "sketch.create", "params": {"plane": "XY", "offset": 2.4, "name": "Skirt"}},
|
|
{"command": "sketch.rectangle.two_point", "params": {"p0": [102.65, 2.65], "p1": [174.15, 86.65]}},
|
|
{"command": "sketch.rectangle.two_point", "params": {"p0": [104.15, 4.15], "p1": [172.65, 85.15]}},
|
|
{"command": "sketch.finish", "params": {}},
|
|
{"command": "solid.extrude", "params": {"sketch": "Skirt", "profiles": [{"point": [103.4, 40]}], "distance": 3, "operation": "join", "targets": ["Lid"]}},
|
|
{"command": "solid.box", "params": {"corner": [104.4, 5.4, -1], "length": 68, "width": 61, "height": 8, "operation": "cut"}},
|
|
{"command": "solid.box", "params": {"corner": [116.4, 72, -1], "length": 44, "width": 10, "height": 8, "operation": "cut"}},
|
|
{"command": "solid.box", "params": {"corner": [127.4, 84, 2.4], "length": 22, "width": 6, "height": 4, "operation": "cut"}},
|
|
{"command": "solid.box", "params": {"corner": [102.8, 14, 2.4], "length": 1.6, "width": 6, "height": 11.7, "operation": "join", "name": "Rib1"}},
|
|
{"command": "solid.box", "params": {"corner": [102.8, 48, 2.4], "length": 1.6, "width": 6, "height": 11.7, "operation": "join", "name": "Rib2"}},
|
|
{"command": "solid.box", "params": {"corner": [172.4, 14, 2.4], "length": 1.6, "width": 6, "height": 11.7, "operation": "join", "name": "Rib3"}},
|
|
{"command": "solid.box", "params": {"corner": [172.4, 48, 2.4], "length": 1.6, "width": 6, "height": 11.7, "operation": "join", "name": "Rib4"}}
|
|
]
|
|
}
|